Sat M40-281: Fedora Core 4 doesn't recognize the LAN card
Fedora Core 4 recognize all hardware of my Satellite M40-281, except LAN card :-(
What can i do?!
Thanks and ... sorry for my english (i'm italian!)
byeeeee
Hi
Toshiba notebooks dont support any Linux distributions. Toshiba notebooks are delivered and tested only with Microsoft Windows OS.
As far as I know this unit was delivered with Marvell based PC Express I/F LAN (I/F Chip Marvell based PC Express I/F)
Well, you can try to goggle a little bit. Maybe you will find a driver for Linux.
Furthermore the Fedora Core 4 is based on a Red Hat Linux distribution. So I recommend to visit also this website:
http://www.redhat.com/en_us/USA/fedora/
Good luck
Bye
Similar Messages
-
Solaris 9 x86 doesn't recognize my lan card and can't get the drivers
Hi guys! I have a problem with my solaris os.. It doesn't recognize my realtek 8029 lan card and this means that i can't download the drivers from the internet.. Anyway i got the drivers using my other installed OS ( slackware linux 9 ) from the www but there's a problem it seems that i cant mount the harddrive where the driverz are..neither linux->mount solaris hd disk nor solaris->mount linux hd disk do the trick..(+ i don't have a floppy drive ) Any ideaz how to transfer the drivers from the hd disk where the linux is installed to the solaris disk..?
I have the same NIC (RTL 8029 chip), and.. the solution 4 you. :) I made this quick guide for me, so I can add netwotk support to my system, very easily. Happy to see that another person needs that info.
Follow these steps:
1. Download the file from the link below, put it at /, and unzip it.
ftp://sun.drydog.com/pub/solaris/nei-i86pc-solaris5.7.zip
2. Run (from command line) the command:
add_drv /kernel/drv/nei; devlinks
3. Create the file /kernel/drv/nei.conf and write
name="nei" parent="isa" reg=1,0xe800,0x1f interrupts=5;
(this is the hardware address for my card, you should find your's).
4. Create the file /etc/hostname.nei0, whick will contain the line
192.168.0.1
(this is the IP addr. I use for my internal network, change that to any other reserved addr. you like, like 10.0.0.1)
5. If you use IPv6, create /etc/hostname6.nei0 ,too, with the same contents as hostname.nei0
192.168.0.1
6. Edit /etc/hosts and add the line:
192.168.0.1 myname.mydomain
7. Edit /etc/inet/hosts and make the file look like this:
127.0.0.1 localhost
192.168.0.1 myname.mydomain loghost
8. Edit /etc/inet/netmasks and put:
192.168.0.1 255.255.255.0
9. Run from command line mode or from a terminal:
/usr/sbin/drvconfig -i nei
10. Run from command line mode or from a terminal:
touch /reconfigure; /usr/sbin/reboot
11. After rebooting, type "ifconfig nei0 plumb" to make sure the device was recognized.
It should show up in the output from typing "prtconf"
Normally, now you can use your RTL8029 card.
I hope I help a little bit mate. :) -
I can't connect my camera to my Mac tower - final cut doesn't recognize the connection.
I have a Canon AH X1 video camera which uses the older 6 pin firewire - I have a 6 pin to 9 pin adapter, but when I connect the camera and go to Capture and Log, it doesn't recognize the camera is connected. Even when I click NOW, it does nothing. My camera output settings have been set by the manual for this type of connection, HD and downgrade OFF, or something like that (don't have the camera in front of me this moment). Any ideas?
Thank you!Thanks for the quick response! I have a smokin' Mac Tower - 2 x 2.4 GHz Quad-Core, 10GB RAM, Mac OS 10.6.7.
I am running 6 pin firewire using a 9 pin adapter. I have one internal hard drive - 999GB, formatted Mac OS Extended (Journaled) - 914G are free.
Camera Settings - Playback STD - Comp out 1080i/480i
HD Down Conversion - OFF
When I start up Final Cut Pro, it says
External A/V Unable to locate the following external devices:
Apple FireWire NTSC (720 x 480)
Your system configuration may have changed, or your deck/camera may be disconnected or turned off.
Please check your connections and click "Check Again" , or click "Continue" to set external device detection to None.
Then, when I go to Log and Capture, I get:
Unable to initialize video deck. You may still log offline clips or use Capture Now.
Beneath that, "Initializing Device Control..." stays up and frozen.
THEN, if I click OK and Capture NOW, I get a quick flash of a screen that disappears, and nothing happens.
Thanks in advance... -
I downloaded 2 cds onto my ipod nano through itunes. Recently my itunes account changed for some unknown reason and now it doesn't recognize the songs from the cds. The songs are still on my ipod. I am affraid to sync now because the songs may be deleated, and I don't have the cds anymore. How can I transfer the songs from the cds on my ipod back to itunes so that I don't lose them?
What you have on your computer is your iTunes library, not your "account." The "account" you have for iTunes is your Apple ID, which you use when purchasing or downloading from the iTunes Store. If these songs came from music CDs that you imported into iTunes, those songs are not related to your Apple ID.
Recently my itunes account changed for some unknown reason and now it doesn't recognize the songs from the cds
How are they not "recognized"? Are the songs still listed in your iTunes music library, but grayed out? They no longer appear in your iTunes library at all?
If you search your computer (not in iTunes) for the song files, using one of the song names, can you find the song files? -
I just bought an iPod nano 7th Generation. When i connect it to my laptop, it doesn't recognize the ipod. I tried charging it but when I hold the power button, nothing happens. I don't want to have to return it. Please help me!
Hi dnix257,
Welcome to the Support Communities!
What version of the Windows Operating System do you have?
What version of the iTunes software?
The troubleshooting steps below may help you with this:
Apple - Support - iPod nano - iTunes Troubleshooting Assistant
http://www.apple.com/support/ipodnano/assistant/itunes/#section_1
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
Cheers,
- Judy -
is there an EASY way to submit podcasts to the itunes store? i've tried creating podcasts in garageband, then somewhere after wordpress itunes doesn't recognize the feed.
my process has been (i am open to suggestions for other free and EASY services/methods):
garageband : create & edit audio. add 1400x1400 image.
share to itunes.
drag file to desktop.
upload .m4a file to google drive.
create a link post in wordpress using "podcast" tag & create "podcast" category.
click on "entries rss" in wordpress, which takes me to the rss subscribe page (which is basically just my wordpress address with "/feed" at the end.
i copy this url.
go to itunes store > then "submit a podcast"
itunes gives me the error message "we had difficulty downloading episodes from your feed."
when i try to subscribe to my podcast in itunes, it does, but gives me no episodes available.
i went back into wordpress and changed settings/ reading settings to : "full text" from "summary"
still the same error message.
i added a feedburner step after wordpress but got the same errors. i don't think i should have to add feedburner.
wordpress seems to be encapsulating the rss, what am i doing wrong?
this so much easier when you could go directly from garage band to iweb to mobileme; i miss those apple days (also idisk).if anyone has a super EASY process, i would LOVE to know what it is. EASY, meaning no html and also free. there are many free online storage systems available, many of which i currently use. the above process was just me trying to figure it out, if you have an easier method, please share. thank you so much!
-
I am trying to sync an old ipod nano (2nd generation) to my itunes on a windows pc but the itunes doesn't recognize the nano and says that it is synced with another computer. Unfortunately, I don't have the old computer now. How do I sync this nano to itunes ?
See Recover your iTunes library from your iPod or iOS device.
tt2 -
I cannot connect my iPhone 5 32GB IOS 6.02 to iTunes 11.01 on a Mac Book Pro. The screen freezes and doesn't recognize the iPhone at all. Thank you for your help.
Read here.
http://support.apple.com/kb/TS1591 -
Itunes doesn't recognize iphone sim card after installing io5
I sent hours trying to upgrade my Iphone 3gs to io5 and now Itunes doesn't recognize the phone sim card, I only have a message saying 'There is no sim card in the Iphone you are trying to activate'. Iphone is no longer under warranty, so I don't know what to do if doesn't work any more.
Any advice very welcome Thank you!Same problem with my 3GS :
Impossible to activate IOS 5 because itunes say "sorry there is no sim inside"...
I tried everything and the problem is found on many forum. many people can not activate their iPhone after installing the update. -
I am trying to update my iTunes so I can sync my new iphone 5s and it doesn't recognize the phone, apple support said I need to update my iTunes when I try and do that I get an error message that says " the ITunes update server could not be contacted. Please check your internet connection or try back later.
My internet works fine and I have tried back dozens of times with same result.Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
Thanks! -
I don't understand why iPhoto recognize the pictrures in the videocamera and iMovie doesn't recognize the videos and the videocamera.
I see all the pictures taken in iPhoto but I can't see any video in iMovie because I don't see the videocamera in iMovie.
I did the same operation several times in the past and always worked it out, with USB connection, I've tryed to restart the computer, to turn on and off the camera, to change cable, to change MAC: always the same problem!
Please is anybody so kind to help me ? Thank you!hi dlpmaster!
So, when it updates the program is working but then it sort of freezes. Then unfreezes and then again..
hmmm. what antivirus applications are you using?
as an experiment, does the freezing behavior still occur if you disable the antivirus prior to plugging your ipod in?
love, b -
Dvd/cd drive works but won't allow me to install new programs from disk, doesn't recognize the disk,
dvd/cd drive works but won't allow me to install new programs from disk, doesn't recognize the disk, what can I do?
Well I was able to obtain a work around download of Flash and it installed fine but Firefox tells me it needs updating so I go out, thinking I'm "IN" finally to update it and I get that issue of not being able to get the update for it. It's a regular laptop, not a touch screen or one of those new fangled ones for todays world. In fact it's a refurb so it's probably origin date was a year or so ago before all this MS stuff took off fully. So not understanding why I'm feeling like I'm being BLOCKED from getting the updated Flash I need and desire. If I click on the little "X" and tell it to ignore the warning the vid will play just fine but don't want to have to do that every time. Must be a better way.
Again, I'm sorry for posting in the wrong forum, getting this posted in the Flash forum was my desire but the way Adobe has this set up I just couldn't figure it out. I belong to ALLOT of forums and most are pretty straight forward but this one is confusing! -
Windows 7 64bit on bootcamp doesn't recognize the thunderbolt-ethernet adapter
in my new macbook pro retina I've a problem on window 7 64bit (bootcamp 4.0). the OS doesn't recognize the thunderbolt-ethernet adapter..
The thunderbolt ethernet adapter works without issue on my rMBP with Windows 7. Did you download and install the Windows Support software? Did you refer to the Windows help regarding networking? Did you try a different adapter? What happens when you try to use Ethernet networking?
-
Mac mini doesn't recognize the second monitor
I have Mac mini mid 2011 with dual display setup - one HDMI, the Second one thunderbolt to DVI adapter.
Majority of times it doesn't recognize the second monitor connected through thunderbolt. Sometimes it start suddenly after a while, I've read there are some issues with the 10.10.2 Yosemite...
Any suggestions how to sort it out please? Many thanks, this is really a pain in the *** for me, strugling for a half an hour with a monitor...Thanks lllaass I tried it but doesn't work. I tried with different cables, still doesn't work.
The strange thing is that sometimes it suddenly starts and works smoothly... Really strange problem. I will try a new adapter Thunderbolt to HDMI....
What is the worst, when both monitors work smoothly and I put the computer to sleep or i shut it down, when started all over the monitor is not recognized.
Ehhh :-( -
COLOR doesn´t recognize the editing in FCP
I have a really big problem.
I have only one track in the timeline , when I export to Color and make the play. ! Surprise! , the editing is not the same .
I had trying to export the EDL o XML and put me " Media files of one or more clips are missing timecode tracks and may also be missing reel names "
Could be possible that the Color doesn´t recognize the editing by this way ???
If that is true, How can I make to find the timecode ?. I need to make the color with the color , but now is really difficult.
Anyone can help me?
ThanksI hade made a screen and I send you it
g!¿ Secl~Caroara3 Subctip S :00:00:01:13 00:00:03:07 OO:00: 10:00 00:00:00:00 00:00:11:19 IV Go<
: Secl-CamaraJ Subclip 6 ;00:üO:01:19 00:00:01:17 00:00:02:13 00:00:00:00 00:00:06:24 IV Go<
g Secl-Camara3 Subctip 7 ', 00:00:02: 12 00:00:04:18 00:00:OS:24 00:00:00:00 00:00:11:13 IV Coi
j Secl-Camara3 Subclip S 00:0014:13 f/atSet NoiSet 00:00:00:00 00:00:07:06 IV Gw
¿í;; Secl-Cimara3 Succlip 9 dO:00;OS:04 NotSet fioiSet 00:00:00:00 Offi00:O2:14 IV COI
S Secl-Camara3 Sufcclip 10 :00:00:02,00 fíat Sel 00:00:00:24 00:00:06:00 00:00:04:07 IV Ses
'~~f 5ecl-Camara3 Subctip 1! ;00-00:03:04 Not Ai 00:00:01 14 (X3-00:OO:OO OO 00:05 10 ÍV Coi
ü $£Ci-Camara3 Subcfip 12 \ 00:00:00:01 00:OO:OS:12 00:OO:OS:12 00:00:00:00 00:OO:OS:12 IV Bes
3 Secl-Camara3 Subclip 13 00:00:13:16 MotSet Not Se! 00:00:00:00 00:00:06:20 IV Go<
u Seel-Canura3 Subclip 14 :00:OO:0(s:03 NetSet Haeíet 00:00:00:00 00:00:03:01 IV B«S
5? 5ecI~Camara3 Subcfip 15 00:00:04:05 MotSet ftotSet moo.oo.oo 00:00:02:02 ¡V Coi
;::' Sacl-Camara3 SuBclip 16 '00:00.11:14 HotSet Mat Set 00:00:-00:00 00:00:OS:1B IV Coi
: | Sed -Camara3 Subclip 17 i 00:00:02:17 00:00:02:23 00:00:04:06 OO:OO:00:00 00:00.-94:23 IV Goi
¿j Secl-Camara3 Subclip 1S ;OO:00:09.04 Not Sei NatSet OOMM.OO OOM-Oi-14 IV Coi
3 Secl-CarnaraS SuBclip 19 ;QO:00:03:15 00:00:03:21 00:00:OS:1S 00:00^10:00 00:00:09:04 IV Coi
¿' Seci-Camara3 Suíiciip 20 100:00:00:20 Nstsa Not Set 00:06:00:00 60:00:00:09 IV Coi
S Secl-Camara3 Subciip 21 .00:00:05:24 Not Se¡ Not Sel 00:00:00:00 00:00:02:24 IV Bes
B Secl-Camara3 Subcfip 22 ;00:00:04:09 NotSet 00:00:02:04 00:00:90:00 00:00:03:22 IV Bes
B Setl -Cámaras Subclip 23 ;QO.OO:01:16 00:00:00:17 Not Set 00:00:00:00 00:00:01:12 IV Bes
B Sscl -Cámaras Subclip 24 ;00:00:03:01 00:00:01:OS 00:00:02:20 00:00:00:00 00:00:05:22 IV Bes
S SecI-CamaraS Subclip 2S '00:00:10.09 NalSet MotSet 00:00:08:00 00:00:05:04 IV Bes
3 Secl-Caroara3 Subciip 26 :00:00;0?:14 Not Sel Not Set OÜ:00.-00:00 00:00:03:19 IV Gffl
3 Seel-CamaraS Subclip 27 : 00:00:02:2 3 Mal Sel NtttSet 00:00:00:00 Oú:00:01:ll IV Coi
f". Sscl-Camara3 Subtlip 28 ., 00:00:05:00 Not Set Naí Set 00:00:00:00 00:00:02:12 IV Coi
;•:; Secl-Camara3 Subclip 29 ;OQ:00:07:46 Hotíet Not Set 00:08:00:00 00:00:03:20 IV Coi
;:;:;. Secl-Camara3 Subcüp 30 ^00:00:04:03 Mol Sil Not Sel 00:00:00:60 00:00:02:01 IV Ga
5 Secl -Cámara 3 Subclip 31 1 00:00:02:05 OO:00:03:1S 00:00:04:20 00:OOMO:00 OO:00:OS:17 IV G(X
thanks
Maybe you are looking for
-
Atualização da versão 17 da Nota Fiscal Eletronica
Olá a todos. Baseado na nota Note 1538854 - SAPK-10017INSLLNFE: Support Package 17 for SLL-NFE, precisamos aqui na empresa atualizar a Nota Fiscal Eletrônica para a versão 17. Na parte ABAP e XI Content tudo certo e importado com sucesso. Tenho dúvid
-
Laptop unable to 'communicate' with hp 3050a printer wirelessly
laptop unable to 'communicate' with hp 3050a printer wirelessly, could it be the virgin superhub? (been on the phone to Virgin for an hour they said not their problem) i can eprint and print using a usb cable. Printer displays 'connected' message. O
-
How do I rotate a PDF document? It is upside down
How do I rotate a PDF document ? It is upside down
-
I want to see this in a Java applet: 1 2 3 4 5 6 7 8 9 10 but I only see then in my Applet. What do I wrong?? this is the code: package untitled9; import java.awt.*; import java.awt.event.*; import java.applet.*; public class Applet1 extends Applet i
-
How to determine which user has an Access 2013 databse open
How can I tell which user / PC has opened a Backend Access database?