SATA boot with IDE hard dr. installed

Newbie here. I'm so proud of myself. MoBo is KM4M-V w/latest BIOS and Athlon XP 2600+ CPU. 2 CDROMs, Zip Dr. and 60GB HD in a Pull-Out use up all 4 IDE's. So I had to use SATA 80GB as boot up. With 60gb NOT plugged into Pull-out, Win XP installs perfectly. In CMOS, bootup priority set to 1)Floppy, 2)CDROM, 3)Disabled, Other Boot Dev. also disabled.
If ANY HD is in IDE Pullout, system tries to BOOT from that device and fails boot. Removing HD from pullout, boots fine.
Called MSI Tech Support (I LOVE MSI!), The Man said, "Change 1st Boot Device to SCSI". Now boots fine, with or without HD in pullout.
Just thought you'd want to know.

all addon ide controllers and raid is called scsi.
also alot of sata is called scsi too.

Similar Messages

Imac won't boot with new hard drive installed

So I installed a new 1Tb caviar black in my PPC G5 Imac, but when I turn the computer on, I get no video, no startup chime, nothing. The power light does come on, and fans start running after a minute or so, but thats it. I can't boot from the install disc.
The computer boots up as expected when I remove the drive(startup chime, grey screen, missing folder icon).
Any suggestions to what the problem is? Any help would be greatly appreciated.
-D

wierd i have similar problem. I removed HDD after crash to backup in an enclosure before reinstalling os again, put the hdd back and connected the hdd sensor backup (although i thought it was a knock sensor..doh!) . Mac wouldnt start, no screen, no chime, nada, but sleep light stays on. With PCs this usually mean CPU fault so i removed RAM to see if could get a BEEP meaning CPU is ok as it spots ram. No beep. So after checking everything i stripped out ram, hdd, airport and battery and reset PMU, tried again and now i get beep!! so cpu works. slowly adding everything back in and trying power up, last thing to go in was hdd sensor and sure enough when this is connected i reproduce the symptoms. So i disconnected the sensor and tried and i get chimes etc... Ive inspected the cable and made sure is connected right way up and still cant get to work. So it seems sensor is goosed! Debating wether to replace just yet

PowerMac DP G4 Won't Boot With All RAM Sticks Installed

A few weeks ago, my 800 MHz dual-processor G4 started having frequent kernel panics. I tried all sorts of things, including changing the PRAM battery, resetting the firmware, and resetting the PMU. Then, one day, it would only power up but not boot, so I took it in for repairs.
The shop I took it to determined that the logic board was malfunctioning and replaced it. The computer no longer has any kernel panics.
The machine was designed for three 500 MB RAM sticks, which is what it had ever since I bought it over five years ago. Now, apparently, it won't boot with the last one installed, though it will with two. The shop replaced the new logic board and and even swapped RAM, but the problem still persists. Neither the power supply nor the hard drive appear to be malfunctioning.
Does anyone have any ideas what's going on? Any ideas or advice would be greatly appreciated.
Thank you.
G4 800 MHz Dual Processor Mac OS X (10.4.9)

squeakmaster, welcome to Apple Discussions.
Have you tried the following with one 512MB RAM stick:
1. Palce it in the first RAM slot. Does the Mac boot?
2. If so, remove the stick & place it in the second RAM slot. Does it boot?
3. If so, remove the stick & place it in the third RAM slot. Does it boot?
The results of this test should reveal (1) if the stick boots in one or more RAM slots, the RAM is good and (2) if it fails to boot in a RAM slot, there is a problem with that slot.
Do this with each of the tree RAM sticks & post back the results.
When the logic board was replaced, was the firmware updated to be compliant with OS X. (Note - The firmware is installed on a chip on the logic board.) Check your Mac's firmware (Boot ROM version) version. Mac OS X: Available firmware updates
http://docs.info.apple.com/article.html?artnum=86117 If an update is required, the update must be installed (using OS 9) BEFORE you install OS X.
Can you boot up in OS 9.x? If so you can use DIMM First Aid - Check & recover disabled (missing) RAM from Apple's latest firmware updates http://www.versiontracker.com/dyn/moreinfo/macos/10415
 Cheers, Tom

K7N2 Delta2-LSR - SATA disk does not boot with IDE disk connected

I have K7N2 Delta2-LSR with SATA 160GB drive and CD burner connected as primary master.
When I'm connecting any IDE hard disk, the mainboard detects it corectly, but I'm not able to boot from SATA drive.
I tried to turn off IDE drive detection in BIOS (set [None] instead of [Auto]) and SATA boots!!! And Windows XP and Linux can see both disks!!!
Is it a BUG in BIOS?
Maciek
K7N2 Delta2-LSR (with latest BIOS Sep 18, 2004)
Athlon XP (Barton) 2800+
SATA drive WD 160GB
GF4MX440
FSB333, DDRAM 512MB/400
PSU 350W, works stable with 2 HDs and CDRW.

Strange my board boots fine from SATA with a PATA HDD connected. XP and Linux will see any disks connected to the motherboard and powered up in your system even if disabled in the bios apart from those connected to a separate raid controller which should be enabled. Both these operating systems address the hardware directly once their drivers are loaded so will ignore the settings you have in the bios. This behaviour is normal and not a bios bug. The main boot disk has of course to be enabled in the bios for the boot loader to operate. The boot priority with the new south bridge is PATA first followed by SATA and XP uses this too. To ensure that XP boots from SATA properly the PATA drive must be disconnected during the install process. You also need to ensure that the SATA disk is the only active partition connected to your system. If the PATA disk has been used to boot an operating system previously there may still be an active partition present on the drive. If that is the case removing the active partition should cure the problem but if the present arrangement works for you then fine.

MacBook Pro won't boot with new hard drive, but a different MacBook Pro will

So here are the details. My friend and I both have 13-inch Mid 2010 MacBook Pro's. Same processor and specs since they were purchased at the same time, but originally had 250 GB hard drives. His hard drive failed and needed a new one. Put a 500 GB Seagate Momentus 5400.6 in his computer, and tried using a flash drive with "Install OS X Mavericks" on it to install Mavericks on his new hard drive. No matter what, it wouldn't install. I finally was able to install OS X 10.9.4 on it by connecting the new hard drive to my computer with a USB hard drive enclosure. I put the hard drive back inside his computer and it wouldn't boot (stuck on the gray screen with apple logo and a spinning wheel). I then attached to the hard drive to his computer externally with the USB enclosure, and then it booted and worked perfectly.
So, it seemed like the problem was with something inside his computer, but then I switched our drives, and that doesn't seem to be the case anymore. I put my original hard drive into his computer, and his new hard drive into my computer, and they both booted and worked perfectly, so I have no idea why his computer will not boot with the new hard drive internally.
To summarize, his computer boots with: 1) new hard drive connected externally (won't work if it's internal), and 2) my hard drive internally
but my computer boots with: 1) new hard drive connected externally AND internally, and 2) my hard drive internally.
Both hard drives have OS X 10.9.4 installed
If anyone has any idea what's causing this and how to make his computer work with the new hard drive internally that would be greatly appreciated.

So after switching the internal SATA cables from each computer, now we have
His computer, with my SATA cable:
1) Worked with every hard drive!
My computer, with his SATA cable:
1) Works with 1 TB Toshiba hard drive
2) Works with 500 GB Seagate hard drive
3) Works with my original hard drive
4) Flashing folder with question mark with his old hard drive
So it turns out you were right! Definitely had something to do with the SATA cables. But it's still strange that mine was able to boot with all the hard drives except the one that was originally in his. So it seems like it was some combination of his SATA cable and something else, since when his SATA cable was in his computer only 1 hard drive (my original) worked, and when it was in my computer, 3 hard drives worked. But at least its working, and I'm just gonna keep our SATA cables switched since that seems to work out fine

Why wont my macbook pro boot with external hard drives connected?

After two years of uninterrupted success running my MBP with five external hard drives attached (two USB, two eSATA with LaCie Expresscard 34, one FireWire 800), my MacBook Pro with Mountain Lion 10.8.2 installed will not boot with the drives attached. Starting up with the option key depressed does not work. Anyone have insight? This didn't happen until I upgraded to 10.8.2, so is there a bug fix needed in that update?

Update, I reset the PRAM (i think) and now the chime is back as I start up... small win but thats all it does.
So I decided to dload a copy of Lion and burn to a disc, then try and boot from there. When i boot holding option and select the dvd it sounds like something is happening, contstant turning or reading of the disk, but nothing is happening on screen, just my old friend the apple logo and his mate the spinning wheel. Starting to concede now, just hoping to get my data back, its mostly photos and some files i cant duplicate.
I am going to purchase Mountain lion on my current apple ID using a friends macbook and try and reinstall from there. Although i never had Mountain Lion installed in the first place (just lion) there isnt an option to buy lion on the app store (i dont think) This is prob my last spin of the dice i think before handing it in, unless anyone on here has some ideas....

Will not boot with new hard drive

I used a SATA drive with adaptor as a boot drive in an MDD for most of the past year. I just got a MacPro 5,1 and wanted to use this SATA drive as a data drive in the new computer. I pulled it out of the MDD and put it in the MacPro. On start up I get the message You need to hold the power button or press restart. Since it has a boot volume I thought this might be a problem. I held down the Option key during start up to select a boot drive. Here it shows both the this drive and the OEM MacPro drive. Which ever I select I still get the error message. I can put this back in the MDD and get the same error even though it shows up as a boot volume when holding the Option Key. This drive does not seem to be totally dead since it can be seen during start up but it wont let the computer finish booting. It gets to the Apple logo but no farther. Can I salvage this drive? Data on it is unimportant.

You really need to use FW case; reformat the drive to use GPT partition table.
When booting the system's EFI polls all drives to look for valid system paths and to see which is blessed. A corrupt directory can even prevent booting from any drive or DVD.
I tell G5 owners to reformat as soon as possible once data is recovered, even though if they were running 10.5.8 their SATA drive may be okay.
Nuke the drive one way or another, I'd assume you have a spare FW case. And try booting from OS X DVD - you can install a fresh OS as backup/emergency system drive.
Any new SATA II or III drive are fine, WD Black are popular and 640 $69 or 1TB $89.
Have fun, I went from G4 MDD to Mac Pro over 4 yrs ago and it is still running strong -- and quiet!

IMac taking long time to boot after new hard drive installed. Help?

I recently had a new hard drive installed on my iMac (running Snow Leopard). After the intall all was well, but I couldn't get my screensaver to work. Erroneously thinking it was missing, I reinstalled it and ended up with two screen saver folders in the system files. Now when I turn on the Mac, I get a white screen for several seconds (close to a minute) before the system shows me the Apple logo and then boots. I'm concerned about this. Did my copying the screen saver cause the problem? Should I reinstall my system software? I was planning to upgrade to Mountain Lion anyway. Will that fix the problem? Any suggestions appreciated.

Restart in Safe Boot Mode (hold the left Shift key as soon as you restart your computer and hold it until the Apple logo appears). Once it gets to the desktop you can restart normally. Safe Mode serves a number of purposes and one of them is to delete/trim temporary files that might be causing boot problems. There's no guarantee this will improve your startup time but it will do no harm and I have seen computers restart more quickly after a Safe Boot.

Help - How to install Win XP in dual boot with Win 7 (first installed)?

Hi everybody!
I'm having some difficult in install a win xp in dual boot with win 7 (which came with the G550 notebook).
I modified the D: (Lenovo) partition to a primary partition to install the XP. Also I installed the EasyBCD to manange the boots and both S.O. load fine.
The problem is that Win XP is seeing a partition (the first partition on disk) with 200MB that is hidden for Win 7 ! So this partition takes the C: letter in XP and mess all the configuration once that many programs uses the C: as a default letter.
The disk is divided in (aprox):
200 MB hidden partition (from factory)
160GB with Win 7 installed
40GB with Win XP installed
19GB hidden partition (Recovery - from factory)
Is anyone has some idea who to solve this problem or make install XP from the beginning without problems?
Thank a lot!

jay4baps wrote:
Are you sure VMWare Fusion 6 is Launched??? give me link then i download it...
It's version 3.1

[SOLVED] Dual boot with ubuntu w/o installing GRUB? (YES)

Hi all -
This is my first shot at arch, tho I've installed a few other linux distros.
So far I really appreciate the excellent documentation, especially compared to other linuxes!
But I can't find a good answer to this question:
I already have ubuntu installed and would like to dual-boot with arch. (I also have Win7 but boot it from a separate disk selected via BIOS, and usually leave this disk disconnected anyway, so it's not an issue; grub doesn't know it exists).
Q: Before installing, can I make a new LOGICAL ext4 partition (say /dev/sda7),
- then install arch on that **w/o installing grub** and **without messing with the MBR**,
- then edit ubuntu's existing menu.lst to add arch to the boot options?
Current $ fdisk -l
/dev/sda1 ext4 primary/boot (/ for ubuntu)
/dev/sda2 extended
--/dev/sda6 linux-swap
--/dev/sda5 NTFS (data - mp3s, etc)
unallocated 480GB --> Create new ext4 partition /dev/sda7, (logical or primary? Prefer logical)
Current menu.lst entry that I normally boot:
title Ubuntu 12.04 LTS, kernel 3.2.0-24-generic REGULAR
uuid UUIDforSDA1 (file has actual UUID number...)
kernel /boot/vmlinuz-3.2.0-24-generic root=UUID=UUIDforSDA1 ro
initrd /boot/initrd.img-3.2.0-24-generic
and add something like this to menu.lst:
title Arch Linux
uuid UUIDforSDA7
kernel /boot/vmlinuz-linux root=/dev/sda7/ARCH ro (??? - from example in arch docs)
initrd /boot/initramfs-linux.img
or
kernel /boot/vmlinuz-linux root=UUID=UUIDforSDA7 ro (??? - like the ubuntu entry)
I'd really like to NOT mess up booting ubuntu! (Another option might be install arch to a separate disk with the ubuntu disk disconnected, then copy the whole install over via a USB adapter...I've done worse!)
TIA for any help!
Edit: so I guess there's three questions:
1 - Can I install arch w/o installing grub & MBR messing-wth?
2 - What's the correct syntax for menu.lst to access and boot arch?
3 - Will this work?
Last edited by Flemur (2012-05-25 15:24:18)

Well, it worked and booted up first time - no grub install.
The main hassle was merely creating a new ext4 partitions because "Partition Wizard" boot CD screwed up and I kept getting "Unable to update kernel until reboot" messages until I deleted and rebuilt all the partitions in the extended partition with puppy linux & gparted instead of Partition Wizard.
In case others stumble upon this trhread, here's some info:
The entry in the ubuntu (original) menu.lst was this:
title Arch Linux
uuid af7...etc...9f3c
kernel /boot/vmlinuz-linux root=UUID=af7...etc.f3c ro
initrd /boot/initramfs-linux.img
I'm even posting this from arch/fluxbox/Firefox, although getting X set up with nvidia (PITA!) apparently required using a different pacman source:
File "mirrorlist" now points to
Server = http://mirror.us.leaseweb.net/archlinux/$repo/os/$arch
which wasn't in the original file.
Then
$ pacman -Su --> "/etc/mtab exists" --> delete it and something else broke,
so
$ pacman -Su --force --> worked fine (against official advice)
Also: needed to install nvidia-utils and xorg-xinit
Thanks again!

No boot with mini pcie card installed

I have a wind PC and I am trying to install a mini-pcie video decoder into it. I installed the card and the system will not boot. Take the card out, boots up fine. Thought maybe a bios update would do it. Flashed the bios, boots fine without the card, no boot with the card. Am I missing something?

Quote from: sjay on 13-April-11, 04:32:46
There are plenty of things you can do with it, it can be an HTPC, a server, a mobile work platform.
After all, it is a Computer and there are plenty of people in the world who don't even have clean water or food at all.
I'm sure you can find a use for it, perhaps gifting it to someone who isn't as well off as you.
You'd be surprised how good it feels to make someone who is less fortunate really happy.
I've given away many PCs, and I'm far from wealthy! When people I know buy new PCs I take their old ones off their hands, upgrade them, clean them up and give them away to people who can't afford one. I've given away a few on mine too. Just last week I donated my old laptop to a woman who is fighting cancer.
This machine was going to be a high def HTPC, that's not going to happen. Since I can't afford anything else I am a bit bummed out. Working three jobs to pay the bills, I just wanted to do something nice for me for a change. Once in a while I even grab an old PC from work and redo it for someone. Some of our wealthier customers just leave their old PCs with us when they pick up their new ones.

Computer won't boot with PCI-GPIB card installed

I'm running a windows XP system with Labview 7.1 installed. I have installed the GPIB drivers, but when I insert my PCI-GPIB card, the computer will not boot(it freezes before the POST). I'm running a Shuttle "MK40VN" KM400 Chipset Motherboard.

Well, nevermind, I just verified that the card is in fact fried.

Failure to boot after new hard drive install

trying to resurrect old graphite 466mh firewire clamshell.
It was running tiger fine, had a problem charging it so sat in basement for a year. Turns out it was powercord,replaced, and now working again. Decided to replace the 10G hard drive, using the fixit site manual. Installed a Toshiba 80G drive, am now unable to boot from tiger cd's (not dvd) while holding down c-key. Any suggestions? By the way, have access to other firewire iBook running tiger but don't know how to boot from that. Any help much appreciated!

The reason for not being able to start
via 'C' on you new drive may be because it is
assigned (jumpered) incorrectly as the 'Slave' rather
than the 'Master'.
Of course! it seems so obvious now
you've said it.
Actually it's almost
certainly best that this gets done sooner rather than
later or it is complicate any future trouble
shooting
kind regards
mrtotes
OK gentlemen (thanks for responding). So I hook up the 2 iBooks, put the tiger cd in my wife's iBook and start them up. On the screen of the ibook I'm trying to resurrect my wife's desktop appears. I go into disk utility, it scans the systems and the only icons that appear are my wife's hard drive and the new (untitled) hard drive. No sign of the tiger installation cd. I can restore my wife's hard disk onto the untitled drive and end up with a working system. I know little about slaves and masters (I don't get out much)- how do I assign the new drive?
thanks again,
marc

Can't boot from IDE hard drives

Just purchased a barebones system with a KEN NEO Platinum board running an AMD 64 3400+. Tried to install old Maxtor hard drive (40 gb) into new system and a blue screen pops up for less than one second and reboots PC. I can’t read the blue screen but I believe it is saying there is a hardware conflict.
What is causing this. The CMOS recognizes the HD but it can't boot from it. I’ve got two of these units and both have the same problems. I put the drive back into the original PC and it works fine.
Need help desperately.

When I connect the cables, they show which is the slave and which is the master. In the CMOS, everything looks fine. I've noticed alot of people are having difficulty installing used and new hard drives. I've been working with PC's for quite a while and I've never had this much trouble. I was hoping there was something I missed in the CMOS settings.

Dual Booting with second hard drive

Okay so I just ordered an enclosure to replace my optical drive with my old HDD. I have already put an SSD where the old HDD was and I could really use some more storage space for video projects. Also, I want to dual boot Ubuntu on this machine. I am wondering what the best way to go about that would be for performance. Should I make a scond partition on the SSD or use the HDD that I am putting in the optical drive bay for Ubuntu? And how can I use the extra HDD space to store data from both operating systems? Any help is greatly appreciated.

It seems that I have run into a problem. After doing a little more reading, it looks like mavericks will not allow me to dual boot. Also, a clarification to an earlier post I do NOT want to run virtual machine. Could I get around this problem by doing what you, LowLuster, suggested at first. Putting Ubuntu on the second drive by replacing the disk drive and installing that way, then putting bot drives into the machine? Also, the hard drive I am putting in place of the disk drive is 750Gb. I do not need 750Gb of space for Ubuntu. Is there a way to use the rest of that hard drive as storage for Mac OS?

SATA boot with IDE hard dr. installed

Similar Messages

Maybe you are looking for