Sat L20-217: Sometimes keyboard doesn't work

Hi
It is about 3 days that I am having a problem with my satellite L20-217 keyboard.
When I right it miss some characters in a sentence.
Like when I want to write Toshiba it suddenly doesnt type the T, so I will have oshiba. It is not with a specific key, it just happens in the middle of typing with any key even space or backspace.
Please help.
Thank you

I don't know about that Konfabulator.
In principle, additional software may cause that, try the FilterKeys accessibility option in Windows for example.
But I have the same problem with a new Satellite M60. It eats keys pressed briefly. So I try typing slowly and firmly.
An external USB keyboard works OK.
This does not occur on an older Toshiba Satellite 3000 with a keyboard that looks similar.
Did your keyboard work well previously?

Similar Messages

  • My keyboard doesn't work from the login screen, but when I login as a guest user it works fine (minus the brightness buttons, playback buttons, etc.).

    I've already switched out the batteries and the keyboard works fine, so I fear it might be some sort of bug? All the methods of restarting or resetting certain settings can only be done from the login screen or from within an account, when the keyboard doesn't work, and the guest options are limited to non existent.

    Try doing a SMC reset, you may need to do this 2-3 times as sometimes the reset doesn't always "take" the first time. To do a SMC reset, shut down the computer, unplug the power cord from the wall and computer, wait 15-20 seconds and restart normally and test. If after 2-3 resets it still does not work test another keyboard. If that keyboard works then this indicates your keyboard has failed and needs to be replaced.

  • Apple Wireless Keyboard doesn't work in Vista Ultmate?

    My Apple Wireless Keyboard doesn't work (not response) on Vista Ultmate but its works properly in Mac OS X 10.5.2...
    Should I install the driver in Mac OS first or update the keyboard firmware?
    Or install a driver for Windows Vista (I can't find any on web...)
    Please kindly help! Thanks a lot.

    this problem is fixed, but if anybody has an idea what happened, I would like to know.

  • I have an iMac and my keyboard doesn't work. How can I fix it. Got it in 2011. Also my mouse is acting up

    I have an iMac and my keyboard doesn't work. How can I fix it. Got it in 2011. Also my mouse is acting up

    What OS X are you running and do you have USB or Wireless input devices...?
    For wireless devices, take a look at > Troubleshooting wireless mouse and keyboard issues
    USB keyboards and mice generally don't have connection issues, but they and there cords do occasionally go bad.

  • Problem with XP Pro sp1 install - keyboard doesn't work - MBP

    After using bootcamp to repartition the HD and rebooting with an xp pro sp1 cd, the blue windows installer loads and runs fine up to where you need to press the enter button to install windows or F3 to exit. At this point, the keyboard doesn't work at all and I have to push the power button. I also can not load osx or the osx boot disc, but the xp disc still loads fine. Currently working on slipstreaming a w/ sp2 to see if this will fix the problem. Prior to bootcamp, I upgraded osx and my firmware. Anyone else encounter this?

    You need to use SP2. There is a reason it's recommended by Apple. If you have a valid XP install disk you can easily slipstream it with SP2, which is perfectly legal and effective, and is a relatively painless process.
    http://www.helpwithwindows.com/WindowsXP/winxp-sp2-bootcd.html
    Nick

  • KEYBOARD DOESN'T WORK IN ALL JAVA APPS

    I think there are a bug with Java,
    but some keys of my French keyboard doesn't work with ALL Java APPS (Solaris Management console...), but work fine with all other apps.
    When I use Xsun, there are no problem, all keys work, but with Xorg, some keys doesn't work. (Only in Java Apps).
    I had got this bug with Sun Solaris 10 and Sun Solaris 11 (6/05 Express)
    This is a very nasty bug, I have got a PS/2 keyboard.
    Willits

    Enable multilib repo in /etc/pacman.conf , pacman -Syy and pacman -S flashplugin
    Last edited by Halcyon22 (2010-09-14 13:34:53)

  • The backlight of keyboard doesn't work in win7, with a well setup bootcamp drivers

    The backlight of keyboard doesn't work in win7, with a well setup bootcamp drivers

    Forum and support for Boot Camp:
    http://www.apple.com/support/bootcamp

  • Italian keyboard doesn't work under the gui

    I have an italian keyboard on a x86 Solaris 10 installation.
    All the patch available using Sun Update applied but the keyboard doesn't work, it still works only as a USA keyboard.
    Forcing it as a Italian layout at startup (pressing esc and using the boot utility) make the keyboard work in the consolle with the correct layout but under the gui, after the dtlogin startup, the key doesn't work correctly. Every key is "shifted" of one position, so inserting "root" result in "eiir"
    Even applyng the 118966-08 patch as suggested doesn't work.
    Obiouvsly I used the gnome panel to set the correct keyboard under gnome but with no result
    Both the two type of italian keyboards don't work, the standard one and the 104 "ibm" italian layout.
    All this keyboards work fine on the same PC with both WindowsXP and Linux Ubuntu.
    Any suggestion to fix this ?

    The solution was to reconfigure the X-Server: In a console-window I called kdmconfig and corrected the keyboard settings: it was a US-Keyboard. Nobody knows ... At installation time I configured a german keyboard.
    A remaining problem is that my mouse and keyboard are connected via USB and they are frozzen after boot. First when I physicaly detach both and reconnect them they start working in an ordinary manner. I saw a forum entry which talked about BIOS-settings.

  • Guixt problem, sometimes it doesn't work

    Hi SDN.
    We use guixt on ESS screens in EP6 sp20.
    As far as I remember the ITS is on pacth22.
    My user experiense that sometimes guixt doesn't work, but just show the original screen. 5 minutes later it works again.
    Ofcource it cannot be reproduced but happens now and then
    Does anyone have a clue of what I should look for?
    Thanks in advance
    Peter

    Hi Peter,
    I would first download the latest version of guixt.dll and guixt.exe from synactive.com.
    Then I would test it again.
    Regards,
    ScriptMan

  • How can I do Safe Boot if keyboard doesn't work

    iMac frozen at restart and keyboard doesn't work.  Appreciate any ideas on how I can reboot.

    Do you have a wired or wireless keyboard?  If you have a wireless one, using a wired one temporarily might help with this.  Otherewise, it sounds like you have a hardware failure, possibly hard drive or logic board.  In any case I would then recommend taking it in for a Diagnosis and service.

  • 10.5.6 USB apple aluminum keyboard doesn't work...help!

    After installing 10.5.6 my apple keyboard doesn't work, but the apple mouse plugged into the keyboard works fine. I installed the combo update and it still doesn't work. Any ideas?

    I also have the same problem with a MacMini running MacOS 10.5.6 Server. The Al Apple Keyboard (wired) does not show up in the USB tree. However, the wireless one (over bluetooth) works fine.
    help!

  • Keyboard doesn't work in few games

    Hi,
    I found that in few games for Mac, like Prison Architect letters on keyboard doesn't work, what it can be?
    Mac OS X 10.7.5

    paldepind wrote:Yop.
    You could probably try running without an xorg.conf (still make sure hal is running).

  • My MacBook Pro keyboard doesn't work to log in, but lets me type if I'm logged in as a guest. What do I do?

    My MacBook Pro keyboard doesn't work to log in, but lets me type if I'm logged in as a guest. What do I do?

    OK, some more info.
    I have re-installed os/x and applied all of the updates.
    I have tried to migrate my existing accounts and the problem consistently manifests as below:
    1. In a new user account, I can log in and use the keyboard then logout
    2. If I log in to the migrated user account, the non-numeric keys on the keyboard do not work. If I then log out, and try to log in to another account on the same machine, the non-numeric keys continue not to work.
    This would seem to suggest that as the profiles being migrated are on a machine with the same version of up to date OS/X, the issue lies with either the Macbook Pro (other people have also had keyboard problems) or with the migration assistant not working properly given that the current profiles work fine on another mac.
    Any more ideas anyone?

  • Can't set up windows on bootcamp, keyboard doesn't work

    okay, i wait through the agony of the windows install non-sense, and it comes up to the part where i have to set up windows (name, accounts, etc.). But when i go to enter all my info, my keyboard doesn't work, or my mouse for that matter. I have a 24" iMac with the wireless keyboard and mouse. I don't know what to do!
    Message was edited by: jayqUon

    Jay:
    Below is excerpt I took from [HERE|http://support.apple.com/kb/HT1461] which mandates using an internal keyboard or a USB keyboard/mouse to install Windows via boot camp.
    Requirements
    To use Boot Camp, you need:
    1. *An Intel-based Macintosh computer with a built-in or USB keyboard and a built-in trackpad or USB mouse.*
    2. Mac OS X 10.5 or later
    3. The latest firmware updates available for your Intel-based Mac.
    4. At least 10 GB of free space on your startup disk (single partition).
    5. A full, single-disc version of Windows Vista, Windows XP Home Edition or Professional with Service Pack 2 or later. Boot Camp does not include Windows. You must provide your own properly licensed installation disc.
    Important: A Windows XP installation disc must include Service Pack 2 (SP2). You cannot install an earlier version of Windows and upgrade to Windows XP, nor install an earlier version of Windows XP and update it to SP2.
    6. Boot Camp Assistant (find it installed in /Applications/Utilities/ on Leopard).
    Axel F.

  • TS1277 HI. I have followed all the appropriate steps above and when I try to enter my 'Password' when asked, my keyboard doesn't work. No key press can be activated at all when trying to enter my password in 'Terminal. And I am in the 'Administrator' user

    HI.
    I am having trouble authorising my Mac Air to my Itunes account. I found a discussion explaining how to go go into 'Terminal', then adding a command. I have followed all those appropriate steps and when I try to enter my 'Password' when asked, my keyboard doesn't work. No key press can be activated at all when trying to enter my password in 'Terminal. And I am in the 'Administrator' user. Can anybody offer any suggestions?? ta

    Does the command that you're trying to enter in Terminal begin with the word 'sudo'?
    If so, your keyboard is working fine. When you type your password after a sudo command, nothing is echoed to the screen for security reasons (not even the * that are normally registered in other user interfaces). However, the program is registering what you type.
    Just type your password and press 'return' and the command will be executed (so long as you type it correctly; if you don't, you'll get an error message).

Maybe you are looking for