Sat 3000-601: Needs BIOS for Linux using

hi
I`m searching for a newer or older BIOS for my notebook.
With the 2.30 TRAD Version, I don`t get the nvidia card to work properly with linux, and with the original BIOS it did.
Perhaps there is a diffent solution for this problem, but I like to test it with an old version.
So can anybody tell me where to download it!?
Thanks, Florian

hi Richard
the problem is that, that when the x-server starts the display goes totally black (including the backlight of the display) and that the notebook freezes when I exit the server in any kind (console switching, or when I shutdown) and with certain GLX funktions, used by 3D applications ( I haven't investigated which exactly, because I can't, becouse of a lack of knowledge and becouse the notebook is dead at this point.
So I first tried some tipps from the Nvidia installatoin guide like not using a rivafb-fram-budder-device, or trying some boot options to disable ACPI or to force that the IRQ's are not allocated by the BIOS (which didn't work at all, there where still 5 devices, which shared IRQ 10 and at last I tried so force the Nvidia-module to use its own AGP-device instead the AGPgart-driver in the original kernel.
But nothing helped.
Bye Florian
P.S. I thing ACPI is still buggy within the new BIOS Version

Similar Messages

Need bios for msi motherboard

Hi
I need a bios for motherboard ms-7360 ver:1.0 p35 Neo , the cip is A7360 ims.100
and i need a how to boot this bios ( instruction )
Tnx to all for help
Andrej

Quote from: Henry on 08-August-10, 04:22:06
What parts are in your PC? Read this and provide information asked for. >> Posting Guide <<
Before you attempt to flash the BIOS let us help you find the cause of your problem first.
Correct BIOS for your MB is here, the BIOS for G33 Neo is the same as for your P35 Neo, BIOS 7360v1xx P35/G33 Neo BIOS 1xx <<
>> Use the MSI HQ Forum USB flasher <<
my parts in computer are
motherboard : MSI P35 Neo (MS-7360) (2 PCI, 3 PCI-E x1, 1 PCI-E x16, 4 DDR2 DIMM, Audio, Gigabit LAN
Čipset motherboard : Intel Bearlake P35 Memory Timings 5-5-5-18 (CL-RCD-RP-RAS)
ram ddr :transcend 2 x 1g
pqi 2x1g
DIMM1: Power Quotient 1 GB DDR2-800 DDR2 SDRAM (5-5-5-18 @ 400 MHz) (4-4-4-12 @ 266 MHz) (3-3-3-9 @ 200 MHz)
DIMM2: Power Quotient 1 GB DDR2-800 DDR2 SDRAM (5-5-5-18 @ 400 MHz) (4-4-4-12 @ 266 MHz) (3-3-3-9 @ 200 MHz)
DIMM3: Power Quotient 1 GB DDR2-800 DDR2 SDRAM (5-5-5-18 @ 400 MHz) (4-4-4-12 @ 266 MHz) (3-3-3-9 @ 200 MHz)
DIMM4: Power Quotient 1 GB DDR2-800 DDR2 SDRAM (5-5-5-18 @ 400 MHz) (4-4-4-12 @ 266 MHz) (3-3-3-9 @ 200 MHz)
graphic card : gigabyte geforce 8600gt with cooler zalman vf1000
GPU Codename G84GT (PCI Express 1.0 x16 10DE / 0402, Rev A2)
GPU takt (Geometric Domain) 540 MHz (original: 600 MHz)
GPU takt (Shader Domain) 1188 MHz (original: 1450 MHz)
procesor : DualCore Intel Core 2 Duo E6420, 2133 MHz
Multi CPU:
ID osnovne plošče TEMPLATE ETEMPLATE
CPU #1 Intel® Core™2 CPU 6420 @ 2.13GHz, 2135 MHz
CPU #2 Intel® Core™2 CPU 6420 @ 2.13GHz, 2135 MHz
otside takt 267 MHz
moment takt 2136 MHz
Tip Central Processor
power 1.3 V
lan : Realtek RTL8168/8111 PCI-E Gigabit Ethernet NIC
power suply : hck usp 5580
CPU core 1.34 V
+3.3 V 3.31 V 32A
+5 V 5.05 V 35A
+12 V 11.97 V 30A
+3.3 V Standby 3.33 V
-12V 0.5A
+5Vsb 2.5A
dvd rom : +5Vsb 2.5A
TSSTcorp CD/DVDW SH-S162L
hdd : WDC WD1600JS-22MHB0
os : windows xp sp3

Can't download oracle 9i for linux using a download manager

where do i download 9i for Linux 64bit???
I need it and I can't find it anywhere.
Please, let me know.
Thanks,
M

MarGur wrote:
where do i download 9i for Linux 64bit???
I need it and I can't find it anywhere.
Please, let me know.Oracle E-Delivery Web site
http://edelivery.oracle.com/
Thanks,
Hussein

Help !! Need Bios For MSI GFFX 5900 VTD

I Need Original Bios For GFFX 5900 VTD !!
Send To: [email protected]
or leave post reply.

Seems like we'll have to wait for someone to tw33k the VGA BIOS for MSI's FX5900 series VGA card... Else I'll be stuck with my paperweights VGA cards now...
I want to see better results on my MSIs' FX5950U vs FX5900U vs FX5900 non-U... Till date, the best card I've o/c'ed is the FX5950U at 1.05GHz, FX5900U at 990MHz and FX5900 non-U at 950MHz...
Though it seems that the memory clock has the capability to o/c even more one after another but the 3D clock is still not more than 560MHz for all 3... and 3DMarks no big difference... Maybe due to my system's bottleneck problems also...

HELP! Needing BIOS for MSI RX3870-T2D512E not RX3870-T2D512E-OC

Hi all,
Could someone please post the original BIOS for MSI RX3870-T2D512E (not overclocked)? I am having problems with my RX3870-T2D512E-OC and I need to underclock it to RX3870-T2D512E. The original BIOS is required so that Live Update would work.
Thanks.

Quote from: wildwild on 09-August-09, 09:28:59
Hi all,
Could someone please post the original BIOS for MSI RX3870-T2D512E (not overclocked)? I am having problems with my RX3870-T2D512E-OC and I need to underclock it to RX3870-T2D512E. The original BIOS is required so that Live Update would work.
Thanks.
Umf.. that crossflash can kill your VGA and void your warranty..
Quote
I am having problems with my RX3870-T2D512E-OC and I need to underclock it to RX3870-T2D512E.
Do it with software or RMA the VGA if its proved that's VGA fault.

Getting an error to order a VM for Linux using a Template

Hi All,
I have tried to submit the order a VM for Linux RHEL6.1.
Portal page is not showing the Administrator Password's "Enter and Renter" tabs on the page and the message showing on the the tab space is as follows:
Important: To set the root password on your virtual machine, please refer to the appropriate restrictions for your Linux operating system flavor.
I have created root password on the RHEL OS itself
I submitted the order after that it is showing the error as follows:
Can any one help me on this how isolate this issue..?
Thank in Advance.
-Noor.

Hello,
Unfortunately there is not enough information here. It is possible that some of the configuration steps have not completed successfully. Without seeing adding screenshots or XMLs it might be hard to answer this question.
Could you please open TAC case? They woudl be able to answer it quickly.
Also, is this question about Cloud Solution or Workplace Solution?
Thanks,
Max.

Need bios for R4870X2-T2D2G-OC

Please if anyone could send me bios for R4870X2-T2D2G-OC? MSI live update does not have archived bios for this graphic card. Thanks

contact msi here: http://support.msi.com/ they will sent you

I need bios for HD4890 Cyclone

hello,
do u know where can i download HD4890 Cyclone clocks 850/975 not Cylone SOC

Quote from: maxforces on 16-January-10, 22:03:30
I flashed bios from SOC version and i want to flash back.
Serial:
602-V194-020B0909136771
HELP
Show that info to MSI Tech here: http://support.msi.com/, they will send you the correct BIOS for your VGA.

Restrictions Really needs improvement for Business use

Hi
We have written an app and are replacing our industry standard barcode scanning devices with over 100 iPod Touches worldwide using a third party barcode sled accessory. This is much cheaper (Around $800 vs $1500) and offers a much richer and less confusing user interface to the end-user. However our end-users are often low paid seasonal workers employed by our clients, so when it comes to the restriction settings in iOS we try to lock the devices down as much as possible.
I think more and more people are treating the iPod/iPhone/iPad in commerical environments and so the ability to secure and maintain these devices really needs to be improved. Our situation aside you can use your iPhone as a point of sale with a credit card swipe, if you have a retail chain with several of these devices for use by employees you don't want them to be messing around on them or making choices that you don't want them to purposfully or accidently.
For instance:
iOS6 upgrade seems to download automatically and prompt the user if they want to install. There is no way to turn updates off, and not even a password is required to do it. In my scenario if someone gets the upgrade push and then clicks ok they then can't work for 30 minutes, not good if there is a long line of people waiting to be served.
WiFi/VPN connections can be changed
Passcode lock can be turned on/off/changed
Date/Time / Keyboard / International / Accessibility settings can all be played with
Weather app always available
Stocks app always available
Maps can be used (location can be disabled at least!)
etc..
If I (as a developer) tell our deployment manager to tell our client's manager to tell their scanning manager to tell their temporary workers to not mess around with things like the above....someones not going to listen, and our IT department is just going to have to check each device and clean up.
I know that apple's portable devices are aimed more at consumers, but I personlly think it's about time that we have some more attention to more business scenarios.
I don't want to come accross negative so i'll finish by saying that a lot of the restrictions in place are very useful. Being able to disable the store, iTunes and safari are very big wins, without those we wouldn't have switched to iOS devices.
Anyone else have a similar need for more administrative ability?
Thanks for reading.

One of these might be good for a POS (assuming you need touch screen), but those are terrible for graphic artists to use. All-in-ones are to be put bluntly, over-priced pieces of junk with crappy power supplies and worthless integrated video cards. They will run too hot most likely and need maintenance more often than larger well-ventilated desktop towers. Your graphic artists staff will hate the small low resolution monitors as well as the lack of decent GPU acceleration. The only good thing about them is the small form factor, a sacrifice well worth looking past IMHO.
Graphic artists should be using high-end monitors, IPS panels for accurate colors and high resolution displays of 2560x1600 pixels. I strongly recommend looking at Dell's Ultra Sharp models (particularly the 30"). If you end up getting three Dell Ultra Sharps then you might as well get the whole system from them as well and develop some sort of professional relationship and support system like most businesses.
*The monitor should be the most expensive component by far and it is the most important for work productivity, do not skimp out here, you run a graphic design firm after all!
Look for reasonably priced desktops with 4-8GB RAM, Intel or AMD quad core processors. Stay away from discrete graphics, Photoshop uses GPU acceleration found on higher end video cards and it is useful. Larger hard drives perform better than smaller ones because of areal density, so buy larger hard drives than needed (1-2TB drives with 500GB or larger platters) and run them in RAID1 for redundancy, because I doubt you have a storage area network.

Need TCL for the "Use Global Names" checkbox when creating Location(s)

We have a TCL script that creates OWB locations as part of our automated install and build process. Recently we switched to using GLOBAL NAME = TRUE on our databases (to implement Oracle Streams). In order to create a location and successfully register the location in the GUI, we need to manually check the "Use Global Names" checkbox and then enter the fully qualified name to successfully connect and register. We need to be able to code this into our TCL scripts to get this location creation and registration done programmatically, but we've reviewed the API coding guide and found nothing. So far, our SR on Oracle support hasn't turned up much either.
Just wondering if anyone else out there has had any success with locations with Global Names enabled, using TCL...?
And it's: OWB 10gR2.
Thanks,
Jim

From my installation script which deals with databases with both global names settings:
       if [string match TRUE $dbGlobalNames] {
           OMBCREATE LOCATION '$DATA_LOCATION_NAME' SET PROPERTIES (TYPE, VERSION, DESCRIPTION, BUSINESS_NAME, HOST, PORT, SERVICE, CONNECT_AS_USER, PASSWORD, DATABASE_NAME) VALUES ('ORACLE_DATABASE','$DATA_LOCATION_VERS','ERS Datamart Code User','$DATA_LOCATION_NAME', '$DATA_LOCATION_HOST','$DATA_LOCATION_PORT','$DATA_LOCATION_SRVC', '$DATA_LOCATION_USER','$DATA_LOCATION_PASS','$DATA_LOCATION_SRVC' )
       } else {
           OMBCREATE LOCATION '$DATA_LOCATION_NAME' SET PROPERTIES (TYPE, VERSION, DESCRIPTION, BUSINESS_NAME, HOST, PORT, SERVICE, CONNECT_AS_USER, PASSWORD) VALUES ('ORACLE_DATABASE','$DATA_LOCATION_VERS','ERS Datamart Code User','$DATA_LOCATION_NAME', '$DATA_LOCATION_HOST','$DATA_LOCATION_PORT','$DATA_LOCATION_SRVC', '$DATA_LOCATION_USER','$DATA_LOCATION_PASS')
       }Addding a value to the DATABASE_NAME property lets OWB know that this a case where GLOBAL_NAMES=TRUE as you wouldn't populate that value otherwise. OWB then will check that checkbox for you.
Cheers,
Mike

Need BIOS for MSI GF615M-P33 V1.2

I need the latest BIOS version for model GF615M-P33 V1.2(FOR EUP)
Live BIOS doesn't works at my pc

Quote from: spinalgr1998 on 28-March-15, 17:17:41
mainboard S/N is MS-7597 VER 1.1
That's not the S/N. You can find the S/N on a white sticker on the box or on the back of the board:
Example:
(board)
(box)
Quote from: spinalgr1998 on 28-March-15, 17:17:41
I can't find BIOS ID.
Follow Svet's advice:
Quote from: Svet on 24-March-15, 22:31:04
list full BIOS ID look for it in BIOS Setup [or during bios post screen press "pause" key]

Downgraded windows 8 need bios for windows 7

i have the hp envy h8-1569 pc, came ithe windows 8. i had to downgrade it to windows 7 pro x64. all is working well, but i am wondering do i downgrade the bios to win 7 or leave it alone?

Hi,
As this is a consumer class PC, I don't believe that HP will release any bios update for Windows 7 - if everything is working well, then there's no need anyway.
Best regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Need bios for a MSI Ti 4600-TD8X

I flashed the wrong bios into my Ti4600-TD8X, the mem and core frequencys are messed up now. the chip says Ti4800, NOT the SE ver. the core and mem clock frequencys are suppost to be 300/650
thanks
Bengo
[email protected]

Bengo,
The Ti4600 8X is a GeForce4 Ti4800. That part is correct. Vid Cards are not Mobos, they do not need to have their BIOS's updated in the first place. 99.9% of the time they get it right with the first release.
Just be glad you did not turn it into a new Key Chain. (Just load the nVidia ForceWare Drivers and use the registry hack to set the core and memory clocks manually.)
Take Care,
Richard

Choosing x200t for Linux use

Hi!
I'm planning to get new x200t (tablet) and use it mostly with Linux.
Any suggestions on what components are compatible with Linux?
I guess this new and expensive MultiTouch display won't be supported, so I'm getting SuperBright WXGA.
But what about Intel WiMAX/WiFi Link 5350? Or should I get the 5100/5300?
Is AT&T 3G card supported?
Also - any way to order this (or similar models) with Linux pre-installed (and avoid paying for Windows completely)?
Thanks!
Dmitry
DJ
NJ

Hello,
i'm using openSuSE 11.1 on an X200t. Unfortunately, all the tablet-buttons are not working. Has anyone working buttons in use ? What linux-distro is used and were there tweaks to be applied ?
Kind regards,
pepun
X200t

How can I set a passcode that is only required at certain times of the day. Ie: my child needs access for school use, but don't want her playing iPad in the middle of the night. I cannot identify a way to have the iPad turn off or require a password

I cannot find a way to enable my child's iPad to require a passcode only at certain times of the day.
Yes I have used the clock/timer/ countdown - great to restrict how many minutes of iPad usage they get a day.
But as my child requires the iPad in school for class lessons the usage at school varies maybe 30 mins 1 day and a few hrs on other days
I want the ability to say set the iPad to not work between say 7pm and 7am, ( unless a passcode is entered) so my child isn't playing games on it in the middle of the night...
Apple I cannot see anything in the settings that performs this function
Help

You can Remote Lock his iPad with Find My iPad using a computer at whatever time you like.
http://support.apple.com/kb/PH2700
Note: The iPad may be disabled if he tries the passcode too many times.

Sat 3000-601: Needs BIOS for Linux using

Similar Messages

Maybe you are looking for