Sat Pro 4200: accelerator 3D needed. How can I get it?
I use Toshiba Satelite Pro 4200. To play some games DirectX 8.0 must be installed. The games can not be installed because there is no "accelerator 3D". What can I do? I must admit I am ignorant in this matter
Hi
You have to install the newest DirectX. As far as I know the newest version is 9.0C
Try to download it form the Microsoft website:
www.microsoft.com/windows/directx/default.aspx
Similar Messages
-
Hello, I have MacBook Pro with Retina display. How can I get retina support to my Adobe Acrobat pro? It is version 10.1.13 and it says it is up to date.
Problem is that my pdf files look terrible although I have MacBook Pro (Retina, 15-inch, Mid 2014). I have Adobe Creative Suite Design Standard version 6.0 (Mac). I have installed every possible update. I think problem is that for some reason my CS doesn´t support retina display? If I view a pdf file in iMessage, it looks fantastic. But if I open the same document in Adode Acrobat Pro, it looks awful. What can I do?
Thank you so much for your help.
Pekka
Pekka Saatsi
arkkitehti SAFA
SAATSI arkkitehdit oy
Bysmedsintie 56
06500 Porvoo
040 5955933
[email protected]<mailto:[email protected]>
www.arks.fi
Anubha Goel <[email protected]<mailto:[email protected]>> kirjoitti 24.3.2015 kello 4.10:
You have been mentioned
by Anubha Goel<https://forums.adobe.com/people/Anubha+Goel?et=notification.mention> in Re: Hello, I have MacBook Pro with Retina display. How can I get retina support to my Adobe Acrobat pro? It is version 10.1.13 and it says it is up to date. in Adobe Community - View Anubha Goel's reference to you<https://forums.adobe.com/message/7335644?et=notification.mention#7335644> -
I can't burn dvd's with iMovie because my new macbook pro don't have idvd how can i get it.
I recently bought a new macbook pro and it didn't come with idvd and every program tells me to send my completed movies to idvd. How can I get the program idvd. if i have to buy ilife 11 will it work and how can i get it.
ivas2nd wrote:
so my new macbook will support ilife 11. Can anyone post a link that will direct me where to order it with the idvd and iweb because the specs says nothing of the two on the apple website. it just says it has imovie garage band and iphoto.
yes it does - http://store.apple.com/us/product/MC623Z/A/iLife-11
iWeb and iDVD
iLife ’11 also includes iWeb and iDVD for creating instant websites and burning your own DVDs.
Note: iDVD and iWeb are included in the iLife '11 single-user and family pack box, but they are not included on new Mac computers.
What's in the Box
DVD containing iPhoto '11, iMovie '11, GarageBand '11, iWeb (v3.0.2), iDVD (v7.1)
Electronic documentation -
I have a Macbook pro version 10.6.8 How can I get airplay?
I have started a new job and it would be nice to have 2 monitors running separate programs not just mirroring. I have a Macbook pro version 10.6.8 and would like to run my laptop and a separate monitor for work. Any suggestions? and can i get airplay since it's not new enough to utitlize it?
About AirPlay and Airplay Mirroring
AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
Several Apple Articles Regarding AirPlay
Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
How to set up and configure AirPort Express for AirPlay and iTunes
About AirPlay Mirroring in OS X Mountain Lion
iTunes 10- About playing music with AirPlay
Troubleshooting AirPlay and AirPlay Mirroring
Using AirPlay
Thanks to the $15 Beamer, AirPlay streaming is still possible on Macs that do not support Airplay and mirroring.
Another solution is the Air Parrot. -
on your information page it shows a firefox button in the left hand upper corner I don't have that button.
Firefox only shows the Firefox menu button if the menu bar is hidden.
See:
*https://support.mozilla.org/kb/Menu+bar+is+missing
*https://support.mozilla.org/kb/how-do-i-get-firefox-button
Which security information are you referring to?
You would normally have the click the icon on the left hand side of the location bar to see security information in case a secure HTTPS connection is used.
*https://support.mozilla.org/kb/Site+Identity+Button
*http://blog.mozilla.org/ux/2012/06/site-identity-ui-updates/ -
I just purchased a 15" Macbook Pro with retina display.
How can I get my webcam to be compatable online with websites such as chatroulette, etc?
I have the latest version of flash, my system is updated, and my camera works on photo booth, skype, etc.
Whenever I try to access sites such as the one above the green light doesn't turn on and nothing happens, what can I do to fix this?Have you tried a PRAM reset?
http://support.apple.com/kb/ht1379
If you look in the audio output port, is there a red light showing. If so, the internal switch is stuck.. Insert the headphones a few times, jiggle a toothpick inside or shot some compressed air to trip the switch. If no success, have the Apple store genius bar technician do it.
Ciao. -
My previous email was [email protected] For some reason Microsoft outlook have blocked it out and forced me to create another email address. There is a lot of information in the previous emails that I need, how can I get back to them. Microsoft have told me that I cannot reestablish the previous email address. I didn't know they could be so dictatorial.
* If you are using the '''Microsoft Windows Live''' program;<br>
Check the account information. On the far left top, under the icon,<br>
press the box with the arrow. and select '''Options,''' then '''Email Accounts.'''<br>
Select the e-mail account with one click. On the far right, press '''Properties.'''<br>
'''General;''' check the information is correct.<br>
'''Server;''' My Mail Server. Mine is;<br>
http://mail.services.live.com/DeltaSync_v2.0.0/sync.aspx<br>
'''Login Name''' and '''Password;''' re-enter the information<br>
<br>
* Using a web browser, go to '''Live.com''' and sign in.<br>
At the top right, look for your name. Just to its left, click the tool icon.<br>
Select '''Options.''' Under '''Preventing junk email,''' right click on '''Filters and reporting''' and select '''Open New.''' Look thru the settings. If there is something you need help on, just ask. Once you are done, close that page.
Under '''Preventing junk email,''' right click on '''Safe and blocked senders.'''
Look thru and check each listing -
I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?
For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well... -
I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?
For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well... -
am in tanzania.
Am in need of a copy of DVDdrive for a macbook pro OS. how can i get a copy, please any one to helpIf you are referring to the original system reinstall discs that shipped with every Mac before Lion came out you'll need to contact Apple with the serial # of your Mac and order a replacement set of them.
Or look on one of the Auction websites or places like iFixit.com for a replacement set.
If your Mac came new with any of the Download Only versions of OS X, Lion, Mt Lion or Mavericks you don't need any discs to reinstall OS X. You use the Online Internet Recovery system or the built in Recovery HD partition inb the internal hard drive.
For the built in Recovery HD hold down the Command + r keys at startup. For the Online system hold down the Command + Option/Alt + r keys and keep them held down until you see a globe on the screen. -
I am the administrator of my MacBook Pro, which I share with my kids. One of them forgot his password, so as the admin I changed it for his account, but when I try to see his account, it says I need to provide the keychain password. How can i get it? I have no idea how to sort this out...
First, make sure caps lock is not on.
You must back up all data before continuing, unless you've already done so. If you need to back up but can't log in, ask for instructions.
If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
Otherwise*, boot into Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
▹ Restart
from the menu bar.
You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
*Note: If you've activated FileVault, this procedure doesn't apply. Follow instead the instructions on this page:
If you forget the password and FileVault is on -
I did not deactivate a photoshop cs6 before there was a new "C" hard drive installed on my computer and a Win7 Pro fresh install too. How can I activate photoshop on the new hardware if I can't deactivate it on the old hardware that is no longer available? Any help will be appreciated.
If it's the same machine (same CPU) there should not be any need to activate. The actiovation is tied to your CPU.
If you run into problems, then:
Unfortunately, only Adobe customer service can assist you with your issue. These are user forums; you are not addressing Adobe here.
Click on the link below, and after that click on "Still need Help? Contact us."
Then on the next page, click Chat
There is also a phone option. 1 (800) 833-6687
http://helpx.adobe.com/contact.html?step=PHXS_downloading-installing-setting-up_licensing- activation -
On my Mac Pro how can I get voiceover to start reading at a specific point in a document, and then continue on to the next paragraph and so on? Thank you. Ed
Welcome to the Apple family!!!!
How can I cause the VO cursor(box) show-up/start?
Press Control-Option and F5. The F5 key is located on the top row of keys 6th key over. This is a toggling "Keyboard Shortcut" for turning VoiceOver on and off.
How can I move the VO cursor to various sentences or paragraphs of an article and have it start reading ... and perhaps even continue reading on to the next paragraph(s) ... even to the end of the article?
How to read a website with VoiceOver
Step 1: Go to the Website
A quick keyboard shortcut is Command-L. This will jump you up to the address bar. Start typing where you want to go. i.e "www.thewebsite.com"
Step 2: Working with Webpage
VoiceOver will automatically start reading the website. You can pause the speech by hitting the 'Control Button'.
If VoiceOver does not being reading the webpage, then you might have to "Interact" with it. If VoiceOver say "HTML Content" then press Control-Option-Space-Down Arrow to interact with the webpage.
Use Control-Option-Right Arrow to move throught the website. This will speak "EVERYTHING" on the page.
Most website that I've found have their articles labeled as 'Heading'. You can jump from heading to heading, by pressing Control-Option-Shift-H.
If you'd like an itemized alphabetical listing of the site, press Control-Option-I
Press Control-Option-Space on the link or article you want to view.
Step 3. Reading from Top to Bottom
Once you found and clicked on the the article/link, use the same 'Heading' command, Control-Option-Shift-H to find the title.
After finding the title, press Control-Option-A will start reading from the title on.
Note: If there are any other items (ads, pictures, etc) it will read those too.
Tip: You might be able to activate a feature called the 'Reader'. The Reader isolates the article and elimanates the ads The keyboard command is Shift-Command-R. You can also find it in the Menu Bar (Command-Option-M) under the word 'View' then 'Show Reader'.
I am using a MACPro with OSX, probably Mavericks 10.9 (where would I look to see if that is the correct information?)
You can find this information under the 'Apple menu' in the Menu Bar. To access the Menu Bar, press Control-Option-M.
Go to Apple Menu > About This Mac. This will open up another window. Use Control-Option-Right Arrow until you hear 'Version'. If you purchased it brand new from Apple within the last six month, more than likely you have Mavericks.
Recommanded Articles.
AppleVis- Commonly used Keyboard Commands
Chapter 2: Learning VoiceOver Basics
Chapter 6: Browsing the internet
Apple Accessibility Resource Page
The 'Commands Help' Voiceover Menu. Control-Option-H-H. (hit H twice) is my best friend. It's a searchable VoiceOver Menu with most of the VoiceOver command. Example: You are looking for the 'Read Current Paragraph' keyboard command. Press Control-Option-H-H and then type Paragraph. It will then bring up all the commands with the word paragraph. I believe there are three.
As from the Trackpad Commands, I've copied and pasted below from Appendix A: Commands and Gestures
VoiceOver standard gestures
If you’re using a Multi-Touch trackpad, you can use VoiceOver gestures. VoiceOver provides a set of standard gestures for navigating and interacting with items on the screen. You can’t modify this set of gestures.
NOTE:Gestures that don’t mention a specific number of fingers are single-finger gestures.
General
Enable the Trackpad Commander and VoiceOver gestures
VO-Two-finger rotate clockwise
Disable the Trackpad Commander and VoiceOver gestures
VO-Two-finger rotate counterclockwise
Turn the screen curtain on or off
Three-finger triple-tap
Mute or unmute VoiceOver
Three-finger double-tap
Navigation
Force the VoiceOver cursor into a horizontal or vertical line when you drag a finger across the trackpad
Hold down the Shift key and drag a finger horizontally or vertically
Move the VoiceOver cursor to the next item
Flick right
Move the VoiceOver cursor to the previous item
Flick left
Move content or the scroll bar (depending on the Trackpad Commander setting)
Three-finger flick in any direction
Go to the Dock
This gesture moves the VoiceOver cursor to the Dock wherever it’s positioned on the screen
Two-finger double-tap near the bottom of the trackpad
Go to the menu bar
Two-finger double-tap near the top of the trackpad
Open the Application Chooser
Two-finger double-tap on the left side of the trackpad
Open the Window Chooser
Two-finger double-tap on the right side of the trackpad
Jump to another area of the current application
Press Control while touching a finger on the trackpad
Interaction
Speak the item in the VoiceOver cursor or, if there isn’t an item, play a sound effect to indicate a blank area
Touch (includes tap or dragging)
Select an item
Double-tap anywhere on the trackpad
You can also split-tap (touch one finger and then tap with a second finger on the trackpad)
Start interacting with the item in the VoiceOver cursor
Two-finger flick right
Stop interacting with the item in the VoiceOver cursor
Two-finger flick left
Scroll one page up or down
Three-finger flick up or down
Escape (close a menu without making a selection)
Two-finger scrub back and forth
Increase or decrease the value of a slider, splitter, stepper, or other control
Flick up (increase) or flick down (decrease)
Text
Read the current page, starting at the top
Two-finger flick up
Read from the VoiceOver cursor to the end of the current page
Two-finger flick down
Pause or resume speaking
Two-finger tap
Describe what’s in the VoiceOver cursor
Three-finger tap
Change how VoiceOver reads text (by word, line, sentence, or paragraph)
Press the Command key while touching a finger on the trackpad
Rotor
Change the rotor settings
Two-finger rotate
Move to the previous item based on the rotor setting
Flick up
Move to the next item based on the rotor setting
Flick down
To customize other gestures by assigning VoiceOver commands to them, use the Trackpad Commander.
Assigning VoiceOver commands to gestures
If you need a reminder about what a gesture does, press VO-K to start keyboard help, and then use the gesture on the trackpad and listen to the description.
Learning about keys, keyboard shortcuts, and gestures
Sorry lots of information. Enjoy. You -
I have a new macbook pro and just made a video on imovie and it asked me to put it on idvd but there is no idvd listed as an option. How can i get idvd. it doesn't seem available
Since Apple has stopped supporting and offering iDVD you'll need to purchase the iLIfe 11 disk from a 3rd party retailer like Amazon.com: iLife 11 which will include iDVD 7.
OT -
I am traveling with my macbook pro and I forgot to install final cut express and quicktime pro before I left. How can I in a way download them for free on my laptop from where I am? I need them and don't want naturally to buy them again!!!
Thank youAssuming you purchased QT Pro, you can always download it again at no extra charge by logging in to your Apple account.
Regarding FCE, there is no way to download & install the product. You need an original FCE install disk and your FCE serial number.
Final Cut Pro X (aka FCPX) can be purchased & downloaded from the App Store.
Maybe you are looking for
-
Hi Experts, I want to load the field Valid_From ( Dec (15) ) to an info object in a dso. The value in this field will be as follows: 20.120.210.000.000 where the first 4 digits will be year, then the next 2 will be month and the next 2 will be the da
-
Bypassing SCAN mechanism in 11gR2 RAC
Hello I have a RAC database version 11.2.0.1 which is working fine. We use SCAN without GNS to handle user connections. Everything is working fine and users are able to connect to the database. Now, I have another server which is used to monitor data
-
Hi there, i need to export a midifile from Logic 9 including time stamp to Pro Tools. So i export midifile from Logic as usual but no timestamp is recognized in PT, also in Logic or other DAW. Where i am wrong ? Appreciate Your help. -A
-
I have a rule that announces the arrival of a particular sender's message with three steps: move the message to a folder, play a sound, bounce the Mail icon. In recent weeks, the message arrives, gets moved, and the icon bounces. Sometime later, when
-
Field Header / Column Header Dynamic Name change
Hi, I have built a query using SQ02 and SQ01. I have a question, what is the easiest way of changing the Column Header using ABAP Code? I have 3 columns which i have added myself, 1st colum name should be the current month 2nd column name should be c