Sata 2 PCMCIA card for mac

Hi,
is there a SATA pcmcia card for powerbook pro & macbook pro?
I've tried the sonnet website but doesn't see any.
thankx
jp

Yes, check out http://firmtek.com/seritek/seritek-2sm2-e/ The PowerBook wouldn't use the same one as a MacBook Pro would... different slots. But they're made for both.
Jerry

Similar Messages

ATI 5770 1GB Video Card For Mac Pro dvi hdmi cable

I am sending video signal over a 50FT HDMI To DVI from my Mac Pro (3,1) via ATI 5770 1GB Video Card For Mac Pro (5.0 GT/s) (181062917108) and I cannot get a constant signal to my TV. The signal stays on for a few seconds or several hours or my TV (Samsung) says there is no signal or I get just a gray static screen.
I never had a problem before with my previous video card the 512MB nVidia GeForce 8800GT with a 25ft long cable. Any ideas people?

A cable of about 5 meters (16 ft) can be manufactured to Category 1 specifications easily and inexpensively by using 28 AWG (0.081 mm²) conductors.[114] With better quality construction and materials, including 24 AWG (0.205 mm²) conductors, an HDMI cable can reach lengths of up to 15 meters (49 ft).[114]
from: http://en.wikipedia.org/wiki/HDMI
You may need a higher-quality cable or a lower resolution for your display to make this work without an HDMI Repeater.

"fire wire" video capture cards for mac pro

....Have Power Mac ver. 10.9.5 system Maverick w/ 4 MB RAM & am trying to locate hardware for:
acquiring "FIRE WIRE" video capture cards for mac pro.... ? Any suggestions....?(Just purchased Adobe CS 5 premium)

Your question doesn't make much sense.
What type of Mac Pro do you have? Is it the new black cylinder or the old style silver tower?
Firewire is built-in to the old models & the new Mac Pros can use Thunderbolt to Firewire converters to capture from Firewire sources.
Maybe like this http://store.apple.com/us/product/MD464ZM/A/apple-thunderbolt-to-firewire-adapte r
Many older cameras used Firewire for capturing, but that has been replaced by other connection types. What are you trying to capture from?

Suggest me a usb sound card for mac mini

please suggest me a usb sound card for mac mini (i need 5.1 sound)

The Griffin Technology FireWave will give you the 3 'cables' ("FireWave outputs six channel audio through three 1/8” (3.5mm) stereo mini-jacks: Left/Right, Center/Subwoofer and Right Surround/Left Surround.") connection for surround sound (speakers) audio. Whether or not a particular headphone set is compatible, you might ask Griffin directly about that. If you're playing a DVD with VLC or the Apple DVD Player, you will get surround sound. But, you'd have to find an MP3 with multi-channel audio inside it to play surround sound out of iTunes.
-Doug

CC 2014 and GTX 680 Graphics Card for Mac

I am using a NVIDA GTX 680 card for Mac and with Premiere CC and I can use the Mercury Engine with Cuda. I am running a Mac Pro 12 Core with OS 10.8.5. When I launched CC 2014 it told me to update the Cuda drivers for my card otherwise Premiere could not access the Cuda drivers. Question I have is does anyone know the driver numbers I need to have and do I have to upgrade to Mavericks to take advantage of the drivers. Once these drivers are installed will it interfere with using Cuda in Premiere CC?
Thanks
Mike

Yes, Premiere Pro CC adds full GPU acceleration certification for the GeForce GTX 680 on Mac.

Any recommendations for a new Graphics card for Mac Pro?

Any recommendations for a new Graphics card for mac pro edit in Premiere 2014 and I need to have output to a monitor my current graphics card is ATI Radeon HD Graphics 5870 1024 MB I find better for what I need?

Look at this EVGA card for the Mac

Are there PCI thunderbolt cards for mac pro 3.1?

are there PCI thunderbolt cards for mac pro 3.1?

DCWinton wrote:
Rick
It's that last sentence I'm curious about. "However a MacPro already has much more capability already built in than Thunderbolt can add."
I'm thinking of getting a Mac Pro, but see that it doesn't seem to have Thunderbolt. I'm not sure if I care. The reason for the Mac Pro is that I'm topping out my 8gb RAM 27" iMac capacity with the volume of work going through it, and my tech tells me I'm pushing it too hard. I use it to run a small law office, but usually have about 15 apps open, with lots going on in the network in the background.
Is there any reason to wait until Apple puts Thunderbolt into the Mac Pro?
Thunderbolt will not increase the performance capability of the MacPro. It will add a bus that can be convenient, especially later on when Thunderbolt devices become more common, more mature and better supported - oh, and with more common will come less costly. From a pure performance standpoint the existing PCIe slots are much more capable and cheaper to implement. You would be giving up nothing with a current MacPro.
My opinion. Thunderbolt is really a great move forward in the long run - needed something to replace Firewire and this is it. But there is no reason to wait on Thunderbolt on MacPro - it is redundant.
Rick

5.1 or 7.1 soumd cards for Mac G5 10.4.11?

Hi
this seems like the best place to ask this question
can anyone recommend a 5 or 7.1 surround sound card for Mac, its just for playback
of films, not mixing, one that works without any grief and wont conflict with my Digi 002. er you know just regular domestic pci card thats half decent.
So no truck size rack mounted dolby decoders please.
Regards
James

the best value/quality is Motu Ultralite mk3
Firewire!!!
BUT, the PCI Motu options should be also great...
I'm talking about professional Audio Quality
there is also the V4HD
http://www.v4hd.com/
(great for Final Cut Studio users)
Motu devices comes with all professional connectors options at best possible price (value for quality).
Just my personal opinion
G

Good capture cards for Mac?

Does anyone know of capture cards for Mac that work well for FMLE?
The list of tested cards in the Device Compatability Matrix only appear to be for Windows.
I see discussions about the Blackmagic cards, for example, that indicate those have problems in many situations.
Any tips are much appreciated.
Thanks,
Sage

Thanks! And the Canopus ADVC 110 is also external via firewire, which is
even better.
Cheers,
-sage

Recommended Wireless PCMCIA cards for IBM laptop w/ Airport Extreme network

Does anyone know the best performing PCMCIA card for use on an Airport Extreme wireless network?
I have an IBM R40 laptop.

RHESKE, Welcome to the discussion area!
Does the WinXP laptop have wireless capability? If so, what have you tried and what were the results?

3rd Party SATA raid cards for internal drives?

All --
Apart from the discussion as to if RAID actually benefits a home desktop system, I am wondering if anyone has the lowdown on using 3rd party SATA raid cards to support the INTERNAL hard drives on the Mac Pro series?
My Mac Pro is still slated to be built at Apple and for now I have the minimum memory and HD spec being requested at Apple, with the plan to upgrade the memory and drives from OWC or another vendor.
I've toyed with the idea of utilizing Disk Utility's software RAID features (e.g. RAID 0 for scratch disks, RAID 1 for boot, RAID 0+1 for all else.) I've also toyed with the notion of searching for a hardware raid solution which would allow me to transfer the internal SATA cable runs from the motherboard to a host adapter card for an internal multi-channel experience (with options to create and break mirrors to external devices for backup purposes.)
So....
Has anyone experience or utilized 3rd party hardware raid controllers which can connect to the internal HD bays? Are there limitations to this (ie, does the boot drive HAVE to reside off the internal motherboard controllers, or can an internal hardware controller successfully boot the system) of which ought be noted?
Finally, in the event that a host adapter card cannot drive the interna bays, can anyone give feedback to hardware SATA cards to power external drive bays with support for Disk Utility (to allow RAID1 pairings of internal drives to external snapshot-backup drives)?
Thanks for your time,
Ian Poulin
Richmond, Va

I am wondering if anyone has the lowdown on using 3rd party SATA raid cards to support the INTERNAL hard drives on the Mac Pro series?
There are many 3rd party controllers that support the internal HDs if an internal iPass connector is used. The problem is that some are bootable but most are not.
The Areca ARC-1680ix-12 and the HighPoint RocketRAID 4320 are bootable. However, the system cannot be installed via the Apple DVD. Instead the user needs to clone a boot drive with the proper drivers to the boot volume on the controller and then boot from the 3rd party controller.
The other issue I found is that these controllers do not support Boot Camp. If Boot Camp is desired, my recommendation would be to leave the internal HDs on the Mac Pro internal bus intact and use the 3rd party controller for external storage. This method provides four internal bays that are bootable, support Boot Camp and can be used for system backups. I use the 3rd party controller for external storage for large RAID sets and hot swapping hard disks.
With the internal bays intact and external hot swap RAID storage available the user can support Boot Camp, multiple system volumes and large external RAID sets. From my experience using a 3rd party controller with the internal HD bays always has some limitations. The user usually does not realize it unit later when Boot Camp does not work or the computer fails on a system upgrade or the controller does not work at all with a new version of Mac OS X.
Staying with the standard internal Mac Pro bay configuration will be the best configuration to avoid compatibility issues with future versions of Mac OS X. It is rumored that the new Snow Leopard may require 64-bit drivers. If that is the case, I would expect most if not all existing 3rd party controller drivers to fail. Some drivers will be upgraded after a few months while others may not. Having the internal Mac Pro SATA controller intact should at least allow the Mac Pro to boot if my guess about compatibility issues is correct.
can anyone give feedback to hardware SATA cards to power external drive bays with support for Disk Utility (to allow RAID1 pairings of internal drives to external snapshot-backup drives)?
There are a large number of external controllers that work with Disk Utility. Here are some of my favorites.
1. FirmTek SeriTek/2SE2-E and the SeriTek/5PM
http://firmtek.stores.yahoo.net/sata5pm2se2.html
http://www.amug.org/amug-web/html/amug/reviews/articles/firmtek/5pm/
2. Sonnet Tempo E4P
http://www.amug.org/amug-web/html/amug/reviews/articles/sonnet/mac-pro/
3. DAT Optic eSATA_PCIe8
http://www.amug.org/amug-web/html/amug/reviews/articles/datoptic/pcie8/
Have fun!

Raid 5 Card for Mac Pro

Hello all!
I am a video editor and am currently building my own system out.. I am on my last step of upgrades now and I need to build a RAID. At work we have the huge fiber channel RAID 5's, but this is for my personal use. So what I want to do is get the High-Point Rocket 2310 card and create and internal RAID 5. I just hate having backup procedures so I think this will offer me exactly what I need. But I just can't figure out how people hook these things up????? I have all 4 drive bays maxed out with 1TB drives. I want to put 3 of them on the card but I don't see how I can connect them to the back of the card via a sata cable if they "plug" into the slots on the mac pro. How do I connect these 3 drives to the card?? I just can't find out anywhere online Does the Raid card access the drives through the PCI slot?? any thoughts would be greatly appreciated.. Thanks all!

Hi,
I cannot recommend using an internal RAID 5. The reason is that it will provide slow performance and limit the expansion capability of the RAID 5 volume and the Mac Pro.
While RAID 5 adds redundancy, there is no guarantee that the volume can be rebuilt. You still will need to backup any important data. If you thought that RAID 5 eliminates the need for a backup you will not be happy when the RAID 5 volume cannot be rebuilt and all of your data is lost.
The problem with a three drive RAID 5 is that one disk is used for parity data. This only leaves the space of two disks for creating the volume. Even if three 1TB HDs are used you are limited to approx. 1.8TB with a three disk RAID 5 and the performance is limited to a dual drive RAID 0. If your requirements are this meager you will be better off with a dual drive RAID 0 and a SuperDuper Backup disk in bay three. This will provide higher redundancy and is much cheaper.
If you really want a RAID 5 configuration, I would use an external solution which can provide room for expansion and much higher performance. This setup allows the internal Mac Pro bays to be used for Mac OS X, Boot Camp, importing data and backing up data. While the external enclosure supports the RAID 5 volume.
The setup I like for an external RAID 5 solution is the FirmTek SeriTek/5PM enclosure used with the HighPoint RR2314. This provides a five disk RAID 5 solution that has a small foot print, quiet operation and a high quality enclosure. You can read more about it here:
http://www.amug.org/amug-web/html/amug/reviews/articles/firmtek/5pm/
http://www.firmtek.com/seritek/seritek-5pm/
http://www.amug.org/amug-web/html/amug/reviews/articles/highpoint/2314/
http://www.amazon.com/exec/obidos/ASIN/B000NAXGIU/arizomacinusergr
If you do not mind spending more you could configure a RAID 6 ARC-1680ix-12 configuration using the information found in this AMUG article:
http://www.amug.org/amug-web/html/amug/reviews/articles/areca/1680ix12/
However, if you are looking for a high quality RAID 5 solution that is reasonably priced I find the SeriTek/5PM and the RR2314 are an excellent choice.
Have fun!

ESata card for Mac Pro (Early 2008)

I am looking for another two port eSata card for my Mac Pro (Early 2008) model. The card I ordered before Christmas from Amazon (UK) has just arrived but doesn't fit (Lacie eSATA PCI CARD)
http://www.amazon.co.uk/LaCie-130823-eSATA-PCI-Card/dp/B001O9KEKM/ref=sr11?ie=UTF8&qid=1294318895&sr=8-1
It's only for two drives I use from time to time to back up my HD Video (personal family stuff only).
Any recommendations?
Many thanks, Matt

I have the Sonnet E2P in my Mac Pro Early 2008. Also available in UK from here:
http://www.macupgrades.co.uk/store/productinfo.php?productsid=421
And "Yes": that arrangement is the PCI-Express card connector - that's what you need.
!http://www.macupgrades.co.uk/store/images/381-img-main.jpg!
It's definitely a Mac card - Sonnet product page here has latest drivers, etc.:
http://www.sonnettech.com/product/temposatae2p.html
(Currently = v 1.2.5)
Edit: you could always use one of these:
http://www.macupgrades.co.uk/store/productinfo.php?productsid=511
!http://www.macupgrades.co.uk/store/images/466-img-main.jpg!
It extends the unused motherboard SATA ports to the back panel. Cheaper, but requires you to partially disassemble your Mac Pro to install it, and the drives thus attached are NOT swappable while your Mac Pro is powered on - necessitating a power-cycling of your Mac to mount/unmount drives connected to this card.
With the E2P you can mount/unmount drives without powering off your Mac. I'd go with the E2P!

Raid cards for mac pro 2.66

i would like to set up a hardware card for my os as raid 0
(2 10,000 rpm hard drives)
and a hardware raid 1 for my data.(same/separate card ??)
are there any sudgestions on makes and models and compatability?
i am aware of the software raids provided by the os, i've heard they are not as reliable and fast as the harware solution, agree, disagree???

Yeah they say the software raid is good and I can't say first hand but I have heard good reports. In general I prefer hardware RAID but i setup server not clients so. Was using acard.com stuff for a bit but there offerings have gone down on the mac side. My current card of choice is Highpoint's Rocket RAID.
http://www.highpoint-tech.com/
Card works good and drivers all appear to be up-to-date with Intel based Mac's now. Nice web-GUI to the Raid controller. My only complaint could be OS related as opposed to driver but the Hot-Swap won't work right. In order for me to swap i need to drop the drives from the server and pull them. (alarms alarms, lol) Then put my swaps in. Seems the release call from the web-GUI does not kick the drive out right or the Mac OS won't let go of them even after un-mounting.

I am trying to find out the proper graphic card for mac.

I am trying to find out the proper graphic card for imac. The graphic card which is mentioned in the web sit, that Graphic Card is not available in the open market. In open market NVIDIA GeForce GT 750M and NVIDIA GeForce GT 755M is available and this card is not mentioned in web site. So please help to select a proper suitable GPU.

Are they supportable for After Effects ray-traced 3d renderer.
I am confused because adobe recommended on the following graphic card.
Mac OS
GeForce GTX 285
GeForce GTX 675MX
GeForce GTX 680
GeForce GTX 680MX
GeForce GT 650M
Quadro CX
Quadro FX 4800
Quadro 4000
Quadro K5000

Sata 2 PCMCIA card for mac

Similar Messages

Maybe you are looking for