SATA driver flooding System.log, filling up startup disk

My system.log seems to be filling up with SATA error messages, about 10 per second. The log is now so large that I can't even get the Console app to open it (only in Open Quick, which seems to show little snippets of the log only).
This seems to have started when I installed an Initio 1623 SATA controller as part of a GraniteDigital drive upgrade. The controller worked, the drives worked. I've since pulled the controller card, but it seems the driver continues to flood the log file!
The drivers for the controller are apparently built in to OSX (at least in 10.4.7...) so there is no way to update the driver separately.
Restarting the machine hasn't helped. For now, I have to keep moving files to other disks to keep this G5 functioning.
How can I A) delete the log file to gain some time?
B) make this error stop?
Thanks.

Well - maybe it isn't a SATA driver system.log. I can't read the system.log because it keeps refreshing so the data in on the screen for less than a second before it refreshes. AND there is so much disk thashing that the system is barely responsive.
The only visible log entries are:
Jul 19 04:28:10 Platinum kernel[0]: Inic1622: SATA - Int no command active (repeated about ten times)
Jul 19 04:28:10 Platinum kernel[0]: and active
and repeat....
The log file is showing a size of 4.5 GB

Similar Messages

System.log fills up with uninstall_folder_path no 0

My system.log fills up with the following text:
Apr 10 22:09:48 Macken DelMonitor[60]: hokan
Apr 10 22:09:48 Macken DelMonitor[60]: uninstall_path no 0
Apr 10 22:09:48 Macken DelMonitor[60]: uninstall_folder_path no 0
Apr 10 22:09:50 Macken DelMonitor[60]: install_path yes
These four lines adds every other second, and just fills upp the system.log.
I habe tried to google but can not find any clues to what this is and how to make it stop!
Anyone have any suggestions?
I have a Mac Book Pro with verson 10.7.3
Regards,
Hokan

It's some third-party software that you installed, but I can't be more specific. If you can't figure it out any other way, you'll just have to start uninstalling things until the log messages stop.

System.log fills up with bad packets errors (Multicast packet - CRC error)

Hello,
I've been trying to Google my problem but found no answers; hopefully someone can help me?
Whenever I'm online, my System.logs fills up (every second, and sometimes, multiple times each second) with the following message :
19/12/07 12:51:01 PM kernel AppleYukon2 - bad packet received. length: 60, packet status bits: Multicast packet, CRC error
19/12/07 12:51:01 PM kernel AppleYukon2 - bad packet received. length: 60, packet status bits: Multicast packet, CRC error
My DSL modem is connect directly into my iMac. It's a Speedstream 5360). I never have any problems connecting to the Internet and the speed I get is fine. When I configured my Network settings, I only added my PPPoE Service name username and âssword - everything else was automatically added (Ethernet configuration).
Is there anything I should change in the Advanced Settings?
The System.log causes me problem because it often causes the application Console to crash when I try to view it.

I should add that this problem didn't exist when I was using Tiger.
Also, when I called Apple Tech Support, I was simply told "just don't play with the Console".

USB flash drive not being recognized as a startup disk?

Hi everyone, I've been searching for similar questions but haven't found one that exactly matches my experience. So, I'm going to try and explain my issue in hopes that others may be able to help.
I'm trying to create a bootable flash drive from which I can install lion, and eventually Mountain Lion when it is released onto my main hard drive. My main reason for doing this is to have a way that I can perform a clean install of the operating system. Yes, I know I am old fashioned, but sometimes I prefer clean operating system installs rather than upgrading. In any case, I have downloaded the lion setup file from the Mac app store (Install Mac OS X Lion.app) and am following the directions given on this page to do this procedure. These directions are consistent with directions found on various other sources online. Having this file saved to my hard drive, I was able to find and extract the disk image file from the package InstallESD.dmg to another folder. Once extracted, I plugged in my flash drive and attempted to use disk utility to restore the disk image to my flash drive. I selected the dmg file as my source and the flash drive as the destination. I then clicked restore and was warned that all data on the flash drive would be erased while the disk image was restored to my flash drive. I was prepared for this, so I allowed the process to continue, and it appeared to proceed with no problem. When disk utility was finished, I did a quick look at my flash drive using finder and confirmed that it did in fact appear to contain a disk image of the .dmg file. Here's where things get interesting however.
When I go to system preferences and choose startup disk, my flash drive is not listed as an optional disk from which to boot, only my hard drive ("macintosh HD"). When I restart and hold down the option key, my flash drive is not listed as a startup disk either. I know that the non-intel based macs are not capable of booting from USB, but this is certainly not my issue as I have an intel macbook pro, mid 2009 model. My flash drive is about 4 or 5 years old; it is a PNY Technologies Attaché 16 gb flash drive. I have no trouble viewing and transferring files to and from the flash drive, the only issue is that my computer seems to refuse to recognize it as a startup disk. Are there certain flash drives which do not support booting? This would normally seem more like a computer issue rather than a flash drive issue, but most people seem to have no problem doing what I'm trying to do. Unfortunately I do not have another flash drive with which to test this, and I didn't really feel like buying another flash drive just to test this out if in fact this is not a flash drive issue. I am planning to upgrade to the macbook pro retina soon which of course does not have an optical drive, which is one of the reasons I would like to get this working. Can anyone think of something else I can try? Is it more likely an issue with the macbook pro or the flash drive?
Thanks in advance for any thoughts.

The format says Mac OS Extended. All of the settings were set during the disk image restore process. Even if I format the flash drive as extended journaled or some other format, all of these settings are reverted when I do the restore from the disk image. I will just copy all of the information that disk utility has so that you can see it.
Mount Point : /Volumes/Mac OS X Install ESD Capacity : 16.11 GB (16,106,110,976 Bytes) Format : Mac OS Extended Available : 12.3 GB (12,303,499,264 Bytes) Owners Enabled : Yes Used : 3.8 GB (3,802,611,712 Bytes) Number of Folders : 128 Number of Files : 876

He system software on this startup disk only functions on the original media

i welcom.ith a warning ofantheer on my g4 when my frieend told it to boot os 9.2 after boot thee first disk wasnt finished loading now the g4 wont boot it goes to the system the system software mon this startup disk only functions on the original media not if copied to another drive. Has a restart tab but at this point it has frozen and the mouse and keyboard do not functiuon. NEED HELP

Did this machine work before you tried to install 9.2?
you may not have the correct cd. i think you need the restore cd that came with the machine.
Where did you get the cd? black or grey?
We need your exact machine.
Query by serial number
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
>i welcom.ith a warning ofantheer on my g4
>when my frieend told it to boot os 9.2
why?
does the cd boot into the software installation process?
Where you able to pick what disk to install onto?
>after boot thee first disk wasnt finished loading
Could be a damaged disc. How long did you wait?
>now the g4 wont boot
We understand this line.
>it goes to the system the system software mon
Don't understand this. What appears on the screen?
>this startup disk only functions on the original media not if copied to another drive.
& your point is? You need to use the installation software to install. You cannot copy the cd.
>Has a restart tab but at this point it has frozen and the mouse and keyboard do not functiuon.
I don't understand this. Can you take a picture & post here.
>NEED HELP
Don't we all.
You are allow to edit your posts for 15 minutes. The edit is to the upper right in a sidebar.
Plese spell check the document before posting.

Macintosh HD boot drive doesn't show up as Startup Disk (but boots fine)?!?

Hi,
My main internal bootable disk (Macintosh HD) does not show up in Systems Preferences > Startup Disk. If I want to boot from it, I have to either hold down the "Option" key at startup (and the disk appears fine, so I select it), or I have to wait for the machine to explore all other boot options before it finally resorts to booting from the internal Macintosh HD.
I cannot simply select "Macintosh HD" from the Startup Disk preference pane.
I have already tried repairing permissions, and I did a "Verify" in Disk Utility - everything checks out fine.
I even replaced the StartupDisk.prefpane file from another disk, but no improvement.
How can I get my hard drive to show up in the "Startup Disk" preferences?
(I should mention that this is a new hard drive that I just installed by cloning it from another bootable drive). The other bootable drive shows up fine in the Startup Disk prefs.
Help would be greatly appreciated!

The Partition Map Scheme is currently set to "Master Boot Record."
What does this mean?
That's normally used for Windows.
Do I need to change it to GUID?
Yes.
How do I do that?
You have to re-partition the drive, which means it will erase everything on the drive.
Boot from the Leopard install DVD (hold "C" while booting), choose you language, then select Disk Utility from the "Utilities" menu. Select the drive (at the left, not the volume indented below it), and click the "Partition" tab. Set "Volume Scheme" to "1 Partition", then click the "Options" button. Select "GUID Partition Table", then click "OK". Enter a volume name, set "Format" to "Mac OS Extended (Journaled" and click "Apply".

Flash CS3 flooding system.log

Hi there,
is there any reason Flash CS3 is flooding my system.log? I'm
on Mac OS X.5 ( 10.5 Leopard ). After an 8 hour workday, my logfile
is usualy around 800megs to 1Gbyte in size and it's full with stuff
like this:
May 13 14:00:57 iMac
[0x0-0x45045].com.adobe.flash-9.0-en_us[1244]: Key Value Pair: pos
= 2080
May 13 14:00:57 iMac
[0x0-0x45045].com.adobe.flash-9.0-en_us[1244]: got type name:
Number
May 13 14:00:57 iMac
[0x0-0x45045].com.adobe.flash-9.0-en_us[1244]: var LOG10E:Number
May 13 14:00:57 iMac
[0x0-0x45045].com.adobe.flash-9.0-en_us[1244]: addFunction
May 13 14:00:57 iMac
[0x0-0x45045].com.adobe.flash-9.0-en_us[1244]: metadata name =
__go_to_definition_help
May 13 14:00:57 iMac
[0x0-0x45045].com.adobe.flash-9.0-en_us[1244]: Key Value Pair: file
=
E:\flashfarm\depot\main\player\branches\FlashPlayer\FlashPlayer9_DotReleases\avmplus\core \Math.as
Any chance I can disable this?
thank you! :)

Well - maybe it isn't a SATA driver system.log. I can't read the system.log because it keeps refreshing so the data in on the screen for less than a second before it refreshes. AND there is so much disk thashing that the system is barely responsive.
The only visible log entries are:
Jul 19 04:28:10 Platinum kernel[0]: Inic1622: SATA - Int no command active (repeated about ten times)
Jul 19 04:28:10 Platinum kernel[0]: and active
and repeat....
The log file is showing a size of 4.5 GB

System.log filling with error messages

After SL update my system.log if filling with error messages.
Does any process delete the system.log periodically?
What's causing this error? Getting thousands of them.
9/30/09 12:08:13 PM [0x0-0x12012].com.nowsoftware.nowxagent[181] at now.swing.NProgressBar.fixAppleAnimationBug(null:-1)

JHF45 wrote:
After SL update my system.log if filling with error messages.
Does any process delete the system.log periodically?
Yes. There are three automatic jobs that run daily, weekly, and monthly doing this sort of thing. They run in the early hours of the morning if your Mac is awake, or shortly after it wakes up if it was sleeping. In Leopard, if it was powered-off, they won't run; I don't know if it's the same in Snow.

System.log filling up with enqueueData rtn message

I'm seeing the following log entry in system.log 7-9 times a second:
Oct 22 11:00:00 pbair-paulywalnutz-com kernel[0]: ttyioss9000003: enqueueData rtn (e00002d8)
I've tried googling and checked discussions here but can't find anything that seems to be related.
I don't think it's affecting my PB all that much but it is definitely not right and I would like to fix it.
Please let me know any information I might post that would help diagnose, etc...
Thanks,
Paul

I contacted technical support for Software-Systeme (what the company is not called Bresink as I posted earlier).
They replied promptly with what seems to be the answer…
Hardware Monitor Support wrote:
The error message indicates that you have configured Hardware Monitor
to send its current readings to an external LCD display box. However,
this box appears to have a technical problem or you have no such device
connected. To switch this off, open "Preferences > LCD Module", select
the USB device and set "Configure for display type" to "No display".
This works for me and stops the logs filling with the messages. I'm not sure when I set the LCD display settings, but I imagine it was when I was learning what the settings do.
Just select the items in the top 'lcd module settings' table and set them to no display.
Drew

System.log filling up with: mbp kernel[0]: dp events: 0x04

Dec 21 17:09:52 mbp kernel[0]: dp events: 0x04
This line seems to repeat 5 or 6 times per minute, filling system.log.
Looks like it started Dec 19th. I don't see any obvious unusual thing I did at that time.
Any ideas?
Thanks, jeff

Although Apple has not fixed this yet, I have learned some interesting things. While on the phone with Apple, they had me run a Data Capture program to collect info about my system to send back to them.
While running the application, I had Console open so I could look at the system log. To my surprise, after running this application, the repeating dp events: 0x04 completely stopped and the mouse cursor behaved normally. The mouse continued to behave normally until I put the computer to sleep and woke it up again.
In summary:
1) The dp events: 0x04 messages are present when the mouse skips and not present when it doesn't. This seems like proof that the muliple writes to the system log are what make the cursor skip.
2) Running Capture Data.app (from the Apple tech) runs a handful of scripts that not only capture data, but also kills the dp events for some reason.
I have verified this four different times and reported my findings to the Apple tech I was speaking to.
Can anyone else who receive the data capture program from Apple give this a shot? Just have Console open and look at your system log before, during, and after running the program. Perhaps you'll see as I did that the dp events go away and your mouse works right (at least until sleep).

System.log fills up with mDNSResponder[17]

My system.log will be filled in a 1 second intervall by the following message:
25.12.07 17:58:25 mDNSResponder[17] Failed to obtain NAT port mapping from router 192.168.0.1 external address 0.0.0.0 internal port 22 (ports are different).
Does any body have an idea what I have wrong configured. I'm using a router DGL-4300.
reagrds
wholler

Sure. This is what I gleaned from a mere 2 seconds with the Berkley packet monitor. I don't know if it is very usable, but at least you can see how bad my router was getting spammed:
Start Time: 23:27:16
Last Hit: 23:27:16
Protocol: ICMP
Source IP: 192.168.0.1
Source Port: 0
Destination IP: 192.168.0.145
Destination Port: 0
Byte count: 48
Raw Data:
E(I0''
Start Time: 23:27:16
Last Hit: 23:27:16
Protocol: ICMP
Source IP: 192.168.0.1
Source Port: 0
Destination IP: 192.168.0.145
Destination Port: 0
Byte count: 48
Raw Data:
E(K<'
Start Time: 23:27:16
Last Hit: 23:27:16
Protocol: TCP
Source IP: 192.168.0.1
Source Port: 4444
Destination IP: 192.168.0.145
Destination Port: 49773
Byte count: 396
Raw Data:
HTTP/1.1 200 OK
SERVER: ipOS/6.8 UPnP/1.0 IGD/1.0
EXT:
Transfer-Encoding: Chunked
123
<?xml version="1.0"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/en
velope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body
<div class="jive-quote"><u:DeletePortMappingResponse xmlns:u="urn:schemas-upnp-org:service:WANIPCon</div>
nection:1"></u:DeletePortMappingResponse></s:Body></s:Envelope>
0
Start Time: 23:27:16
Last Hit: 23:27:16
Protocol: TCP
Source IP: 192.168.0.1
Source Port: 4444
Destination IP: 192.168.0.145
Destination Port: 49774
Byte count: 390
Raw Data:
HTTP/1.1 200 OK
SERVER: ipOS/6.8 UPnP/1.0 IGD/1.0
EXT:
Transfer-Encoding: Chunked
11d
<?xml version="1.0"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/en
velope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body
<div class="jive-quote"><u:AddPortMappingResponse xmlns:u="urn:schemas-upnp-org:service:WANIPConnec</div>
tion:1"></u:AddPortMappingResponse></s:Body></s:Envelope>
0
Start Time: 23:27:16
Last Hit: 23:27:16
Protocol: ICMP
Source IP: 192.168.0.1
Source Port: 0
Destination IP: 192.168.0.145
Destination Port: 0
Byte count: 48
Raw Data:
E(5A''
Start Time: 23:27:16
Last Hit: 23:27:16
Protocol: UDP
Source IP: 192.168.0.145
Source Port: 5353
Destination IP: 192.168.0.1
Destination Port: 5351
Byte count: 12
Raw Data:
Start Time: 23:27:16
Last Hit: 23:27:16
Protocol: TCP
Source IP: 192.168.0.1
Source Port: 4444
Destination IP: 192.168.0.145
Destination Port: 49776
Byte count: 390
Raw Data:
HTTP/1.1 200 OK
SERVER: ipOS/6.8 UPnP/1.0 IGD/1.0
EXT:
Transfer-Encoding: Chunked
11d
<?xml version="1.0"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/en
velope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body
<div class="jive-quote"><u:AddPortMappingResponse xmlns:u="urn:schemas-upnp-org:service:WANIPConnec</div>
tion:1"></u:AddPortMappingResponse></s:Body></s:Envelope>
0
Start Time: 23:27:16
Last Hit: 23:27:16
Protocol: ICMP
Source IP: 192.168.0.1
Source Port: 0
Destination IP: 192.168.0.145
Destination Port: 0
Byte count: 48
Raw Data:
E( ''
Start Time: 23:27:16
Last Hit: 23:27:16
Protocol: TCP
Source IP: 192.168.0.1
Source Port: 4444
Destination IP: 192.168.0.145
Destination Port: 49778
Byte count: 385
Raw Data:
HTTP/1.1 200 OK
SERVER: ipOS/6.8 UPnP/1.0 IGD/1.0
EXT:
Transfer-Encoding: Chunked
11d
<?xml version="1.0"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/en
velope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body
<div class="jive-quote"><u:AddPortMappingResponse xmlns:u="urn:schemas-upnp-org:service:WANIPConnec</div>
tion:1"></u:AddPortMappingResponse></s:Body></s:Envelope>
Start Time: 23:27:16
Last Hit: 23:27:16
Protocol: UDP
Source IP: 192.168.0.145
Source Port: 5353
Destination IP: 192.168.0.1
Destination Port: 5351
Byte count: 12
Raw Data:
Start Time: 23:27:16
Last Hit: 23:27:16
Protocol: ICMP
Source IP: 192.168.0.1
Source Port: 0
Destination IP: 192.168.0.145
Destination Port: 0
Byte count: 48
Raw Data:
E(''
Start Time: 23:27:16
Last Hit: 23:27:16
Protocol: TCP
Source IP: 192.168.0.1
Source Port: 4444
Destination IP: 192.168.0.145
Destination Port: 49780
Byte count: 385
Raw Data:
HTTP/1.1 200 OK
SERVER: ipOS/6.8 UPnP/1.0 IGD/1.0
EXT:
Transfer-Encoding: Chunked
11d
<?xml version="1.0"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/en
velope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body
<div class="jive-quote"><u:AddPortMappingResponse xmlns:u="urn:schemas-upnp-org:service:WANIPConnec</div>
tion:1"></u:AddPortMappingResponse></s:Body></s:Envelope>
Start Time: 23:27:16
Last Hit: 23:27:16
Protocol: TCP
Source IP: 192.168.0.1
Source Port: 4444
Destination IP: 192.168.0.145
Destination Port: 49779
Byte count: 98
Raw Data:
HTTP/1.1 200 OK
SERVER: ipOS/6.8 UPnP/1.0 IGD/1.0
EXT:
Transfer-Encoding: Chunked
0
Start Time: 23:27:16
Last Hit: 23:27:16
Protocol: UDP
Source IP: 192.168.0.145
Source Port: 5353
Destination IP: 192.168.0.1
Destination Port: 5351
Byte count: 12
Raw Data:
Start Time: 23:27:16
Last Hit: 23:27:16
Protocol: TCP
Source IP: 192.168.0.145
Source Port: 49781
Destination IP: 192.168.0.1
Destination Port: 4444
Byte count: 919
Raw Data:
4CPOST /wipconn HTTP/1.1
Content-Type: text/xml; charset="utf-8"
SOAPAction: "urn:schemas-upnp-org:service:WANIPConnection:1#DeletePortMappin
g"
User-Agent: Mozilla/4.0 (compatible; UPnP/1.0; Windows 9x)
Host: 192.168.0.1:4444
Content-Length: 604
Connection: close
Pragma: no-cache
<?xml version="1.0"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/
" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><SOAP-E
NV:Body><m:DeletePortMapping xmlns:m="urn:schemas-upnp-org:service:WANIPConn
ection:1"><NewRemoteHost xmlns:dt="urn:schemas-microsoft-com:datatypes" dt:d
t="string"></NewRemoteHost><NewExternalPort xmlns:dt="urn:schemas-microsoft-
com:datatypes" dt:dt="ui2">9999</NewExternalPort><NewProtocol xmlns:dt="urn:
schemas-microsoft-com:datatypes" dt:dt="string">TCP</NewProtocol></m:DeleteP
ortMapping></SOAP-ENV:Body></SOAP-ENV:Envelope>
Start Time: 23:27:16
Last Hit: 23:27:16
Protocol: UDP
Source IP: 192.168.0.145
Source Port: 5353
Destination IP: 192.168.0.1
Destination Port: 5351
Byte count: 12
Raw Data:
Start Time: 23:27:16
Last Hit: 23:27:16
Protocol: ICMP
Source IP: 192.168.0.1
Source Port: 0
Destination IP: 192.168.0.145
Destination Port: 0
Byte count: 48
Raw Data:
E(#''
Start Time: 23:27:16
Last Hit: 23:27:16
Protocol: TCP
Source IP: 192.168.0.145
Source Port: 49784
Destination IP: 192.168.0.1
Destination Port: 4444
Byte count: 1432
Raw Data:
4EPOST /wipconn HTTP/1.1
Content-Type: text/xml; charset="utf-8"
SOAPAction: "urn:schemas-upnp-org:service:WANIPConnection:1#AddPortMapping"
User-Agent: Mozilla/4.0 (compatible; UPnP/1.0; Windows 9x)
Host: 192.168.0.1:4444
Content-Length: 1119
Connection: close
Pragma: no-cache
<?xml version="1.0"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/
" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><SOAP-E
NV:Body><m:AddPortMapping xmlns:m="urn:schemas-upnp-org:service:WANIPConnect
ion:1"><NewRemoteHost xmlns:dt="urn:schemas-microsoft-com:datatypes" dt:dt="
string"></NewRemoteHost><NewExternalPort xmlns:dt="urn:schemas-microsoft-com
:datatypes" dt:dt="ui2">9999</NewExternalPort><NewProtocol xmlns:dt="urn:sch
emas-microsoft-com:datatypes" dt:dt="string">TCP</NewProtocol><NewInternalPo
rt xmlns:dt="urn:schemas-microsoft-com:datatypes" dt:dt="ui2">9999</NewInter
nalPort><NewInternalClient xmlns:dt="urn:schemas-microsoft-com:datatypes" dt
:dt="string">192.168.0.145</NewInternalClient><NewEnabled xmlns:dt="urn:sche
mas-microsoft-com:datatypes" dt:dt="boolean">1</NewEnabled><NewPortMappingDe
scription xmlns:dt="urn:schemas-microsoft-com:datatypes" dt:dt="string">iC99
99</NewPortMappingDescription><NewLeaseDuration xmlns:dt="urn:schemas-micros
oft-com:datatypes" dt:dt="ui4">0</NewLeaseDuration></m:AddPortMapping></SOAP
-ENV:Body></SOAP-ENV:Envelope>
Start Time: 23:27:16
Last Hit: 23:27:16
Protocol: TCP
Source IP: 192.168.0.1
Source Port: 4444
Destination IP: 192.168.0.145
Destination Port: 49784
Byte count: 385
Raw Data:
HTTP/1.1 200 OK
SERVER: ipOS/6.8 UPnP/1.0 IGD/1.0
EXT:
Transfer-Encoding: Chunked
11d
<?xml version="1.0"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/en
velope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body
<div class="jive-quote"><u:AddPortMappingResponse xmlns:u="urn:schemas-upnp-org:service:WANIPConnec</div>
tion:1"></u:AddPortMappingResponse></s:Body></s:Envelope>
Start Time: 23:27:16
Last Hit: 23:27:16
Protocol: UDP
Source IP: 192.168.0.145
Source Port: 5353
Destination IP: 192.168.0.1
Destination Port: 5351
Byte count: 12
Raw Data:
Start Time: 23:27:16
Last Hit: 23:27:16
Protocol: ICMP
Source IP: 192.168.0.1
Source Port: 0
Destination IP: 192.168.0.145
Destination Port: 0
Byte count: 48
Raw Data:
E(T.''
Start Time: 23:27:16
Last Hit: 23:27:16
Protocol: ICMP
Source IP: 192.168.0.1
Source Port: 0
Destination IP: 192.168.0.145
Destination Port: 0
Byte count: 48
Raw Data:
E(1''
Start Time: 23:27:16
Last Hit: 23:27:16
Protocol: TCP
Source IP: 192.168.0.1
Source Port: 4444
Destination IP: 192.168.0.145
Destination Port: 49785
Byte count: 396
Raw Data:
HTTP/1.1 200 OK
SERVER: ipOS/6.8 UPnP/1.0 IGD/1.0
EXT:
Transfer-Encoding: Chunked
123
<?xml version="1.0"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/en
velope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body
<div class="jive-quote"><u:DeletePortMappingResponse xmlns:u="urn:schemas-upnp-org:service:WANIPCon</div>
nection:1"></u:DeletePortMappingResponse></s:Body></s:Envelope>
0
Start Time: 23:27:16
Last Hit: 23:27:16
Protocol: UDP
Source IP: 192.168.0.145
Source Port: 5353
Destination IP: 192.168.0.1
Destination Port: 5351
Byte count: 12
Raw Data:
Start Time: 23:27:16
Last Hit: 23:27:16
Protocol: ICMP
Source IP: 192.168.0.1
Source Port: 0
Destination IP: 192.168.0.145
Destination Port: 0
Byte count: 48
Raw Data:
E(,''
Start Time: 23:27:16
Last Hit: 23:27:16
Protocol: ICMP
Source IP: 192.168.0.1
Source Port: 0
Destination IP: 192.168.0.145
Destination Port: 0
Byte count: 48
Raw Data:
E(P(z''
Start Time: 23:27:16
Last Hit: 23:27:17
Protocol: TCP
Source IP: 192.168.0.1
Source Port: 4444
Destination IP: 192.168.0.145
Destination Port: 49787
Byte count: 396
Raw Data:
HTTP/1.1 200 OK
SERVER: ipOS/6.8 UPnP/1.0 IGD/1.0
EXT:
Transfer-Encoding: Chunked
123
<?xml version="1.0"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/en
velope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body
<div class="jive-quote"><u:DeletePortMappingResponse xmlns:u="urn:schemas-upnp-org:service:WANIPCon</div>
nection:1"></u:DeletePortMappingResponse></s:Body></s:Envelope>
0
Start Time: 23:27:17
Last Hit: 23:27:17
Protocol: ICMP
Source IP: 192.168.0.1
Source Port: 0
Destination IP: 192.168.0.145
Destination Port: 0
Byte count: 48
Raw Data:
E(7$''
Start Time: 23:27:17
Last Hit: 23:27:17
Protocol: ICMP
Source IP: 192.168.0.1
Source Port: 0
Destination IP: 192.168.0.145
Destination Port: 0
Byte count: 48
Raw Data:
E(|J''
Start Time: 23:27:17
Last Hit: 23:27:17
Protocol: TCP
Source IP: 192.168.0.1
Source Port: 4444
Destination IP: 192.168.0.145
Destination Port: 49789
Byte count: 93
Raw Data:
HTTP/1.1 200 OK
SERVER: ipOS/6.8 UPnP/1.0 IGD/1.0
EXT:
Transfer-Encoding: Chunked
Start Time: 23:27:17
Last Hit: 23:27:17
Protocol: UDP
Source IP: 192.168.0.145
Source Port: 5353
Destination IP: 192.168.0.1
Destination Port: 5351
Byte count: 12
Raw Data:
Start Time: 23:27:17
Last Hit: 23:27:17
Protocol: TCP
Source IP: 192.168.0.1
Source Port: 4444
Destination IP: 192.168.0.145
Destination Port: 49790
Byte count: 390
Raw Data:
HTTP/1.1 200 OK
SERVER: ipOS/6.8 UPnP/1.0 IGD/1.0
EXT:
Transfer-Encoding: Chunked
11d
<?xml version="1.0"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/en
velope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body
<div class="jive-quote"><u:AddPortMappingResponse xmlns:u="urn:schemas-upnp-org:service:WANIPConnec</div>
tion:1"></u:AddPortMappingResponse></s:Body></s:Envelope>
0
Start Time: 23:27:17
Last Hit: 23:27:17
Protocol: ICMP
Source IP: 192.168.0.1
Source Port: 0
Destination IP: 192.168.0.145
Destination Port: 0
Byte count: 48
Raw Data:
E(t''
Start Time: 23:27:17
Last Hit: 23:27:17
Protocol: TCP
Source IP: 192.168.0.145
Source Port: 49791
Destination IP: 192.168.0.1
Destination Port: 4444
Byte count: 919
Raw Data:
4JPOST /wipconn HTTP/1.1
Content-Type: text/xml; charset="utf-8"
SOAPAction: "urn:schemas-upnp-org:service:WANIPConnection:1#DeletePortMappin
g"
User-Agent: Mozilla/4.0 (compatible; UPnP/1.0; Windows 9x)
Host: 192.168.0.1:4444
Content-Length: 604
Connection: close
Pragma: no-cache
<?xml version="1.0"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/
" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><SOAP-E
NV:Body><m:DeletePortMapping xmlns:m="urn:schemas-upnp-org:service:WANIPConn
ection:1"><NewRemoteHost xmlns:dt="urn:schemas-microsoft-com:datatypes" dt:d
t="string"></NewRemoteHost><NewExternalPort xmlns:dt="urn:schemas-microsoft-
com:datatypes" dt:dt="ui2">9999</NewExternalPort><NewProtocol xmlns:dt="urn:
schemas-microsoft-com:datatypes" dt:dt="string">TCP</NewProtocol></m:DeleteP
ortMapping></SOAP-ENV:Body></SOAP-ENV:Envelope>
Start Time: 23:27:17
Last Hit: 23:27:17
Protocol: TCP
Source IP: 192.168.0.1
Source Port: 4444
Destination IP: 192.168.0.145
Destination Port: 49792
Byte count: 390
Raw Data:
HTTP/1.1 200 OK
SERVER: ipOS/6.8 UPnP/1.0 IGD/1.0
EXT:
Transfer-Encoding: Chunked
11d
<?xml version="1.0"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/en
velope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body
<div class="jive-quote"><u:AddPortMappingResponse xmlns:u="urn:schemas-upnp-org:service:WANIPConnec</div>
tion:1"></u:AddPortMappingResponse></s:Body></s:Envelope>
0
Start Time: 23:27:17
Last Hit: 23:27:17
Protocol: TCP
Source IP: 192.168.0.1
Source Port: 4444
Destination IP: 192.168.0.145
Destination Port: 49793
Byte count: 391
Raw Data:
HTTP/1.1 200 OK
SERVER: ipOS/6.8 UPnP/1.0 IGD/1.0
EXT:
Transfer-Encoding: Chunked
123
<?xml version="1.0"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/en
velope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body
<div class="jive-quote"><u:DeletePortMappingResponse xmlns:u="urn:schemas-upnp-org:service:WANIPCon</div>
nection:1"></u:DeletePortMappingResponse></s:Body></s:Envelope>
Start Time: 23:27:17
Last Hit: 23:27:17
Protocol: UDP
Source IP: 192.168.0.145
Source Port: 5353
Destination IP: 192.168.0.1
Destination Port: 5351
Byte count: 12
Raw Data:
Start Time: 23:27:17
Last Hit: 23:27:17
Protocol: TCP
Source IP: 192.168.0.1
Source Port: 4444
Destination IP: 192.168.0.145
Destination Port: 49794
Byte count: 98
Raw Data:
HTTP/1.1 200 OK
SERVER: ipOS/6.8 UPnP/1.0 IGD/1.0
EXT:
Transfer-Encoding: Chunked
0
Start Time: 23:27:17
Last Hit: 23:27:17
Protocol: ICMP
Source IP: 192.168.0.1
Source Port: 0
Destination IP: 192.168.0.145
Destination Port: 0
Byte count: 48
Raw Data:
E(p''
Start Time: 23:27:17
Last Hit: 23:27:17
Protocol: TCP
Source IP: 192.168.0.1
Source Port: 4444
Destination IP: 192.168.0.145
Destination Port: 49796
Byte count: 385
Raw Data:
HTTP/1.1 200 OK
SERVER: ipOS/6.8 UPnP/1.0 IGD/1.0
EXT:
Transfer-Encoding: Chunked
11d
<?xml version="1.0"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/en
velope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body
<div class="jive-quote"><u:AddPortMappingResponse xmlns:u="urn:schemas-upnp-org:service:WANIPConnec</div>
tion:1"></u:AddPortMappingResponse></s:Body></s:Envelope>
Start Time: 23:27:17
Last Hit: 23:27:17
Protocol: UDP
Source IP: 192.168.0.145
Source Port: 5353
Destination IP: 192.168.0.1
Destination Port: 5351
Byte count: 12
Raw Data:
Start Time: 23:27:17
Last Hit: 23:27:17
Protocol: TCP
Source IP: 192.168.0.1
Source Port: 4444
Destination IP: 192.168.0.145
Destination Port: 49797
Byte count: 391
Raw Data:
HTTP/1.1 200 OK
SERVER: ipOS/6.8 UPnP/1.0 IGD/1.0
EXT:
Transfer-Encoding: Chunked
123
<?xml version="1.0"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/en
velope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body
<div class="jive-quote"><u:DeletePortMappingResponse xmlns:u="urn:schemas-upnp-org:service:WANIPCon</div>
nection:1"></u:DeletePortMappingResponse></s:Body></s:Envelope>
Start Time: 23:27:17
Last Hit: 23:27:17
Protocol: UDP
Source IP: 192.168.0.145
Source Port: 5353
Destination IP: 192.168.0.1
Destination Port: 5351
Byte count: 12
Raw Data:
Start Time: 23:27:17
Last Hit: 23:27:17
Protocol: TCP
Source IP: 192.168.0.1
Source Port: 4444
Destination IP: 192.168.0.145
Destination Port: 49798
Byte count: 390
Raw Data:
HTTP/1.1 200 OK
SERVER: ipOS/6.8 UPnP/1.0 IGD/1.0
EXT:
Transfer-Encoding: Chunked
11d
<?xml version="1.0"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/en
velope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body
<div class="jive-quote"><u:AddPortMappingResponse xmlns:u="urn:schemas-upnp-org:service:WANIPConnec</div>
tion:1"></u:AddPortMappingResponse></s:Body></s:Envelope>
0
Start Time: 23:27:17
Last Hit: 23:27:17
Protocol: ICMP
Source IP: 192.168.0.1
Source Port: 0
Destination IP: 192.168.0.145
Destination Port: 0
Byte count: 48
Raw Data:
E( 3''
Start Time: 23:27:17
Last Hit: 23:27:17
Protocol: UDP
Source IP: 192.168.0.145
Source Port: 5353
Destination IP: 192.168.0.1
Destination Port: 5351
Byte count: 12
Raw Data:
Start Time: 23:27:17
Last Hit: 23:27:17
Protocol: TCP
Source IP: 192.168.0.1
Source Port: 4444
Destination IP: 192.168.0.145
Destination Port: 49799
Byte count: 396
Raw Data:
HTTP/1.1 200 OK
SERVER: ipOS/6.8 UPnP/1.0 IGD/1.0
EXT:
Transfer-Encoding: Chunked
123
<?xml version="1.0"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/en
velope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body
<div class="jive-quote"><u:DeletePortMappingResponse xmlns:u="urn:schemas-upnp-org:service:WANIPCon</div>
nection:1"></u:DeletePortMappingResponse></s:Body></s:Envelope>
0
Start Time: 23:27:17
Last Hit: 23:27:17
Protocol: ICMP
Source IP: 192.168.0.1
Source Port: 0
Destination IP: 192.168.0.145
Destination Port: 0
Byte count: 48
Raw Data:
E(#''
Start Time: 23:27:17
Last Hit: 23:27:17
Protocol: UDP
Source IP: 192.168.0.145
Source Port: 5353
Destination IP: 192.168.0.1
Destination Port: 5351
Byte count: 12
Raw Data:
-----------------------------------------------------------------------

System Log Filling Up - Why?

What is causing this to be written to the System log and how do I stop it?
10/31/07 4:15:46 PM com.apple.launchd[1] (com.mozy.backup660) ...
Thanks for any help.

Yes, I used Mozy very briefly, but I deleted the application (I think) and canceled the Mozy account. What I want to know is how do I stop launchd from trying to launch a backup, failing and logging this message.

Hard drive partitions are not showing in Startup DIsk

My hard drive is partitioned into two volumes. HD1 & HD2 (Both 500 MB)
I had Snow Leopard installed on one (HD2) and Mavericks istalled on the other.(HD1)
Both volumes were visible in the Startup Disk option in System Preferences and I could restart from either.
I upgraded the Mavericks istallation to Yosemite - worked OK.
System Disk option showed both HD1 & HD2
Restarted the Mac from HD2 in Snow Leopard mode - no probs.
Then the problem started. I wanted to restart from HD1 in Yosemite mode.
Went in System Preferences to Startup Disk option - HD1 did not show in the window - only HD2 (Snow Leopard) & Network Startup.
Any ideas anyone? (Could be a bug?)

When I restarted using Com+Opt+P+R it went into Yosemite mode with both volumes showing in Startup disk.
Restarting with HD2 (Snow Leopard) gave me the same problem again.

Starting sunstudio without DISPLAY: ide.log fills up the disk

We had a user starting sunstudio from a terminal that didn't have DISPLAY set. I'd expect sunstudio to fail, like in the case when DISPLAY has a non-valid value, but no: The process goes into an infinite loop and the ide.log fills with exeception messages.
I guess this is a bug - but is it a known bug?
A search on sunsolve didn't give any match - except for an old bug where the command did exit silently (see http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4917734).
Regards,
Bernd

I can't reproduce this problem with Sun Studio 12:
$ unset DISPLAY
$ sunstudio
/opt/12/SUNWspro/bin/sunstudio: ERROR: environment variable DISPLAY is not set
So even if there was such a bug, it has been fixed.

System logs filling up ALOT of disk space!

My syslogs are filling up my entire hdd space.
I checked top and it is constantly running at around 25% CPU.
These are the 3 offending logs being written:
everything.log
kernel.log
messages.log
I did a tail -f on all 3 files, and these are repeatedly loop, seems like a kernel issue: -> tail -f output: http://pastebin.com/m43e12d7e
Any idea how I can remedy this?
Thanks!

apparently this is something to do with cx88, which appears to be a tv tuner driver. don't know why it's logging so verbosely though, looks like interrupt requests or something. anyway i guess one thing to do is make sure you have the right options for the card in /etc/modprobe.d/. I think there are some good v4l wikis out there that explain how to do this

SATA driver flooding System.log, filling up startup disk

Similar Messages

Maybe you are looking for