SATA PCI Card reads Paralell now.

I have purchased and installed a Serial PCI Card that supposedly allows me to use a serial ATA hard drive. 7200 RPM, serail quickness all good things to want on my old Digital Audio. It does lalow me to see and use the newer serial hard drtive, BUT, the System Profiler registers it as a SCSI Parallel drive.
The drive itself is a Western Digital WDC WD2500JS-00N 250 gb's.
Did I purchase the wrong PCI Card or any idea of what is taking place here? Can't recall what the name of the card is or any tech data about it.
thanx,
Message was edited by: Mr Pixel

It is reporting as SCSI because it is designed to work with the SCSI disk driver software, not SATA drivers. It will run the drives at their full speed, but if the SATA drives have some functions that are not supported by SCSI, those functions will not be available. S.M.A.R.T. might be one of those functions. Does Disk Utility show S.M.A.R.T. status for those drives?

Similar Messages

Is there any SATA PCI card support G5?

since there is only 2 HDD bay inside the G5, and all of theres are full already, i'm planning to get 2 more HDD, can i just add a SATA PCI card, then simply just plug 2 more HDD with the PCI Card?

Also, you might want to look into port-multiplier solutions.
I have a PCI-X G5, so you may have different options, but I started out with a Firmtek Seritek 1VE4, with 4 external SATA connections. I have now exhausted those 4 connections, so I replaced it with a Lycom eSATA 4-port which supports multiplication (5 drives per port, for total of 20 drives)
MacGurus is very knowledgeable about the SATA expansion options for all desktop Macs.
You can get single-drive chassis, which often have eSATA, Firewire and/or USB ports, or go for a 4- or 5-tray enclosure, which often let you hotswap drives in and out.
Matt
2.5GHz|3.5GB G5, 1.5GHz|1.25GB PB12, 5G iPod Mac OS X (10.4.9)

SATA PCI card in powermac, which one?

Im looking for a SATA PCI card for a power mac and was wondering what is the cheapest option can I use any card or just ones specifically made for mac?
Any help appreciated.

A controller card plugs directly into the computer's hardware. An adapter lets you plug a SATA drive into another interface which in turn plugs into the computer. I don't have experience with either but I suspect the controller would be faster since the adapter would be limited by the speed and maybe even drive size limitations (if such) for whatever interface you were using. It depends upon the computer. For which kind are you thinking of buying one?

Bought wrong e-SATA PCI Card and seek advice on the right one to buy

I have a MacPro bought in 2006 with Intel Processor but still having the old MAC OS X 10.4.11 Tiger version.
I bought an e-SATA PCI card : http://eshop.macsales.com/item/Newer%20Technology/MXPCIE6GS2/
But I realised first that I could not insert it. The distance between the slots in the mother board and the external exit whole to fix the card and not compatible (card too short). Furthermore the card specs says that it requires max OS 5 version or later.
So what do you recommend that would go physically in the slot and at the same time fitting with my MAC OS 4.11 version ? This card is to be used to connect external drives suing e-SATA connections.

Nothing wrong with using that card in your Mac Pro. The card will fit in your MP's slots, so if you are unable to seat it then you aren't doing something correctly. The specs say the card is backward compatible with PCI-e 1.0 slots.
You will have to upgrade your OS to the requisite version. Given the cost of Leopard you may wish to instead upgrade to Snow Leopard.

Sata PCI card

I have a G4 dual 450 and would like to install a sata pci card so I can use a raid subsystem for my company. Will this G4 support the sata PCI card?

Hi! The G4 can support a SATA card though check for bootability on RAID cards. I use a Sonnet Sata card and it is bootable but the one I use is not a raid card. Tom
SATA Cards

LG GGC-H20L with Sonnet Tempo Sata Pci Card into Powermac G5

Hello dear Community.
I have a LG GGC-H20L HD-DVD/Blu Ray Drive. And a Sonnet Tempo SATA PCI Card.
The Problem is, that the Computer cant find the LG GGC-H20L Drive. The Sonnet Tempo Card it find. Broke i drivers? And where i can get it?
Can one of you Help me?

Nokiman
I made sure there was a good 'thunk' as it slotted in to the PCI slot everytime I installed it, I wiggled it to make sure, I applied reasonable pressure to make sure it was seated correctly, etc. I tried everything, short of using a hammer! Still no joy. I have a PCI firewire card which works perfectly in all slots.
I've sent it back to the supplier for a replacement/upgrade to the Tempo-X 4+4.
Thanks for the tips.
Andrew

In lightroom 5 I have been importing images via a card reader. Now you can see the images on the computer but when I try to import it says that it cannot read the card any ideas how to solve?

I have been importing images via card reader with no problem. Now all of a sudden I can see the images on the screen but when I try to import the computer says that it can not read them and quotes numbers of the images. Any idea how to solve?

Please give us the exact error message.
Please state your operating system.
Please state the exact version of Lightroom you are using.
Please give us any other relevant details.
What does this mean: "Now all of a sudden I can see the images on the screen"? Are you looking in Lightroom or your operating system or the camera screen? Where?

I renamed the card reader and now iPhoto doesn't work

i am using a card reader to upload photos to iPhoto. everything works fine until yesterday i renamed the card reader icon (the icon always says "Untitled" but i renamed it to something else) and now it doesn't read anymore. the warning says "Unreadable Files: 1" it's in unrecognized format. i wonder if it has anything to do with renaming the file. what can i do and how can it fix this?

Plearn
Welcome to the Apple user to user assistance forums
yesterday i renamed the card reader icon (the icon always says "Untitled" but i renamed it to something else) and now it doesn't read anymore. the warning says "Unreadable Files: 1" it's in unrecognized format. i wonder if it has anything to do with renaming the file. what can i do and how can it fix this?
Possibly
iPhoto does not see your card reader - it sees the card so renaming it might create a problem since you are writing to the card
Do you have photos on it you need to save? If so give image capture a try (it is in your applications folder) or use the finder -- once you have your photos off of it user your camera to reformat the card (the camera's format command) and see if that cures it (it probably will go back to untitled)
LN

MDD with SATA PCI card, what is largest drive possible?

I have recently bought a Sonnet Tempo PCI SATA card for my MDD, is there a maximum size to the SATA HDD which I can attach to this card?
I want to use it mainly to store videos etc.

If the drive is to ever be bootable, 2TB is the largest partition that you can use.
Not sure what Sonnet has tested with that card, but the Firmtek controller that it carries will support 2 TB for sure.

MBP 2010 Mavericks SATA PCI Card not working

Hello there,
with Mountain Lion I had no problems with my LaCie SATA II ExpressCard 34, but after installing Mavericks this card is not working anymore.
http://www.lacie.com/de/support/support_manifest.htm?id=10274
I contacted Lacie Support, they do not have an actual driver.
So I bought a Sonnett Tempo SATA Pro 6Gb ExpressCard/34 which should work with Mavericks.
Unfortunately my MBP from 2010 does not. Sonnett offers a workaround http://www.sonnettech.com/support/kb/kb.php?cat=466&expand=_a3_a1_a2&action=b778 #b778
After installing this I could use the card when I plugged it in AFTER systemstart. If the card is plugged in when the computer is started, the compter will not start at all. So, if I like to use an external drive as startvolume with this card, it is useless.
Does anybody have the same problem and any solution?
Will there be an update for Mavericks regarding this problem?
Thanks for Feedback

I can't offer any solutions, my MBP doesn't have an Expresscard slot, but it seems like no one else has answered so I thought I'd offer a suggestion. Contact Other World Computing at Macsales.com. They specialize in Mac hardware and may be able to supply you with a card that works.
As for the "will there be an update" question, we're all just users here so we have no idea what Apple will do.

MOVED: k7n7 Delta ILSR - Sata problem / win7 / SATA PCi card / onboard SATA

This topic has been moved to Windows 7.
https://forum-en.msi.com/index.php?topic=130001.0

:angryfire:Still having no joy trying to get this sata drive to boot on its own done everything in the manuel and in the forums as stated in my first post and deathstalkers post and still nothing aint nothing wrong with my mobo or hdd please help has anyone had this problem i fear even with the Pheonix Award bois v7.8 which i have doesnt support the boot from scsi since it will not boot even when ive made the array and made it bootable and set the scsi to the second boot device and installed winxp from the cd it just keeps on restarting
any help ei someone with a similar setup to me tell me everything they did in the bios settings would be a bonuse think i am missing something else besides the normal procedure any help will be most welcomed
thanks all
Dave

M-Audio Audiophile 2496 PCI card installed, now computer will not turn off

I installed Audiophile 2496 card + "live lite 4" software and now my computer will not turn off. It goes through the motions, but than just reboots. I have to hold the start button to kill it. I also have a Firmtek SATA PCI card and a USB 2.0 PCI card. Is there some way to solve this short of pulling the card?

Hi-
Do you have the proper driver version installed?
http://www.macupdate.com/info.php/id/13585

Problem with NEO2 and sata controller card

1.Product Type: MSI K8N Neo2 Platinum (MS-7025)
and the controller card is a InnoVision DM-8301 and the hard drive is a Seagate ST3320620AS
2.BIOS version: The newest one, 1C0 or something.
3.External VGA Type: Geforce 6800 GT
4.CPU Type: AMD 64 3500+
5.Memory Type: G Skill ZX 2048mb.
6.Power Supply Type:
7.Operating System: Xp Pro
8.Problem Description:
Hello. I have a strange problem with my controllercard. I wrote this text to InnoVision suport and they send me files and bios updates for a whole week and it was still the same problem. And then i tried the card in an older computer and everything worked fine.
I wrote
"Hello. I got some problems with my new controller card. I can find my new harddrive ,that's conected to the controller card, when iam inside windows and it's seems to be no problem. I can look on every seting on it and everywhere i look i can read "No problem". I Also did some test with the seatools programe and everything was fine. But when i schould copy files to it the coumputer start lagging after a few seconds and i cant do anything. After a while i can move the mouse around but the it laggs again. My computer is overclocked at the time but i have tried to use the harddrive when it's not clocked also. Also when im goin in to teh controlpanel and starts the setings for Sillicon Images sata controll and have music on my computer, the music laggs for a very very short moment. Something must be wrong and i can not find it."
It's still the same problem in my computer. The older computer had a MSI moderboard with a VIA chip and i have a nForce 3. InnoVison said i should talk to you about this problem. I have 3 harddrives but i use this controllercard because i want to have my computer overclocked and then i can't use 2 of the sata ports as i think you know.
I would be very thankful if you could help me with this problem.
//Martin

I've used a noname SATA pci card (non raid) with SIL3112 on my neo2 without problems with 1C bios.
Think you may try with a disk lower than 48bitLBA need (137GB barrier), eg a 120GB disk
Quote:
have the InnoVision EIO DM-8301 and had alot of problems using it with WD 160MB SATA drive.
I am using Intel 865 based MB with 2 original SATA channels. The original SATA channels are bootable.
I could not used the EIO card with 160G HDD. The whole setup is working only after I connected oine of my 120G Segate SATA HDD to the EIO Sata card.
I think this card do not properly support HDD above 120G.
Please respond to: [email protected]
http://www.devhardware.com/forums/storage-devices-80/sata-as-boot-20080-2.html
Btw: you have xp sp2 ?
48bitLBA is not enabled in the first version.
http://www.48bitlba.com/winxp.htm
Edit:
Here's another with complete different setup and same problems
http://forum.tweakxp.com/forum/Topic212148-4-1.aspx
I doubt it has anything to do with your motherboard and/or bios.
Btw: I looked at innovision and their drivers in download area are very old.
Get the latest SIL3112 drivers for XP here:
http://www.siliconimage.com/support/supportsearchresults.aspx?pid=63&cid=3&ctid=2&osid=4&
And remember 3112 is sata150 only , so it's not sure it will work with your drive at all .
Anyway it should be set to fixed sata1.5G with jumper - not certain the controller can autonegotiate
without trouble. You cannot have command queing enabled either , disk support only NCQ and controller TCQ
so having command queing set ON will cause major conflicts in data transfers.

SD Card Reader issue

I've read a slew of posts on this issue, and tried the fixes to no avail. My card reader was working (first time ever used) on Aug 2.
On Aug 3, it's not working.
I've tried 3 different cards in it that all work in other devices. I've tried micro sd as well as standard size sd cards.I bought this system on Dec 2, 2014 preloaded with Windows 8.1. My system is completely up to date on its Windows Updates. (I hid the windows ten thingy because I don't want it til they get the problems worked out) It's a C75D-B7260Toshiba Part # PSCLEU-003002The current driver for the RealTek PCIE card reader is 10.0.10130.29089 dated 6-1-2015. I've completely uninstalled thru device manager and then rebooted and reinstalled, which goes successfully. It's always appeared as a device in device manager - but still nothing. I've also tried just disabling, then enabling. Still Nothing. This is the 6th Toshiba I've purchased over many years, and the first one to give me issues like this. I've never called toshiba tech support and now I find out that I have to pay for it if I do?? ABSURD on an issue like this. HELP!! Is it possible that this link might help someone with this? If so, please tell me step by step how to get this installed from the windows KB. MSKB No activity when card inserted

Jerry_Lippey wrote:
You could also Refresh Windows, of course. But that would involve reinstalling programs. Upgrading to Windows 10 is another possibility.In 30 years of computing (started with the C64) I've never had to restore a system back to "out of the box" status. That scares me more than dealing with the registry, and I know it's just the opposite for most people. I haven't stayed up with the industry in the past 5-6 years so I feel kind of lost when it comes to laptops, tablets and such. I've never had one apart, whereas I've had desktop systems in pieces on the dining room table while building or fixing. Reinstalling certain programs is a royal pain, so I pass on that option for now. As for win 10, no way am I putting that on my system until they get the bugs worked out. Some are having big troubles, and some are gliding thru just fine. Issues with nvidia equipment, task bar issues and more that I'm not willing to deal with. I already uninstalled KB3035583 and turned off automatic update installs to try and avoid MS 'pushing' 10 on me until I want it. Teri

Real Life SATA-PCI speed of PowerMac G4s

I see people on the web talking about what super speeds they get from their SATA Drives hooked up to SATA-PCI-Cards (Sonnet, Firmtek, Acard, doesn't matter) in their G4s.
Since I only get 33-39MB/s depending on what drive I use, I suspect they just use benchmark tools or I am an idiot. (copying from one drive to another both hanging on the same PCI-Card).
Please, can someone use a real file and copy it manually from one SATA-Drive to another and use a "stop watch" and calculate the file size through the time elapsed in seconds.
It does not matter, if I use a file of 5GB, 20GB or files of 800GB. No matter which SATA-PCI card I use (have kept me a Sonnet and a Macally). No matter if both are installed or just one.
Would really appreciate your help.

@ all:
First thank you, all! You make me confident, that it is not me making a mistake somewhere (I can't imagine what mistake anyway since it is plug and play. But people elsewhere like to point out, that the user is the biggest source of mistakes).
What I ask myself again is:
why then, are people claiming that they get 100MB/s speeds on the same PowerMac G4 Sawtooth ("AGP", with 100MHz-BUS)? I trust Japamac, that he did do tests, but what really comes to mind is, that it must be the benchmark utilities (Quickbench and ALA) making people think they have 100MB/s speeds on a theoretical SATA-150MB connection.
Btw. I have tried the 500MHz stock CPU, a Sonnet 7447 2x1,8GHz and a Sonnet 1x1,2GHz 7455, I could see that the 500MHz CPU is overal 5MB slower, when processing large files. 5MB is not siginficant, I know.
I am not saying, that a Dual 1,8GHz is making everything different and neglecting what you said, when you just transfer files and I see that the CPU is somehow oversized on a 100MHz FSB. Of course people swear their Upgrade CPUs do much. I guess they really roll out their advantages in let's say converting DV-files to another format. (I plan to test this the next weeks btw., also watching power consumption).
Thank you again. I hope Japamac says something on the topic, since he still posses his Sawtooth G4 and maybe he can reperform his test with a real file (other than "virtual" benchmarking). A pitty that there is no message function on this forum.
PS: on RAM usage, other than music authoring software and photoshop, RAM doesn't seem to be that big of a deal on a PowerMac. I watched activity monitor, while converting an iMovie-file to h.264 (took like 8 hours with the Dual 1,8GHz), the RAM was never filled over 512MB and I have 2GB installed. OS X is very nice to RAM, too it seems.

SATA PCI Card reads Paralell now.

Similar Messages

Maybe you are looking for