Sata III hard drive cable compatible with older generation of macbook pro

Would my macbook ( 17 in mid 2009 ) be compatible with a new hard drive cable ( sata III ) ? I upgraded my hard drive to Samsung Pro 840 and wanted to upgrade my sata II cable to a sata III for faster read and write. Is this possible?

Dave The Newbie,
replacing the cable will not increase the interface speed, just as putting racing slicks on a minivan won’t make it a dragster. I have the same model SSD in my Mid 2010 MacBook Pro, and my MacBook Pro’s SATA interface is limited to SATA II, just like yours. Unless you’re planning on mainly running disk-bound apps, it’s not something that you’ll need to worry about — just enjoy the SSD as is.

Similar Messages

  • I would like to replace the hard drive cable for a 13" mid 2010 macbook pro.  What is the right model of the hard drive cable?

    i would like to replace the hard drive cable for a 13" mid 2010 macbook pro.  What is the right model of the hard drive cable?

    https://www.ifixit.com/Store/Parts/MacBook-Pro-13-Inch-Unibody-Model-A1278-Mid-2 009-Mid-2010-Hard-Drive-Cable/IF163-013-1
    Apple Part #: 922-9062, 821-0814-A

  • Can anyone tell me if this Seagate drive is compatible with a 2008 13" MacBook Pro?

    I am looking to upgrade my wife's 2008 13" MacBook Pro.  She only has the 256GB drive and has <10GB remaining.  The thing has come to a screetching hault.  Will this drive work?
    http://www.bhphotovideo.com/c/product/937740-REG/seagate_st1000lm014_hybrid_1tb_ 2_5_sata.html
    Thanks,
    Mike

    Awesome!  Thanks for the quick reply!

  • Can i install sata III hard drive?

    Hi, i've an iMac G5 20" iSight with an intel core duo 2ghz. I would like to know if  i can install a sata III hard drive like 128GB Crucial m4 2.5" SSD.
    Thx a lot.

    First, you do not have an iMac G5. G5s are PPC machines, but yours is an Intel model.
    You can install a SATA III drive but I would not spend the money since your model only supports SATA I or SATA II depending on which model you have. I would also be careful about using Crucial SSDs because they may not all work in a Mac. I would get your SSD at OWC instead. You will find their equivalent product for SATA I or SATA II here. I have two of these drives, and they are excellent.

  • What internal hard drive is compatible with Macbook Pro (15-inch, late 2008)?

    G'day guys,
    I was just wondering which internal hard drive is compatible with Macbook Pro (15-inch, late 2008)?
    Thanks
    bryce

    same as used by Apple:
    http://www.ebay.com/itm/Toshiba-MQ01ABD1001TB-1TB-2-5-inch-SATA-Laptop-Notebook- Hard-Drive-1-0-TB-/380643766002?pt=US_Internal_Hard_Disk_Drives&hash=item58a022e ef2
    I own many of them.

  • Will this solid state hard drive be compatible with HP Pavilion dm4-1265dx

    My stock hard-drive is done for so I thought I would take a bad situation and turn it into an opportunity to upgrade. I want to replace my hard-drive with a 750GB or 1TB SSD or Hybrid, but having a lot of trouble figuring out which one will be compatible. 
    Will this hard-drive be compatible with my laptop, is it even good?
    http://www.amazon.com/Seagate-Solid-Hybrid-2-5-Inc​h-ST1000LM014/dp/B00B99JUBQ/ref=dp_ob_title_ce
    and/or can anyone recommend one to me that will do the trick, of course I am trying to keep cost's down,
    Thanks you all so much for the help,
    This question was solved.
    View Solution.

    Hi,
    I believe I did reply this message elsewhere few days ago. Anyway. 750Gb or 1Tb is fine for your machine.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • What external drives work well with a late 2011 MacBook Pro?  I ask because I just found out the hard way that a Samsung EVO 840 does not.  Also should I avail myself of something that works with Thunderbolt or Firewire?

    What external drives work well with a late 2011 MacBook Pro (I7, Lion OS) apart from my Kingston flash and USB drive, and the SD drives that I use in my cameras and recording devices?  I ask because I just found out the hard way that a Samsung EVO 840 does not.  Also, should I avail myself of something that works with the Thunderbolt or Firewire connections?  I'm looking to back up music and video files created and/or processed in Logic Pro and the Adobe Production Premium software suite (Premier Pro, After Effects, Audition, etc).

    Hmm, not sure what problems you had installing this drive. The review here gives it good marks for Mac:
    http://www.amazon.com/Samsung-Electronics-EVO-Series-2-5-Inch-MZ-7TE1T0BW/produc t-reviews/B00E3W16OU
    There does seem to be a lot of prep to make it work:
    "1. Preparation to install your new shiny SSD
    1.a You will need a migration tool (I used the Sabrent kit USB 3.0 to Sata that was suggested in these review) see link http://www.amazon.com/gp/product/B00DQJME7Y/ref=oh_details_o03_s01_i01?ie=UTF8&p sc=1
    1.b You will need to download a trim enabler (mid 2012 macbooks only support native trim with apple brand ssd's) I recommend going to cindori.org and downloading trim enabler version 3.xx. You can do this step before or after the OS migration
    1.c You cannot use the Samsung SSD migration software *don't worry Mac has its own imaging/migration utility*"
    Also in those reviews:
    " Only down side when using this product in a Mac Mini is you will be required to download and install Trim Enabler so that your drive performs optimally on your Mac device. This is an Apple issue, not Samsung, but it is an extra step you will have to take after you install the hard drive, and any time you perform an OS upgrade." He rant's on.
    Personally I only deal with OWC:
    http://eshop.macsales.com/shop/SSD/OWC/
    They are very knowledgable and if there's a problem they will gladly take back the item. (Never happened to me yet - 8 years and counting).
    Just upgraded my 13" MBP 2011 to 120 GB for $79. Adobe CS 6 opens in 3 seconds! Awesome!
    When I was in Chicago I had a pro photographer for a client. She wound up with 4 internal drives in her Pro, 4 external drives and an dual array locked in a steel vault in the basement. All from OWC. OK she was a bit paranoid. Great client though.
    As far as value for price:
    http://eshop.macsales.com/item/OWC/MES3FH7500G/
    500 GB for $130.
    However as far as reliability is concerned:
    http://www.rockpapershotgun.com/2014/01/30/are-ssds-reliable/
    http://www.extremetech.com/computing/173887-ssd-stress-testing-finds-intel-might -be-the-only-reliable-drive-manufacturer
    So sudden power loss is an issue with SSDs.
    Personally I'd go with a moderate sized SSD internally and a conventional external for backup. An array would be the most reliable.

  • Can i use my ext hard drive USB 2 on the the new macbook pro laptops with a USB3

    can i use my ext hard drive USB 2 on the the new macbook pro laptops with a USB3

    stephan ach wrote:
    but i read that there are lots of problems with the new macbook pro. i  have all my data on ext. la cie hard drive. i wont have a problem reading them?
    What problems specifically? If you have a problem you should start your own thread and explain the problem in detail.
    External USB devices including hard drives and DVD work fine on the new Macbook Pros.

  • My internal hard drive isn't being recognized on my macbook pro but when I put the HD in my Mac Pro (desktop), the desktop computer recognizes the HD.  When I insert the installer CD on my laptop, it also doesn't recognize my hard drive. Please help!

    My internal hard drive isn't being recognized on my macbook pro but when I put the HD in my Mac Pro (desktop), the desktop computer recognizes the HD.  When I insert the installer CD on my laptop, it also doesn't recognize my hard drive. Please help! Thank you!
    I've also been getting an image with the folder and question mark. I've tried everything on the apple support page but it doesn't seem to work either.

    Well, I tried all of your suggestions and they didn't work -- no surprise because I was trying to backup to my external c.d. disk.  Duh!  The application for the home is in the mail.

  • What Internal hard drive can I use to upgrade my macbook pro 2010

    what Internal hard drive can I use to upgrade my macbook pro 2010

    You may use any 2.5" SATA notebook drive not higher than 12.5 mm that uses either 1.5 or 3.0 Gb/s interface. Visit OWC for available options and prices.

  • Is it bad for the hard drive or the processor to carry my macbook pro while it is asleep?

    I know for a fact that old notebooks used IDE hard drives and thus if they are carried while in sleep mode, it might damage the hard drive. For a Macbook Pro, is it dangerous at all to carry it while in sleep mode? Does it affect the processor or the hard drive or any other hardware at all?
    Thanks,
    j

    Welcome to Apple Support Communities
    In general, it is dangerous to carry any laptop with a physical hard drive while it is turned on, as the hard drive might get damaged. However, the MacBook Pro with Retina display (the same applies to the new MacBook and all MacBooks Air) uses flash storage, so you can just put the computer to sleep and carry it (you can do it even if it is turned on): no parts will be damaged.

  • My Western Digital external hard drive suddenly stopped showing up on my Macbook Pro and disappeared from Disk Utility. It works on a PC.

    My Western Digital external hard drive suddenly stopped showing up on my macbook pro and it disappeared from disk utility. I have tried making invisible files visible but nothing has worked and my hard drive shows up on a PC but not my Mac anymore.

    What is the manufacturer of the external and how old is it? Does it have its own AC power supply or is it USB bus powered?

  • Hard drive cameras compatible with FCE 4?

    I am comparing cameras for purchase for our video broadcast program. I like the idea of the hard-drive camera so we eliminate tape and all its aggravations.
    However, I notice the hard drive cameras interface with USB. Can FCE import these files?
    Thank you.
    Chris Schwalm
    Message was edited by: scwalminator

    Hi Chris
    What tape brand are you using... to have bleed-through sounds like very poor quality tapestock.
    I have never had a problem as you mention in the 8 years I have been using mini-dv tapes in dvcpro vt players, the only problem I have had is with JVC cassettes, snapping and needing to be spliced, here in South Africa we tend to use SONY/PANASONIC tapestock.
    Really if you go back in the forum you will find a huge discussion about the pros/cons of hard-drive camera's vs minidv camera's.
    With mini-dv you do not need the camera to edit from, in the case of hard-drive camera's the camera is out of duty for the length of the edit, with mini-dv the footage is separate from the camera.
    If it was me, I would either argue for a bigger budget based on a number of factors. Final Cut Express is capable of dealing with AVCHD footage after it has been converted, if you do not like this then Final Cut Studio 2 which would cost the same as a Sony HVR A1.
    Tape stock is much cheaper than camera's or P2 memory cards.
    Something we use here is the FIRESTORE external hard drive that is attached to the camera and records footage at the same time as the camera records to tape. Very handy!!!!
    That would solve the problem, you have instant access to the footage and an archive tape.
    Justin... Durban... South Africa

  • What external hard drive is compatible with Mountain Lion?

    Mountain Lion is no longer recognizing the external hard drive I was using for Time Machine --
    WD My Book Essential 3.0 WDBACW0020HBK.  What is a good external hard drive to use with Mountain Lion?

    As Shootist007 said, go to /Applications/Utilities/Disk Utility.  Select the drive you want to reformat in the Disk Utility Sidebar and make sure it say's Format : Mac OS Extended (Journaled). If so, simply hit the Erase button. Once that's done go back to Time Machine and reselect it if needed.
    If you continue to have problems with the drive, I've always used OWC drives with few issues.  Others use Lacie drives.

  • Will a SATA III Hard Drive work on a Mac Pro 2,1 (2008)

    Will a SATA III work on a Mac Pro 2,1 (I think 2008)?
    http://www.amazon.com/gp/product/B004CSIG1G/ref=wms_ohs_product?ie=UTF8&psc=1
    If not the above, then what?

    Apple Pro RAID card is not compatible with 3TB drives and never will be it now seems. It also lacks any real performance and is destined where RAID 5 is a must.
    SSDs are a more interesting matter in choice and support... but not traditional platter type drives.
    I use SSD for system now 100% on multiple systems, 10K WD VR ($200 for 1TB / 180MB/sec and variety of WD blacks and Green.
    2008 has some interesting stuff, PCIe mix and support and booting, but more choices in GPU. Runs best with all 8 DIMM slots filled. Was the first to have UEFI to support 64-bit kernel but does not support industry standard enough to support Windows 8 UEFI.
    Storage market would be a total mess like it was back in 2004 when SATA 1.0 moved to 2.0 and lots of problems. SATA 1.0 in early G5 was just PATA with an SATA interface chip slapped on and not "native" SATA. THAT is where the "will the IBM Hitachi or Seagate or Maxtor" really did require research. Not with Mac Pro line 2006 and on.

Maybe you are looking for

  • Makt_single_read

    Hi experts, I am using makt_single_read function module. I got a short dump error while executing this FM. It point out the SPRAS parameter. Pls any one give one example to use this function module. Thanks. Message was edited by:         Murugan Arum

  • GW 8.0.1 Excel 2007 Save As gives unreadable spreadsheet

    Hi, We're testing a Win 7 machine with Office 2007 on our GW 8.0.1 HP1 system and have come across a strange issue. If we open an existing GroupWise Excel 2003 document, edit it and then choose Save As -> New Document back into GroupWise the document

  • PutDocument and XQuery update in the same txn

    Hey all! Is it a good idea to use putDocument() and then insert nodes into another document in the same transaction? The only thread I have hangs on XmlQueryExpression qe = xmlManager->prepare(...). If it's not a good idea, can I somehow perform thos

  • Import user defined class in JSP page

    In my test.jsp page, I tried to display the user name using the value returned from a class UserInfo's static function getUsername(), like this: <%@page import="toystore.view.UserInfo" %> <html:text property="username" value="<%= UserInfo.getUsername

  • X230 received, few issues (keyboard, screen). Thoughts?

    First, it arrived with a broken key (left Ctrl fell out when I opened the lid).  I have a new keyboard on order (they said 2 business days to arrive), so no biggie there.  But is the keyboard issue common? Second, the screen has a bright spot in the