Sapxpg program core_dump, how can I do? need your help
In my AIX system , I get such an error:
I do not know what can I do ? do you have any advise? thanks
LABEL: CORE_DUMP
IDENTIFIER: A63BEB70
Date/Time: Sun Jul 13 07:01:34 2008
Sequence Number: 3823
Machine Id: 00C0EEEC4C00
Node Id: KS1DSDB1
Class: S
Type: PERM
Resource Name: SYSPROC
Description
SOFTWARE PROGRAM ABNORMALLY TERMINATED
Probable Causes
SOFTWARE PROGRAM
User Causes
USER GENERATED SIGNAL
Recommended Actions
CORRECT THEN RETRY
Failure Causes
SOFTWARE PROGRAM
Recommended Actions
RERUN THE APPLICATION PROGRAM
IF PROBLEM PERSISTS THEN DO THE FOLLOWING
CONTACT APPROPRIATE SERVICE REPRESENTATIVE
Detail Data
SIGNAL NUMBER
11
USER'S PROCESS ID:
438672
FILE SYSTEM SERIAL NUMBER
17
INODE NUMBER
9
PROCESSOR ID
6
CORE FILE NAME
/usr/sap/PRD/DVEBMGS00/work/core
PROGRAM NAME
sapxpg
STACK EXECUTION DISABLED
0
ADDITIONAL INFORMATION
Unable to generate symptom string.
Stack is unusable.
here is the content of file:dev_cp , I do not know whether there are any problems? and my sapxpg generated core_dump in 07:00 AM, I can not find any record at the time 07:00 AM,
Trace file of control program (trace level 3)
< Function: BtcTrcInit> Function: main SAPXPG 640
2008-07-13--15-00-21 : Before BtcXpgDetach
> Function: BtcXpgDetach Can't detach from process group (already leader)
< Function: BtcXpgDetach Accept RFC connection from R/3 system
2008-07-13--15-00-21 : Before RfcAccept
2008-07-13--15-00-21 : RfcAccept returned OK
security check switched OFF
Install RFC call SAPXPG_START_XPG
Install RFC call SAPXPG_START_XPG_LONG
Install RFC call SAPXPG_END_XPG
Wait for RFC call SAPXPG_START_XPG or SAPXPG_START_XPG_LONG
2008-07-13--15-00-21 : Before first call of RFCDispatch
> Function: BtcXpgStartXpg
2008-07-13--15-00-21 : Beginning of BtcXpgStartXpg
> Function: BtcXpgStartXpgImport > Function: BtcXpgParam < Function: BtcXpgParam > Function: BtcXpgParam < Function: BtcXpgParam > Function: BtcXpgParam < Function: BtcXpgParam > Function: BtcXpgParam < Function: BtcXpgParam > Function: BtcXpgParam < Function: BtcXpgParam > Function: BtcXpgParam < Function: BtcXpgParam > Function: BtcXpgParam < Function: BtcXpgParam > Function: BtcXpgTable < Function: BtcXpgTable < Function: BtcXpgStartXpgImport > Function: BtcXpgStartXpgInt > Function: BtcXpgItTransfer Content of source log table:
Line Text
<No StdOut/StdErr output reported>
Target log table is not identical to source
ItGetLine terminated with NULL
< Function: BtcXpgItTransfer > Function: BtcTrcReset Trace level reset to 3
< Function: BtcTrcReset Call mode: VIA RFC
Input arguments of BtcXpgStartXpg:
External program: brarchive
Program argument string: -u / -c force -p initPRD.sap -cds
Contents of control flags:
StdIn control flag: redirect StdIn
StdOut control flag: store StdOut output in memory
StdErr control flag: store StdErr output in memory
Trace control flag: trace level 0
Termination control flag: control program will wait for termination
> Function: BtcXpgCheck > Function: BtcXpgArgv Scanned parameter 1: -u
Scanned parameter 2: /
Scanned parameter 3: -c
Scanned parameter 4: force
Scanned parameter 5: -p
Scanned parameter 6: initPRD.sap
Scanned parameter 7: -cds
Total number of arguments scanned: 7
Argument argv[0]: brarchive
< Function: BtcXpgArgv < Function: BtcXpgCheck > Function: BtcXpgSigInst set signal handler for SIGCHLD to SIG_DFL
old signal handler for SIGCHLD: SIG_IGN
< Function: BtcXpgSigInst > Function: BtcXpgStart > Function: BtcTrcInit Process id: 442864
Parent process id: 233906
< Function: BtcXpgStart Start status of external program: external program successfully started
Id of external process: 0000930102
StdOut/StdErr collected in memory
Line Text
<No StdOut/StdErr output reported>
< Function: BtcXpgStartXpgInt > Function: BtcXpgStartXpgExport > Function: BtcXpgParam < Function: BtcXpgParam > Function: BtcXpgParam < Function: BtcXpgParam > Function: BtcXpgParam < Function: BtcXpgParam < Function: BtcXpgStartXpgExport
2008-07-13--15-00-21 : End of BtcXpgStartXpg
< Function: BtcXpgStartXpg
2008-07-13--15-00-21 : After first call of RFCDispatch
Wait for RFC call SAPXPG_END_XPG
2008-07-13--15-00-21 : Before second call of RFCDispatch
> Function: BtcXpgEndXpg
2008-07-13--15-00-21 : Beginning of BtcXpgEndXpg
> Function: BtcXpgEndXpgImport > Function: BtcXpgTable < Function: BtcXpgTable < Function: BtcXpgEndXpgImport > Function: BtcXpgEndXpgInt > Function: BtcXpgItTransfer Content of source log table:
Line Text
<No StdOut/StdErr output reported>
Target log table is not identical to source
ItGetLine terminated with NULL
< Function: BtcXpgItTransfer > Function: BtcXpgReadChild Read returns 28 bytes
> Function: BtcXpgLog Log message (27 byte): BR0002I BRARCHIVE 6.40 (15)
< Function: BtcXpgLog Read returns 79 bytes
> Function: BtcXpgLog Log message (78 byte): BR0006I Start of offline redo log processing: adyivkpp.cds 2008-07-13 15.00.21
< Function: BtcXpgLog Read returns 113 bytes
> Function: BtcXpgLog Log message (112 byte): BR0477I Oracle pfile /oracle/PRD/920_64/dbs/initPRD.ora created from spfile /oracle/PRD/920_64/dbs/spfilePRD.ora
< Function: BtcXpgLog Read returns 1 bytes
> Function: BtcXpgLog Log message (0 byte):
< Function: BtcXpgLog Read returns 55 bytes
> Function: BtcXpgLog Log message (54 byte): BR0013W No offline redo log files found for processing
< Function: BtcXpgLog Read returns 183 bytes
> Function: BtcXpgLog Log message (0 byte):
< Function: BtcXpgLog > Function: BtcXpgLog Log message (76 byte): BR0007I End of offline redo log processing: adyivkpp.cds 2008-07-13 15.00.27
< Function: BtcXpgLog > Function: BtcXpgLog Log message (49 byte): BR0280I BRARCHIVE time stamp: 2008-07-13 15.00.27
< Function: BtcXpgLog > Function: BtcXpgLog Log message (54 byte): BR0004I BRARCHIVE completed successfully with warnings
< Function: BtcXpgLog Process executing external program has terminated
< Function: BtcXpgReadChild > Function: BtcXpgEnd > Function: BtcXpgLog Log message (44 byte): External program terminated with exit code 1
< Function: BtcXpgLog < Function: BtcXpgEnd Termination status of external program: program terminated with error code 1
StdOut/StdErr collected in memory
Line Text
1 BR0002I BRARCHIVE 6.40 (15)
2 BR0006I Start of offline redo log processing: adyivkpp.cds 2008-07-13 15.00.21
3 BR0477I Oracle pfile /oracle/PRD/920_64/dbs/initPRD.ora created from spfile /oracle/PRD/920_64/dbs/spfilePRD.ora
4
5 BR0013W No offline redo log files found for processing
6
7 BR0007I End of offline redo log processing: adyivkpp.cds 2008-07-13 15.00.27
8 BR0280I BRARCHIVE time stamp: 2008-07-13 15.00.27
9 BR0004I BRARCHIVE completed successfully with warnings
10 External program terminated with exit code 1
< Function: BtcXpgEndXpgInt > Function: BtcXpgEndXpgExport > Function: BtcXpgParam < Function: BtcXpgParam > Function: BtcXpgParam < Function: BtcXpgParam < Function: BtcXpgEndXpgExport
2008-07-13--15-00-27 : End of BtcXpgEndXpg
< Function: BtcXpgEndXpg
2008-07-13--15-00-27 : After second call of RFCDispatch
2008-07-13--15-00-27 : After call of RfcClose (wait)
< Function: main
2008-07-13--15-00-27 : End of SAPXPG: main
Similar Messages
-
I found the solution to a Mavericks bug on the Mail program. How can I share it? Several of my mail boxes stopped functioning properly when I updated to Mavericks. The title of the mails stored in the mailbox appear, but the content was unavailable.
After 4 long hours at the phone with the Apple staff unable to help me, I discovered that if I change the name of the mailbox, the contents of the mails stored there become available.
Please, make this solution available to other people!You have found the the way to share it. Include your problem and its solution in a forum post in the Mavericks forums. Then mark you own post with a green solved star.
Note. You won't get any points for that; points are only awarded where you mark someone else's post as either helpful or solved. -
HI, I need your help. How can I delete all data, when I do not have the special security code, which I didn´t remember ? I also think, that I never create this code before. But I cannot put my settings back.
You must remember the code, if you can't then take the phone and proof of purchase to an Apple Store.
-
A previous and unrelated text always appears when I need to send a new text. This prevens forwarding texts also, which I need to do all the time for my businss. How can I fix? Please help?
Hi,
This sounds like it is about Window positions.
iChat has Default places for Incoming Invites.
Video is always top Center of your Screen
Audio and Text chats are Upper right with the Audio slightly lower than Text Chats.
Secondary invites are sort of Stacked like when you open multiple files from the same App.
Your outgoing Windows are "Remembered" as to where the last one was when you used it.
This can be an issue if you use your Mac with a second display and turn Off Mirroring.
You windows can get "left" on the other screen.
Go to System Preferences > Displays and turn On Mirroring and the windows should come back to one Screen/display.
If this does not help go to your Home Folder/Library/Preferences and delete (Drag to Trash) com.apple.ichat.plist and restart iChat.
Unfortunately you will need to reset any iChat Preferences you have changed from defaults.
10:42 PM Tuesday; April 26, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.7)
, Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
I have CS4 In design but when I try to open a certain file I get the answer that all plug in´s is not in my program. How can I update my plug ins?
<moved from Downloading, Installing, Setting Up to InDesign>
-
I forgot my password for Encrypt my Backup how can I reset that please help I really need it Urgently?
If you do not know the passcode then you cannot use the backup
Sorry -
I Need Your Help With My IPod Touch 4 I Would Like To Have Music To Listen To&I Would Like To Know How To Get Internet For My Apple IPod Touch 4 So I Can Have Music To Listen To.Thank You,Donna Spinner
Connect to your home wi-fi network.
Click Support at the top of this page, then click Manuals.
Select the ipod touch manual. -
How can i format Iphone 4.But i didnt want deleted pictures,programs,musics.How can i do that?
Restoring to factory setting will certainly erase the pics.
Why don't you import the pics to your computer as you should be doing anyway? -
I'm trying to watch a tv show on my iPad but it keeps freezing 15 minutes into the program. How can I fix this?
Moved to Adobe Reader for iOS.
If you are trying to open an xml based pdf file, then it is not supported on the present version of Reader for iOS. -
I need your help, PLEASE. How can to fix "NO MOUNTABLE FILE SYSTEM" error of my back up hard drive on Mountain Lion OS?
Did you format the drive for Mac use before you tried to use it as a backup drive?
Are you using Time Machine on the drive? You can't view the contents of its backup database and the only way to access the info is directly from the Time Machine app. -
Hello my company Favorites I would like to first thank you for this wonderful program I have a question about the program. How can I Arabization program In your response to the spread accept me thanks and respect
Hi ,
You might want to refer the following link to find your serial number and activate your software .
Here is the link for the same.
https://helpx.adobe.com/x-productkb/global/find-serial-number.html
Let us know how it goes .We'll do the best possible to get your issue fixed.
Regards
Sukrit Dhingra -
hello everyone, i need Mongolian keyboard layout, how can i find it, please help me, my pc is version OS X Yosemite, 10.10.2
CLICKY CLICK---> Multilingual Mac
-
Dear all:
Sorry for so long title.
I need your help with how to drag the objects and drop onto the front panel.
Like the LabVIEW front platte, i can choose the objects i can drop onto every where of the front panel.
Could drag and drop function can satify?
Any idea?
Thank you
Attachments:
Image00000.jpg 75 KBWhat you want to do is relatively complicated and it seems that your knowledge of LabVIEW is relatively basic. I suggest you try searching this site and google for LabVIEW tutorials. Here, here, here, here, here and here are a few you can start with and here are some tutorial videos. You can also contact your local NI office and join one of their courses.
In addition, I suggest you read the LabVIEW style guide and the LabVIEW user manual (Help>>Search the LabVIEW Bookshelf).
Try to take over the world! -
My Mac is running slowly and having some gliches when opening programs. How can I clean up the disk to make it more efficient?
learn how to use Recovery Mode
Don't do anything until you can restore and have repaired the disk drive.
Post should get moved to either ML (10.8,.4) or iMac forum
Swap out the hdd for an SSD : )
Don't do anything to clean it up unless you don't know how to first remove browser history from within the programs; low on disk space (I consider more than even the 15% minimum, more like 3--40%)
And do you have page outs? more than enough RAM? what actually leads you to ask? Programs aren't opening properly?
Sometimes it is easier to take the long road: just reinstall and restore.
Recovery Mode
http://support.apple.com/kb/HT4718
TimeMachine 101
https://support.apple.com/kb/HT1427
http://www.apple.com/support/timemachine
Mac OS X & Mountain Lion Community
https://discussions.apple.com/community/mac_os
General purpose Mac troubleshooting guide:
Mac OS X: Starting up in Safe Mode - http://docs.info.apple.com/article.html?artnum=107393
What is Safe Boot, Safe Mode? (Mac OS X) - http://support.apple.com/kb/HT1564
Isolating issues in Mac OS X
Creating a temporary user to isolate user-specific problems:
Isolating an issue by using another user account
Identifying resource hogs and other tips:
Using Activity Monitor to read System Memory and determine how much RAM is being used
Starting the computer in "safe mode":
Mac OS X: What is Safe Boot, Safe Mode?
To identify potential hardware problems:
Apple Hardware Test
General Mac maintenance:
Tips to keep your Mac in top form -
please , i need youre help ! im from Mexico and i dont speak inglish well but ill try explain me... i buy a cs5 students edicion but i lost my paswoord for the instalacion can you helpe me ? how can i recuperade my paswoord
Creative SuitesFind your serial number quickly
Mylenium
Maybe you are looking for
-
Getting 10.4 onto a G3 iMac w/o DVD drive
So I'm having some Tiger taming trouble. I've been quite happy with my G4 iBook since I bought it; Tiger came with it, and I haven't made the Leopard leap, so it's running 10.4.11 with all current updates. I still have my old G3 iMac (Summer 2001 "Ki
-
Applet error with changing variable data after several runs....
Can anyone give some advice on the following: I have a java card program running on a gsm sim: The program makes use of member variables which contain data that is reused and rewritten all the time. The member variables are all declared as (for examp
-
Trigger Windows Store Apps update by script at first login
Hi Is it possible to trigger Windows 8.1 to check for Windows Store Apps updates at first login? My issue is that when I add language packs to my Windows 8.1 images, the default apps (Mail, Calendar, Food and Drinks) are still in English. Not until t
-
Hi, I have the Design & Web Premium trial installed on my macbook pro. Can I license this trial with my creative cloud membership, or do I need to reinstall all the apps?
-
Backup error after kernel patch upgrade
Hi. I have a backup problem after the kernel patch upgrade. I have SAP R3 4.6C on HPUX11.0 with an Oracle 8.17 database. I have upgraded kernel patch from 1655 to 2337. Afterward, I am getting following backup error: BR280I Time stamp 2007-11-06 09.