Sat Pro A60: ati2dvag display driver not working properly

help.... i know very little about computer and need to know what, how and where i can get a solution to this problem. It occurs more and more frequently now, it messes up the display and i have to restart only for it to happen again. i tried to down load bios 1.90 and will hope it works like some similar ports have said but what else can i do? any help from anyone would be so great
[Edited by: admin on 19-Aug-05 23:28]

Hi
Well, you can try to recover your system. If the problem remains so the best way is to contact the Toshiba ASP. You can find the right service partner on this site:
http://eu.computers.toshiba-europe.com
Bye

Similar Messages

Dvd drive not worked properly

i have hp pavilion dv4 series.my dvd drive not worked properly.for that purpose only i went 7 times in your service centre but they won't take action till now .why u people do like this .i want explation and just change my dvd drive that's all.

tcrite,
Sounds like a bad drive...I would get a replacement. According to Accelerate Your Mac database, it should work without issue.
Just enter the model number of the drive and select your Powerbook G3 2000, and you will see four reports on this model.
http://forums.xlr8yourmac.com/drivedb/search.drivedb.lasso

Satellite Pro A60: ATI display driver keeps breaking down

I have had my Sat pro A60 Laptop for about a year now.
I have had a few problems with it since I got it but the main problem has just occured within the last 6-7 months.
The ATI display driver keeps on breaking down and in order for it to work I have to restart the system. This has been an ongoing problem for quite some time and it's now getting rather irriating. It does it at the most inconvenient times like when I am watching a DVD or listening to a CD.
Sometimes when I put the computer on standby, the display doesn't even start up again and the screen remains blank. In order to sort this out I have to switch off the laptop and then restart it. The main problem I have put this down to is overheating as it can get quite hot when I use it.
I sort of know how to sort this problem out, just by clearing dust from the fans. But if there is any other solution to this please help.
Thanks!

Hi
Mostly the overheating happens because of the dirt and dust inside of the cooling modules. The fans cannot work properly and cannot spin with full performance.
I think you should check the fans. I think the easiest way to clean the fans is to use the vacuum cleaner hose against the fan grilles.
About the display issue: In your case I would recommend firstly to update the display driver. Additional if the OS runs since a long time on the notebook so maybe a new OS installation form the Toshiba recovery CD would help.

Driver not working properly

My laptop model is hp probook 440 G0.its graphics card number is AMD 8750M. it was work fine windows 8.1. But today i update into windows 10. i installed version 13.x.x but it not work. Then i go to device manager and update driver and it comes version 15.x.x. And show no errors but it is not work properly. In "dxdiag" display memory is only 1796 but in windows 8.1 it show 3047. I have also another graphics which is Intel HD graphics 4000. Now what can I do to run solve to problem?

Welcome to the forum!
Did you install the Windows XP Chipset Driver for your model prior to trying to install the Ati driver? The chipset driver must be one of the first drivers installed so that the operating system can correctly identify the rest of the installed hardware for their driver installation. Once the chipset driver is installed, reboot and then try installing the Windows XP version of the Ati driver.
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

SD-R6012 1334 DVD-R/RW Drive Not working properly

Hi all,
I was hoping someone could help me. My SD-R6012 DVD drive copies CDs fine, but wont burn any DVDs. Ive tried to install the firmware upgrade for it, but it comes back with the message:
"CD-Drive firmware is NOT need to update firmware"
Please help!
Many thanks
Dan

Hi
Check this page:
http://www.toshiba-europe.com/storage/Index.asp?page=PFT&nav=ISH_ARC&stype=product&ptype =&frame=content&model=SDR6012
There you will find the newest firmware and drivers. If after this installation the drive doesnt work properly so I assume it has a malfunction.
In this case the only way is to contact the service. There you will get more details.

USB Hard Drives Not Working Properly?

I have an MSI K9N Neo V2/V3? (msi-7369) motherboard with 2GB Ram and an Athlon 64 x2 4200+ processor.
I have a strange USB Port problem! I have a 5 year old home built machine running Windows 7 32bit. Lately the USB ports on the front and back of the machine are not working properly with external hard drives? USB powered or mains powered. They are recognised and show all the folders but If I try to view or transfer anything it freezes the drive?
The ports are working fine for USB sticks though?
I have removed the USB controllers and let the system reinstall them again, but its no better?
I would format the drive and reinstall windows but I have not backed-up all my videos I want and my system restore has been disabled?
I have tried a new USB PCI card but the same happens?
I have updated the bios and all updates with the MSI Live update program.
Can anyone recommend anything to try before I start removing stuff?
Someone told me to update my USB drivers but I can't find any?
Any help appreciated

I have formatted and installed Windows 7 64bit and USB's were working!!
Updated and now they don't again?
Its going out the window soon!!
Could the firmware update play a part? Am I able to go back to the older firmware?

Device driver not working properly

windows reports that the BHDrvx64 device is not working properly. have tried everything to fix including system restore. windows does not have an update for this device, also tried hp software and driver downloads site and could not get specific information on exactly what kind of device it pertains to. right now system is not to bad and would hate for it to crash on me

Lia.
Are you using Norton???
REO
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.

Satellite Pro A30: CD/DVD drive not working - How to restore OS?

I want to run the recovery discs to restore my laptop to original condition but the cd/dvd rom is not working.
Does any one have an idea how I can do this either by connecting my laptop to another pc or is there a programme on the web I can access to do this for me.
Bacically even after running CCleaner and other programmes the laptop is still running slow and struggling.

Hi mate
Im not quite sure if the old Sat Pro A30 is able to boot from USB drive. In such case you could try to install the OS from USB flash stick.
Here is a interesting posting about this theme:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=63986

Satellite Pro A100 (PSAACE) - Display is not working

Hi all,
Got a problem that's confused me.
A few weeks ago my very old Sat Pro a100 (PSAACE) started to refuse to display anything on the screen.
This is from boot, i.e I press the power button from cold, the system whirls and fan goes both nothing appears on the screen.
I left the laptop alone and noticed it popped up on my network, so I remote desktop connected in and everything was working, but still no display on the actually laptop.
Thinking it might be a wierd setup I started Pressing Fn + F5 to swap between displays, at this point I managed to get a display back on the laptop screen.
However on next boot it did the same, this went on for a few days with me pressing Fn+F5 to get a display.
Then the Fn+F5 stopped working, I could still remote desktop in and use the laptop but I couldn't get anything to display.
In windows the ATI Mobility 1400 had disappeared from Device Manager.
I figured the VGA controller board had blown so ordered a new one.
I have now fitted this, and it hasn't resolved the issue. The Fn+F5 workaround is working sometimes, but gives a very weird display looking like corrupted fonts etc
*However if I do a screen grab of this and view on another PC the fonts and screen appear normal!!*
The Mobility 1400 is now recognised by Windows but still nothing on the display at either during POST, boot or Windows.
Fearing BIOS corruption I re flashed with the 6.00 official BIOS.
All in all the machine works great, just no display or by pressing Fn+F5 I can sometimes get the +corrupted display+.
Lastly I've hooked on an external display, at no time do i get any display on it regardless of Fn+F5, or windows, POST etc..
Any thoughts? Would a faulty LCD/FL cable cause these type of problems? or even a faulty inverter board? or since I have no external display am I looking at a main board fault?
Happy to carry out any further tests anyone can think of.....
thanks in advanced for the help
Richard

Hi,
you are correct I see nothing on external monitor, regardless of Fn+F5.
I can boot the machine and log into it remotely though remote desktop, vnc etc once in I can use the machine as normal just without a screen.
On the occasion when Fn+F5 does bring back a picture, its very distorted - almost to the point of corrupt. However a screen grab of that and then viewed on another machine shows the capture to be perfect.
So the fault lies somewhere between what the main board and the screen.
As I noted previously this laptop has a seperate VGA controller card which I have replaced with a know working one.
I have no replaced the RAM, and CPU on the off chance. The only thing I dont have is a new mainboard lol
Still no different.
any thoughts?

Upgrade to windows 10, display driver not work

the issue is video card has no working driver detect. I can't get error code ,because teh screen is not display any thing.I am sure the computer is boot up, as it can be access by teamviewer and show a 640x480 screen. currently , I am using miscrosoft default display driver . instead of intel and AMD driver. to show 1024x168 screen , at least I can see someting now... and the fan is screaming .. my product type is HP Pavilion dv4-3126tx QG429PA#AB2 display card is Intel HD Graphics 3000 and AMD radeon 6600m and 6800m (not sure excatly, may be 6750M) I am running windows 10 64bit much thanks

all solution I have tried , but not work not working driver include - the windows update give a driver from 2015 july 15 - Radeon (TM) HD 6750M ver 9.0.0.0 2012/8/15 - AMD Radeon 6600M and 6700M series ver 15.200.1046.2 2015/7/15- AMD 12.10 DriverVer=09/27/2012, 9.002.0.0000- AMD 15.6 DriverVer=06/19/2015, 14.502.1014.1001- AMD 15.7 DriverVer=07/15/2015, 15.200.1062.1002- intel(R) HD Graphics 3000 ver: 9.17.10.4101 2015/1/30- intel(R) HD Graphics 3000 ver: 9.17.10.4229 2015/5/26- intel(R) HD Graphics 3000 ver: 9.17.10.4229 2015/5/27 do I need to install both intel graphic deriver seperatly ? the old win7 and win8 driver tell me , not install intel graphic driver , I must instal AMD driver which include intel already.......

GTX 460 display driver not working in AE CS6

Hi everyone im currently having problems with After Effects, My GTX 460 is currently undetected by AE CS6 when i check out the gpu information it says (GPU not available - incompatible device or display driver)
I don't see how i am getting this problem as i have the latest drivers and the the gtx 460 has 336 cuda cores therefore it should be compatible with After Effects Should it not ???
Any help will be much appreciated unless it has to do with drivers, believe me it's not the drivers -.-

Same old, same old: What's not listed on the product pages is not officially supported for the respective features and the GTX 460 is not listed as supporting Raytrace 3D. It should support all conventional OpenGL stuff and fast previews without issues, though, so update your graphics driver or try a different version and configure it properly so AE can detect it.
Mylenium

Latest display driver not working on Satellite A660-11M

Hi all,
I'm trying to install the latest display driver downloaded from toshiba drivers section.
When i have downloaded them i started the installation but it doesn't run. I have tryed to instal "as administrator" i have tryed to install without the user account control but nothing to do.
I have tryed to install lauching every single file like "tinstallwb" "tinstall" and "setup.exe". The last one says that it can't recognize the hardware.
I have alway installed toshiba driver only. I have windows 764 bit home premium.
P.S.
I have already installed the new version of the bios(1.8)
Could anyone help me?
(sorry for my english but i'm italian)

I Installed yesterday latest drivers from Nvidia official page, and they work perfectly on the A660-11M, brightness and all controls, and now the Mercury Hardware engine in Adobe Premiere CS5 is working perfect!!! .. .version 260.99 released yesterday:
http://www.nvidia.com/object/notebook-win7-winvista-64bit-260.99-whql-driver.html
RELEASE HIGHLIGHTS :
This is the second WHQL release from the Release 260 family of drivers. You can read about the major new features and performance improvements in the Release 260 family of drivers here.
This driver supports the following NVIDIA notebook GPUs (please refer to the Products Supported tab for exceptions):
ION notebook GPUs.
GeForce 8M, 9M, 100M, 200M, 300M-series, and 400M notebook GPUs.
Quadro 5000M
Quadro NVS-series notebook GPUs (only those that support DirectX 10 or higher).
Quadro FX-series notebook GPUs (only those that support DirectX 10 or higher).
New in Release 260.99
Increases performance vs. v260.89 drivers in the following PC games: Civilization V (SLI), Fallout 3, Final Fantasy XIV, and Formula 1 Racing (DX11).
Adds SLI profiles for the following PC games:
Need for Speed: Hot Pursuit
Star Wars: The Force Unleashed II
Fallout: New Vegas
Improves compatibility for Fallout 3: New Vegas with antialiasing enabled.
Improves Alt-Tab compatibility for several PC games.
Additional Information
Installs HD Audio driver to version 1.1.9.0.
Includes PhysX System Software to version 9.10.0514.
Supports the new GPU-accelerated features in Adobe CS5.
Supports GPU-acceleration for smoother online HD videos with Adobe Flash 10.1. Learn more here.
Supports the new version of MotionDSP's video enhancement software, vReveal, which adds support for HD output. NVIDIA customers can download a free version of vReveal that supports up to SD output here.
Supports DirectCompute with Windows 7 and GeForce 8-series and later GPUs.
Supports OpenCL 1.0 (Open Computing Language) for all GeForce 8-series and later GPUs.
Supports OpenGL 3.3 for GeForce 8-series and later GPUs.
Supports OpenGL 4.1 for GeForce 400 series GPUs.
Supports single GPU and NVIDIA SLI technology on DirectX 9, DirectX 10, DirectX 11, and OpenGL, including 3-way SLI, Quad SLI, and SLI support on SLI-certified Intel X58-based motherboards.
Supports GPU overclocking and temperature monitoring by installing NVIDIA System Tools software.
Users without US English operating systems can select their language and download the International driver here.

DVD drive not working properly.....

here's the info on whats going on:
when i try to put in a CD/DVD it spits the disk out right away. after trying to put it in about five times or so, the drive takes it, makes its fancy noises to make me think that its reading the disk, but the computer doesnt recognize that it has one in the drive. sometimes it spits the disk out, but other times it will just keep it.
ive been reading posts from other users with similar issues and done everything that everyone has tried i.e. going to disk utilities and "verifying the disk" (it says everything is working normally), tried to "repair" the drive, and when i go the the info section about my disk drive it says that its read/writable, but not ejectable.
here is the info that it gives me, maybe this could be of some help to try and narrow down the possible problems:
Name : FUJITSU MHY2160BH Media
Type : Disk
Partition Map Scheme : GUID Partition Table
Disk Identifier : disk0
Media Name : FUJITSU MHY2160BH Media
Media Type : Generic
Connection Bus : Serial ATA 2
Device Tree : /PCI0/SATA@1F,2/PRT0@0/PMP@0/@0:0
Writable : Yes
Ejectable : No
Mac OS 9 Drivers Installed : No
Location : Internal
Total Capacity : 149.1 GB (160,041,885,696 Bytes)
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 0
the last thing that i havent done is do a full restart of the computer. that is my last resort. anyone have any ideas on what to do?
thank you for your time.

I have a question similar to this.....
Just recently (no updates/changes, etc) my CD drive stopped working. It won't let me enter a CD at all. It is as if there is something in there blocking it. I tried restarting the computer, but that didn't help. It acts like I have to force it in there, but I really don't want to do that. As far as I know there's nothing in there, as I rarely use the drive. Please advise if there is any sort of resets I can do for the drive (I'm still trying to get the hang of my MAC).
Thank you for any assistance!!!!

ATI driver not working properly on windows xp

hello sir,
i have a problem and hope you can fixed it for me. the problem is, when im installed windows xp on my laptop. only Intel hd driver working but the ATI driver is not working ( not detetcted when done install driver). im trying install driver manualy, but still not working. So i dont know if ATI driver only used for window 7 or both. im used
G470 model 20078
Intel (r) celeron(r) CPU B800 @ 1.5GHz
tq

Welcome to the forum!
Did you install the Windows XP Chipset Driver for your model prior to trying to install the Ati driver? The chipset driver must be one of the first drivers installed so that the operating system can correctly identify the rest of the installed hardware for their driver installation. Once the chipset driver is installed, reboot and then try installing the Windows XP version of the Ati driver.
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

Optical DVD drive not working properly: HP notebook g61

Game disks and dvd movie disks not working consistently. Sometimes detected as empty dvd disk and asks if I want to burn to the disk. Other times does not read that there is a disk in the drive. Computer is about one month old. On one of my game disks, I have to reinsert 4 or 5 times before it will read properly. Any suggestions?

Sounds like you use the disk drive a lot. Before we panic and recommend a new drive, try a DVD lens cleaner you can pick up at any place that sells a lot of DVDs, like even WalMart. Run the cleaner disk and see if that helps.

Sat Pro A60: ati2dvag display driver not working properly

Similar Messages

Maybe you are looking for