SATA in Windows XP problems due to wrong driver?

I've noticed after playing with getting the SATA working properly in Windows XP, that after slipstreaming in the "Intel(R) 631xESB/632xESB SATA RAID Controller" drivers, that upon installation, I instead wind up having in device manager, under IDE Controllers, "Intel(R) 631xESB/6321ESB/3100 Chipset Serial ATA Storage Controller - 2680". Looking at the properties of the this SATA driver, it says it's Intel, but looking at the drivers themselves, they're just basic MS XP drivers, not the iastor.sys file that it should be.
Looking closer at what the PCI hardware ID for the controller should be, the slipstreamed driver shows "PCI\VEN8086&DEV_2681&CC0106". The PCI hardware ID for the controller, according to device manager is "PCI\VEN8086&DEV_2680&CC0101".
To me, that looks like two different pieces of hardware, and no how is the correct driver going to load.
Now, I don't know what driver is being loaded with Bootcamp 1.1, since I cannot get Bootcamp to work with my RAID 0 boot drive, even with a separate, blank HD in one of the bays.
If any of you people know about this stuff more than I do, can you possibly look into it and figure out if this might be the reason we are not getting Ultra DMA 5 on the HD's?
(I will admit, with the slipstreamed drivers loaded, and showing "Multi-Word DMA", it seems pretty darned fast!!!)
Right now, comparing this newly installed MacPro with XP to my pretty new Dell Optiplex GX620 with CoreDuo 3.2Ghz, the MacPRO is noticeably FASTER!!! Now, I can have my cake and eat it too!!!
Mac Pro 2.66Ghz   Mac OS X (10.4.7)   2GB RAM, RAPTORS in RAID0, WinXP
Mac Pro 2.66Ghz   Mac OS X (10.4.7)   2GB RAM

Here is a post:
AFS2K.SYS is a file that is written by Oak Technology. It shouldn't be a problem on your system unless you are running Windows XP and have non XP versions of the following software installed on your computer; -Plextor Manager 2000 -SimpliCD Recorder -Liquid Audio
If you have any of those software packages installed, please uninstall them and delete afs2k.sys. That should fix things for you.
SimpliCD CaseID: SCDR7992
Please reference the CaseID: above for faster response.
SimpliCD Support Team - Paul
This is found here: http://www.driversearch.com/forums/sound/6393.html
Good luck!
Eric

Similar Messages

  • WIndows 8.1 printer error: windows cannot print due to a problem with the current printer set up

    My HP OFFICEJET 8500 PRO was working just fine wirelessly until I installed the Windows 8.1 update from the Microsoft.  Now I cannot print at all.  I get an error that says,  "windows cannot print due to a problem with the current printer set up".  I have tried reinstalling and a ton of other solutions to no avail.  Can someone PLEASE Help!

    Hello there, @jesseangelique ,
    Welcome to the Community!
    I would love to help you with the printing issue you're having, since the Windows 8.1 that was done.
    Please run the Print and Scan Doctor. Write me back with the results or post a screen shot of the results and I will have a look at them.
    This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results.
    Also, let me know which Officejet 8500 Model you have:
     HP Officejet Pro 8500 All-in-One Printer - A909a
     HP Officejet Pro 8500 All-in-One Printer - A909b
     HP Officejet Pro 8500 Premier All-in-One Printer - A909n
     HP Officejet Pro 8500 Wireless All-in-One Printer - A909g
    Hope to hear from you!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • My macbook pro was repaired and since then i can't get nor photoshop or bridge to initialize. a window appears that says it has  initializing problems due to an icc profile issue.

    my macbook pro was repaired and since then i can't get nor photoshop cs5 or bridge cs5 to initialize. a window appears that says it has initializing problems due to an icc profile issue.
    there appear two error messages. the first one says that there has been a problem sincronizing because of a programme error. the second one appears after you clicked ok on the first window and says that photoshop couldn't be initialized because the icc profile is invalid.
    does anyone know if i have to delete any system or photoshop preference? the illustrator is also having troubles. thanks

    thanks! what finnally worked better was renaming the «settings» folder in te «color folder» in the library with ~before the name. now indesign is asking me for thw icc profiles but still works, so i asume i can reinstall color settings only for indesign and go on.

  • Cannot download itunes.....says there is a windows inslaller problem

    ttried to update my iphone 4 to ios5.......needed to update itunes....tried came up with windows inslaller .........removed itunes, now cannot install due to same windows inslaller problem, any ideas peeps......its doin my head in!!!!!!

    Are you using a 32-bit or 64-bit version of Windows, Jim?
    If it's 64-bit (Vista or Windows 7), I'd try the following instructions:
    Vista Home Premium (x64) and installing Itunes - SOLUTION

  • WINDOWS INSTALLER PROBLEM WITH DESKTOP MANAGER

    Please help!! I am a user of the Blackberry Desk Top Manager, running under Windows XP Service Pack 4.5. I recently downloaded the latest version of Desk Top Manager and I am getting the following error: - Flashing intermittently, whilst running the newly downloaded Desktop Manager - "Windows Installer Preparing to Install". I have removed the programme, downloaded it again from Blackberry's website and run my Windows updates to no available. I have now been advised that I must format my entire computer and reload Windows, which seems to be a rather onerous solution, as I have been using Blackberry's Synchronisation Programme for over a year successfully before this took place. I should appreciate it if you would let me know how this problem on my IBM Think Pad Laptop can be cured.

    halimsujanto wrote:
    Hi all..
    I am having the same problem with desktop software 6, but my problem is more like this..
    http://www.blackberry.com/btsc/KB19300
    The Windows Installer pop-up during installation and cannot continue, it seems that windows installer 4.5 is the cause, but I cannot uninstall windows installer 4.5 because many of my programs were using this..
    In this knowledge base solution it says to run BlackBerry Desktop Software.msi, but on BlackBerry Desktop Software 6, it need to run from setup.exe and cannot continue.. so I cannot install desktop software 6 on my computer, but I am able to install older version desktop software ie. version 4.2 to version 5.
    I think that I am gonna reply here instead of making new thread about windows installer 4.5 and Desktop Software 6, please move if I did wrong.
    PS. Bifocals..
    The link you provided is missing. Or it just back to BlackBerry Technical Solution Center page and I tried searching the KB13781 with no success.
    Please if there is other link that may be good for my problem.
    Thank you very much.
    Hi ihalimsujanto and welcome to the forums!
    My first concern is that you do have a version of desktop manager that you can maintain your device and PIM data with, do you?
    Please post back with as much detail as possible regarding your hardware and software setup.
    Also post what steps you have taken to resolve the issue. The more detail we have the better we can help you. I'll reread KB 19300 and find what happened to my broken link.
    Thanks.
    Bifocals
    EDIT:
    ihalimsujanto,
    Please review this Microsoft Knowledgebase  Article ID: 555175
    How to resolve Common "Windows Installer" Problems
    Methods 3 and 4 may be pertinent.
    Let us know how it goes!
    Bifocals
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • FileVault: cannot enable due to "wrong disk format"

    Hi fellow Mac users,
    I just tried to enable FileVault on my iMac 27" but I got an error message (after completing the security questions and hitting "restart") that FileVault cannot be activated because "due to wrong disk format: some disk formats do not support the recovery partion that needs to be created... "
    My internal disk however has never been touched by me, it is Mac OS Extended (Journaled) / GUID, so imho everything should be fine.
    Do you have any ideas what might be wrong?
    thanks a lot
    best
    Wolfgang

    Triple-click anywhere in the line below on this page to select it:
    { diskutil list; echo; diskutil cs list; } | open -f -a TextEdit
    Copy the selected text to the Clipboard (command-C).
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V).
    A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. The title of the window doesn't matter, and you don't need to post that.
    If any personal information appears in the output, anonymize before posting, but don’t remove the context.

  • SCCM 2012 - Windows 7 OSD wrong driver letter?

    Hi,
    I am having issues with SCCM 2012 OSD / MSD 2012 and deploying Windows 7
    I am using a captured WIM and I have noticed that on a machine it deploys
    to the E: drive even if I have not data on the hard disk (I have cleaned it
    with diskpart). So when the task Sequence is finished it the Windows
    directory is E:\Windows which is not what I want.
    Now what I thought I would try is moving the CD-ROM drive to a different
    SATA controller from AHCI port 2 to AHCI Port 3.
    Now this made the OS deploy correctly to C: with the final state being C:\Windows
    1. So my questions are "How" does SCCM determine what the final logical drive that
    windows will be put on?
    2. Is there a way I can force it to be C: drive no matter what port my CD-ROM is on?
    3. Also if I am using UEFI and Bitlocker is the logic the same?
    4. I have noticed when I run diskpart and do list volumes the CD-ROM drive appears?
       in the list is this normal?
    It seems very bizzare the way it works.
    Thanks,
    Ward.

    Hi,
    Thanks for your response actually we are already doing that. :)
    Sorry I will re-correct my original post something I did not point out - opps - is we are trying to build these by USB.
    It seems that if there is a clean partition and the system boots and happens to choose allocate either the USB key or DVD rom to C: drive then the OS will install on the wrong drive.
    So my idea of moving it to another controller seems to make it better but not consistently reliable.
    It seems to work if the following conditions are true - need to do a more testing to confirm:
    The DVD rom shows up and USB not using the C: so it seems the it will work.
    If there is already a partition on the drive called C: and it is already allocated then all seems ok as well
    So can I get some more clarity on this - I would like to be able to control it better :)
    Thanks,
    Ward

  • K8T MS 6702 V 1.0 + Seagate Barracuda SATA II + Windows 7

    Hello,
    Im new on this forum! Im having serious trouble getting my system set up. I have a K8T Neo MS 6702 V 1.0 mobo and right now im trying to install windows 7 on my new hard drive. the hard drive is a Seagate barracuda 7200 SATA 2. when installing windows 7 I get asked to deliver drivers for the new hard drive. when I put in a CD-rom with drivers or a Floppy, I am able to load the drivers and view the partition on the hard drive. So om thinking windows must be able to install. when I roll through the installation it has to reboot several times. the first reboot works out fine, but the second one doesn't go all that well. is boots up to the splash screen. when I try safe mode I can see it loading windows up to a file called: classpnp.sys. Now I have read that this mobo does not work with SATA 2, but then you should be able to jumper the drive to SATA 1. The thing is , there is no way I can use jumpers on this drive. I will give a list of my system specs now.
    AMD Athlon 64 (socket 754)
    K8T Neo MS-6702 ATX V1.0
    VIA k8T800 chipset
    VIA VT8237 chipset
    Promise 20378 on board
    Seagate barracuda SATA 2 750 Gb
    I have tried going into the recovery mode of windows 7 with the installation DVD but when I have it to check out my boot problems it comes back with an error saying that there is no hard drive installed. Im wondering if this has to do with the mobo or the harddrive. I havn't updated the bios because I'm affraid I mess up the bios.
    If you guys need any more info ill try and find out!
    I hope someone can help me out here.

     I don't really know but you can read this and see if it does you any good.
    http://www.sevenforums.com/drivers/19163-fasttrak-376-378-windows-7-driver-help.html

  • 975X PUE SATA RAID Windows XP Blue Screen Install

    Hi,
    I've just purchased a new MSI 975X PUE motherboard and am trying to install Windows on it.
    I have connected 2x WD Raptor 36GB drives, and set them up in a RAID 0 array using the Ctrl+I RAID BIOS utility. I have set the SATA config in the BIOS to RAID mode, and turned off the other SATA controller... The RAID BIOS detects the array ok after it has been set up, and shows it as OK.
    When I boot from a Windows XP SP2 CD I press F6 and choose the RAID Driver for ICH7R RAID. Windows tells me that it already has a driver but this version is newer, so I say to use the one on the floppy (I have tried without doing this and Windows does not detect any Hard Drives at all).
    Once I have loaded the drivers it continues loading the other drivers for the setup, and then gets to "Loading Windows Setup", here is waits for a minute or so and the blue screens.... The stop code is 0x7B (INACCESSIBLE_BOOT_DEVICE)...
    I have upgraded the BIOS from 7.0 to 7.1 (not 7.2 yet as I have read about problems with it).
    I've tried various versions of the drivers from different locations, and each time it blue screens in exactly the same place... I'm beginning to get very annoyed with this as I shouldn't be expected to find my own drivers when there are ones supplied on the CD...
    Is anyone able to suggest what I could do?
    Thanks
    [EDIT] Also I have tried an install of Windows Vista Beta and that installed fine using the drivers from the CD...

    I must say again that the problem is located in the memory modules. As suggested by Hans before, try running memtest86 first,
    http://filexoom.com/files/2006/11/1/41824/memtest86%2B-1.65.floppy.zip
     and sometimes even if tests runs fine, doesn't mean that memory is OK. It just might be that that type of memory doesn't fit within your MB. As I mention before, my friend was using Corsair for his MB(getting the message INACCESSIBLE_BOOT_DEVICE), and after replacing with A-Data(definitely lower quality memory), everything went fine. So, try with another memory.
     As for Murphyman, when you use the yellow connector, you are using the Jmicron controller,witch asks for RAID drivers before you use the device installed on it. The blue IDE controller is controlled by Intel's ICH7DH, and no RAID driver is need. So, try connecting the DVD drive on the blue connector, and see if will work.

  • Reports 6i windows display problem on Windows NT system

    Iam using Reports 6i on Windows NT.All the reports 6i windows are became transporent windows, displying problem (repainting problem). I did fresh installation. But iam not able to solve this.

    I am using same fonts on all these plateforms.Look more closely at those fonts. They may have the same names, but the Windows 2000 versions may be larger (able to render more characters).

  • Photoshop CS6 unable to use due to display driver (Intel) problem

    Hi
    I am experiencing problems using Photoshop CS6 (not extended version). I have recently installed Design standard and I'm not having this problem with Illustrator.
    Each time I run PS, I receive a pop up with "display driver Intel HD graphics drivers for Windows 8(R) stopped responding and has successfully been recovered". PS opens but I cannot use it and I have to force end task in task manager.
    I have an Asus Laptop (i7) with Windows 8.1, graphics card Intel HD 4400, it also has an NVIDA Geoforce GT 740M graphic card.
    so far:
    I have installed the latest driver from Intel (10.18.10.3345).
    I have re-booted in Safe Mode and can open PS - I receive the message "Photoshop has encountered a problem with the display driver, and has temporarily disabled enhancements which use the graphics hardware". I can use PS in safe mode. I then re-boot and can use PS normally, however after another re-boot or awakening from sleep the problem reappears.
    I have tried switching to 'Basic' or "Normal' in the advanced settings. The problem occurs again.
    I connect this laptop by VGA to an external Dell monitor, however it does not just happen when connected to the external.
    Any help in resolving this would be very much appreciated!
    Here is my help>system info log (retrieved when in safe mode after the warning message) :
    Adobe Photoshop Version: 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00) x64
    Operating System: Windows NT
    Version: 6.3
    System architecture: Intel CPU Family:6, Model:5, Stepping:1 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
    Physical processor count: 2
    Logical processor count: 4
    Processor speed: 2394 MHz
    Built-in memory: 8075 MB
    Free memory: 6625 MB
    Memory available to Photoshop: 7128 MB
    Memory used by Photoshop: 60 %
    Image tile size: 128K
    Image cache levels: 4
    The GPU Sniffer crashed on 2014-02-16 at 13:31:01
    Display: 1
    Display Bounds:=  top: 0, left: 0, bottom: 768, right: 1366
    No video card detected
    Serial number:
    Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
    Temporary file path: C:\Users\Laura\AppData\Local\Temp\
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
      Startup, 372.3G, 316.8G free
    Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
    Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
    Additional Plug-ins folder: not set
    Installed components:
       A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112  
       ACE.dll   ACE 2012/06/05-15:16:32   66.507768   66.507768
       adbeape.dll   Adobe APE 2012/01/25-10:04:55   66.1025012   66.1025012
       AdobeLinguistic.dll   Adobe Linguisitc Library   6.0.0  
       AdobeOwl.dll   Adobe Owl 2012/06/26-12:17:19   4.0.95   66.510504
       AdobePDFL.dll   PDFL 2011/12/12-16:12:37   66.419471   66.419471
       AdobePIP.dll   Adobe Product Improvement Program   6.0.0.1654  
       AdobeXMP.dll   Adobe XMP Core 2012/02/06-14:56:27   66.145661   66.145661
       AdobeXMPFiles.dll   Adobe XMP Files 2012/02/06-14:56:27   66.145661   66.145661
       AdobeXMPScript.dll   Adobe XMP Script 2012/02/06-14:56:27   66.145661   66.145661
       adobe_caps.dll   Adobe CAPS   6,0,29,0  
       AGM.dll   AGM 2012/06/05-15:16:32   66.507768   66.507768
       ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56  
       aif_core.dll   AIF   3.0   62.490293
       aif_ocl.dll   AIF   3.0   62.490293
       aif_ogl.dll   AIF   3.0   62.490293
       amtlib.dll   AMTLib (64 Bit)   6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00)   1.000000
       ARE.dll   ARE 2012/06/05-15:16:32   66.507768   66.507768
       AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
       AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
       Bib.dll   BIB 2012/06/05-15:16:32   66.507768   66.507768
       BIBUtils.dll   BIBUtils 2012/06/05-15:16:32   66.507768   66.507768
       boost_date_time.dll   DVA Product   6.0.0  
       boost_signals.dll   DVA Product   6.0.0  
       boost_system.dll   DVA Product   6.0.0  
       boost_threads.dll   DVA Product   6.0.0  
       cg.dll   NVIDIA Cg Runtime   3.0.00007  
       cgGL.dll   NVIDIA Cg Runtime   3.0.00007  
       CIT.dll   Adobe CIT   2.0.5.19287   2.0.5.19287
       CoolType.dll   CoolType 2012/06/05-15:16:32   66.507768   66.507768
       data_flow.dll   AIF   3.0   62.490293
       dvaaudiodevice.dll   DVA Product   6.0.0  
       dvacore.dll   DVA Product   6.0.0  
       dvamarshal.dll   DVA Product   6.0.0  
       dvamediatypes.dll   DVA Product   6.0.0  
       dvaplayer.dll   DVA Product   6.0.0  
       dvatransport.dll   DVA Product   6.0.0  
       dvaunittesting.dll   DVA Product   6.0.0  
       dynamiclink.dll   DVA Product   6.0.0  
       ExtendScript.dll   ExtendScript 2011/12/14-15:08:46   66.490082   66.490082
       FileInfo.dll   Adobe XMP FileInfo 2012/01/17-15:11:19   66.145433   66.145433
       filter_graph.dll   AIF   3.0   62.490293
       hydra_filters.dll   AIF   3.0   62.490293
       icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
       icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
       image_compiler.dll   AIF   3.0   62.490293
       image_flow.dll   AIF   3.0   62.490293
       image_runtime.dll   AIF   3.0   62.490293
       JP2KLib.dll   JP2KLib 2011/12/12-16:12:37   66.236923   66.236923
       libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)  
       libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0  
       LogSession.dll   LogSession   2.1.2.1640  
       mediacoreif.dll   DVA Product   6.0.0  
       MPS.dll   MPS 2012/02/03-10:33:13   66.495174   66.495174
       msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.8428  
       msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
       msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.8428  
       msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
       msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.8428  
       msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       pdfsettings.dll   Adobe PDFSettings   1.04  
       Photoshop.dll   Adobe Photoshop CS6   CS6  
       Plugin.dll   Adobe Photoshop CS6   CS6  
       PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   3.0.0.383  
       PSArt.dll   Adobe Photoshop CS6   CS6  
       PSViews.dll   Adobe Photoshop CS6   CS6  
       SCCore.dll   ScCore 2011/12/14-15:08:46   66.490082   66.490082
       ScriptUIFlex.dll   ScriptUIFlex 2011/12/14-15:08:46   66.490082   66.490082
       tbb.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406  
       tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406  
       TfFontMgr.dll   FontMgr   9.3.0.113  
       TfKernel.dll   Kernel   9.3.0.113  
       TFKGEOM.dll   Kernel Geom   9.3.0.113  
       TFUGEOM.dll   Adobe, UGeom©   9.3.0.113  
       updaternotifications.dll   Adobe Updater Notifications Library   6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   6.0.0.24
       WRServices.dll   WRServices Friday January 27 2012 13:22:12   Build 0.17112   0.17112
       wu3d.dll   U3D Writer   9.3.0.113  
    Required plug-ins:
       Accented Edges 13.0
       Adaptive Wide Angle 13.0
       ADM 3.11x01
       Angled Strokes 13.0
       Average 13.0.1 (13.0.1.3 x001)
       Bas Relief 13.0
       BMP 13.0
       Camera Raw 8.3
       Camera Raw Filter 8.3
       Chalk & Charcoal 13.0
       Charcoal 13.0
       Chrome 13.0
       Cineon 13.0.1 (13.0.1.3 x001)
       Clouds 13.0.1 (13.0.1.3 x001)
       Collada 13.0.1 (13.0.1.3 x001)
       Color Halftone 13.0
       Colored Pencil 13.0
       CompuServe GIF 13.0
       Conté Crayon 13.0
       Craquelure 13.0
       Crop and Straighten Photos 13.0.1 (13.0.1.3 x001)
       Crop and Straighten Photos Filter 13.0
       Crosshatch 13.0
       Crystallize 13.0
       Cutout 13.0
       Dark Strokes 13.0
       De-Interlace 13.0
       Difference Clouds 13.0.1 (13.0.1.3 x001)
       Diffuse Glow 13.0
       Displace 13.0
       Dry Brush 13.0
       Eazel Acquire 13.0.1 (13.0.1.3 x001)
       Embed Watermark 4.0
       Extrude 13.0
       FastCore Routines 13.0.1 (13.0.1.3 x001)
       Fibers 13.0
       Film Grain 13.0
       Filter Gallery 13.0
       Fresco 13.0
       Glass 13.0
       Glowing Edges 13.0
       Grain 13.0
       Graphic Pen 13.0
       Halftone Pattern 13.0
       HDRMergeUI 13.0
       IFF Format 13.0
       Ink Outlines 13.0
       JPEG 2000 13.0
       Lens Blur 13.0
       Lens Correction 13.0
       Lens Flare 13.0
       Liquify 13.0
       Matlab Operation 13.0.1 (13.0.1.3 x001)
       Measurement Core 13.0.1 (13.0.1.3 x001)
       Mezzotint 13.0
       MMXCore Routines 13.0.1 (13.0.1.3 x001)
       Mosaic Tiles 13.0
       Multiprocessor Support 13.0.1 (13.0.1.3 x001)
       Neon Glow 13.0
       Note Paper 13.0
       NTSC Colors 13.0.1 (13.0.1.3 x001)
       Ocean Ripple 13.0
       Oil Paint 13.0
       OpenEXR 13.0
       Paint Daubs 13.0
       Palette Knife 13.0
       Patchwork 13.0
       Paths to Illustrator 13.0
       PCX 13.0.1 (13.0.1.3 x001)
       Photocopy 13.0
       Photoshop 3D Engine 13.0.1 (13.0.1.3 x001)
       Picture Package Filter 13.0.1 (13.0.1.3 x001)
       Pinch 13.0
       Pixar 13.0.1 (13.0.1.3 x001)
       Plaster 13.0
       Plastic Wrap 13.0
       PNG 13.0
       Pointillize 13.0
       Polar Coordinates 13.0
       Portable Bit Map 13.0.1 (13.0.1.3 x001)
       Poster Edges 13.0
       Radial Blur 13.0
       Radiance 13.0.1 (13.0.1.3 x001)
       Read Watermark 4.0
       Reticulation 13.0
       Ripple 13.0
       Rough Pastels 13.0
       Save for Web 13.0
       ScriptingSupport 13.0.1
       Shear 13.0
       Smart Blur 13.0
       Smudge Stick 13.0
       Solarize 13.0.1 (13.0.1.3 x001)
       Spatter 13.0
       Spherize 13.0
       Sponge 13.0
       Sprayed Strokes 13.0
       Stained Glass 13.0
       Stamp 13.0
       Sumi-e 13.0
       Targa 13.0
       Texturizer 13.0
       Tiles 13.0
       Torn Edges 13.0
       Twirl 13.0
       Underpainting 13.0
       Vanishing Point 13.0
       Variations 13.0.1 (13.0.1.3 x001)
       Water Paper 13.0
       Watercolor 13.0
       Wave 13.0
       WIA Support 13.0.1 (13.0.1.3 x001)
       Wind 13.0
       Wireless Bitmap 13.0.1 (13.0.1.3 x001)
       ZigZag 13.0
    Optional and third party plug-ins: NONE
    Plug-ins that failed to load: NONE
    Flash:
       Mini Bridge
       Kuler
    Installed TWAIN devices: NONE
    thanks, Laura

    thanks for your reply.
    This is because PS turned off the GPU when I opened it in safe mode.
    When I can access PS normally, both cards are recognised:
    Adobe Photoshop Version: 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00) x64
    Operating System: Windows NT
    Version: 6.2
    System architecture: Intel CPU Family:6, Model:5, Stepping:1 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
    Physical processor count: 2
    Logical processor count: 4
    Processor speed: 2394 MHz
    Built-in memory: 8075 MB
    Free memory: 5594 MB
    Memory available to Photoshop: 7106 MB
    Memory used by Photoshop: 60 %
    Image tile size: 128K
    Image cache levels: 4
    The GPU Sniffer crashed on 2014-02-16 at 13:31:01
    OpenGL Drawing: Enabled.
    OpenGL Drawing Mode: Advanced
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: True.
    OpenGL Allow Old GPUs: Not Detected.
    Video Card Vendor: Intel
    Video Card Renderer: Intel(R) HD Graphics 4400
    Display: 1
    Display Bounds:=  top: 0, left: 0, bottom: 768, right: 1366
    Video Card Number: 2
    Video Card: Intel(R) HD Graphics Family
    OpenCL Unavailable
    Driver Version: 10.18.10.3345
    Driver Date: 20131031000000.000000-000
    Video Card Driver: igdumdim64.dll,igd10iumd64.dll,igd10iumd64.dll,igdumdim32,igd10iumd32,igd10iumd32
    Video Mode: 1366 x 768 x 4294967296 colors
    Video Card Caption: Intel(R) HD Graphics Family
    Video Card Memory: 2048 MB
    Video Rect Texture Size: 16384
    Video Card Number: 1
    Video Card: NVIDIA GeForce GT 740M           
    OpenCL Unavailable
    Driver Version: 9.18.13.3165
    Driver Date: 20131023000000.000000-000
    Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
    Video Mode:
    Video Card Caption: NVIDIA GeForce GT 740M           
    Video Card Memory: 2048 MB
    is uninstalling the graphics card the only fix for this? I'm reluctant to try this, and cause more problems..

  • I installed Windows 8.1 bootcamp but I'm having problems with the nvidia driver

    Windows 8.1 is boot camped and it works perfectly, Almost. Ill find myself scrolling, usually with the trackpad, sometimes with a mouse, and the screen will go black, flicker, and resume. It will also stop the driver in games when i press keys too quickly. It seems to be an input problem but i don't see how the keyboard and trackpad affect the video driver. I get an error message that says "NVIDIA driver has temporarily stopped but has recovered." I have installed the latest drivers from the NVIDIA Website as well as all windows 8.1 updates. Sometimes its bad enough that the computer reboots completely. Its getting frustrating as i can't complete tasks or enjoy recreational time. Has anyone had this issue and been able to fix it?
    NVIDIA driver fails but recovers(or Reboots computer) when
         When i scroll through webpages using the trackpad or mouse, usually when i scroll quickly
         or input keystrokes quickly while running programs, usually games
    Computer
         Macbook Pro(mid 2010)
         Intel core i5 (built in geforce 330M)
         OS X Yosemite 10.10.1
         Bootcamp 5.1.2
         Windows 8.1

    Is the current nVidia driver the one that came with Bootcamp?

  • Windows 7 - HP Laserjet 8500 print driver problem

    I have tried everything imaginable to correct this HP 8500n print driver problem with no success, please help!
    I cannot correct or get rid of a reoccurring “Incompatible Print Settings” error dialog box message that repeatedly states that “There are one or more conflicting settings. One of the settings is: Output Bin: Mailbox 1, Accessory Output Bin: Not Installed”. The radio button options are “Restore my previous settings or Keep this setting, and I will change it later”. This same dialog message repeats 13 times for all the other various conflicts each time you click on printer properties to change to 2 sided printing or any other printer settings. This printer does not have any of these features attached or set into it.
    I am a volunteer that manages a number of computers on our small church LAN, 2 computers operating on MS XP-SP3, 2 on MS Windows 7 Home Premium and my 2 problem computers that came pre-installed with Vista Home Premium of which I have performed an HP OEM upgrade to Window 7.
    I have isolated this print driver problem to the Vista operating system and even when computers are upgraded to Windows 7 does not correct this driver error. I have also tried every possible print driver variant of the HP 8500, HP8550, PCL, PS to include the Microsoft versus HP versions with no success. In each case I get this error yet neither of the XP computers or the computers that had Windows 7 as a original operating system have no problems with their print drivers for this printer.
    Yes, I have repeatedly searched and upgraded the operating system and print drivers. In desperation I have even tried to find the correctly behaving Windows 7 print driver and transfer it to these Vista upgraded to Windows 7 machines. However I could not isolate the driver location.
    The only thing I can conclude is that this errant HP print driver was resident within Vista and remains resident even after a HP OEM Windows 7 upgrade. Additionally, all of these computers are configured to access this printer via its static IP address on the network.  The XP computers are 32 bit, all of the Vista upgraded to Win 7 and OEM Win 7 computers are 64 bit machines all with respective OS. 
    Can anyone please help me correct this problem?

    Hi, 
    Unfortunately I can't see your uploaded image yet as it is awaiting approval from HP.
    From what I can see you are correct that HP does supply drivers for this printer and that the drivers for your printer are already included with Windows 7.  On the machines affected, try the procedure below to see if it helps at all
    Next download revo uninstaller on the link below and install it.
    http://www.revouninstaller.com/download-freeware-version.php
    Disconnect the printer from the PC.
    Run Revo and see if it finds any  HP Printer Software installed.  If it does, right click the software icon and select uninstall.  During the process you may be asked to delete registry entries.  If you are, just select all and click delete.  Do the same for any left over files and folders.  Once completed, reboot the PC.
    Re-connect your printer to the PC and follow the guide below.
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02536257
    If this helps you will need to repeat the process on each of the affected machines.
    Best wishes,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Every time one of my email addresses doesn't work on my mail app, due to wrong password or whatever, it deletes all of the contacts form my phone.  What can I do to stop this from happening?

    Every time one of my email addresses doesn't work on my mail app, due to wrong password or whatever, it deletes all of the contacts form my phone.  What can I do to stop this from happening?
    I have tried deleting the account and it deletes all my contacts.  I have verizon and even using back up assistant, it says the contacts are there but they aren't.  The only way i can find a contact is if I start to type a name in and new text but once i sent the new text, the name disappears and it just shows the number.  Siri nor the address book don't recognize any contacts at all.

    I cant find any reciept in my email or in my husbands email.  I am going to attempt to call and speak to someone who can help me because this was not my fault except trying to be normal and update my phone!

  • I have lost my info for my ipod due to hard drive problem. Can I upload the info on my ipod to my computer. I don't want to lose what is on my ipod.

    Lost ipod info on computer due to hard drive problem. Can I upload info on ipod back to my computer and how do i do it.

    - Transfer iTunes purchases by:
    iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
    - Transfer othe music by using a third-party program like one of those discussed here:
    Best iPod to PC
    - Create a backup of the iPod by connecting the iPod to the computer.  Right click on the iPod under Devices in iTunes and select Back Up.
    - Restore the iPod from thzt backup and sync a necessary.

Maybe you are looking for