Satallite A100: How to replace the keycaps?

Is there a manual on how to replace the keycaps after they come off?
My Satallite A100, one year old, lost two keycaps a few weeks ago, and I am unable to replace them, although I have all the (little) parts. It got even worse when some more came loose recently when my little son peeled some off, using the room created by the already missing keycaps.
Thanks!

Hello Mike
Reading your posting I can not understand exactly what is wrong with your keyboard but removing and putting in place keycaps (plastic with written symbol) is not problematic. You must just put it right in place and gently press it down. You will hear click and the keycap will be in the place again.
Under this keycap is placed small plastic mechanism. It contains two small plastic parts. If they are removed from the bottom you can put them inside again. To see how it looks like remove keycap from any other key and see how is it placed.
I have done the same now and with a little bit patience you can put it in the right position again.

Similar Messages

How to replace the root tag in ABAP Mapping

how to replace the root tag with the certain string in ABAP Mapping
just like
<?xml version="1.0" encoding="UTF-8"?>
<root>
<name>Lawrence</name>
</root>
into
<?xml version="1.0" encoding="UTF-8"?>
<myRootElement>
<name>Lawrence</name>
</myRootElement>
i don't want to implement it in message mapping
please give me the sample code
thanks in advance

Use below code
odocument = ixmlfactory->create_document( ).
msgtype = odocument->create_simple_element(
name = 'myRootElement'
parent = odocument ).
Thanks
Praveen

Qosmio G50-10J: How to replace the Optical Disc Drive (ODD)?

Hello there,
the optical drive of my Qosmio G 50 is not working properly anymore, it reads only some movie-DVDs, but sadly no videogameDVDs at all, so I cannot instal any games.
The warranty has already expired too. So I wanted to ask if it is possible to change the drive myself, if it is then how should I do it, and if by doing it would the laptop be in
serious risk of getting damaged?
I would be very thankful for every tip and every help you guys can give me!!!
Best regards,
a.z.

Hi
In different cases the ODD replacement is not very tricky.
If you want you can check this forum category.
Here you can find some videos how to replace the ODD on different notebook models:
http://forums.computers.toshiba-europe.com/forums/forum.jspa?forumID=115
Here is also a nice Youtube channel which provides the instructions how to replace the ODD:
http://www.youtube.com/user/toshibaeuropesupport
But maybe the ODD laser lens is dirty. In my case I could solve similar issue cleaning the laser lens using a cotton-wool tip and alcohol.
But be careful doing this!

How to replace the certificate of Cisco 2106 wireless LAN controller for CAPWAP ?

I have interested in CAPWAP feature and I download the open capwap project to make Access Controller (AC) and Wireless Terminal Point (WTP). I had built the AC which used PC and WTP which used Atheros AP. The CAPWAP feature work well when I enabled the CAPWAP that used my own AC and WTP. When I got the Cisco 2106 wireless LAN controller (Cisco WLC), I configured the Cisco WLC to instead my own AC but I got the authorize fail in Cisco WLC side. It seem the Cisco WLC could not recognize the CAPWAP message which sent form my own WTP. I think this issue just need to synchronize the certificate between Cisco WLC and WTP.So I need to replace the Cisco WLC's certificate manually. Does anyone know how to replace the certificate manually with Cisco WLC ?
Best Regards,
Alan

Unfortunately this Support Community is for Cisco Small Business & Small Business Pro product offerings. The WLC2106 is a traditional Cisco product. You can find this type of support on the Cisco NetPro Forum for all traditional Cisco products.
Best Regards,
Glenn

How to replace the char values into numeric in my string?

Hi Friends,
I would like to Replace the Charecter values with numeric value in my string.
Exp : first in my string I am having the value like this : 'ABCD1234' ( may be any char and num values ), and I want too get it by '99991234'.
I mean How to replace the char values into numeric in my string?
Thanks,
Sridhar

Hi Sridhar,
I would like to Replace the Charecter values with numeric value in my string.
Exp : first in my string I am having the value like this : 'ABCD1234' ( may be any char and num values ), and I want too get it by '99991234'.
So, if i understand you correctly, you want to replace all characters in a string with 9 as in the above example, irrespective of position of the character, if so try with the below code.
DATA: l_str TYPE string.
l_str = 'ASKHSIUDNSBDKJSDH124312431243124saasdfsf'.
REPLACE ALL OCCURRENCES OF REGEX '\D' IN l_str WITH '9'.
IF sy-subrc EQ 0.
WRITE: l_str. "Result will be 9999999999999999912431243124312499999999
ENDIF.
Regards,
Chen
Edited by: Chen K V on Jun 13, 2011 12:36 PM

Hp 7 voice tab screen broken unfortunately. tab is under warrenty.. how to replace the screen

hp 7 voice tab screen broken unfortunately. tab is under warrenty.. how to replace the screen

Hp india have bad service ever. I hv order three notebooks ' hp 15-ac026tx' before five days for firm. Distributior open the boxes. But at the time of installation not single driver supporting to 2gb graphics card. As distributor made with Hp support they replied the engineer will come to ur place soon. But still no one has come. And im going to cancel this order and will prefer other compony.

How to replace the icon in the title bar and minimized window

I am not sure if this is a Swing question. But since nobody answered it in the Java Programming forum, let me place it here:
I would like to set my own icon in the title bar and in the minimized window of my java application, replacing the java coffee cup icon.
I am using:
frame.setIconImage(new ImageIcon("image.gif").getImage())
as was suggested previously in the Java Programming forum at:
http://forum.java.sun.com/thread.jspa?forumID=31&threadID=5212059
This does create the icon in both places. However, it only works when I run the program from JBuilder 2006. It doesn't work if I run the program from the .jar or the .exe file.
How can I make it work for my .jar and .exe file?
Please help! Thanks!

It doesn't work if I run the program from the .jar...working example for a .jar
import javax.swing.*;
import java.awt.*;
class Testing
public void buildGUI()
    JFrame f = new JFrame();
    Image img;
    try
      java.net.URL url = new java.net.URL(getClass().getResource("Save.gif"), "Save.gif");//correct capitalization required
      if (url != null)
        img = javax.imageio.ImageIO.read(url);
        f.setIconImage(img);
    catch(Exception e){}//do nothing - default will display
    f.setSize(200,200);
    f.setLocationRelativeTo(null);
    f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    f.setVisible(true);
public static void main(String[] args)
    SwingUtilities.invokeLater(new Runnable(){
      public void run(){
        new Testing().buildGUI();
}

How to replace the string in a file

Hi, I have a file which contains the following data
File.dat
<file>
<filenum>
W10
</filenum>
<hello>Heading </hello>
</file>
I need to replace the contents of file.dat
database sequence value (for example xx_seq.nextval)
Can some one please tell me how to search this <filenum>
W10</filenum>
and replace this with xx_seq.nextval
and write the entire contents of the file to new file
I am doing some thing like this
suppose if my database value returns 11 from the above sequence then
the output should be in file2.dat as
<file>
<filenum>
11</filenum>
<hello>Heading </hello>
</file>
declare f_in utl_file.file_type;
s_in varchar2(10000);
string1 varchar2(32000);
x number;
begin
f_in := utl_file.fopen('SAMPLEDIR','input.txt','R');
f_in1 := utl_file.fopen('SAMPLEDIR','input1.txt','W');
select xx_seq.nextval into x from dual;
loop
begin utl_file.get_line(f_in,s_in);
EXCEPTION
WHEN NO_DATA_FOUND THEN
EXIT;
string1:= string1 || s_in;
utl_file.put_line( (f_in1,s_in);
end;
end loop;
utl_file.fclose(f_in);
end;
In this case it is reading and writing as it is, but unable to replace the sequence value
Can some one please tell me how to do using replace function
Thanks

Hi, I have tried this but getting error
step 1: create table test_dept(dno number, dname varchar2(20))
insert into test_dept values(10,'10-Sourcing dept');
insert into test_dept values(20,'20-Audting dept');
insert into test_dept values(30,'30-Computer dept');
select * from test_dept;
DNO DNaME
10     10-Sourcing dept
30     30-Computer dept
20     20-Audting dept
step 2:
create table test_web (name varchar2(60), xml_col xmltype) ;
step 3:
create sequence test1_seq start with 100 increment by 1
step 4:
test.out has the following contents (it is not .xml file) and i dont have <?xml version="1.0" ?> tag at the begining
<File>
<File_Type>Type1</File_Type>
<File_Header_Record>
<file_num>WP10</file_num>
</File_Header_Record>
<Transaction>
<Transaction_Type>TR 1</Transaction_Type>
<Amount>
<Amounts>100</Amounts>
</Amount>
<Depts>
<Dept_Type>Sourcing</Dept_Type>
<Dept>10</Dept>
</Depts>
</Transaction>
<Transaction>
<Transaction_Type>TR 2</Transaction_Type>
<Amount>
<Amounts>200</Amounts>
</Amount>
<Depts>
<Dept_Type>Auditing</Dept_Type>
<Dept>20</Dept>
</Depts>
</Transaction>
<Transaction>
<Transaction_Type>TR 3</Transaction_Type>
<Amount>
<Amounts>300</Amounts>
</Amount>
<Depts>
<Dept_Type>Computer</Dept_Type>
<Dept>30</Dept>
</Depts>
</Transaction>
</File>
step 5:
DECLARE
v_check_file_exist BOOLEAN;
v_file_length NUMBER;
v_block_size NUMBER;
v_file_path VARCHAR2 (100);
v_file_name VARCHAR2 (100);
v_file_type UTL_FILE.FILE_TYPE;
v_str varchar2 (32760);
v_cnt number;
v_seq number;
--check whether file exists and has data in it
BEGIN
v_file_path := '/usr/tmp';
v_file_name := 'test.xml.out';
-- initailise the variables
v_cnt := 0;
UTL_FILE.FGETATTR (v_file_path,
v_file_name,
v_check_file_exist,
v_file_length,
v_block_size);
if v_check_file_exist
then
DBMS_OUTPUT.put_line (' File exists');
IF v_file_length > 0 AND v_block_size > 0
THEN
BEGIN
select test1_seq.nextval into v_seq from dual;
insert into test_web values(v_seq,v_file_name);
EXCEPTION
WHEN NO_DATA_FOUND
THEN
DBMS_OUTPUT.put_line ('No data found '||SQLERRM);
WHEN OTHERS
THEN
DBMS_OUTPUT.put_line ('others '||SQLERRM);
END;
commit;
ELSE
DBMS_OUTPUT.put_line ('No Data in File');
END IF;
ELSE
DBMS_OUTPUT.put_line (' File Not Available');
END IF;
END;
I am getting below error
File exists
others ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML
processing
LPX-00210: expected '<' instead of 't'
Error at line 1
My requirement is to replace the
1. contents of the file WP10 from <file_num>WP10</file_num>
with sequence value 'WP101' because sequence is starting at 100
2. Replace all Dept tag <Dept>30</Dept> with Dname value from test_dept table
for example
<Dept>10</Dept> should be replaced with <Dept>10-Sourcing dept</Dept>
update the
when i say select * from test_web;
It should contain this row
101 <File>
<File_Type>Type1</File_Type>
<File_Header_Record>
<file_num>WP101</file_num>
</File_Header_Record>
<Transaction>
<Transaction_Type>TR 1</Transaction_Type>
<Amount>
<Amounts>100</Amounts>
</Amount>
<Depts>
<Dept_Type>Sourcing</Dept_Type>
<Dept>10-Sourcing dept</Dept>
</Depts>
</Transaction>
<Transaction>
<Transaction_Type>TR 2</Transaction_Type>
<Amount>
<Amounts>200</Amounts>
</Amount>
<Depts>
<Dept_Type>Auditing</Dept_Type>
<Dept>20-Audting dept</Dept>
</Depts>
</Transaction>
<Transaction>
<Transaction_Type>TR 3</Transaction_Type>
<Amount>
<Amounts>300</Amounts>
</Amount>
<Depts>
<Dept_Type>Computer</Dept_Type>
<Dept>30-Computer dept</Dept>
</Depts>
</Transaction>
</File>
Can you please check
Thanks

How to replace the harddrive in the TV

I was wondering if i could take the HD out and image the drive so that i can put in a 1TB drive.
i understand that apple will eventually update these poor things to a 2008-2009 spec, but if they don't i'd like to buy the cheaper one and replace the drive so that i'm not always deleting and downloading things all the time.
HD movies are going to fill these weee little drives in not time flat.

i'm sure you can do this, however as this is an official apple support forum you would not be able to get the information here.
google will most likely give you instructions on how to do that.

How to replace the '&' character with '&' in xi

Hi,
i need to replace the '&' character with ' &'.but i f i am converting it is displaying as '&' because internally '&' = '&'.
beacuse of this it is not converting.
is there any possiblity to change the standard conversion in xi.

Graphical mapping does not support special character like & , <,> to be mapped.
You can encode & as and in UTF-8 only.
if you want the special character to be used, Opt XSLT mapping with ISO-8859-1 encoding
<xsl:stylesheet version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output method="xml" encoding="ISO-8859-1"/>
<xsl:template match="/">
<xsl:copy-of select="*" />
</xsl:template>
</xsl:stylesheet>
How to Work with Character Encodings in Process Integration (NW7.0)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/502991a2-45d9-2910-d99f-8aba5d79fb42

How to replace the LabVIEW icon in the upper left corner of panels?

Hi Gang,
We're going to create an application that will go to customers. We want to replace the LabVIEW icon in the upper left corner of panels with the company logo. How do I replace that?
All responses will be appreciated.
Thanks in Advance,
Roger
Solved!
Go to Solution.

As rolfk said, edit the icon in the build specification.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Edit EXE Icon.png ‏36 KB

How to replace the hinge for g410?

How do I replace the g410 hinges myself?

due to lenovo didn't provide any hardware maintenance manual, i don't think i'll be able to help you.

How to replace the arrow with a custom graphic on a TitledPane?

The TitledPane has an arrow that changes state (rotates) to show whether the pane is collapsed or expanded. Is there a way to replace this arrow with a custom graphic for each state?

Most definitely. Everything in the controls is style-able from CSS. The region you are attempting to style can be addressed via:
.titled-pane > .title > .arrow-buttonSo you could specify images here for example, or you can just change the arrow path by adding another > .arrow on the end. Below I've posted the entire CSS style that is built in for TitledPane so you can see how the whole thing is styled. You can create your own stylesheet, copy/paste this in there, and then start tweaking things and see how it affects the look of the TitledPane.
Cheers
Richard
* TitledPane                                                                  *
.titled-pane {
    -fx-skin: "com.sun.javafx.scene.control.skin.TitledPaneSkin";
.titled-pane > .title {
    -fx-background-color: -fx-box-border, -fx-inner-border, -fx-body-color;
    -fx-background-insets: 0, 1, 2;
    -fx-background-radius: 5 5 0 0, 4 4 0 0, 3 3 0 0;
    -fx-padding: 0.166667em 0.833333em 0.25em 0.833333em; /* 2 10 3 10 */
.titled-pane > .title > .arrow-button {
    -fx-background-color: null;
    -fx-background-insets: 0;
    -fx-background-radius: 0;
    -fx-padding: 0.0em 0.25em 0.0em 0.0em; /* 0 3 0 0 */
.titled-pane > .title > .arrow-button .arrow {
    -fx-background-color: -fx-mark-highlight-color, -fx-mark-color;
    -fx-background-insets: 1 0 -1 0, 0;
    -fx-padding: 0.25em 0.3125em 0.25em 0.3125em; /* 3 3.75 3 3.75 */
    -fx-shape: "M 0 0 h 7 l -3.5 4 z";
.titled-pane:collapsed > .title > .arrow-button .arrow {
    -fx-rotate: -90;
.titled-pane > *.content {
    -fx-background-color:
        -fx-box-border,
        linear-gradient(to bottom, derive(-fx-color,-02%), derive(-fx-color,65%) 12%, derive(-fx-color,23%) 88%, derive(-fx-color,50%) 99%, -fx-box-border);
    -fx-background-insets: 0, 0 1 1 1;
    -fx-padding: 0.167em;
.titled-pane:focused > .title {
    -fx-color: -fx-focus-color;
.titled-pane:focused > .title > .text {
    -fx-text-fill: white;
.titled-pane:focused > .title > .arrow-button .arrow {
    -fx-background-color: white;
}

Pavilion 17-f084nf. Need instructions on how to replace the hard drive

I do not understand how to get to the innards Series 17-f000. I want to replace the HDD and RAM. There is a manual?
This question was solved.
View Solution.

Maintenence & Service Guide
See chapter 5 and 6. You may have to remove up to 83 screws. Get yourself a tray or paper and lay out how and where the screws go in. An alternative is to take digital photos at each steps.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

How to replac the BIOS battery on notebook MSI GE70

I need to replace the BIOS battery to time but I cannot see any guide how to find it ? Do you have any pointers ?
Thanks!

https://forum-en.msi.com/faq/article/ge70
The yellow thing under the wireless card.

Satallite A100: How to replace the keycaps?

Similar Messages

Maybe you are looking for