SATA Error message
Need a little help with a cranky SATA drive...
I have a KT4 Ultra with an Athalon XP 1800. Trying to install WinXP Pro on a Hytachi SATA 80 gig drive.
Pop in the CD, hit F6, when prompted, hit S to specify additional driver, pop in the floppy, choose XP, and get the following error message:
' File \winxp\fastx2k.sys caused an unexpected error (18) at line 2108 in d:\xpclient\base\boot\setup\oemdisk.c.'
I'm pretty much clueless on where to go from here. Any help you can provide would be very much appreciated.
1) Yes. Well, I think so. I let it automatically config the array, since I wasn't sure that you could do an array of 1. If there is anything I need to specifically check, please let me know.
2) huh?
3) ok.
Thanks again for your help
Similar Messages
-
Airport Express- No internet connection. I am getting the following error messages- No DNS Server and Double SAT. Can anyone walk me through a fix
Try putting these numbers in Network>TCP/IP>DNS Servers, for the Interface you connect with...
208.67.222.222
208.67.220.220
Then Apply. For 10.5/10.6 Network, highlight Interface>Advanced button>DNS tab>little + icon.
Might also put them in the Airport Express, no idea what Double SAT is!? -
Sat Pro A200 - Error message on startup. code: 0 x 2
I have a Satellite Pro A 200 running Windows XP.
On startup I get an error message " A fatal error has occurred. This program will be terminated. code: 0 x 2 "
I just close the box and continue but I would like to know what is causing this message and how I can stop it.
Can anyone help ?Huh that can be problematic. You can try to remove preinstalled application from the system but if you try to reinstall it I think this will not help at all.
Long time ago I had similar problem. Something was screwed up in the registry and repair was not possible. At the end I have reinstalled WXP recovery image and after doing this with factory settings everything was OK again. -
IPod Restore - Error Message 21
Hi All,
Hope someone can help as this is driving me insane - I've just installed iTunes 9.2.1 but when I went to Sync my iPod I was told I needed to restore it.
Sooo....selected Restore but just as it gets to the end of the Restore process I get an error message (21). Having reviewed the info on this website I've tried everything from switching off Windows Firewall to uninstalling my security software.
When I run Diagnostics, this is what I get - PLEASE can anyone help?!?!
+Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)+
+TOSHIBA Satellite L350D+
+iTunes 9.2.1.5+
+QuickTime 7.6.6+
+FairPlay 1.8.20+
+Apple Application Support 1.3.1+
+iPod Updater Library 9.2d4+
+CD Driver 2.2.0.1+
+CD Driver DLL 2.1.1.1+
+Apple Mobile Device 3.1.0.62+
+Apple Mobile Device Driver 1.49.0.0+
+Bonjour 2.0.2.0 (214.3)+
+iTunes Serial Number 77D7ABF151E33DA6+
+Current user is not an administrator.+
+The current local date and time is 2010-08-06 15:41:25.+
+iTunes is not running in safe mode.+
+WebKit accelerated compositing is enabled.+
+HDCP is not supported.+
+Video Display Information+
+ATI Technologies Inc., ATI Radeon X1250+
+** External Plug-ins Information **+
+No external plug-ins installed.+
+Genius ID: 77997418ba0ddcad18ddf23a6a6fd31a+
+** Network Connectivity Tests **+
+Network Adapter Information+
+Adapter Name: {AF6E733D-F225-4E62-85E6-73B8C8D1BCFB}+
+Description: Realtek RTL8187B Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter+
+IP Address: 192.168.1.2+
+Subnet Mask: 255.255.255.0+
+Default Gateway: 192.168.1.1+
+DHCP Enabled: Yes+
+DHCP Server: 192.168.1.1+
+Lease Obtained: Fri Aug 06 15:15:09 2010+
+Lease Expires: Sat Aug 07 14:21:21 2010+
+DNS Servers: 192.168.1.1+
+ 192.168.1.1+
+Adapter Name: {50701037-1545-4784-9A8B-106F52CA6AA1}+
+Description: Realtek RTL8102E Family PCI-E Fast Ethernet NIC (NDIS 6.0)+
+IP Address: 0.0.0.0+
+Subnet Mask: 0.0.0.0+
+Default Gateway: 0.0.0.0+
+DHCP Enabled: Yes+
+DHCP Server: +
+Lease Obtained: Thu Jan 01 00:00:00 1970+
+Lease Expires: Thu Jan 01 00:00:00 1970+
+DNS Servers: +
+Active Connection: LAN Connection+
+Connected: Yes+
+Online: Yes+
+Using Modem: No+
+Using LAN: Yes+
+Using Proxy: No+
+SSL 3.0 Support: Enabled+
+TLS 1.0 Support: Disabled+
+Firewall Information+
+Windows Firewall is off.+
+Connection attempt to Apple website was successful.+
+Connection attempt to iTunes Store was successful.+
+Secure connection attempt to iTunes Store was successful.+
+Secure connection attempt to iPhone activation server was successful.+
+Last successful store access was 2010-08-06 15:35:33.+
+** CD/DVD Drive Tests **+
+LowerFilters: PxHelp20 (2.0.0.0),+
+UpperFilters: GEARAspiWDM (2.2.0.1),+
+F: HL-DT-ST DVDRAM GSA-T40N, Rev JT03+
+Audio CD in drive.+
+Found 12 songs on CD, playing time 51:04 on Audio CD.+
+Track 1, start time 00:02:00+
+Track 2, start time 05:09:35+
+Track 3, start time 09:08:59+
+Track 4, start time 12:39:49+
+Track 5, start time 16:55:37+
+Track 6, start time 20:48:59+
+Track 7, start time 24:22:19+
+Track 8, start time 27:32:51+
+Track 9, start time 30:57:16+
+Track 10, start time 34:25:00+
+Track 11, start time 38:38:11+
+Track 12, start time 43:06:08+
+Audio CD reading succeeded.+
+Get drive speed succeeded.+
+The drive CDR speeds are: 4 10 16 24.+
+The drive CDRW speeds are: 4.+
+The drive DVDR speeds are: 4.+
+The drive DVDRW speeds are: 4.+
+** Device Connectivity Tests **+
+iPodService 9.2.1.5 is currently running.+
+iTunesHelper 9.2.1.5 is currently running.+
+Apple Mobile Device service 3.1.0.0 is currently running.+
+Universal Serial Bus Controllers:+
+Standard Enhanced PCI to USB Host Controller. Device is working properly.+
+Standard OpenHCD USB Host Controller. Device is working properly.+
+Standard OpenHCD USB Host Controller. Device is working properly.+
+Standard OpenHCD USB Host Controller. Device is working properly.+
+Standard OpenHCD USB Host Controller. Device is working properly.+
+Standard OpenHCD USB Host Controller. Device is working properly.+
+No FireWire (IEEE 1394) Host Controller found.+
+Most Recent Devices Not Currently Connected:+
+iPod touch running firmware version 2.2.1+
+Serial Number: 9E948391203+
+** Device Sync Tests **+
+No iPod, iPhone or iPad found.+Hi,
Did you manage to sort this ? I have now had this error 21 message for days. I have tried everything bar uninstalling itunes and reinstalling it ?
ANy help would be grately appreciated !! -
Error message: this computer is not supported by the system recovery media.
I replaced a bad samasung hard drive in my Pavilion dv6z 3200 with a Seagate Momentus XT 750 GB 7200RPM SATA 6Gb/s 32 MB Cache 2.5 Inch Solid State Hybrid Drive ST750LX003 and when trying to restore Windows 7 64 bit OS get the error message "this computer is not supported by the system recovery media"
Is the new hdd at least as large a capacity as the original? Can be larger capacity, but sometimes smaller will cause error.
Enter BIOS by tapping F10 key. Is all system info intact/complete?
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
As in the title. For a while the headphone jack is occasionally crackly when the jack moves around in the port. It finally died today when I plugged it in and all the audio is heavily distorted and sometimes cuts out completely. Whenever I try to set up a service with Apple I keep getting this error message:
We're sorry, but we are unable to complete your request at this time.
Please try again in a few minutes or start over now.
I can't get through to the Irish support phone number either, it keeps saying number not recognised. Is there any other way I can send my iphone in for service (closest genius bar is 500km away...)http://ww2.cs.fsu.edu/~rosentha/linux/2.6.26.5/docs/DocBook/libata/ch07.html#excatATAbusErr wrote:
ATA bus error means that data corruption occurred during transmission over ATA bus (SATA or PATA). This type of errors can be indicated by
ICRC or ABRT error as described in the section called “ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)”.
Controller-specific error completion with error information indicating transmission error.
On some controllers, command timeout. In this case, there may be a mechanism to determine that the timeout is due to transmission error.
Unknown/random errors, timeouts and all sorts of weirdities.
As described above, transmission errors can cause wide variety of symptoms ranging from device ICRC error to random device lockup, and, for many cases, there is no way to tell if an error condition is due to transmission error or not; therefore, it's necessary to employ some kind of heuristic when dealing with errors and timeouts. For example, encountering repetitive ABRT errors for known supported command is likely to indicate ATA bus error.
Once it's determined that ATA bus errors have possibly occurred, lowering ATA bus transmission speed is one of actions which may alleviate the problem.
I'd also add; make sure you have good backups when ATA errors are frequent -
Why do I get an error message when trying to open PE 8.0 projects with PE9.0?
I am trying to open a project in PE 9.0 that I made with PE 8.0. Each time, and with different projects, I get this error message:
"Projects created with Adobe Premiere Pro and Adobe Premiere Elements are not compatible. Please use apropriate application to open this project."
I have never used Adobe Premiere Pro nor is in installed on my computer! I updated my PE 8.0 with the patch that came out last year.
My Operating System is Windows XP Pro, Service Pack 3, system specs are SATA 2 RAID 1 with dual 1 TB hard drives. 4 GB RAM. I have an Intel Core2 processor Q6600 (2.4 Ghz, 1066 FSB) with Quad Core technology and 8 MB cache, 4 GB DDR2 SDRAM at 800 MHz.
My hard drive has been defragmented and have 779 GB or 83 percent free space.Can you create a test Project in PrE 9 and does that work. If so, close that Project and then Open it again in PrE 9.
It could be as simple as your PrE 8 Projects just not Opening in PrE 9. There is often forward compatibility, but not always. It is usually best to finish Projects in the version, in which they were started.
Good luck,
Hunt -
iTunes regularly post an error message saying it can't save to the internal hard disk because the disk is not attached, even though the disk seems to be functioning normally. Do these error messages indicate that there is a real problem with either iTunes or the disk?
<Subject Edited by Host>1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
0x0000007B error message after installing Portege R500 XP OEM Recovery CD
I have a R500 with 64 GB SSD and Vista preinstalled.
I try to downgrade Vista with a R500 XP Pro OEM Recovery CD.
Decompression to the SSD works fine - but during the first initial XP Pro boot I receive a blue screen with a 0x0000007B error message and some hints regarding virus infection?
What causes this problem?Hi
In my knowledge the R500 supports an SATA HDD controller and you have to include the SATA driver into the Win XP CD using the nLite software.
The SATA driver is a part of the Intel Storage Manager which could be found on the Toshiba European driver page or on the Intel page.
By the way; check this forum and use the search option to find more threads regarding the Intel Storage Manager and how to use the nLite and to include the SATA driver.
Here are enough threads about this theme.
Cheers -
Hp g6-1278sa get blue screen and error message when trying to load xp pro
I have setup a new 500gb toshiba SATA 2 harddrive to run daul boot.
Windows XP pro 32bit and windows 64bit.
Unable to install XP pro, just goes into error and blue screen.
Ive removed the harddrive and placed it in my Packard Bell, loaded XP pro 32bit and win 8 64bit with no problem, and both run fine.
Removed the harddrive from the packard bell laptop and place it back into the HP g6-1278sa, daul boot screen on start up.
Opptions windows 8 or earlyer windows.
Windows 8 works fine.
Windows XP pro starts to load and then we get the blue screen with error message.Hi Powlers
Ok read this tutorial ( link below ) in how to install XP within Windows 8 OR running Virtual Machine
http://www.howtogeek.com/171395/how-to-get-windows-xp-mode-on-windows-8/
OR
http://www.fixedbyvonnie.com/2014/03/legally-install-windows-xp-free-windows-8-using-virtualbox/
Quick question :: What operating system was your machine shipped with initially ??? Windows 7 ???
Checkurtech
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem**** -
i paused my ipod and sat it down for about a half an hour. I returned to use it and when i pressed play it would not play and the screen was frozen. I restarted my ipod and now when i turn it on a sign comes up with an error message that says www.apple.com/support/ipod and then it shut off. I plugged it into my mac and it just keeps rebooting itself and return to the same message and then rebooting again.
i had the same problem. i saw a great video on how to fix it and it worked for me.
the guy who posted it also offers free advice. check it out. good luck.
http://www.youtube.com/watch?v=1KoWw9PZv50&feature=channel_page -
All of a sudden I can no longer connect to iTunes store. There is no error message - it just hangs.
After 3 years of happily using iTunes store all of a sudden I can no longer connect. There is no error message, the attempted connection just hangs. Why?
I ran the iTunes diagnostic and got a positive result - I am, apparently, in contact with the Store. But I still cannot connect. I have carried out all ther suggested operations ... and still cannot connect! The diagnostics gave me the following report:
MicrosoftWindows Vista Home Premium Edition Service Pack 2 (Build 6002)
DellInc. Inspiron 530s
iTunes10.4.1.10
QuickTime7.7
FairPlay1.12.20
AppleApplication Support 2.0.1
iPodUpdater Library 10.0d2
CDDriver 2.2.0.1
CDDriver DLL 2.1.3.0
AppleMobile Device 3.4.1.2
AppleMobile Device Driver 1.57.0.0
Bonjour3.0.0.2 (333.2)
GracenoteSDK 1.9.1.485
GracenoteMusicID 1.9.1.102
GracenoteSubmit 1.9.1.133
GracenoteDSP 1.9.1.43
iTunesSerial Number 00C9ABD80C0C17E8
Currentuser is an administrator.
Thecurrent local date and time is 2011-09-16 09:59:06.
iTunesis not running in safe mode.
WebKitaccelerated compositing is enabled.
HDCPis not supported.
CoreMedia is supported.
VideoDisplay Information
AdvancedMicro Devices, Inc., ATI Radeon HD 2400 Pro
****External Plug-ins Information ****
Plug-inName: ilikesidebarplugin.dll
Plug-inLoaded: Yes
Plug-inVersion: Unknown
Plug-inFile Version: 0.1.2.17
Plug-inPath: C:\Program Files\iTunes\Plug-ins\ilikesidebarplugin.dll
GeniusID: 89d0032fba99eb83151c418c649bb3e6
iPodService10.4.1.10 is currently running.
iTunesHelper10.4.1.10 is currently running.
AppleMobile Device service 3.3.0.0 is currently running.
****Network Connectivity Tests ****
NetworkAdapter Information
AdapterName: {185DA300-4391-4FBB-9BC2-AC4894001787}
Description: Intel(R)82562V-2 10/100 Network Connection
IPAddress: 0.0.0.0
SubnetMask: 0.0.0.0
DefaultGateway: 0.0.0.0
DHCPEnabled: Yes
DHCPServer:
LeaseObtained: Thu Jan 01 01:00:00 1970
LeaseExpires: Thu Jan 01 01:00:00 1970
DNSServers:
AdapterName: {63090950-4731-4D95-89CB-57F1B6ABBACC}
Description: Broadcom802.11g Netværkskort
IPAddress: 192.168.1.106
SubnetMask: 255.255.255.0
DefaultGateway: 192.168.1.1
DHCPEnabled: Yes
DHCPServer: 192.168.1.1
LeaseObtained: Fri Sep 16 01:34:21 2011
LeaseExpires: Sat Sep 17 01:34:21 2011
DNSServers: 193.162.153.164
194.239.134.83
ActiveConnection: LAN-forbindelse
Connected: Yes
Online: Yes
UsingModem: No
UsingLAN: Yes
UsingProxy: No
SSL3.0 Support: Enabled
TLS1.0 Support: Enabled
FirewallInformation
Connectionattempt to Apple web site was successful.
Connectionattempt to browsing iTunes Store was successful.
Connectionattempt to purchasing from iTunes Store was successful.
Connectionattempt to iPhone activation server was successful.
Connectionattempt to firmware update server was successful.
Connectionattempt to Gracenote server was successful.
Lastsuccessful iTunes Store access was 2011-09-16 09:51:39. -
Error message with hard disk disabled
Hey Guys,
I have a probem with my ultrabook. Few weeks back my laptop suddeny gave me problem and windows won't boot giving the following error message
I tried booting my windows through safe mode options, but nothing worked. I went to a computer technician and he told me that the problem is software not hardware related, and he suggested that reinstalling windows woud fix the problem. Concerned about my data, I asked him to retrieve my data from the hard disk which he was able to do. Later, I tried reinstalling windows 7 (through a bootable usb drive as my laptop does not have DVD/CD Drive). When I was reinstalling windows, it showed no hard disk availabe and asked to load drivers.
At the startup when i press the power button, there was a black screen (one where you need to press Ctrl+I in order to go into configuration utiity, sorry that relevant image of that screen is not with me)showing the hard disk availabe of approx. 30gb . So, I press Ctrl+I to go into configuration utility and reset that 30gb hard disk to Non-Raid drive, and during windows installation this 30gb was available to me for use. But, my concern was that my laptop has two hard drive 500gb (SATA) + 32 gb (SSD, if i am correct). So i guess after resetting the 30gb hard disk to non-raid disk, I got access to it ( but I am not sure if this is correct, really sorry if my technical acumen is of annoyance), but not to the 500gb.
I figured there might be connection probem of 500gb hard disk, so I opened it up and found that the technician hadn't connected the hard disk with the motherboard, and had placed it upside down. So, I made the connection and tried to start the laptop, and got this message.
Here, you can see that it says hard disk is disabled. And when I don't press any key then I get this screen..
I also ran the hp system diagnostic check, and my hard disk passed for both smart and extensive check. So, I believe that my hard disk is fine. And when I press Ctrl+I, i can't do anything with this hard disk, not even reset it since it says it is disabled.
I went through many posts trying to find something similar to my problem, but found nothing to any avail. I would be grateful, if anyone could help me out.
Thanks in advance.Hi @prateek88 ,
Welcome to the HP Forums!
It is a terrific place to find answers and tips!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that you got a blue screen error on your notebook. You took it to a technician and he informed you it not hardware but software. He did retrieve your data off the 500 GB hard drive.
As your notebook has two hard drives a 32 GB SSD and the 500 GB SATA. You disabled the raid configuration and were able to access the SSD.
Were you able to complete the installation of Windows?
If you have Windows installed and have corrected the connection issue with the 500 GB drive would you try this.
Raid configurations are beyond my support bounds just so you are aware.
Reconfigure it back to the original raid.
Try restoring the defaults from the bios screen.
Check for a bios update for your system. and install if applicable.
If this has not helped please contact HP support for further assistance.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Best of Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! -
Error messages in modem/router event log
Share on facebook Share on twitter Share on email Share on print More Sharing Services 2 Hi folks. Just purchased a new wireless cable modem/router from Telstra (Gateway Max - Netgear C6300BD-1TLAUS). I've just noticed the following messages in the Event Log. Is there something wrong and, if so, what's causing it? TimePriorityDescription Sun Jun 21 13:34:47 2015 Error (4) DHCP RENEW WARNING - Field invalid in response v4 option;CM-MAC=25:2a:8c:de:74:e8;CMTS-MAC=00:00:84:a0:1b:54;CM-QOS=1.1;CM-VER=3.0; Sun Jun 21 11:44:19 2015 Critical (3) Started Unicast Maintenance Ranging - No Response received - T3 time-out;CM-MAC=25:2a:8c:de:74:e8;CMTS-MAC=00:00:84:a0:1b:54;CM-QOS=1.1;CM-VER=3.0; Sun Jun 21 09:34:47 2015 Error (4) DHCP RENEW WARNING - Field invalid in response v4 option;CM-MAC=25:2a:8c:de:74:e8;CMTS-MAC=00:00:84:a0:1b:54;CM-QOS=1.1;CM-VER=3.0; Sun Jun 21 04:46:49 2015 Critical (3) Started Unicast Maintenance Ranging - No Response received - T3 time-out;CM-MAC=25:2a:8c:de:74:e8;CMTS-MAC=00:00:84:a0:1b:54;CM-QOS=1.1;CM-VER=3.0; Sun Jun 21 01:34:47 2015 Error (4) DHCP RENEW WARNING - Field invalid in response v4 option;CM-MAC=25:2a:8c:de:74:e8;CMTS-MAC=00:00:84:a0:1b:54;CM-QOS=1.1;CM-VER=3.0; Sat Jun 20 16:12:38 2015 Critical (3) Started Unicast Maintenance Ranging - No Response received - T3 time-out;CM-MAC=25:2a:8c:de:74:e8;CMTS-MAC=00:00:84:a0:1b:54;CM-QOS=1.1;CM-VER=3.0; Sat Jun 20 13:34:47 2015 Error (4) DHCP RENEW WARNING - Field invalid in response v4 option;CM-MAC=25:2a:8c:de:74:e8;CMTS-MAC=00:00:84:a0:1b:54;CM-QOS=1.1;CM-VER=3.0; This is just a sample of the log file - it's much longer than this. Appreciate any help you can provide. Thanks.NOTE: MAC addresses above have been changed )...just to be safe. :-)
Hi Turbo, have u called and what was the response, if any? I have exactly the same error messages and my connection drops out every 24 to 48 hours without fail. Windows's Event Viewer and Intel's ProSet Diagnosis confirms that the computer was NOT being assigned an IP address. Setting a Static IP on the Local Machine does not help either. I have called them and they wanted to send out a tech. I refused because it seems very much to me that this is a software issue, either with the affected computer or with the Gateway's firmware. Doesn't sound like hardware or the pit in the street. The technician would have come and Telstra would have charged me for the visit I felt. Fred
-
Toshiba PX1267E-1G32 Ext HD Error Message says USB device has malfunctioned
Hi
I have Windows XP and have been using my Toshiba External HD for a few years.
I am a novice.
Suddenly yesterday the below message appeared and I cannot get any computer to recognise the device.
"+USB Device Not Recognized+
+One of the USB devices attached to this computer has malfunctioned, and Windows does not recognise it. For assisstance in solving this problem click this message+."
I've tried to reinstall the drivers from the internet & the HDD CD but the same message occurs.
I've installed it onto another computer and the same error message.
The device still makes a noise and the blue light is on but no other action.
Is there anything I can easily do?
Many thanks in anticipation
naveedsyed> I thought that sort of stuff wasn't meant to happen to external drives....
Why not? The external HDD is the same like an internal notebook HDD which dies as well
> Any other suggestions welcome
I assume this is a 3.5 HDD
You could remove this HDD from the HDD case and could connect this HDD directly to an desktop PC using an IDE or SATA cable (Im not sure if this is an SATA or IDE HDD).
If the BIOS would recognize the HDD then you would have good chances to get access to the data stored on this HDD.
Greets
Maybe you are looking for
-
Hello Team, I was restoreing my Iphone. but everytime giving error..
-
Illustrator CS6 is not listed in the Programs panel.
Hi, my Illustrator CS6 is not listed in the Programs panel in the Extensions Manager. How do I restore it? A bit of history: I had been using ScriptBay with Illustrator CS6 before, without problems. After my someone came and resolve some of my comput
-
ECC - SXI_MONITOR - How to resend Only System Error Not Application Error Automatically ?
Hi All, is there any way to re-send or re-process only system error which occured due to QRFC_SHORT_DUMP. We should not re-send Application Errror. I have tried the program RSXMB_RESTART_MESSAGES , it restarts all System Error and Application Error.
-
Tomcat Server Port Number: Why do I have to enter the port number?
My ultimate goal is to setup a website that displays data from a database. I will use Java, Apache, Oracle, and whatever else I need to create a website the uses servlets, JavaServer Pages, and JDBC. I�ve got four Pentium III computers: 1. Windows 20
-
Help with photoshop quitting and AMD graphics
help with photoshop quitting and AMD graphics im not a techy, but it appears i have to do someting with my amd graphics card - this might be why my software is crashing - ive no idea what to do though