SAPUI5 , how to access data with autocomplete request

Dear All,
I have created a OPENUI5 page with sap.autocomplete,
Also a 'page with flow logic' with onRequest defined.
How could the two be linked together, such that the autocomplete will make request to the 'page with flow logic'.
Thanks

Solved.
Done through JsonModel loaddata

Similar Messages

How to access date with respective to different language

Hello,
In my database i stored the date in the following format1992-03-28 13:07:53.000.
In My application user can use upto 8 languages.Now the problem is when the user logged in with english the date format will be like 5/26/08(dd/mm/yy).but me convert this format to 05/26/2008(dd/mm/yyyy) through and use the following syntax for constrains dateformat(MaoDate,'mm/dd/yyyy') = '05/26/2008'
Now my problem is for some other language the date format is like Arr 20 07 or 25.05.92.But me wrote the code conversion only for the format mm/dd/yy.
Is there any general way to acces the date for all the languages?
Please help Me.
Thank You!!!

Hello sathish,
Now the problem is i will get the string like 5/8/08 or Jan 21 07 .... from My GUI. But me wrote code only to convert from 5/8/08 to 05/08/2008...Bcz date comparison was happening in dd/mm/yyyy format.
But whenever i am getting data like Jan 21 07 from GUI my conversion is not happening.And now the date constrain is dateformat(MaoDate,'mm/dd/yyyy') = 'Jan 21 07' i mean my code checking the date format with dd/mm/yyyy with date Jan 21 07.
So i need to write a code to convert all the regional format to dd/mm/yyyy.So is there any common way to comapre the date with all regional format!!!!!!
Thank You!!

How to access Data Guard option in Oracle 10g OEM

Hi All,
I have Oracle 10g ENTERPRISE EDITION on Unix envoirement. I want to setup logical standby Database through Data Guard technology. But when I brows through OEM I do not find Link for DATA GUARD????
1) How to access Data Guard option from oracle 10g OEM.
2) Does It come with Enterprise Edition OR I have to install it separately.
Regards,
Darshan

I am managing almost everything through EM Grid Control. It is easy to setup and configure.
Anyways, if you have read the documentation on
Oracle® Data Guard Concepts and Administration and setup your environment accordingly then you should not have any problems. Atleast I can assure you that your production database will not be affected by it.
Just make sure that you follow each step and read thoroughly. If you have spare machines then you can test and record your configuration before performing it on your production db. This link will provide you with the information on DataGuard.
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14239/concepts.htm
If you think that way then you will never be able to do any new stuff since you will always fear that something might go wrong. Go ahead pal, try it on test machines and you will know that it is not that difficult.
There are real experts who help people like us in this forum and I know that they are doing a pretty good job.
All the best.
Rgds
Adnan

Open Hub: How-to doc "How to Extract data with Open Hub to a Logical File"

Hi all,
We are using open hub to download transaction files from infocubes to application server, and would like to have filename which is dynamic based period and year, i.e. period and year of the transaction data to be downloaded.
I understand we could use logical file for this purpose. However we are not sure how to have the period and year to be dynamically derived in filename.
I have read in sdn a number of posted messages on a similar topic and many have suggested a 'How-to' paper titled "How to Extract data with Open Hub to a Logical Filename". However i could not seem to be able to get document from the link given.
Just wonder if anyone has the correct or latest link to the document, or would appreciate if you could share the document with all in sdn if you have a copy.
Many thanks and best regards,
Victoria

Hi,
After creating open hub press F1 in Application server file name text box from the help window there u Click on Maintain 'Client independent file names and file paths' then u will be taken to the Implementation guide screen > click on Cross client maintanance of file name > create a logical file path by clicking on new entiries > after creating logical file path now go to Logical file name definition there give your Logical file , name , physical file (ur file name followed by month or year what ever is applicable (press f1 for more info)) , data format (ASC) , application area (BW) and logical path (choose from F4 selection which u have created first), now goto Assignment of physical path to logical path > give syntax group >physical path is the path u gave at logical file name definition.
however we have created a logical path file name to identify the file by sys date but ur requirement seems to be of dynamic date of tranaction data...may u can achieve this by creating a variable. U can see the help from F1 that would be of much help to u. All the above steps i have explained will help u create a dynamic logical file.
hope this helps u to some extent.
Regards

How to export data with column headers in sql server 2008 with bcp command?

Hi all,
I want know "how to export data with column headers in sql server 2008 with bcp command", I know how to import data with import and export wizard. when i
am trying to import data with bcp command data has been copied but column names are not came.
I am using the below query:-
EXEC master..xp_cmdshell
'BCP "SELECT * FROM   [tempdb].[dbo].[VBAS_ErrorLog] " QUERYOUT "D:\Temp\SQLServer.log" -c -t , -T -S SERVER-A'
Thanks,
SAAD.

Hi All,
I have done as per your suggestion but here i have face the below problem, in print statment it give correct query, in EXEC ( EXEC master..xp_cmdshell @BCPCMD) it was displayed error message like below
DECLARE @BCPCMD
nvarchar(4000)
DECLARE @BCPCMD1
nvarchar(4000)
DECLARE @BCPCMD2
nvarchar(4000)
DECLARE @SQLEXPRESS
varchar(50)
DECLARE @filepath
nvarchar(150),@SQLServer
varchar(50)
SET @filepath
= N'"D:\Temp\LDH_SQLErrorlog_'+CAST(YEAR(GETDATE())
as varchar(4))
+RIGHT('00'+CAST(MONTH(GETDATE())
as varchar(2)),2)
+RIGHT('00'+CAST(DAY(GETDATE())
as varchar(2)),2)+'.log" '
Set @SQLServer
=(SELECT
@@SERVERNAME)
SELECT @BCPCMD1
= '''BCP "SELECT
* FROM   [tempdb].[dbo].[wErrorLog] " QUERYOUT '
SELECT @BCPCMD2
= '-c -t , -T -S '
+ @SQLServer +
SET @BCPCMD
= @BCPCMD1+ @filepath
+ @BCPCMD2
Print @BCPCMD
-- Print out below
'BCP "SELECT
* FROM   [tempdb].[dbo].[wErrorLog] " QUERYOUT "D:\Temp\LDH_SQLErrorlog_20130313.log" -c -t , -T -S servername'
EXEC
master..xp_cmdshell
@BCPCMD
''BCP' is not recognized as an internal or external command,
operable program or batch file.
NULL
if i copy the print ourt put like below and excecute the CMD it was working fine, could you please suggest me what is the problem in above query.
EXEC
master..xp_cmdshell
'BCP "SELECT * FROM
[tempdb].[dbo].[wErrorLog] " QUERYOUT "D:\Temp\LDH_SQLErrorlog_20130313.log" -c -t , -T -S servername '
Thanks, SAAD.

How to get data with the raw pattern from resultset ?

would you tell me how to get data with the raw pattern from resultset ?
thank you in advance!
longgger2000

I tried getBytes() and getObject()
, but I can not get the right result , for example the
data in oracle database is 01000000DFFF, when In used
the method of getBytes() and getObject(), I get the
result of [B@1c2e8a4, very different , please tell me
why !
thank you
longgger2000
[B is byte arrayseem that it return an bytes array for you.

How to add date with month after convert number to month?

How to add date with month after convert number to month?
Month Date Result
24 21/11/09 24*(21/11/09)
I want to add both the column and result should be 21/11/11
Thanks
Nihar

Hmm,
Because, you are using YYYY for '09'.
SQL> ed
Wrote file afiedt.buf
1* select to_char(to_date('10/01/09','DD/MM/RRRR'),'DD/MM/YYYY') from dual
SQL> /
TO_CHAR(TO
10/01/2009
SQL> ed
Wrote file afiedt.buf
1* select to_char(to_date('10/01/09','DD/MM/YYYY'),'DD/MM/YYYY') from dual
SQL> /
TO_CHAR(TO
10/01/0009Or with Add_months
SQL> ed
Wrote file afiedt.buf
1* select to_char(add_months(to_date('10/01/09','DD/MM/YYYY'),36),'DD/MM/YYYY') from dual
SQL> /
TO_CHAR(AD
10/01/0012
SQL> ed
Wrote file afiedt.buf
1* select to_char(add_months(to_date('10/01/09','DD/MM/RRRR'),36),'DD/MM/YYYY') from dual
SQL> /
TO_CHAR(AD
10/01/2012-Arun

How can access data in rman output file "daily.log"

Hi All,
i did use following query for rman out
output file "daily.log" has been created,but does not exist data.
how can access data in output file "daily.log"
bash-3.00$ sh rmant.sh
Recovery Manager: Release 10.2.0.3.0 - Production on Thu Jun 30 16:54:16 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: DEV (DBID=45558086)
RMAN> Spool log to daily.log;
2> run
3> {
4> backup databas;
5>}
6> spool log off;
7>
Spooling started in log file: daily.log
Recovery Manager10.2.0.3.0
Starting backup at 30-JUN-11
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=634 devtype=DISK
channel ORA_DISK_1: starting compressed incremental level 0 datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
input datafile fno=00014 name=/u02/proddata/a_int01.dbf
input datafile fno=00022 name=/u02/proddata/a_txn_data01.dbf
input datafile fno=00023 name=/u02/proddata/a_txn_data02.dbf
input datafile fno=00024 name=/u02/proddata/a_txn_data03.dbf
input datafile fno=00039 name=/u02/proddata/a_txn_data04.dbf
input datafile fno=00038 name=/u02/proddata/undo02.dbf
input datafile fno=00027 name=/u02/proddata/a_txn_ind03.dbf
input datafile fno=00028 name=/u02/proddata/a_txn_ind04.dbf
input datafile fno=00012 name=/u02/proddata/undo01.dbf
input datafile fno=00015 name=/u02/proddata/a_media01.dbf
input datafile fno=00025 name=/u02/proddata/a_txn_ind01.dbf
input datafile fno=00026 name=/u02/proddata/a_txn_ind02.dbf
input datafile fno=00029 name=/u02/proddata/a_txn_ind05.dbf
input datafile fno=00021 name=/u02/proddata/a_summ01.dbf
input datafile fno=00019 name=/u02/proddata/a_ref01.dbf
input datafile fno=00020 name=/u02/proddata/a_ref02.dbf
input datafile fno=00001 name=/u02/proddata/system01.dbf
input datafile fno=00002 name=/u02/proddata/system02.dbf
input datafile fno=00003 name=/u02/proddata/system03.dbf
input datafile fno=00004 name=/u02/proddata/system04.dbf
input datafile fno=00005 name=/u02/proddata/system05.dbf
input datafile fno=00006 name=/u02/proddata/system06.dbf
input datafile fno=00007 name=/u02/proddata/system07.dbf
input datafile fno=00008 name=/u02/proddata/system08.dbf
input datafile fno=00009 name=/u02/proddata/system09.dbf
input datafile fno=00010 name=/u02/proddata/system10.dbf
input datafile fno=00011 name=/u02/proddata/system11.dbf
input datafile fno=00013 name=/u02/proddata/a_archive01.dbf
input datafile fno=00036 name=/u02/proddata/sysaux01.dbf
input datafile fno=00016 name=/u02/proddata/a_nolog01.dbf
input datafile fno=00037 name=/u02/proddata/izu01.dbf
input datafile fno=00017 name=/u02/proddata/a_queue01.dbf
input datafile fno=00018 name=/u02/proddata/a_queue02.dbf
input datafile fno=00031 name=/u02/proddata/odm.dbf
input datafile fno=00034 name=/u02/proddata/portal01.dbf
input datafile fno=00035 name=/u02/proddata/sfx01.dbf
input datafile fno=00030 name=/u02/proddata/ctxd01.dbf
input datafile fno=00032 name=/u02/proddata/olap.dbf
input datafile fno=00033 name=/u02/proddata/owad01.dbf
channel ORA_DISK_1: starting piece 1 at 30-JUN-11
channel ORA_DISK_1: finished piece 1 at 30-JUN-11
piece handle=/sw/weekly_cum_database_DEV_t755196858_c1_s24_p1 tag=WEEKLY_CUM_DAT
ABASE comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:32:55
channel ORA_DISK_1: starting compressed incremental level 0 datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
including current control file in backupset
including current SPFILE in backupset
channel ORA_DISK_1: starting piece 1 at 30-JUN-11
channel ORA_DISK_1: finished piece 1 at 30-JUN-11
piece handle=/sw/weekly_cum_database_DEV_t755198834_c1_s25_p1 tag=WEEKLY_CUM_DAT
ABASE comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:02
Finished backup at 30-JUN-11
Spooling for log turned off
Recovery Manager10.2.0.3.0
Recovery Manager complete.
bash-3.00$

i did try this but it hangs
bash-3.00$ sh rmant.sh
Recovery Manager: Release 10.2.0.3.0 - Production on Fri Jul 1 10:52:01 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: DEV (DBID=45558086)
RMAN> Spool log to 'daily' append;
2> run
3> {
4> backup as backupset
5> incremental level=0 cumulative
6> device type disk
7> tag "weekly_cum_database"
8> format '/sw/weekly_cum_database_%d_t%t_c%c_s%s_p%p'
9> database;
10> }
11>

I am tryin to access old macbookpro harddisk on macbook air,when i connect it via usb i see the folders,but i dont see any files e.g. photos,movies,docs are not there,its shows that 220gb is used,but no data is visible...can u pls adv how to access data?

i am tryin to access old macbookpro harddisk on macbook air,when i connect it via usb i see the folders,but i dont see any files e.g. my saved photos,movies,docs are not there,its shows that 220gb is used,but no data is visible...all folder are empty.......can someone pls adv how to access data?

i am tryin to access old macbookpro harddisk on macbook air,when i connect it via usb i see the folders,but i dont see any files e.g. my saved photos,movies,docs are not there,its shows that 220gb is used,but no data is visible...all folder are empty.......can someone pls adv how to access data?

How to access data in different server with flex3 remoteobject

I am trying to access data from cfc that is in different pc
through network and coldfusion 8, flex3 and sql server are in diff.
pcs. So how can I access the cfc file in different pc using remote
object which will return the data from another server using dsn? I
can connect to the service if coldfusion and flex are kept in same
pc. How can I access it in diff. pc?what will be destination and
source param values?
Any help is appreciated.

Hi,
You should be able to achieve this by changing the end point
URL of the channel you are using in the services-config.xml. The
end point URL should point to the server where your CF is deployed.
Hope this helps.

How to access data of all users in a page?

Hi all, I am new to APEX and have a query.
I have installed APEX on my local machine, created a workspace, and added a few users with roles.
I am creating an application, similar to a Library app, where I have a table that stores Books information (BOOK_ID, BOOK_NAME, etc). I'd like to create another table BOOK_USER with two columns, BOOK_ID and USER_ID. BOOK_ID would refer to the BOOKS table, and I want USER_ID to refer to the table that stores user details of the workspace that I am using. The data entry would happen from a page that has two LOVs, one for book name (using BOOK_ID as the value) and another for user name (USER_ID, or whatever field APEX uses to store user's ID). Can I do that in APEX? I've found ways to access and authenticate a user for a page, but how to get data of all users in the workspace? In other words, how to get all usernames in a LOV?
As I am new to APEX, I'd appreciate if someone can guide me through the steps, or post links to tutorial, etc.

Assuming that you are using the Application Express User Accounts for authentication, in that case you have to use built-in apex views
selet * from APEX_WORKSPACE_APEX_USERSAnd use USER_NAME column instead of user_id
See http://docs.oracle.com/cd/E37097_01/doc/doc.42/e35125/priv_public001.htm#HTMDB25949

How to access values in process request

Hi guys,
Wondering if some one could shed some light on the process of getting values in PR. The situation is that i have linked two pages and both have dateFrom and dateTo fields, the values of the fields are being copied across to the other page automatically. I would like to understand how.
And the other is How is, how to access those values in Process Request. I want to use those dates as criteria for populating data when the user first opens the page.
Any insight would be highly appreciated
Regards,
Shoaib.

The situation is that i have linked two pages and both have dateFrom and dateTo fields, the values of the fields are being copied across to the other page automatically. I would like to understand how.
If you have linked the pages, you would know how the values from one page is being transferred to the other page, this cannot happen automatically, you either must have 1. Passed them through URL
2. Passed them through Session
3. Have the same VO in both the pages and retaining the AM from P1 to P2.
4. Requering the DB in P2 after saving the values in P1
There could be number of ways you have done it.
And the other is How is, how to access those values in Process Request. I want to use those dates as criteria for populating data when the user first opens the page.
Depending on how you passed the values from P1 to P2, the method of getting these values in P2 PFR would vary, but in most cases pageContext.getParameter("paramname") should workThanks
Tapash

How to read data with different XML schemas within the single connection?

I have Oracle 11g database
I access it through jdbc:oracle:thin, version 11.2.0.3, same as xdb.
I have several tables, each has one XMLType column, all schema-based.
There are three different XML schemata registered in the DB
I may need to read the XML data from several tables.
If all the XMLTypes have the same XML schema ,there is no problem,
If the schemata are different, the second read throws BindXMLException.
If I reset the connection between the reads of the XMLType column with different schemata, it works.
The question is: how can I configure the driver, or the connection to be able to read the data with different XML schemata without resetting the connection (which is expensive).
The code to get the XMLType data is textbook implementation:
1 ResultSet resultSet = statement.executeQuery( sql ) ;
2 String result = null ;
3    while(resultSet.next()) {
4 SQLXML sqlxml = resultSet.getSQLXML(1) ;
5 result = sqlxml.getString() ;
6 sqlxml.free();
7 }
8 resultSet.close();
9    return result ;

It turns out, that I needed to serialize the XML on the server and read it as Blob. Like this:
1    final Statement statement = connection.createStatement() ;
2    final String sql = String.format("select xmlserialize(content xml_content_column as blob encoding 'UTF-8') from %s where key='%s'", table, key ) ;
3 ResultSet resultSet = statement.executeQuery( sql ) ;
4 String result = null ;
5    while(resultSet.next()) {
6 Blob blob = resultSet.getBlob( 1 );
7 InputStream inputStream = blob.getBinaryStream();
8 result = new Scanner( inputStream ).useDelimiter( "\\A" ).next();
9 inputStream.close();
10 blob.free();
11 }
12 resultSet.close();
13 statement.close();
14
15 System.out.println( result );
16    return result ;
17
Then it works. Still, can't get it work with XMLType in resultset.On the client unwrapping XML blows up when trying to switch to different XML schema. JDBC/XDB problem?

How to display data with the same text and key in the drop down list?

Hi All,
Would like so to seek for you advice on the above mention topic. How to display the data with the same text and key using function module 'VRM_SET_VALUES'. From my testing by writing a program, this function module will only show the text and key if both have different data. Please find the coding as below. Is the normal behaviour of this function module? How to overcome this problem? Thanks in advance.
REPORT ZTESTING.
TYPE-POOLS: VRM.
DATA: NAME TYPE VRM_ID,
      LIST TYPE VRM_VALUES,
      VALUE LIKE LINE OF LIST,
      c(20) type c.
*      c = 'select any'.
data:begin of itab occurs 0,
      kunnr like kna1-kunnr,
      name1 like kna1-name1,
     end of itab.
data:begin of jtab occurs 0,
      kunnr like kna1-kunnr,
      land1 like kna1-land1,
     end of jtab.
PARAMETERS: p_list(20) AS LISTBOX VISIBLE LENGTH 20
                          default 'SELECT'.
AT SELECTION-SCREEN OUTPUT.
NAME = 'p_list'.
VALUE-KEY = 'Name'.     "---> Data for key is the same with text
VALUE-TEXT = 'Name'.    "--> Data for text is the same with key
APPEND VALUE TO LIST.
VALUE-KEY = '2'.
VALUE-TEXT = 'Country'.
APPEND VALUE TO LIST.
CALL FUNCTION 'VRM_SET_VALUES' EXPORTING ID = NAME VALUES = LIST.
start-of-selection.
select kunnr name1 up to 20 rows from kna1 into table itab.
select kunnr land1 up to 20 rows from kna1 into table jtab.
case p_list.
when '1'.
loop at itab.
write:/ itab-kunnr,itab-name1.
endloop.
when '2'.
loop at jtab.
write:/ jtab-kunnr,jtab-land1.
endloop.
endcase.
<Added code tags>
Moderator Message: Please use the "code" tags to format your code snippet.
Edited by: Suhas Saha on Nov 17, 2011 11:19 AM

shawnTan wrote:
Hi All,
>
> Would like so to seek for you advice on the above mention topic. How to display the data with the same text and key using function module 'VRM_SET_VALUES'. From my testing by writing a program, this function module will only show the text and key if both have different data. Please find the coding as below. Is the normal behaviour of this function module? How to overcome this problem? Thanks in advance.
>
>
REPORT ZTESTING.
>
> TYPE-POOLS: VRM.
>
> DATA: NAME TYPE VRM_ID,
>       LIST TYPE VRM_VALUES,
>       VALUE LIKE LINE OF LIST,
>       c(20) type c.
>
> *      c = 'select any'.
>
> data:begin of itab occurs 0,
>       kunnr like kna1-kunnr,
>       name1 like kna1-name1,
>      end of itab.
>
> data:begin of jtab occurs 0,
>       kunnr like kna1-kunnr,
>       land1 like kna1-land1,
>      end of jtab.
>
> PARAMETERS: p_list(20) AS LISTBOX VISIBLE LENGTH 20
>                           default 'SELECT'.
>
> AT SELECTION-SCREEN OUTPUT.
>
> NAME = 'p_list'.
>
> VALUE-KEY = 'Name'.     "---> Data for key is the same with text
> VALUE-TEXT = 'Name'.    "--> Data for text is the same with key
> APPEND VALUE TO LIST.
>
> VALUE-KEY = '2'.
> VALUE-TEXT = 'Country'.
> APPEND VALUE TO LIST.
>
> CALL FUNCTION 'VRM_SET_VALUES' EXPORTING ID = NAME VALUES = LIST.
>
> start-of-selection.
> select kunnr name1 up to 20 rows from kna1 into table itab.
> select kunnr land1 up to 20 rows from kna1 into table jtab.
>
> case p_list.
> when '1'.
> loop at itab.
> write:/ itab-kunnr,itab-name1.
> endloop.
>
> when '2'.
> loop at jtab.
> write:/ jtab-kunnr,jtab-land1.
> endloop.
> endcase.
>
> <Added code tags>
>
> Moderator Message: Please use the "code" tags to format your code snippet.
>
> Edited by: Suhas Saha on Nov 17, 2011 11:19 AM
This surely seems to be a bug to me(if not by design), did you check for any SAP notes? Perhaps a front end trace can help(Note 407743) !
-Rajesh.

How to Compare date with Current system date in XSLT mapping.

Hello Experts
In a XSLT mapping program, I hava a filed, ZZOB which is giving some date.
which I need to compare with the current date.
Condition-
ZZOB is greater than current date or ZZOBLIG = NULL
Then go further statements.
how can i campare with the current date?
Please help.
Thanks
Balaprasad

This example may help:
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
version="1.0">
<xsl:param name="currentDate"/>
    <xsl:variable name="firstDate" select="concat(substring($currentDate, 1,4),substring($currentDate, 6,2),substring($currentDate, 9,2))"/>
    <xsl:template match="/">
        <xsl:apply-templates select="//item"/>
    </xsl:template>
    <xsl:template match="item">
        <xsl:variable name="secondDate" select="concat(substring(submissionDeadline, 1,4),substring(submissionDeadline, 6,2),substring(submissionDeadline, 9,2))"/>
        <xsl:choose>
        <xsl:when test="$firstDate > $secondDate">
            <xsl:call-template name="late"/>
            </xsl:when>
            <xsl:when test="$firstDate < $secondDate">
                <xsl:call-template name="ontime"/>
            </xsl:when>
            <xsl:when test="$firstDate = $secondDate">
                <xsl:call-template name="same"/>
            </xsl:when>
            <xsl:otherwise>Monkeys<br /></xsl:otherwise>
        </xsl:choose>
    </xsl:template>
    <xsl:template name="ontime">
        This is on time
    </xsl:template>
    <xsl:template name="late">
        This is late
    </xsl:template>
    <xsl:template name="same">
        This is on time
    </xsl:template>
</xsl:stylesheet>

SAPUI5 , how to access data with autocomplete request

Similar Messages

Maybe you are looking for