SAPSYS Terminal Logon

Hi everyone,
We noticed that sometimes the user SAPSYS logs on default to the SAP System.At that time System will be hanging some time it will be happening regularly how to avoid these situtation.mine environment is ecc5.0,aix with oracle.
Thanku

Hi,
At the time of login to sap its showing in sm04 the user SAPSYS logs on default(its showing login into some 127.**ip address) to the SAP System .At that time System will be hanging some time it will be happening regularly how to avoid these situtation.mine environment is ecc5.0,aix with oracle.
Thanku

Similar Messages

SAPSYS, Password logon no longer possible

I get an error info from log file dev_rfc0, it's "User: SAPSYS (Client: 000) Password logon no longer possible - too many failed attempts".
Same error info can also be found in ST22, shown below:
Runtime Errors: CALL_FUNCTION_REMOTE_ERROR
Short text: "Password logon no longer possible - too many failed attempts"
Please advise on how to correct it. Thanks

Hi,
Ya Just unlock the user.
Cheers
Deepanshu

User logon report

Hi all,
I need some logic to achive report scenario
userwise total logon time for the day for the terminal.
Sample Data
Date                     Time             User      Terminal     Logon Logoff
20100403     125622     usr01     User05     LOGON SUCCESSFUL
20100403     125804     usr01     User06     LOGON SUCCESSFUL
20100403     130152     usr01     User05     USER LOGOFF
20100403     131653     usr01     User06     USER LOGOFF
20100403     134625     usr01     User05     LOGON SUCCESSFUL
20100403     142720     usr01     User05     USER LOGOFF
20100403     144108     usr01     User05     LOGON SUCCESSFUL
20100403     144558     usr01     User05     USER LOGOFF
20100403     154432     usr01     User07     LOGON SUCCESSFUL
20100403     155349     usr01     User07     USER LOGOFF
20100403     180135     usr01     User05     LOGON SUCCESSFUL
20100403     180546     usr01     User05     USER LOGOFF
20100404     81936     usr01     User05     LOGON SUCCESSFUL
20100404     82012     usr01     User05     USER LOGOFF
20100404     83511     usr01     User05     LOGON SUCCESSFUL
20100404     83620     usr01     User05     USER LOGOFF
20100404     83620     usr01     User05     LOGON SUCCESSFUL
20100404     83937     usr01     User05     USER LOGOFF
20100404     83916     usr01     User05     LOGON SUCCESSFUL
20100404     91603     usr01     User05     USER LOGOFF
20100404     93835     usr01     User05     LOGON SUCCESSFUL
20100404     93900     usr01     User05     USER LOGOFF
20100404     155750     usr01     User05     LOGON SUCCESSFUL
20100404     163909     usr01     User05     USER LOGOFF
Thanks,
Kaleel

hmm r u loading this data in some info-provider?
anyway in system use t-code SUIM
here u can get user logon details, password change history & much more

OAM process takes 100% CPU (strange SQL in it)

Hi!
I have noticed on our PROD that on eprocess is taking more then 7 hours with 100% CPU load. Here is brief detail about it:
03:08:12 apps@PROD> @si 547
Current SQL....have result if session is active....
SQL_FULLTEXT
Select count(distinct(R.Request_ID)) From Fnd_Concurrent_Programs_vl CP, Fnd_User U, Fnd_Concurr
ent_Requests R, Fnd_Responsibility_Tl RES, Fnd_Application_vl A
Elapsed: 00:00:00.06
SID_SERIAL STATE      OSUSER     TERMINAL   LOGON           SEC_WAIT LAST_CALL
547,42977 WAITED SHO prod       unknown    12.01 12:50:54     26423     26425
            RT TIME
Elapsed: 00:00:00.01
SID_SERIAL      AUDSID DBPID APPPID USERNAME   MODULE        ACTION          STATUS   STATE
547,42977   11087548 10585 1344   APPS       OAM                           ACTIVE   WAITED SHO
                                                                                       RT TIME
Elapsed: 00:00:00.01
03:15:41 apps@PROD> As you can see, SQL is prety strange and it's plan is several Gigs(!!!) Because module is OAM I have no guts to kill it just like that. Is there any way to see what is this really and could it be killed (Do I have to restart concurrent) or what?
THX in front.
Damir Vadas
Edited by: Funky on Jan 13, 2009 3:15 AM

After some KGB approaches, one user with System Administrator responsibility has admit that he has run by mistake u query!
So be aware whom do you expose System Administrator responsibility!
Case closed!

"Program terminated in remote system NONE: Logon failed" when adding a new table

Hello,
I set up a replication flow from a SAP ERP 6.0 EHP7 with SAP ASE 16.0 source to SAP HANA 1.0 rev 82 target
I am using a standalone SLT system NetWeaver 7.0 with DMIS 2011_1_731 (with SP 1 to 7).
I have 100 tables to replicate.
I succeeded to set up replication for 57 tables. These tables are replicating properly.
Whenever I try to add a new one (with LTRC transaction, Data Provisioning -> Start Replication), the new table is marked as 'Failed' after a little while.
When I press 'Show Error Log' button I got an obscure error message:
"Program terminated in remote system NONE: Logon failed "
I do not understand this message. I checked both on SAP ASE source and SAP HANA target. I am still able to connect against both source and target.
Can you please tell how to troubleshoot this error.
Thanks in advance,
Christian

First thank you for answering my questions. I really appreciate your answers.
I rechecked the documentation.
"Application Operations Guide SAP Landscape Transformation Replication Server Document Version: 2.3 – 2014-07-08"
Page 29 - 30
3.5.2.2 Data Transfer Jobs
This section explains the relationship between the number of data transfer jobs and the number of available background work process.
Data transfer and data transformation processing on SLT server system is accomplished by the background work processes of the underlying SAP NetWeaver ABAP application server. Each job occupies 1 background work process in the SAP LT Replication Server system. For each configuration, the parameter Data Transfer Jobs restricts the maximum number of data load job for each mass transfer ID (MT_ID). In total, a mass transfer ID (MT_ID) requires at least 4 background jobs to be available:
 One monitoring job (master job)
 One master controller job
 At least one data load job
 One additional job either for the migration objects definition, access plan calculation or to change configuration settings in the Configuration & Monitoring Dashboard
Example
If you set the parameter Data Transfer Jobs to 04 in a configuration “SCHEMA1”, a mass transfer ID 001 is assigned. As a result, the following jobs should be in the system:
1 Master controller job: /1LT/IUC_REP_CNTR_001
 At most 4 parallel jobs for MT_ID 001: /1LT/IUC_LOAD_MT_001_001/~002/~003/~004
When configuring your data load or replication scenario, consider the following:
 Do not define more data transfer jobs than the number of available application server background work processes. If all available background work processes are already occupied by jobs, any other job will have to wait until a free work process becomes available. This can lead to long wait times until a new activity (for example creating triggers) can start, and can also result in significantly increased latency times for data replication.
 The number of dialog work processes in the source system corresponds 1:1 with the number of data transfer jobs in the SAP LT Replication Server system.
 Besides the work processes allocated by the data transfer jobs you need to provide additional available work processes for controller and monitoring jobs, the migration objects definition, access plan calculation or to perform configuration changes, and so on.
Sizing for SAP LT Replication Server involves determining how many work processes are required to perform the initial load of data into the target system within an acceptable timeframe, and accomplish the change capturing and the transfer of data changes to the target system within expected latency times.
Ensure that you add enough additional work processes to allow other required SAP LT Replication Server jobs to run.
Finally, you map the number of required application server work processes to their system resource consumption (CPU, memory, disc space) using the formulas provided by the SLT Sizing Guide.
With the simple formula below, you can calculate the number of required application server work processes (WPs) on the SLT Server for each active SLT configuration.
The number of required work processes can be determined by adding
 The Number of required data transfer jobs ,
 plus one background work process for Central Master (Monitoring) Job (only one per system!),
 plus one background work process for Master Controller Job,
 plus 3-5 additional empty background work processes (recommended per configuration),
 plus approx. 3 dialog work processes (recommended for each configuration).
Note: A lack of available free application server work processes can negatively affect the data load or data replication processes.
To summarize everything, the number of 'Data Transfer Jobs' must be set depending of the number of source tables, it is not the actual number of tables.
Assume that for my 100 tables I use 10 'Data Transfer Jobs' :
- The number of work processes on the SLT server would be 20. I took the simple formula of the documentation:
10 data transfer jobs ,
+ 1 background work process for Central Master (Monitoring) Job (only one per system!),
+ 1 background work process for Master Controller Job,
+ 5 additional empty background work processes (recommended per configuration),
+ 3 dialog work processes (recommended for each configuration).
- The number of dialog processes on the source server would be 10 ( equal to the number of 'Data Transfer Jobs')
Am I correct ?
Regards,
Christian

SCCM 2012 R2 reporting error: "The DefaultValue expression for the report parameter 'UserTokenSIDs' contains an error: A specified logon session does not exist. It may already have been terminated. (rsRuntimeErrorInExpression)"

Hi,
I have two SCCM environments under same active directory domain and one service account have been used for SCCM configurations on both the environments (QA and PRODUCTION). I am facing similar error as mentioned above while trying to fetch reports on
PRODUCTION site, but the QA site is working fine, though same service account have been used for configuring both. While looking at the reportserverservice_<date> log on my Production DB server i see the following error
"processing!ReportServer_0-3!2124!01/02/2015-09:09:30:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: , Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during
report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot read the next data row for the dataset DataSet1. ---> System.Data.SqlClient.SqlException: Conversion failed when converting the nvarchar value 'Override
Default' to data type int."
My DB and SCCM primary site are different and the reorting services point is installed on remote DB server. Please help me resolving the issue.
Troubleshooting performed:
1.Disabled the registry key 'EnableRbacReporting' from HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\SRSRP to 0 and then restarted SSRS service and the reporting worked for some minutes after that the registry key reverted back to 1 automatically and
reporting started throwing errors again.
2. Checked with the permissions on DB whether or not 'sysadmin' role is assigned to the SCCM service account.
3. re-registered the SQL management Provider WMI class.
mofcomp.exe “C:\Program Files (x86)\Microsoft SQL Server\110\Shared\sqlmgmproviderxpsp2up.mof”

Hi All,
Finally found exact solution to the reporting error.
Error: while launching SCCM reports (both from Console and web based) an unexpected error occured with error message as "The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: A specified logon session does not exist.
It may already have been terminated. (rsRuntimeErrorInExpression)"
Solution: This is password replication issue for the domain account used to configure reporting services point in SCCM. If your SQL SSRS reporting services instance and databse runs with local default account whereas the reporting services point on SCCM
primary site is configured with domain account, (As in My case) you need to perform the following in order to get rid of the error.
Launch 'Reporting Services Configuration Manager' from the SQL SSRS box(either Local or Remote), Connect to Report Server Instance->Go to 'Execution Account' tab->Specify the 'Execution Account' as domain account and password which is used to configure
Reporting Services Point in SCCM Primary Site, and then click apply.
Now Lauch the report either way (Web based or from Console), the error will disappear and all your default reports will execute perfectly as before.

Terminal Service - enable the "Start the following program at logon" cause my remote printer won't redirected?

After I enable the "Start the following program at logon" on my User account windows 2003 Server R2 cause my remote printer won't redirected when the Remote User is logon to the Server, I don't know why? I checked the Terminal Services Configuration already
and everything is fine.
And for you information, If I disable the "Start the following program at logon", the printer is redirected again, did I miss something in here?
Thanks
dkirwan

Hi,
I suspect that this application conflicts with Terminal printer redirection, whether all applications using "Start the following program at logon" option have this
issue or not. You may try another application to see if the issue is gone.
If your client PC is Windows XP, you may need install the Remote Desktop Connection 7.
http://support.microsoft.com/kb/969084/en-us
Technology changes life……

Logon rejected for Unable to obtain Terminal Server User Configuration. Error: Not enough resources are available to complete this operation.

Error: Logon rejected for Unable to obtain Terminal Server User Configuration. Error: Not enough resources are available to complete this operation.
The problem is that the SharePoint server will
function just fine for a week or so and then suddenly when a new user tries
to log on they get an error message indicating that not enough resources areavailable to
log them on and also user will to credential prompt while accessing share point site .
Raj

Hi,
According to the error message, please use performance monitor to diagnose if it is a memory-related bottleneck and you can use the counters of the memory part in the article below:
https://technet.microsoft.com/en-us/magazine/2008.08.pulse.aspx
In addition, it may be due to thousands of open connections to the server are in a TIME_WAIT state. You can run "netstat -an" command on the affected server and client. If you see mutiple connections in the TIME_WAIT state, you can follow the article
to increase the number of TCP/IP connections:
https://msdn.microsoft.com/en-us/library/ee377084(v=bts.70).aspx
Furthermore, if you are running windows server 2003, please make sure that you have installed the KB 948496 and stop all services that you don't need.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

After Logon on Database Trigger Not Working From Client Terminal

Hi Every One
I Have a Problem, I'am Using Oracle 10g R2, I'd Written After Logon on Database Trigger, I'd Written The Trigger Under The Under The User With DBA Privileges, and it is work Fine, but it is work only when i Logon On The Database from The Server Terminal with any user, and If Logon From any Other Terminal It Is Not Work,
Can any One Know The Reason, Please Help me
Yasser Mokhtar

Please post the trigger code.

Remote Desktop disconnects immediately. Error 4005; Windows logon process has unexpectedly terminated.

Hi, I have always been able to remote into my pc (Win 8.1) using remote desktop. Just recently this stopped working. Either I get a blank screen for about 10 seconds and then it closes or the connection closes immediately. Every time this happens I get error
4005 in the event log; Windows logon process has unexpectedly terminated. It seems the remote desktop stopped working after the last set of Windows updates were applied. But no other web searches indicates anyone else has had this problem recently. I've also
read the Windows Server document or error 4005 which suggests my registry may be corrupt or a service may be stopped but this does not seem to apply to my situation. I'm stumped and without being able to remote into my pc from my office I can't do my job.
Any suggestions would be greatly appreciated.
UPDATE: After installing a new required Windows update and a bunch of optional Windows updates (that I had been ignoring), the problem has been fixed. I'm guessing which ever Windows update broke Remote Desktop was fixed in the latest update(s).

Hi arzoo1,
So you have checked the steps mentioned in the article below?
Event ID 4005 — Windows Logon Availability
You may take a try with Dism /online /cleanup-image /resorehealth command and then check if issue insists.
For Windows Update related, please consider system restore or startup repair.
Try to boot into clean boot and then remote again to check if issue insists.
Best regards
Michael Shao
TechNet Community Support

Microsoft // Winlogon 4005 (The Windows logon process has unexpectedly terminated) on one Windows Server 2012 VM with working RDS roles installed

Hello experts,
I have deployed all essential RDS roles and features on one Windows Server 2012 Virtual Machine
a few months ago and I recently ran into issues with users not being able to access it through RDP all of a sudden after entering credentials successfully.
Every time that happens I get an event ID Winlogon 4005 (The Windows logon process has unexpectedly
terminated). I am also receiving but not all the time event ID 6000 and 6003 referring to being unable to handle critical or normal events from AUinstallAgent.
Any help on this problem would be greatly appreciated.
Thank you in advance for your support.
Massimiliano

Hello experts,
I have deployed all essential RDS roles and features on one Windows Server 2012 Virtual Machine
a few months ago and I recently ran into issues with users not being able to access it through RDP all of a sudden after entering credentials successfully.
Every time that happens I get an event ID Winlogon 4005 (The Windows logon process has unexpectedly
terminated). I am also receiving but not all the time event ID 6000 and 6003 referring to being unable to handle critical or normal events from AUinstallAgent.
Any help on this problem would be greatly appreciated.
Thank you in advance for your support.
Massimiliano

How to trace logon terminal

Hi,
I have a strange client copy happened in my R/3 system(4.7Enterprise).This was done by somebody from production system to quality system.As a result of this we lost some data in quality.We were able to see the 1)from which userid2)time
and duration etc..details from SCC3.But we require the terminal from which client copy was done.Is there anyway to see this information,any table which keeps the terminal id logs? Please help.
Thanks in advance
Syamkrishnan

Hi,
Thank you very much Alex and Manohar.I have awarded points for your suggestions.We have not activated security audit logging.I have accessed transaction both STAT directly and through ST03N(Go to ST03N> Expand Detailed Analysis> Select Business transaction analysis --> Give the user name in the User field,as said by manohar )
but couldn't get any logs.We could obtain the logs upto last two days from STAT,but since the incident was happened even before the last two days we couldn't see any logs related to that.
But I would like to share an important information which I found .
You could find the information related in table USR41 (TERMINAL...)which will record the last logon information.But if you are asking for the historical data :
Sorry for system will not keep all the history unless you confirm that you could use SM19 to activate the security audit log and read it via SM20 and note 539404 is for your reference(security audit suggested by alex :-)thanks alex).
Thanks&Regards
Syamkrishnan

WebSAPConsole , telnet serever ,RF terminal and SAP logon screen

What would be the easiest way to connect RF terminal(character based) to an SAP system.
Of course it is via WebSAPconsole. As far as I red WebSAPconsole guide if I want to use it to connect character based RF terminal is the same as preaviously SAPconsole(under e.g.SAP enterprise 4.7 ext2.)
1.st install telnet server (best SLnet 2.6RF from Seattle LABS) and then configure In SAP console administrator in Control panel entered corresponding system ip,sysnr and transaction code(from saplogon)
However on RF terminal SAP logon screen does not appear. But only telnet prompt.
What to do? Should the telnet server and SAP console be on an other machine than SAP server(ECC6)?

Hi Thomas Kremer,
Can you help me to solve this issue!?
I´m facing with same error then you. I did a homogenous system copy and after I finish this SAPINST I install the saplogon and of course I try to accede to SAP system and the first thing that display in system is that short dump --> dynpro_itab_error
What´s this?! How you solve this issue... can you remmember? (I know that already was a two years ago but even so if you remember this can you share with me!?).
Best regards,
João Dimas - Portugal

Windows 2008 Terminal Server "user must change password at next logon" problem with Windows 7 client.

Hi,
I have a fully patched Windows 2008 SP2 Terminal Server and a fully patched Windows 7 client.
I have logged into the Windows 2008 SP2 Terminal Server server with a test account via RDC before.
When I try to log in via RDC to the 2008 TS with a test account which has been marked with the setting "User must change password at next logon" I get the RDC message "You must change your password before logging on the first time. For assistance, contact your system administrator or technical support." I need to force the user to change their password once it has been issued, any ideas on how this can be done?
Thanks,
Dan

This does not resolve my issue all the way. I'm having the same problem; When i'm "deploying" users, i always want the users to set their own passwords. Ok, so I then set the auth mode to "RDP Security layer". It seemed to work fine, and it does for that
special purpose.
Just like Daniel, my clients are connecting to our terminal server from several/different "customer-domains" So, they can't logon locally(on their local computer) and change their password, it has to be done THROUGH the terminal server.
But if I turn on RDP Security Layer, users can't use remoteapp through tsgw they only get: "Your Remote Desktop Connection Failed because the remote computer cannot be authenticated" Any ideas?
Also, our terminal servers is round robin based in a farm. So users connect to: tsfarm.domain.com(yes, public a-record which resolves to two internal adresses) This is because, we're using a wilcard *.domain.com as SSL certificate.
But, when i'm using this, our clients sometimes get double auth when they login. I only get the double auth when tsfarm.domain.com resolves to server A, but the session broker wants the user to be on server B.(load balancing)
This does not occur when SSL is enforced, any ideas?

App-v 5.0 sp3 Publish application icons/ shourtcut missed on 2nd time logon on terminal server 2012 r2 with roaming profile with folder redirection

1. I updated app-v 5.0 sp3 environment on 2012 R2. Roaming profile users with folder redirection logon fine at first time applications icons available but at 2nd logon applicaitons icons are missed while packages are available. we are using existing
roaming profiles with folder redirection which are running in current environment through APP-V 4.6 2008 R2. Please suggest work around to resolve this issue.
2. TS Nodes of 2008 R2 with App-v 4.6 running fine on Microsoft 2012 private cloud but we are facing performance issue (stuck, slow logon, slow performance etc) when we are moving in new 2012 R2 private cloud. SAP, SCSM and other sevices are running
fine, please provide solution.
Thanks

1.) What are you doing with the App-V Icon path? e.g. %LOCALAPPDATA%\Microsoft\AppV\Client\Integration\<GUID>\Root\AppVClientUX.exe.0.ico ?
I guess you could workaround it with deploying the icons to a central location and then pointing to the icon out on a central share. Or put the icons in a machine location...I haven't had this issue but that's just off the top of my head.
2.) I have not used App-V 4.6 in an environment like yours BUT would pre-caching the applications be possible? Any chance you'll be moving those apps into App-V 5.0 soon?
PLEASE MARK ANY ANSWERS TO HELP OTHERS Blog:
rorymon.com Twitter: @Rorymon

SAPSYS Terminal Logon

Similar Messages

Maybe you are looking for