Sat P10-722: How to switch to TV - S-Video
can anyone please answer me this quick question?
i have a satellite p10-722 with an s-video out, if i were to connect a normal s-video cable to this then to my tv would i be able to view my laptop on my t.v?
thank you for any answers
Hi
If you connect the laptop to the TV properly and switch to TV using FN+F5 key combination or even TV-Out button you will be able to see Windows desktop on the TV but please dont expect perfect quality.
Bye
Similar Messages
-
Nokia n8 How to switch audio tracks in video playe...
How to switch audio tracks in video player? and How can I connect an external audio track playback video?
Re: Nokia N8 how to reset to factory settings [ New ]
2013-01-16 23:06
Hiiii i hace the same problem i dont have pasaron to hard reset my Nokia 8 and i have a big problem, i cant maje calles , or go to the Home menú, or use wifi, dial aytihing I been having that message saying that there no memory and u have to delete some data, since then just menu screen it works but nothing else please help
HI everyone! I also have the same problem as per above. Please help! Thank you! -
Sat P10 Digital Audio/Buttons Problem.
My new Toshiba (Sat P10-873) laptop has buttons on the front of it for playing digital audio and CD's. I use the mode button to switch between audio CD and the music CD, the problem being then when I switch to digital audio, it opens up media player and plays the default "David Byrne" track, rather than my playlist. According to the manual it should play the last opoened playlist but this for some reason does not work. Every time i close media player and then press the play button, it loads media player and begins playing David Byrne. Any suggestions on how I could fix this? Do i have to put my playlist in a certain location? or the audio itself? Do I need to set an option some where? Thanks.
Well, I had only had the PC about half an hour at the time i was trying to do this so obviously no updates and no changes made at this time to the system.
I have however solved the problem myself so just incase anybody else needs to know:
The answer really was rather simple, for some reason, media player was saving my playlists under the "My Documents" folder of "Owner" rather than in my "My Documents" folder. I copied the playlist file from there and into my "My Music" folder and voila, everytime I switch to digital mode, it loads my playlist. Hope that made sense. Thanks for the help. -
How to switch off automatic creation of the business partner?
Hello!
Advise please why in erp after creation of the customer automatically form business partner? How to switch off automatic creation of the business partner? It very much disturbs, because business partner are created from crm. Because of automatic creation business partners are duplicated.Hi,
I have made the following customizing settings to activate customer integration with business partner, but the problem is when I create a BP with a role (FI-Customer) the customer is not created automatically.
1. Set BP Role Category for Direction BP to Customer
Roles: FLCU00 - Business Partner FI Customer (FS: BP)
FLCU01 - Business Partner Customer (FS: BP)
2. Defined the Number assignment for Direction BP to customer
4. Customer account group and numbering is also defined.
3. Created a BP with BP Role FLCU00, I can see the Customer - General Data tab, but no customer was automatically generated by the system.
Kindly let me know if any customizing I have missed.
Regards
Ameya -
How can I watch movies in germany with native tone, english? Any one knows how to switch the language when renting a movie?
I wonder the Format Tables macros on my site could be adapted?
http://www.grainge.org/pages/authoring/word/word_macros.htm
If not, I have used Macro Express to format tables in Rh. No reason it could not be used in Word.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge -
How to switch between messages in the BlackBerry Hub
With the release of BlackBerry 10 version 10.1, we’ve added a new gesture to the BlackBerry Hub that allows you to quickly switch between your next and previous messages. It’s simple: while viewing a message drag your finger from the left to the right and in one continuous motion swipe up or down.
For example, in the following screenshot you’ll notice I am viewing ‘Test 08”. To get to the next message, “Test 09”, all I need to do is swipe from left to right (red arrow) followed by swiping up (green arrow) in a single motion. To switch to the previous message, “Test 07”, I complete the same gesture, but swipe down instead (blue arrow).
Tip: Using a BlackBerry Q10 or Q5? On top of using this gesture to switch between messages, you also have the option of pressing the N key to view your next message, or the P key to view a previous message.
If this gesture doesn’t appear to be working on your device, verify you are using BlackBerry 10.1.0.4181 or later by going to Settings > About and reviewing the OS Version field. If the OS Version is lower than 10.1.0.4181, check for updates by going to Settings > Software Updates.
For more details about the availability of BlackBerry 10.1, check out Inside BlackBerry’s post on BlackBerry 10 Software Updates.
VIA | helpblog.blackberry.com
http://helpblog.blackberry.com/2013/10/how-to-switch-between-messages-in-the-blackberry-hub/
Please thank those who help you by clicking the button.
If your issue has been solved, please resolve it by marking "Accept as Solution"I would set up a variable before you get to that node, lets call it $EmpID and assign to it the value of the prompt you want to play lets say 12345 which would be the library promptID. It will then play prompt, get digits, and once you validate if it goes through the expression that flags it as invalid, in that node re-declare the variable, but this time give it the value of the new prompt you want to play, then sent it back to the node which will then play the new prompt and collect the digits.
-
How to switch off screen while playing songs in 5G iPod
Any ideas how to switch off the screen completely (not just reducing the brightness) while playing the songs.
i'm thinking that this could improve the battery life !!!
30GB Video iPod Windows XP ProNo you can not do this; you can only turn off the Backlight.
-
I need help with redeeming a $15 App Store certificate. I tried to redeem earlier in the day and it was credited to my account. I could not figure out how to switch payment from my credit card to the gift card credit. Later on in the day I see the credit is completely gone and now the card is invalid. Nothing was purchased with the gift card so I want to know where the credit went. I also have$5 credited to my Apple ID from a past gift card that I can't access. What can I do. Is there a customer service number???
To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
How to switch off solution checks
Hello. I have a problem. When I link support message to solution in Context tab, the system perform checks of linked solution. And there are a lot of error message in Support message appears, like this:
'Business process not available, check your entry'
'Business process step not available for business process &1'
'Software component not available, check your entry'
How to manage this checks or how to switch of this checks?
Edited by: Dmitry Udot on Feb 10, 2010 9:42 AMI have fixed this problem myself. It ocures due to deactivation of PPF actions releted with questionary.
Edited by: Dmitry Udot on Feb 11, 2010 1:30 PM -
How to switch off internal macbook screen when using external monitor(s)
as far as i observed, adding external displays ( running different screens on them, not mirroring) to a macbook pro increases the gpu workload and with that comes temperature rise in the laptop and increase in ventilator noise - and probably increased hardware aging and risk of component faillure due to high temperature inside the laptop.
simply try connecting two external 27" screens and open some flash video on both of them. then run a temperature monitoring software and watch temps rise, compared to running same flash videos / demanding tasks only on one connected external screen or only on the laptop screen with no external monitor connected.
especially in mavericks, due to its increased background routines, such a set-up appears ever the more taxing, then again who does not love apple`s nice adds showing laptops with two 27” screens connected to it and the workspace vision they invoke....
i have seen temps around 100° to 102° celsius on a 13" macbook pro 2012 edition, which i would expect is territory where the cpu / gpu temp safety switches will trigger system shutdown any time soon ( hardware status before verified as fully in order by apple service and default osx installation)
imagine your anti-virus software starting some realtime content screening while runnign some demanding tasks already and the system shuts down easily (all such situation observed in reality)
(would be interesting to see how a retina display macbook fares with 2 external monitors running demanding tasks, considering the retina display already increased taxing for the gpu - any experience from users of such a setup would be very much appreciated as it will provide critical purchase decision intelligence for all of us envisioning a retina-book and two big screens adoring our desks...)
turning down the macbook`s built-in screen`s backlight may reduce power consumption but i have not seen any evidence that it switches off the gpu-to-screen feed and respective gpu load - it certainly did not prevent gpu, cpu, board, etc temps to rise to borderline levels.
so the key question here is, how to switch off the macbook pro`s built-in screen in order to avoid gpu cycles being wasted on that screen ( and the resulting heat developments) when working with big external screen(s) connected to the laptop ?this thread talks about running several monitors as advertised by apple and running demanding task on them.
with the lid open, the keyboard offers a very efficiant heat escape vector, which is blocked when the lid is closed - this is a basic and commonsense insulation effect. this thread also mentions the use of temperature monitoring software and thus a repeatable test setup. the temps recorded were also mentioned. they rose when the lid was closed, the running task remaining unchanged. as far as i could track down the cpus in discussion will shut down around the 105 degree celsius range. i observed system shut downs when the system approached 103° celsius. not to mention that the fans will run loud well before that.
again this is on hardware checked and ok-ed by apple service.
the question still welcoming an expert answer: is there any way to switch off the built-in macbook monitor while the lid is open ? -
How to switch off scroll and zoom functions of touchpad on Satellite L
Hi.
Can anyone tell me how to switch off the scroll and zoom functions for the Synaptics Touchpad v7.2 .
Can't seem to do it via the Control Panel.
Any suggestions.Hi buddy,
> Can't seem to do it via the Control Panel.
You can only disable the virtual scrolling function if the touchpad driver is installed properly. The driver provides extended functions and allows you to disable/enable special features. If you dont have installed the touchpad driver download it on official Toshiba page:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
Then navigate to control panel as the previous user wrote for disabling the scroll function.
Can you find it now? -
I can't switch off my IPad 2. there is the Backup ICloud note open which I can't cancel and this creating a blok to switch off the IPad, in fact when I try to close with conventional method I can't slide the stop icon.
Some body know how to switch of with a different method?
StefanoPerform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
How to switch off the pop-up message in rspcm
Hi there,
Does anyone know how to switch off the pop-up message in rspcm?
The monitoring user shouldn't get the pop-up below anymore:
Statusänderung des Requests Sollen Folge-Events ausgelöst werden?
The pop-up in english might be
status change of request - trigger subsequent processing? or similar
We would like to outsource the process chain monitoring (rspcm) to our operating.
But operating shouldn't deal with the pop-up above and make decisions especially when delta infopackages are involved.
Thanks for your help in advance.
Regards,
Wolfgang SmetanaElena,
Is the subsequent process defined on success or failure ? if that is not defined - you might come across this message.....
Arun -
How to switch off the error sound in Triversity
Hi
How to switch off the error sound in Triversity, The audio of the computer is already in mute state. The problem is found with DELL pc and not with HPMohammed,
There is, actually, a better way to get rid of that annoying beep every time you get a policy prompt, error, etc.
I have a Dell Vostro 1300 and I have done this in other Dell laptops with sucess. Perform the following:
Go to Control Panel --> System --> (on the HARDWARE tab) Click on DEVICE MANAGER
In DEVICE MANAGER, click on VIEW --> SHOW HIDDEN DEVICES
Now, go to "NON-PLUG AND PLAY DRIVERS" and you will see "BEEP" listed as an active device. Right click on it and select "DISABLE" and then reboot your laptop.
You should be golden right after the reboot.
Hope this helped,
Alfredo Carigga -
How to switch off the Wireless Transmitting of the xDock for the iPod?
Hey,
Can anybody help me how to switch off the wireless streaming of the xDock transmitter for the iPod? I tried to do it by resetting and I already read the FAQ but nothing seemed to work...
Thanks for your help. ;-)
Hi,
Kann mir irgendjemand sagen, wie ich bei meinem xDock Transmitter f?r den iPod das wireless streaming ausschalten kann? Ich habe bereits versucht das Ger?t zu resetten und habe das FAQ gelesen aber nichts hat geholfen...
Vielen Dank im Vorraus f?r eure Hilfe ;-)turn it into standby mode
unplug the power supply from the x-fi dock
press the volume controller and hold it while plugging the power supply
the link control led on the backside will glow shortly and and turn off
thats it
to reactivate it press both the forward and backward wind button for at least 3 seconds
But I think, this is really a shame, that the WLAN network is unusable when using the x-Fi wireless function.
Maybe you are looking for
-
Java Web Start running JasperReports
The following is the exception that is thrown when trying to compile an .xml report template to a JasperReport object, from an app that has been deployed via the Java Web Start: dori.jasper.engine.JRException: Errors were encountered when compiling r
-
operating system os x 10.6.8 safari 5.1.10. am told on checking that 16.0.305 is installed but not in application. have downloaded install app but cannot carry out the installation. can anyone help? am unable to use any application requiring flash pl
-
I would like to know if iTunes has the ability to stream music to my stereo Bluetooth headset. I have a built-in Bluetooth card that is A2DP capable. I can get Windows Media Player 11 to stream to my Motorola BT820 headset. Please tell me how to get
-
We are looking at developing a Windows Service application using the InDesign SDK. With the current version of InDesign CC, we cannot do this because the application must be running in UI mode after a user has logged into Windows. InDesign Server w
-
Error: All selected SDAs and SCAs have already been deployed before.
I am trying to patch from a new NW2004s build to SPS10. I patched the JSPM to patch 10 and then used it to deploy SPS10 to the JAVA stack. It seemed to work okay with no errors, but when I check the versions of the components they show version 6 not