SAS PE + Virtual Server

Hi all,
Currently i try to switch to SAS PE 9 on a new managed server.
The hoster has installed the connection from Apache to SAS.
Now i want to install several applications/domains with the admin web interface - thougth this is easy just:
1. Deploy an application
2. Create Virtual Server with special domains
3. Bind Virtual Server to an application
But i was not able to do this (Non-Admin).
The log file shows: Apache mod_jk/jk2 attached to virtual-server v_one listening on port: 8009
It seems that the connector of the hoster works, but it will only be attached to one of my virtual server named "v_one".
Or do i have do define an HTTP-Listener on 8009 in SAS additionally.
I get also confuse about the defaults which can be set in every window.
Result should be this:
www.one.com => aplication one
www.two.com => applicaton two
wap.two.com => applicaton two
(The calling of the applications must work without context!)
thanx,
J. Hammoud

It turned out to be an IE issue, needed to enable compatibility view.
Now the issue is I can't seem to login. It has the kerberos authentication enabled but apparently it doesn't use my domain credentials. I have the admin password for the guest OS on the VM and I'm a member of the domain admins group on the server but I still
can't login.
Does virtual server have its own set of credentials? Where are those and where can I change them?
EDIT: NVM changed it from Kerberos to NTLM and that worked.

Similar Messages

SCSI-3 Persistent Reservation (PGR) on virtual server

I have problem with storage virtualization. It looks, that on virtual server (hosted by Hyper-V) there isn't possibility to have a SCSI Persistent Reservation (PGR). Am I right?
Thank you for any help.

I have problem with storage virtualization. It looks, that on virtual server (hosted by Hyper-V) there isn't possibility to have a SCSI Persistent Reservation (PGR). Am I right?
Thank you for any help.
Correct. Use iSCSI, Virtual FC or Shared VHDX (see below).
Guest VM Cluster with Hyper-V
http://technet.microsoft.com/en-us/library/dn440540.aspx
Storage options
The following tables lists the storage types that you can use to provide shared storage for a guest cluster.
Storage Type
Description
Shared virtual hard disk
New in Windows Server 2012 R2, you can configure multiple virtual machines to connect to and use a single virtual hard disk (.vhdx) file. Each virtual machine can access the virtual hard disk just like servers
would connect to the same LUN in a storage area network (SAN). For more information, see Deploy a Guest Cluster Using a Shared Virtual Hard Disk.
Virtual Fibre Channel
Introduced in Windows Server 2012, virtual Fibre Channel enables you to connect virtual machines to LUNs on a Fibre Channel SAN. For more information, see Hyper-V
Virtual Fibre Channel Overview.
iSCSI
The iSCSI initiator inside a virtual machine enables you to connect over the network to an iSCSI target. For more information, see iSCSI
Target Block Storage Overview and the blog post Introduction of iSCSI Target
in Windows Server 2012.
Storage requirements depend on the clustered roles that run on the cluster. Most clustered roles use clustered storage, where the storage is available on any cluster node that runs a clustered
role. Examples of clustered storage include Physical Disk resources and Cluster Shared Volumes (CSV). Some roles do not require storage that is managed by the cluster. For example, you can configure Microsoft SQL Server to use availability groups that replicate
the data between nodes. Other clustered roles may use Server Message Block (SMB) shares or Network File System (NFS) shares as data stores that any cluster node can access.
Hope this helped :)
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

Using adobe CC in Virtual server

Dear all
can I install Adobe CC on Virtual Server?
if yes may I know about that workflow?
regards
Deto

Hi John,
but I read thats allowed http://wwwimages.adobe.com/content/dam/Adobe/en/legal/licenses-terms/pdf/CC_EULA_Gen_WWCom bined-MULTI-20121017_1230.pdf
and i still confused is Server function just for reduce amount machine to installing cc program? but validating subscription still via user machine?
regards
deto

Need to create a virtual server and give its access to another admin

Dear Sir,
I am a new admin and have 5 Blade server "HP ProLiant BL660c Gen8".
I access these servers through HP enclosure.
I have to install Hyper-V on server 1 which consisted of the OS windows server 2012 R2 Datacenter edition.
I created a plan to create 5 Hyper-V VM's on the physical server and I requested the IT department network Admin that I want these 5 VM's to able to connect to each other.
The network Admin created a Trunking configuration on the physical server and after this setup he provided me Hyper-v node IP address and 5 more IP addresses for the 5 Hyper-v VM's.
Now it was left to me to Add the Hyper-v role and create 5 VM's.
While Adding the Hyper-V role, I was asked in the middle of the setup to add the network adapter for
connecting to external network.
I went inside the network connection settings and I see one network adapter "Microsoft Multiplexer"
which had the IP address of the Hyper-V node which was given to be me by Network Admin.
Besides this I found following Network Adapter: (Mgmt,Trunk):(Mgmt A, Trunk A);(Mgmt B, Trunk B) =Total
6 Network Adapter out of which only "Mgmt" was configured with the IP address of the Hyper-v node given by my Network Admin. Remaining all other Network adapters IPV4 configuration
was unchecked except "Mgmt"
So I selected the "Mgmt" connection while Installing the Hyper-v role
SO I chose this Network connection for adding the Hyper-V role.
My question: Did I chose the correct Network Adapter.
After doing this I created a VM-1 and tried to assign the IP address given by the Network Admin. But the network Admin did not provide me the default gateway so I used the deafult gateway according to the IP address and used the last digit as "1"
like a general installation.
Now my question is: 1.How can I use this VM to be used as a Virtual server?
2. I would like to open this VM through my browser by entering the IP address of this VM-1. How can I do this?
Because I access my physical server through the IP address. SO in the similar way I want to access this VM-1 through the IP address
OR is there any alternate way to access this VM-1 separately.
My Requirement: I need to give VM-1 access to another admin to Install his application on it. SO how to give him to access this VM directly?
This is my main query.
Waiting for your reply.
Thanks & Regards,
Ahmed

Jawin, Jacob, etc.. are fine for creating COM clients but COM servers is a totally different story. I suspect you'll either have to write your own JNI or get out your C/C++ compiler.

How to restart a virtual server in WS7

Does anybody know host restart a virtual server without restarting the whole instance?
Thanks.

you can run 'bin/reconfig' - this will make any changes (that does not require a restart) available to the running server (this includes all virtual servers configured within this server instance) without requiring a restart - i mean without any downtime
no, there is no way to make dynamic reconfig work only for a single virtual server. but i guess, what you care most is - ability to modify a setting for a virtual server without disturbing other virtual servers - 'bin/reconfig' is probably what u r looking for.

File system error while creating a virtual server

Hi
I get the following error when I create a virtual server:
File System Error: Could not create directory /opt/SUNWwbsvr/https-web-content (permission denied)
The admin server is owned by root but the instance that I want to create should be owned by webservd - like the other instance that is installed.
this error shows that web server is unable to create a directory under SUNWwbsvr folder. Any hints pls?
thanks!

sorry this error is while creating a new server instance - not a new virtual server.
File System Error: Could not create directory /opt/SUNWwbsvr/https-web-content (permission denied)

Error while creating virtual server in sunone web server 6.1

I created virtual server class called vs1 and virtual server called vsr1 under it. I deleted them . now while i am trying to create another virtual server class by setting lisener socket and giving it a name. when i create virtual server class and click ok and then apply to apply changes it gives me error with message:
File System error: can not open file for reading
c:/iPlanet/Servers/myservername/[email protected]
What's the solution ?
Thanks in Advance,

Hi..
Thanks for your reply...
Executed following command in OVS server..Please find the output of that command..
[root@IRIMSOVM utils]# ./do_rpc.py https://oracle:[email protected]:8899 echo hello
echo ['hello'] =>
success:echo=hello
[root@IRIMSOVM utils]#
Thanks...
YJR

Archlinux on Microsoft Virtual Server - installs but doesn't boot

Hi all,
I'm trying to sneak Arch into our organization, but as we're very Windows-focussed it may take some time. I thought I would be able to install it as a virtual machine on our Virtual Server, but I haven't had any luck.
The system seemed to install fine, but when I restart the machine and take out the virtual CD it just sits there with a blank screen, but using 97% CPU.
Here's how I installed the system:
Physical machine: Core II Duo 2GHz running Windows Vista 32-bit, with 2GB memory and a 120GB IDE drive.
1) Setup a virtual machine - it has 256MB memory, and a 100GB dynamically-expanding IDE virtual hard disk.
2) Attached the Don't Panic 2007.08 BASE ISO to the Virtual Machine, and started her up.
3) Started the installer with arch ide-legacy. This is because I've run through this install a few times now and without this option it complains that it can't read from /dev/null a lot and that it has trouble writing to VHD.
4) Did an auto-prepare and selected all of the defaults to partition the virtual hard disk.
5) Selected all of the base packages and installed them.
6) Did the "configure system", and left everything as the defaults except setting the root password.
7) Installed the kernel, again leaving the defaults in the config file.
8) Installed the bootloader. Last time I used GRUB, but it sat there saying it was installing for over 2 hours. This time I tried LILO and it installed in less than a few seconds.
After all that was done I exited the installer and did a reboot. Now it sits at 97% CPU usage constantly and shows nothing but a blank screen. Using ALT+F1-F5 shows nothing.
Microsoft Virtual Server has support for the Red Hat and other distributions so I would have expected ArchLinux to work. Has anyone else had success in getting Arch to run on Virtual Server? And is there anything I did wrong in my installation?
Cheers,
Paul

Well, according to this virtual pc 2004 supports archlinux 0.7.1 and 0.7.2 .
They claim virtual server 2005 uses the same core as virtual pc 2004 , so it should work.
Try installing with one of the previous isos, see ftp://ftp.archlinux.org/iso .

Need help in creating virtual server

Hi
I have configured the sun ONE portal server to run on a domain p1.test.com. A default virtual server with the listen socket is existing for this virtual server. But now I need to access the portal with another domain name p1.test.co.in. I have tried creating another virtual server but it is not working. Please help me in creating the virtual server. For the "urlhost", whether I have to specify the original machine name or new domain name. Please help me in this issue.
Regards
ram

Hi,
Thanks for your reply. Actually I need the same content for both the url's. The DNS entries are already for the two urls's. It is getting the login page. But after giving the credentials it dosent brings the portal desktop page (seems to be going in a loop).
I have my Sun ONE LDAP server configured with the domain "test.com". Is there any changes that I have to make in the LDAP. Please help me in this issue.
Thank You.
Best Regards
ram

Weblogic Admin Server not starting after Virtual Server move

Hi, we've migrated a VMware virtual server, and our Weblogic Admin (and managed IRM server) no longer start. The associated log files don't get updated and only the following info is present in the Command window, which I can only see if I use the /k switch, otherwise the windows shut immediately.
WLS Start Mode=Development
CLASSPATH=C:\Oracle\MIDDLE~3\WLSERV~1.3\server\ext\jdbc\oracle\11g\ojdbc6dms.jar
;C:\Oracle\MIDDLE~3\patch_wls1033\profiles\default\sys_manifest_classpath\weblog
ic_patch.jar;C:\Oracle\MIDDLE~3\patch_oepe1033\profiles\default\sys_manifest_cla
sspath\weblogic_patch.jar;C:\Oracle\MIDDLE~3\patch_ocp353\profiles\default\sys_m
anifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~3\JDK160~1\lib\tools.jar;C
:\Oracle\MIDDLE~3\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~3\WLSER
V~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~3\modules\features\weblogic.serve
r.modules_10.3.3.0.jar;C:\Oracle\MIDDLE~3\WLSERV~1.3\server\lib\webservices.jar;
C:\Oracle\MIDDLE~3\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Oracle\MIDDLE~3\modules
\NETSFA~1.0_1/lib/ant-contrib.jar;C:\Oracle\MIDDLE~3\ORACLE~1\soa\modules\common
s-cli-1.1.jar;C:\Oracle\MIDDLE~3\ORACLE~1\soa\modules\oracle.soa.mgmt_11.1.1\soa
-infra-mgmt.jar;C:\Oracle\MIDDLE~3\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:
\Oracle\MIDDLE~3\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\Oracle\MIDDLE~3\
WLSERV~1.3\server\lib\xqrl.jar
PATH=C:\Oracle\MIDDLE~3\patch_wls1033\profiles\default\native;C:\Oracle\MIDDLE~3
\patch_oepe1033\profiles\default\native;C:\Oracle\MIDDLE~3\patch_ocp353\profiles
\default\native;C:\Oracle\MIDDLE~3\WLSERV~1.3\server\native\win\32;C:\Oracle\MID
DLE~3\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~3\modules\ORGAPA~1.1\bin;C:\Oracle\
MIDDLE~3\JDK160~1\jre\bin;C:\Oracle\MIDDLE~3\JDK160~1\bin;C:\oraclexe\app\oracle
\product\10.2.0\server\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wb
em;C:\Program Files\Java\jdk1.6.0_20\bin;C:\Program Files\Apache Software Founda
tion\Apache2.2\modules;C:\Oracle\MIDDLE~3\WLSERV~1.3\server\native\win\32\oci920
_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_18"
Java(TM) SE Runtime Environment (build 1.6.0_18-b07)
Java HotSpot(TM) Client VM (build 16.0-b13, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~3\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThre
shold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=AdminServer -
Djava.security.policy=C:\Oracle\MIDDLE~3\WLSERV~1.3\server\lib\weblogic.policy
-Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~3\WLSERV~1.3 -Dwls.home=C:\O
racle\MIDDLE~3\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~3\WLSERV~1.3\s
erver -Ddomain.home=C:\Oracle\MIDDLE~3\USER_P~1\domains\IRM_DO~1 -Dcommon.compo
nents.home=C:\Oracle\MIDDLE~3\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons
.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Djrockit.optfile=C:\Or
acle\MIDDLE~3\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.do
main.config.dir=C:\Oracle\MIDDLE~3\USER_P~1\domains\IRM_DO~1\config\FMWCON~1 -Do
racle.server.config.dir=C:\Oracle\MIDDLE~3\USER_P~1\domains\IRM_DO~1\config\FMWC
ON~1\servers\AdminServer -Doracle.security.jps.config=C:\Oracle\MIDDLE~3\USER_P~
1\domains\IRM_DO~1\config\fmwconfig\jps-config.xml -Djava.protocol.handler.pkgs=
oracle.mds.net.protocol -Digf.arisidbeans.carmlloc=C:\Oracle\MIDDLE~3\USER_P~1\
domains\IRM_DO~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Oracle\MIDDLE~
3\USER_P~1\domains\IRM_DO~1\config\FMWCON~1\arisidprovider -Dweblogic.alternateT
ypesDirectory=C:\Oracle\MIDDLE~3\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracl
e\MIDDLE~3\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Dweblogic.jdbc.remoteEna
bled=false -Dirm.oracle.home=C:\Oracle\MiddlewareNew\Oracle_ECM1 -Dem.oracle.ho
me=C:\Oracle\MiddlewareNew\oracle_common -Djava.awt.headless=true -Dweblogic.man
agement.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToC
onsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~3\patch_wls1033\profiles\default\sy
sext_manifest_classpath;C:\Oracle\MIDDLE~3\patch_oepe1033\profiles\default\sysex
t_manifest_classpath;C:\Oracle\MIDDLE~3\patch_ocp353\profiles\default\sysext_man
ifest_classpath weblogic.Server
Is there another log file I could look at to get more info? None of the domain log files are updated.
Thanks

Thanks for the reply, this looks fine (I think)..the below is the output
Microsoft Windows [Version 6.0.6001]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\Users\Administrator.SEALEDINFO-PROD>cd C:\Oracle\MiddlewareNew\user_projects\
domains\irm_domain\bin
C:\Oracle\MiddlewareNew\user_projects\domains\irm_domain\bin>setdomainenv.cmd
C:\Oracle\MiddlewareNew\user_projects\domains\irm_domain>java -version
java version "1.6.0_18"
Java(TM) SE Runtime Environment (build 1.6.0_18-b07)
Java HotSpot(TM) Client VM (build 16.0-b13, mixed mode)
C:\Oracle\MiddlewareNew\user_projects\domains\irm_domain>java weblogic.version
WebLogic Server 10.3.3.0 Fri Apr 9 00:05:28 PDT 2010 1321401
Use 'weblogic.version -verbose' to get subsystem information
Use 'weblogic.utils.Versions' to get version information for all modules
C:\Oracle\MiddlewareNew\user_projects\domains\irm_domain>

How do I set up a virtual server with a time capsule?

I am trying to set up a wireless camera in my house to be viewed from away from the house.
I cannot seem to figure out port forwarding/virtual serving on the settings of my time capsule. I had no issues doing it with my old router. Does time capsule have that abilty?
I have Macs and PCs,

I figured it out.

How do you configure AMS to stream flash files from my dedicated virtual server?

I would like to stream files from my dedicated virtual server instead of my computer. Is it possible to configure AMS so that I can do this? Any help would be appreciated. Thanks!

See screenshots:
Nancy O.

Blue screen error after converting physical to virtual server using disk2vhd

I have used the sysinternals disk2vhd to create the c: drive from a Dell server. I was able to create a virtual server and boot but had licensing issues. After a support call and doing a repair install to change licensing I am now getting a: "a process or
thread crucial to system operation has unexpectedly exited or been terminated" after the virtual machine boots and I log on. I tried to get the integration services installed but the server wouldn't stay running long enough.
Any suggestions for resolution would be appreciated.

Hi,
Have you tried the suggestion? I want to see if the information provided was helpful. Your feedback is very useful
for the further research. Please feel free to let me know if you have addition questions.
Best regards,
Vincent Hu

Getting Virtual Server ID within OS running on guest VM

Hi,
If I login to OVM Manager and look at the info that is shown for a Virtual Server (under the info tab), there is a ID field.
I want to get this ID from within the OS running on one of the guest VMs. Could you let me know how can this be done? Which command can I use?
Regards,
Vinay

I have never installed the EM agent on Dom0. I always taken the approah of install in the EM agent on the guest and then attaching the VM Manager to EM. Thus, you get the performance stats of the guest themselves and the performance stats of the VM Servers themselves. I know it works. I'm doing it now. I do have collect issues from time to time and its more prevalent on some hardware than it is others.

Migrate SharePoint's SQL Server (physical) to another SQL Server (virtual server)

Infrastructure team is migrating domain\SQLSERVER db to new ‘XYZ’ Location. Also they are moving these DBs to virtual server. Currently these are physical DB servers.
I am trying to keep the server names as same ‘SQLSERVER ‘, but IP address may change. Does it have any impact on MOSS environment and what configuration changes need to be done, if needed???
Note: - i am using alias for my share point 2010 server .
SERVER INFO
2 WEB SERVER , 1 APPS SERVER
NINTEX Workflow Database without Sql "Alias"
No any Customization only 2 site colleciton with Nintex workflow.

You can move all content databases to another SQL server, but moving Configuration DB will have impact on the farm. You can make it work using SQL Alias created on SP server using cliconfg.exe utility but some of the services will break on your farm. As
far as I know It is not recommended to move config db from one sql server to another.
You can check below link for referrence on moving databases from one sql to another sql:
http://technet.microsoft.com/en-us/library/cc512725(v=office.12).aspx
http://blogs.msdn.com/b/shaden/archive/2007/07/05/moving-the-sharepoint-databases-to-a-new-sql-server-instance.aspx
Please ensure that you mark a question as Answered once you receive a satisfactory response.

SAS PE + Virtual Server

Similar Messages

Maybe you are looking for