Sat 2410: How change settings from M/S to CSEL on SD-R6472

Hi guys, think I've made a bit of a hash of upgrading my CD writer to a DVD writer. My notbook is a 2410-601 and wanted to upgrade to a DVD writer. I now know that the old CD writer is set to M/S but the new DVD writer is CSEL. Needless to say, it dosen't work. Is there any way that this problem can be solved or have I simply purchased the wrong drive?
Any help would be much appreciated.
John.

Hello all, just a bit more info for you if your thinking of upgrading your CD writer in your notebook....
Try to buy a new drive that is the same setting as your old one (CSEL or M/S) I think the only way tou can tell is by actually looking at the original drive. Your notebook will probably only recognise one or the other and not both.
If you end up with one that is different (like I did) you will have to change the firmware of the drive.
You can get hold of a cable that will connect your new notebook drive to a pc and flash it yourself (the correct tool for the drive will be out there somewhere)
or (as in my case) get the supplier to do it for you.
I had no idea that these settings couldn't easily be changed so check before you buy!

Similar Messages

  • How change my "from" name in emails?

    Just had Infinity BB installed. Very impressed with speed although engineer had to run an Ethernet cable from ground to first floor which has dropped performance. Am now “playing about “ with emails using BT Yahoo. When composing an email I note my “From” line always appears as J BLOGGS (Note Caps.) followed by my btinternet email address. I would like to change this to something less formal, such as my Christian name followed by the name of my business. So it would now read...
    … Joe. Causeway Art Studios. (followed by my btinternet address).
    Any ideas? I'm a newbie as you gather.
    Solved!
    Go to Solution.

    pinballwitch wrote:
    Thanks gg, yes I've done that,and the name is there fine,  but I don't want the actual email address I'm sending from to appear as well.... I want a different reply address (for a small voluntary organisation), and even though I've typed that into the relevant box, it's still showing the actual one I'm sending from.
    This worked before with my previous provider, but stopped when I switched from them to BT.  I can still use the old account but not make changes like that any more.  So I set up a new sub account for these emails, but is that maybe a problem, that it's a sub account and not my main one?  Am I asking the impossible here?
    Hi.
    As you've set all the relevant boxes including the reply-to box, and you had similar settings with the previous ISP (who were they by the way ?), then I can't see anything to change this directly.
    With your previous provider, what email address was showing against your name when you sent emails ? Did you actually have the organisation email address set in the "From" address in Outlook ? If so, you can stil do this - but you need to associate this address with your BTinternet email address. It's called address verification. See my shortcuts, link below, option 0e. It looks complicated to a certain extent, but once done you can then change the "From" address in Outlook and not need to set the "Reply-to" box.
    http://www.andyweb.co.uk/shortcuts
    http://www.andyweb.co.uk/pictures

  • How change database from mode MTS (Shared) to mode Dedicated?

    How change database (Oracle 8.1.7) from mode MTS (Shared) to mode Dedicated?

    Did you try it ? Look at this :
    TEST =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
        (CONNECT_DATA =
          (SERVICE_NAME = test)
          (SERVER=SHARED)
    SQL> show parameter mts
    NAME                                 TYPE    VALUE
    mts_circuits                         integer 170
    mts_dispatchers                      string  (protocol=tcp)(dispatchers=2)(
                                                 connections=500)
    mts_listener_address                 string
    mts_max_dispatchers                  integer 5
    mts_max_servers                      integer 20
    mts_multiple_listeners               boolean FALSE
    mts_servers                          integer 2
    mts_service                          string  test
    mts_sessions                         integer 165
    SQL> conn scott/tiger@test
    Connected.
    SQL> conn / as sysdba
    Connected.
    SQL> alter system set mts_dispatchers='(protocol=tcp)(dispatchers=0)(connections=0)'
    SQL> /
    System altered.
    SQL> alter system set mts_servers=0;
    System altered.
    SQL> conn scott/tiger@test
    ERROR:
    ORA-12520: TNS:listener could not find available handler for requested type of
    server
    Warning: You are no longer connected to ORACLE.
    SQL>                                                                                                                  However, as I said in my previous posting, you should modify initSID.ora too. If not, next time you'll restart your DB, it will run in shared mode again.

  • Cannot change settings from AAC to MP3 encoder although able to do so on another computer

    I am frustrated as I am able to change my settings on ITunes 10 on my desktop computer, but when I downloaded ITunes10 on my notebook, I was not able to change the same settings from AAC to MP3 encoder although I clicked ok. It keeps reverting to AAC, and I am not able to rightclick my music file, as I can do on my desktop, to create a smaller mp3....
    I also noticed that other checkmarks, i.e. checking "podcast" under general preferences under source revert back to unchecked when I get out.
    What to do?
    Thanks so much,
    Anita

    andreafromspringfield gardens wrote:
    And what does "in the Enterprise" mean?
    In a school / business / corporate environment. Used for a large deployement of iPads.
    http://www.apple.com/support/ipad/enterprise/

  • Change settings from windows service pack2

    ''duplicate - locking - https://support.mozilla.com/en-US/questions/889659''
    i changed settings to run with windows service pack 2
    now want to change back to windows 7 how?

    Restore your iPod in iTunes for Mac. Just be aware that restoring will erase and reformat the iPod's hard drive, reload the software with the Mac version and put it back to default settings, so if you have songs on your iPod that aren't on iTunes you will lose them if you have no back up. Once the restore is complete follow the on screen instructions to name the iPod and automatically sync your songs and videos onto the fresh installation. Press Done and the iPod will appear in iTunes and start to sync. If you want to update manually or using selected playlists uncheck the box beside the sync automatically instruction and press Done, it will default to manual mode and you can choose whatever setting you like: Restoring iPod to factory settings with iTunes 7

  • How to change settings from CMYK to RGB in illustrator and photoshop

    Everything is in CMYK and I need to change it to RGB for my M2 dtg garment printer, because my colors on shirts are not coming out right.  My rip software for printer is in RGB.  When I open new file in illustrator and click advanced to change to RGB I get a little warning saying;  The chosen color mode is different from the color space defined by the Document Profile.  Panel content may not match the new color mode.

    First choose "Basic RGB" for Profile in the New Document Dialog, then adjust any advanced settings.

  • HT204411 How can i change settings from mexican store to philippine store?

    I was trying to update the games that i had downloaded but then i'm getting pop up message that i can't update due to i'm using mexican store and i need to switch to philippine store. How am i gonna do this?

    Open your itunes store. On the main page scroll right down to the bottom. Under Manage you will will a change countries. Try that.

  • I need to change settings from pop to imap

    I need to sync my email act. to be compatible with my iphone and ipad they are imap and my current thunderbird settings is pop. can this be changed and how do I do it

    ''moving to the Thunderbird questions queue''

  • Changing settings from automatic to manual sync

    I've just started using my ipod nano and originally set it up to sync automatically with itunes. However, I've now downloaded a lot of things that are used for slide shows, etc. that I don't necessarily want loaded onto the ipod. How can I now change the setting to manual? I read the directions but was stumped from the very beginning when I was told to go to the "source list" and choose ipod nano. Did not know what the source list was and could find the words "ipod nano" no where. Any suggestions?

    The source list is the long pane on the left hand side of iTunes where you see the icons for Music, Movies, playlists etc. When you connect your iPod it should appear in this pane under a heading named "Devices". Devices only appears when you have your iPod connected. When it shows, click on the iPod icon to bring up the preference tabs in the main section on the right. In the iPod Summary tab (which is the first tab) to "Manually manage music and videos" and click Apply. In this mode you just drag and drop whatever you want to the iPod from either library:
    Managing content manually on iPod
    iPod 101: Fill 'er Up
    Note: When changing from automatic to manual, check the "manually manage music and videos" box in Summary then press the Apply button. "Don't" uncheck Sync Music in the Music tab, it will be unchecked by default when you choose the manual setting, if you uncheck it without setting the iPod to manual first you'll erase all the songs from your iPod
    Something else to be aware of when using an iPod in manual mode is that the "Do Not Disconnect" message will remain on the display until you physically eject the device. In that case use Safely Remove Hardware icon in the Windows system tray on your desktop or check this link: Safely Disconnect IPod

  • Skype changing settings from mobile account

    Hi. I have a problem with Skype. A really bad one. When I make a change in my settings through Windows, my phone Skype lags behind and resets my desktop version to the old settings. Within minutes, Skype does this...- changes status to online when i want to be invisible- re-adds contacts to my list after deleting and blocking them- reverting my status to the previous one it's really quite embarrassing for me to have to keep changing. My contacts can see me switching back and forth between online and invisible. My contacts see my status flickering on and off like a dead lightbulb. They can see me block them and suddenly add them again. I know that this is because I have a version of Skype on my phone. However, when I go to turn off skype, it does not appear in my phone's 'Running Apps' task manager. It isn't running, why is it changing my settings? do I really have to delete the app to prevent this? :/

    Dear Stanislav Kim 
    For changing Recon Account :
    1.The GL account should be intially blocked for posting.
    2 . The program RFSEPA02 FOR SWITCHING ON AND RFSEPA03 FOR SWITCHING OFF open items . This program can be modified with the help of ABAP consultant.
    This will convert Recon acct to normal GL account with open items.
    I am sure this will resolve your problem.
    Deven.

  • Change settings from PAL back to NTSC

    I burned a disk in PAL and now can't convince the computer to save the NTSC settings I have re-entered.

    Is this an iMovie question? An iDVD question? If so, then perhaps your question would be better addressed in one of those forums. Be sure to include the relavant info like which version of iMovie or iDVD you use, which OS, Quicktime version is often important, etc.
    Patrick

  • No internt need 2 change settings from contract web 2 pay as u go

    hi there iv just bought the blackberry curve 5200 and its seconed hand i think the phone was on contract before as iv put me contract sim in and all internet works aok but the problem is i need 2 get it working on pay as u goon o2 network iv done the diagnostic test in netwark settings and it says radio activation no signal level unknown network unknown ip address unknown icmp ping echo no blackberry registration no connected to blackberry no blackberry pin no i just cant work out what 2 do can u help me please thanks jason

    Wow, long sentance there jason pretty hard to keep up with the thought process with no puncuation at all anywhere throughout there is no model device 5200 is the device unlocked who is it branded to do you have the blackberry data plan and if you do has it been provisioned to your account with o2 these are things you need to answer oh yea was the device fomerally used on a bes corporate network with an it policy on the device
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Maps - Change Settings from shortest distance to shortest time

    It appears that the MAPS always give a route in the shortest distance. Is it possible to get the route in shortest time?

    Mark: thanks....! Not what I wanted to hear but at least I know to use my Garmin or Sync maps instead.

  • I am trying to print a PDF file to a legal size paper and I would like for it to fill up the page. How do I do this? I went into the settings and changed it from letter to legal, but it's still printing out the same size. Can someone help me, please?

    I am trying to print a PDF file to a legal size paper and I would like for it to fill up the page. How do I do this? I went into the settings and changed it from letter to legal, but it's still printing out the same size. Can someone help me, please?

    Are you trying to Print to PDF or are you trying to Print a PDF file to a physical printer?

  • How do i change my itunes settings from Australian to NZ ?

    How do i change my itunes settings from Australian to NZ ?

    If you are getting an 'account not in this country' message then try going to the bottom of the Featured tab in the App Store app on your iPhone and tap on your account id, tap on 'View Apple ID' on the popup and log into your account, and then select the Country/Region section and select New Zealand.
    If you have moved to New Zealand and want to update your details then you might be able to update your billing address by tapping on your id in Settings > iTunes & App Store on your phone and logging into it, or you can do it via the Store > View Account menu option on your computer's iTunes. If you have a credit card on your account then it will need to have been issued by a New Zealand bank and be registered to your address there.

Maybe you are looking for