Sat 4070cdt: How to enter the BIOS?

Hi i have a satellite 4070cdt, am I able to enter the bios, if so how please

Hello Steve
As far I know it should be possible to enter the BIOS by pressing the ESC and then F1 button.
Bye

Similar Messages

  • How to enter the BIOS settings on my Satellite L50-A-k4W?

    Help me pls!! How to enter the BIOS settings? I do not know, and Google does not help me =((

    At first you have to perform an complete shutdown.
    Here an HowTo:
    http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
    The point is that Win 8 does not shut down the notebook but the unit performs hybrid shutdown to boot faster. So unit needs to be shut down in order to access the BIOS.
    Start notebook again and press F12 to enter boot menu. Thee you can find option for BIOS settings. You can also try with F2 at start up.

  • Dynabook: How to enter the BIOS settings?

    I have a Dynabook V2/470 CRC. How can I enter the BIOS
    settings on this laptop?

    Hello
    This unit is not known to me but I assume that you can enter BIOS setting pressing F2 button or maybe ESC in combination with F1.
    Bye

  • Tecra 8000 doesn't boot from CD - how to enter the BIOS?

    Hello,
    i have a 2nd hand tecra 8000.
    Now it dont boot from CD? i dont know why... but he question is how to enter on BIOS setup, because is not possible with F2 key.
    How to enter on BIOS?
    Thanks too much
    Francisco
    ([email protected])

    Hi
    Please check this Toshiba FAQ document:
    How to access to the BIOS Setup - instructions for most models
    http://support.toshiba-tro.de/kb0/FAQ6401G1000DR01.htm

  • Toshiba P875 S7102 How To Enter The Bios Setup

    I have been tring everything to get to the bios screen of the computer.  I have tried holding Esc, F1, F2, F10, F12, Delete, but that has not worked.  I have found a toshiba manual that said to hold F2 until you see the toshiba logo then release it.  Nothing has worked, it just continues to boot to windows 8.
    I have searched and searched, this forum and the web, but I have not found anything that has worked to get into the BIOS setup screen.
    What is the proper key stroke to get into the bios screen for P875 S7102 laptop?
    Thanks.

    The "secret" is what you do when shutting down before attempting to access the BIOS.  Press the shift key as you click Shutdown. Then on startup, tap F2 to take you to the BIOS screen.
    This applies to Toshiba laptops that came PRE-INSTALLED with Windows 8. It does NOT apply to Windows 7 machines or those that were UPGRADED from Windows 7 to Windows 8.
    C.B.
    Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

  • How to enter the BIOS in Satellite C50-A006

    Hi!
    I wanted to enter BIOS to select boot sequence in Satellite C50-A006 running with Win8, but I was unsuccessful. I tried pressing F2, F8, F12, ESC and DEL but no luck. Also tried googling, also no luck.
    Please help.
    Thank you!

    Hi
    At first you must perform complete shutdown. After doing this you can start machine and enter BIOS settings.
    How to perform complete shutdown you can read on - http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
    Try it please.

  • How to access the BIOS setting for H330 to verify VT setting?

    How to access the BIOS setting for H330 to verify VT setting?

    Hello Rho2019 and welcome to community,
    To enter into BIOS, Press and hold the F1 key then turn on the computer. When you hear multiple beeps, release the F1 key.
    Best Regards,
    Tanuj
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Z87-G43, can't enter the BIOS Setup, system is not running

    Hi everyone,
    I was working with my pc for about 2 months. Since the very first day i had few problems with mobo but now i can't even run the system and enter the bios. First of all, i had problem with running the system after disabled the MSI logo. I had to enebled it again, because it was the only way to turn on PC (bios stopped at the screen with black screen and a2 code) but it was about 1 month ago. I also remember that from the very beginning option "Hardware Monitor" wasn't working, i mean bios was freezing too and i had to restart PC. Furthermore i have noticed that after choosing language to Polish, few more options in "Settings" appeared, but after switching language back to english they were gone. Unfortunately i can't say now, which one it was because now i got the biggest problem...
    BIOS is not running at all. I mean, it all stops with A2 code in right bottom corner of the screen. I can't even enter the bios setup. It shows "Setup is preparing to start" or something like that, but it doesn't run... Can't do nothing atm. BIOS version was the latest - 1.6 . It all started to happening when i had entered to option in bios with disabling or enabling MSI logo, i didn't choose nothing, it freezed, i have resterted PC, and now i nothing is running...  Btw sometimes, i coudn't run the system and bios was freezeing also, if my TL-WN722N wasn't connected to USB port in front case's panel. But now, whenever Tp-LINK is connected or not, it's not running...
    CPU: i5 4440
    GPU: R9 270x
    SSD: Plextor 2,5' 128GB, SATA III ( 520/200MB/s ), 9,5mm (PX-128M5S)   
    Power Supply: XFX Pro Series 550W PSU 120mm 80+ (P1-550S-XXB9)   
    RAM: Kingston HyperX 2x4GB 1600MHz DDR3 Non-ECC CL9 Intel XMP X2 Grey Series (KHX1600C9D3X2K2/8GX)   

    Quote from: badboy2k on 04-January-14, 18:37:20
    A2 is IDE detect <--- that is a HDD/SSD problem or its cable (try a different one)
    if the above doesn't work try to foll0w >>Clear CMOS Guide<< do that to reset the BIOS to defaults with power cord removed from your PSU!
    after performing the above steps make sure you enter BIOS and reset the SATA mode (AHCI/IDE/RAID to what you installed your os at) and boot order to your SSD first!
    Ye that's the reason, I have a new brand 1tb sata 3 where I installed the windows, but the old 320gb sata 2 is causing the same error, so I have to remove the cables from the sata 2 hdd, than the pc boots ok. I shutdown & reatach the old drive & evrething works untill the PC enters stand by again.

  • How to access the BIOS on Satellite A500-1G2

    Hi
    Could you tell me how do you enter the BIOS. I have A500-1G2 laptop. I've upgraded the Bios and i can't get in. Please help me.
    Czarek

    Hi
    You can access the BIOS pressing F2 button immediately after the notebook has been powered up (after power button has been pressed).
    You can press F2 several time to be 100% sure that this worked

  • How to enter the values in JTable in runtime

    how to enter the values in JTable in runtime

    Basically you need a vector of vectors or an array of arrays. Example (off the top of my head):
    With Arrays
    String[] cols = { "colone", "coltwo", "colthree", "colfour", "colfive" };
    String[] numbers = { "one", "two", "three", "four", "five" };
    String[] letters = { "A", "B", "C", "D", "E" };
    String[][] data = { numbers, letters };
    //make sure that the table has a scroll pane wrapped around it otherwise the header is not displayed
    JScrollPane scroll = new JScrollPane(new JTable(data, cols));
    With Vectors
    Vector cols = new Vector();
    cols.addElement("colone");
    cols.addElement("coltwo");
    cols.addElement("colthree");
    cols.addElement("colfour");
    cols.addElement("colfive");
    Vector numbers = new Vector();
    numbers.addElement("one");
    numbers.addElement("two");
    numbers.addElement("three");
    numbers.addElement("four");
    numbers.addElement("five");
    Vector letters = new Vector();
    numbers.addElement("A");
    numbers.addElement("B");
    numbers.addElement("C");
    numbers.addElement("E");
    numbers.addElement("F");
    Vector data = new Vector();
    data.addElement(numbers);
    data.addElement(letters);
    //make sure that the table has a scroll pane wrapped around it otherwise the header is not displayed
    JScrollPane scroll = new JScrollPane(new JTable(data, cols));The array or vector can be easily populated at runtime.
    Regards
    Riz

  • How to enter the database in oracle 11g!!

    Hi all,
    I have installed Oracle 11g , and the SCOTT,SYS,SYSTEM account are locked ( I guess) as i am UNABLE TO ENTER THE DATABASE.
    When I open SQL+ , a cmd prompt will appear requesting username ( for which I tried SYS,SYSTEM,SCOTT) upon pressing enter, it request's password ,HERE IS THE PROBLEM .What every i try to enter in the password field, doesn’t get displayed there ,I thick its not accepting anything at all.
    I tried sys as sysdba as the username ,didn't work either(insufficent privilages)(windows info: OS-XP sp2, account- administrator),as I am new to SQL Kindly ,SUGGEST ME , HOW TO ENTER THE DATABASE.
    Thanks & Regards
    keerthi kumar

    SET
    sqlplus
    / as sysdba
    startup
    exit
    THE RESULT FROM THE cmd PROMPT FOR THE ABOVE LINES....
    Microsoft Windows XP [Version 5.1.2600]
    (C) Copyright 1985-2001 Microsoft Corp.
    C:\Documents and Settings\KEERTHI KUMAR>SET
    ALLUSERSPROFILE=C:\Documents and Settings\All Users
    APPDATA=C:\Documents and Settings\KEERTHI KUMAR\Application Data
    CLIENTNAME=Console
    CommonProgramFiles=C:\Program Files\Common Files
    COMPUTERNAME=KEERTHIKUMAR
    ComSpec=C:\WINDOWS\system32\cmd.exe
    DEFAULT_CA_NR=CA18
    FP_NO_HOST_CHECK=NO
    HOMEDRIVE=C:
    HOMEPATH=\Documents and Settings\KEERTHI KUMAR
    LOGONSERVER=\\KEERTHIKUMAR
    NUMBER_OF_PROCESSORS=1
    OS=Windows_NT
    Path=E:\app\KEERTHIKUMAR\product\11.2.0\dbhome_1\bin;C:\WINDOWS\system32;C:\WIND
    OWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Common Files\Teleca Shared;C:\Prog
    ram Files\Smart Projects\IsoBuster;
    PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
    PROCESSOR_ARCHITECTURE=x86
    PROCESSOR_IDENTIFIER=x86 Family 15 Model 44 Stepping 2, AuthenticAMD
    PROCESSOR_LEVEL=15
    PROCESSOR_REVISION=2c02
    ProgramFiles=C:\Program Files
    PROMPT=$P$G
    P_SCHEMA=D:\Solid Edge V18\etc\UGSchemas
    SESSIONNAME=Console
    SystemDrive=C:
    SystemRoot=C:\WINDOWS
    TEMP=C:\DOCUME~1\KEERTH~1\LOCALS~1\Temp
    TMP=C:\DOCUME~1\KEERTH~1\LOCALS~1\Temp
    USERDOMAIN=KEERTHIKUMAR
    USERNAME=KEERTHI KUMAR
    USERPROFILE=C:\Documents and Settings\KEERTHI KUMAR
    windir=C:\WINDOWS
    C:\Documents and Settings\KEERTHI KUMAR>sqlplus
    SQL*Plus: Release 11.2.0.1.0 Production on Sun Aug 1 07:26:30 2010
    Copyright (c) 1982, 2010, Oracle. All rights reserved.
    Enter user-name: / as sysdba
    ERROR:
    ORA-12560: TNS:protocol adapter error
    Enter user-name: startup
    Enter password:

  • How to enter the currency value Flex mobile

    Hi, friends, I type from Brazil
    how to enter the currency value in textinput
    format BR ( Brazil )?:
    Thank's

    Hello Ashok,
             Using the same BAPI , set the field R_3_USER of the tables parameter TELEFONDATA to 3 to save the mobile number.
    Hope it helps.
    Thanks,
    Sriram S

  • Nokia 1650 - how to enter the person's 2 [two] con...

    i have purchase nokia 1650. I want to know how to enter the phone-numbers or details of person? [like office,home,mobile, email, etc]

    goto particuler contact name->Details->Options->Add Number.
    You can do this only for the contacts which r saved in phone memory. If you have contacts in SIM, you have to move it to phone memory before doing this.

  • Hello. Tell how to enter the program and to start working in it.  I paid, loaded and installed the program Photoshop CC

    help please to start working... with English at me in any way without translator... if somebody can explain in Russian as to start the program, I will be very grateful
    Tell how to enter the program and to start working in it.  I paid, loaded and installed the program Photoshop CC

    Online Chat Now button near the bottom for Activation and Deactivation problems may help
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

  • How to adjust the BIOS to enable the RAID function.

    My MB is 845PE Max2(MS-6704) and the BIOS version I used is AMIBIOS A6704IMS v3.1 022803
    I need to know how to adjust the BIOS to enable the RAID function.
    Also, please tell me how to utilize 845PE max2 with RAID function.
    I've enabled the Integrated peripheral device/IDE RAID in BIOS.
    But the system still failed to detect my HD that I installed on IDE3-4.
    Please tell me which part I missed.
    much appreciated!!.

    Got the same problem here.
    Furthermore, i can't get the raid controller to get working in winXP. (device won't start)
    MSI 845PE MAX2-FIr GB-L/2.0/1394 (MS-6704)
    P4 2,4 ghz 533 fsb
    2x 512Mb kingston PC 2700 , DDR333.
    MSI G4 Ti4200-VTD8X
    WinXp pro + SP1 installed
    The board has 4 ide connections
    Got all kinds off trouble with this board X(
    Did install Windows XP Promise Fasttrak TX controller (PDC20276) , the device will not start.....
    IEEE 1394 Host Controller installed, the device will not start....
    Multimedia-videocontroller , no drivers available....
    Nice going, this really drives me up the wall!
    Don't know what to do anymore, plz help! ;(

Maybe you are looking for