Sat 5100 Bluetooth stack don't work

Whatever setting is tested, the response is "Bluetooth is not ready"
- setting COM ports
- opening new connection
Debice is properly switched on both physically (switch) and in bluetooth manager.
Hardware problem?

Hi,
did you changed the settings of the Bluetooth Stack? Did it worked yet?
If it is a hardware problem is complicated to say here in the forum. Here is a hint when you want to know safely if there is a hardware problem you could safe your data and make a recovery, after the recovery process the notebook is setted to manufaturer settings and the Bluetooth should work!
But before you make the recovery check the settings of the Stak, the settings of the hardware in the devicemanager in the control panel, also the Bluetooth driver should be checked!
Bye chris

Similar Messages

Iphone 4S - Wifi and bluetooth buttons don't work

Wifi and bluetooth buttons don't work in my Iphone 4S. I have tried all the suggested possible solutions, but nothing seems to work. Can anybody help?

This is the only support document there is regarding the problem. If this does not help, you would need to make an appointment at the Genius Bar. http://support.apple.com/kb/TS1559

My Dock is broken. Stacks don't work, either. A little help? :(

Right, here's the problem:
http://www.birchlabs.co.uk/Dock1.png
The transparent black bezel is... messed up to the extent that it's painful to look at. If that were the only problem, I could put up with it, but it gets worse.
http://www.birchlabs.co.uk/Dock2.png
That's a stack. All I get is the broken bezels. No file names, no icons... I've got nothing. It's unusable (grid mode works fine, in case you're wondering).
Also, if you look in that picture, you'll notice that my separator has become invisible. What gives?
Note that I've only had this computer for a few hours. I transferred to it from my G5 iMac which ran Tiger. None of those Dock problems occurred immediately, I think they might've happened after I ran various full-screen programs - Joost, Halo, and the Java app Dofus Arena come to mind.
Also (though I don't think this is a bug), the shadows on the Dock icons look really horrible now, and I really struggle to figure out which apps are open (my screenshot should vouch for that; I'm pretty sure it's a lot less visible than it's meant to be).
I've rebooted and I've repaired permissions. I've installed all updates. I've done hours of Googling and checking the support forum, all to no avail. Could somebody please shed some light on this problem?

Huh. A few minutes ago, whilst I was doing nothing out of the ordinary, the screen went black, the computer stopped responding, and kept replaying the last half-second of sound it'd made on a loop. I force-rebooted, and now all of those problems are fixed. :/
What can I say... my computer is self-healing?

Bluetooth headphones don't work with Macbook pro Retina, but they do with iMac. Why???

I AM NOT AN EXPERT. I AM MAKING ASSUMPTIONS. My issue, tech spec's and assumptions are listed below.
MY ISSUE:
My Rocketfish headphones work perfectly with my iMac but not with my Macbook Pro Retina.
The Macbook Pro does recognize the device but when I try to connect, it gives me the following error message:
"The device does not have the necessary services".
TECH SPEC
iMac has OS X 10.7.5
Macbook Pro Retina has OS X 10.8.2
MY ASSUMPTION
If I upgrade to 10.8.2 I will not be able to use the headphones.
Or
The new Macbook Pro's are only functional with bluetooth headphones that have certain specs.
HEADPHONES LINK - http://www.rocketfishproducts.com/products/mobile-phones-gps/RF-MAB2.html
HELP PLEASE
samgimages

I have the same problem when I try to connect to my Pioneer Bluetooth car stereo. I dont get any sound before the error message occurs.
I notice that the Type field of the connection is "handsfree"
Malcolm

Stacks are not working -- two copies of Finder!

My system regularly gets into a mysterious state where the dock no longer works properly. Although it can launch applications, stacks don't work.
If I click on a folder in the dock, the stack appears but “open in Finder" does nothing. If I click on the trash can, nothing at all happens. Moreover, when I open the “Force Quit" window, it displays two copies of Finder. (But Activity Monitor only displays one.)
Something is definitely wrong. But what?

Try resetting the SMC and while you are at it a PRAM reset too.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and ALL peripherals.
Wait 15 seconds.
Attach the computers power cable.
Wait another 5 seconds and press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Bluetooth Keyboard - Some key don't work

Hi friends,
I have a 2011 (intel based) 27'' iMac with the bluetooth keyboard. I have two non working keys (control and 1).
There's a way to repair it? My iMac doesn't have warranty and I would like to repair it. What can I do??
Note: I remove the key and see everything fine, but still don't work.
Sorry for my bad english.
Kelvyn.-

Hey KDCruz,
Thanks for the question. Let's see if we can isolate the issue further, the following article has some great troubleshooting steps:
One or more keys on the keyboard do not respond
http://support.apple.com/kb/TS1381
Thanks,
Matt M.

Bluetooth not working even after reinstalling Bluetooth Stack and Monitor

I have a Satellite L70-A PSKNAU-06N06W which was U.S. custom ordered with bluetooh installed. It worked fine for 4 months then stopped. OS is Win7. After reading the boards I downloaded:
   Toshiba Bluetooth Stack for Windows, 9.00.03T
   tc00442200e.exe
   Bluetooth Monitor, 4.08
   tc00299500g.exe
It still doesn't work.Bluetooth Settings says "Bluetooth is not ready" and Bluetooth Assistant says "Autosearch has stopped because Bluetooth power is turned off."
In Device Manager under Bluetooth, Bluetooth V4.0 Module(WB335) and Bluetooth RFComm both have the yellow triangle flags.When I Update Driver Software-Browse my computer- Windows tells me the driver is up to date.When I ask the updater to search automatically it says either that or that the software is corrupted and to contact the manufacturer.
I would appreciate any advice to solve this problem, thanks
Solved!
Go to Solution.

In Device Manager, look under Network adapters.
If you cannot identify the Bluetooth there, then check the wireless. Assume it's the same.
-Jerry

Leopard 10.5.6 bluetooth and sync MobileMe don't works

After 10.5.6 bluetooth icone is disappeared and now I can't sent in sleep my MacBook. I try to remove battery and keep for 5 seconds shut down button but don't work again.
Push Sync for MobileMe don't work with my iPhone from iCal and Address Book. Only web application's sync work.
This update is very bad.

Kirocop wrote:
After 10.5.6 bluetooth icone is disappeared and now I can't sent in sleep my MacBook. I try to remove battery and keep for 5 seconds shut down button but don't work again.
Push Sync for MobileMe don't work with my iPhone from iCal and Address Book. Only web application's sync work.
This update is very bad.
Download the 10.5.6 Combo Update and run it. Be patient because it will take a while and reboot twice. This should fix your problem. Good Luck.

Bluetooth Iphone 4 don't work with other device?

Bluetooth Iphone 4 don't work with other device?

Could be a problem with the contacts on your iPhone's connector. Try cleaning the contacts using compressed dry compressed air, blowing on the contacts using your mouth being carefully not to spit, or using a very soft dry brush.

Some info about my experiences with Toshiba Bluetooth stack - works great

Hej,
I just want to post some experiences with the new Toshiba-Stack and Vista.
First I was forced to use the MS-Stack, because of my mobile (Nokia) and its PC-Suite, and the mouse (Logitech v270). Both applications did not work with the Toshiba-Stack. Now with the new Stack and the new PC-Suite, it works quite good under Vista. Furthermore I decided to remove Logitech SetPoint (still no support for the Toshiba-Stack) because my mouse has actually no special buttons and a built-in battery indicator, so there is no real need for SetPoint.
Yesterday I bought a Nokia HS-12W and I am impressed. Works like a charme with the Toshiba Stack and the sound is just amazing... Can even control the mediaplayer through the headset. This one wont work with the MS-Stack at all. Thats why I took a look at the Toshiba Stack again - and was surprised.
Hope could help you a bit with my impressions!
Greets
snipe

cold-chilli
check the website for your Bluetooth hardware brand for an update of your software (Bluetooth stack = drivers and Bluetooth management software).
This means if your USB Bluetooth hardware is labeled with "Toshiba" then the Toshiba Bluetooth website is the suitable one. The software will not expire. If your
Bluetooth hardware has an other brand label then check the according website of this brand and the software will also not expire. It will only expire if hardware brand
does not fit to the software brand.

MSI Z87I Gaming AC - Intel Wireless AC 7260 Bluetooth don't work

Hi msi forum
i updated my bios more then 2weeks ago didn't have any issues now that i swapped my Intel Core i5-4670K out with my new Intel Pentium G3258 to try overclocking, now bluetooth don't work. I am running bios version 1.3 and i also noticed with this processor i can't do reboots from Windows 8.1 Pro or bios screen just refuses to turn on, but cold boots works flawless
i am running the newest driver from Intel BT_17.0.1405.02_e164 and tried the one on the msi website no one of them works.
my system:
Processor: Intel Core i5-4670k @ 4ghz | Intel Pentium G3258
Mobo: MSI Z87I Gaming AC (Bios 1.3)
Memory: Mushkin Redline 1x8gb @ 2400mhz 10-12-12-28
GFX: MSI N780 TF 3GD5/OC
SSD: Intel 520 Series 240gb
HDDs: Gaming: 1xWD Green 500gb | Anime/DATA: 2xWD Green 2TB | WD Red 4TB @ USB 3.0
Optical: Samsung SH-B123L (Blu-Ray)
Screen: Yamakasi Catleap Q270 IPS 2560x1440@120hz
PSU: SeaSonic X-760 80Plus Gold
Case: BitFenix Prodigy
Cooling: Corsair H80i @ 1xNoctua NF-F12 PWM @ Rad (Outtake)
OS: Windows 8.1 Pro x64 (Fully Updated)
if there is any more info u need tell me.

Quote from: Nichrome on 08-July-14, 02:28:10
For reboots you might have to flash to the newest BIOS as this is Haswell refresh and in fact it didn't had to work properly, especially when OC'ed.
i got the newest bios which i can see on http://us.msi.com/product/mb/Z87I_GAMING_AC.html#download is v1.3 so maybe there needs a bios update to deal this problem i have, bcs i can run the chip at stock no problems with anything but when start oc i have this problem and it was annoying >.<
sry for the late reply but been busy these last days...

Iphone 5 don´t work stabil in the bluetooth word

I can sometimes, and sometimes not connect to me Ipad 2 and PC. turn of and on, sometime i works some times i don´t work. I am waiting and Waiting because it is sometimes slow to be connect, other times it connect immediately.
When I finally get a connection it works very fine.
I am very disappointed by having buying one of the perhaps the most expensive phone om market and then have this vere unstable connection.even to appels own product.
Other phones do not have these problems, They find an connect immediately equipment like PC, Ipad and Headset.
I can not use it in my proffessionel work life, I am very disappointed, and I am now forced to change to an other mobilphoned.

You need a 3rd party iPhone file browser such as TouchCopy. See: https://discussions.apple.com/docs/DOC-3141. This covers more than photos, but it should still be useful.
Note, however, that if the photos were taken with a higher resolution camera than the iPhones the images that you copy back to your computer will be lower quality than the originals, as images in the Photo app are optimized for the iPhone's screen.

IOS 7.0.2 - Bluetooth keyb up/down arrow keys don't work on some applications

I have a logitech ultrathin keyboard that I've been using extensively for text editing with my ipad. Since the upgrade to iOS 7 (and I now have 7.0.2), navigation keys up/down don't work on some applications.
Eg: Works on - notes / gmail
Doesn't work on: - messages / writing kit
This severely impacts the usability of the ipad as a writing instrument.
Tips?

It appears to have been a late-breaking change affecting lots of apps with text views, but not Apple's Notes. If it is the same problem, it happens with the standard keyboard also. I found comments on Apple's developer forums whilst debugging my own app.

How to use Satellite P100 with MS Vista and MS Bluetooth stack?

I'm using my Sat P100 for more than one year. I just reinstalled Windows Vista Ultimate from scratch, and because I'm really not so much satisfied with Toshiba's Bluetooth stack, I'm trying to use original Microsoft's Bluetooth stack, which comes with Vistas.
After reinstall, Windows found BT device and installed MS BT stack. Everything worked well, but ufetr downloading and installing tons of updates including SP1, BT device completely disappeared. I found some articles about how to switch from Toshiba to Microsoft BT Stack, but it seems to be a XP sollutions, and mainly it always need to install "Bluetooth Monitor for MS Stack", but I cannout find this download for MS VIsta.
Can anyone help? Thanx!

I've got it!!!
I have fond one sollution: maybe not excellent, but working!
1. Check if you have latest Toshiba Bluetooth stack installed (here: http://aps2.toshiba-tro.de/bluetooth/?page=download)
1.1 If you have older version, uninstall it, reboot, install latest one, reboot.
1.2 If you don't have any version installed, install the latest one.
2. Assuming you installed to default location, copy this folder to any backup location, including complete directory structure: c:\Program Files\Toshiba\Bluetooth Toshiba Stack\
3. Go to Start/Control panel/Programs and Features and uninstall whole Toshiba Bluetooth stack, reboot
4. After rebooting, there is again "Bluetooth devices" applet in Control panels (it was previously disabled by Toshiba's Bluetooth Stack), but you cannot see any HW Bluetooth device
5. Go to backup location (into ..\Bluetooth Toshiba Stack\) and run AS.exe.
6. It will start installing BT devices, BT icon will appear in Tray.
7. Installer will hang on cca 5th box, but never mind, all drivers are already installed.
8. Maybe you can cancel installer, but I feared that it will roll-back installed drivers, so I simply killed this Install process (Ctrl+Alt+Del, Start Task manager, Select BT installer in Apps and Kill it)
9. Whow, it works now event after restarting.
10. Your feedback welcome! ;)
Massimo Filippi

Wireless keyboard function keys don't work even though updated

Hi,
like i read in different threads, many others had this problem too.
The function keys of my bluetooth keyboard (aluminium 2009) don't work even though i did firmware update for mighty mouse AND the keyboard firmware update. I also unset the option 'use function keys with fn......' option in system preferences. I also tried disconnecting and connecting the device. In system profiler the entry says it is (still) firmware version 80.
What can i do?
I'm thankful for any hint.
Best, Jörg

wrote this in another thread, but it is relevant here, too.
Wanting to buy a keyboard and reading this thread (and others), I went to a local Best Buy. They had quite a few of the wireless keyboards out. They had MC184LL(A) models and (B) models.
ALL of the (A) models worked perfectly with the iPad (typing, brightness, volume, ipod functions, etc).
NONE of the (B) models worked other than basic typing.
They had a stack of maybe 50 new wireless keyboards on the shelf. All but two of them were (B) models.
I bought one of the two (A) models. It is working perfectly on my iPad.
Rob

Sat 5100 Bluetooth stack don't work

Similar Messages

Maybe you are looking for