Satatus of Data in Bex Analyzer

Hello ,
is it possible to hide "status of data" in bex analyzer ? I have read some documents but all are say it is only possible with Web Designer.
I have a query from a Multiprovider and I don't wnt to show Status of data information in the report .
thank you ,
blue

You can goto design mode in the workbook and delete the text element which is showing status of data, come out of design mode and save the workbook.
Edited by: Pravender on May 18, 2010 2:19 PM

Similar Messages

No data in Portal Report but have data in Bex Analyzer

Hi experts,
I have problem regarding portal reports. When you view the report using the bex analyzer, there is data. But when you view the report in the portal from iview, there is no data.
Please help experts.
Thanks

Hi Emmanuel (that's weird, I am an Emmanuel too! and we both have Filo origins),
There can be heaps of reasons for this.
1) Please try to run the query in transaction RSRT by entering the query name and clicking "Java Web". See if that gives you results. If that gives your results, then the iView that was saved in the portal might need some reconfiguration. Check it out.
2) Check the logic of your user exit variables. The sequence of the I_STEP calls is a bit different if you run a query in the Portal. For example, if you don't have a mandatory variable in your query, then the olap engine will call I_STEP=1 to 3 before it shows the variable screen. This behaviour is not documented in help.sap.com. However, it does work that way.
3) Try to check the caching settings for your iView. It might be caching the result. You can change this in Content Administration in the portal.
Try the above and see if it helps. Otherwise, post another message.
Cheers.

Missing Row Data on BEX Analyzer Report

Hi, been a while since I used BEX Analyzer. Have a BEX Query that we added a row of data to and the results show the row populated in Query Designer. However, when I open up a workbook in BEX analyzer that uses that query, the row still does not show up. What do I have to do to make the row of data show up?
Thanks.

Hi Keith,
I am not sitting in front of system now,but there are three checks which needs to be done. there is one refresh on every opening option also which needs to be selected.
Thanks and regards

How to show delivery date in Bex Analyzer

Hi Gurus!
I have to create a report in logistic scenario and my client wants that the report shows a column with the "Scheduled delivery date". I don't know how to show it in a column because in my KF structure, I can't put just this time characteristic.
Does anybody know how can I solve it?
Many thanks!

Hi,
Create a Formula Variable on Scheduled DeliveryDate with processing as replacement path, replace variable with InfoObject, replace with Key and use it in the new formula in the columns.
in this way query designer will accept you to use the char as in column,
hope it helps you.
Regards
Reddy A

Bex Analyzer not showing unicode data correctly

Hi all,
we are currently testing unicode data with BW.
when desplaying the data in BEx Analyzer 3.5 there is some data that sows as #. not all.
The connection from BW tosource is unicode and the other side around.
The data is stored as unicode in BW - checking the infoobject masterdata, data displays correctly.
RSRT displays the data correctly - all unicode characters display correctly.
we also made a analyzer 7.0 query which also displays the data correctly.
BEx web also returns the 3.5 query correctly.
Does anyone encountered this in the past or knows why this is happening? the problem is clearly only with bex analyzer 3.5
i am using gui 7.20 with SAP BW 3.5 AddOn Patch 5 for GUI 7.20 patch.

Jason-
We had exactly the same issue. The problem is not in the SAP system, it's in the MS Excel language system. Microsoft does not like to be set up for more than one language. Most users set up their computer for one language. So set up your test computer for... for example, Chinese. Allow English. Log in to Bex in Chinese, and execute your report. You should see Chinese characters, and you may also see English characters as well.
Please note also that if the characteristic text is not maintained in more than one language, you will see the key value instead of the text value. this can become an annoying issue.. for example, we had to write an exit in the datasource so that the customer name (in the communication language) was returned in every single installed langauge to the master data text.
Good luck !

Issue with status of data information in Bex analyzer report

Hi BI gurus,
One of the queries showing older date for the "status of data" information in the report of Bex Analyzer. I have tried to correct it in Bex analyzer by removing existing Text information element and adding a new Text element in the Bex Analyzer designer for the query. But it doesn't worked out as the changes made to the query through Bex Analyzer are only being saved as a local work book rather than reflecting to the query. Please suggest me with some options to resolve this issue and give any Idea to correct the "Status of data" in the Bex Query designer.

Hi Aditya
This is a common problem faced by users when reporting on Multi-Provider.
In my project what I did to overcome this is to run a Fake DTP to the cube whose status is creating problem.
Like , if under MultiPro I have a planning cube which is only updated monthly but all the actual cubes updated daily. In this case create a DTP under Plan cube with some impossible selection condition ( like fiscal year 2099). This will bring 0 records to planning cube ( and thereby not impacting the data) but will update the last loading time.
Regards
Anindya

Passing a range of dates from Visual Composer 7.0 to Bex Analyzer

Dear Experts,
         I created a button in my Visual Composer model that has the following settings:
System action: Hyperlink
Apply to: Self
Hyperlink address: "...QUERY=BMMSEG_C01_SAS_Q0001&BI_COMMAND_1-BI_COMMAND_TYPE=SET_SELECTION_STATE&BI_COMMAND_1-TARGET_DATA_PROVIDER_REF_LIST-TARGET_DATA_PROVIDER_REF_1=DP_1&BI_COMMAND_1-CHARACTERISTICS_SELECTIONS-CHARACTERISTIC_SELECTIONS_1-CHARACTERISTIC=MBUDAT&BI_COMMAND_1-CHARACTERISTICS_SELECTIONS-CHARACTERISTIC_SELECTIONS_1-SELECTIONS-SELECTION_1-SELECTION_INPUT_STRING=08/22/2006;08/28/2006"
        Basically, what I need is to pass a range of dates from Visual Composer to Bex Analyzer on the characteristic "MBUDAT". However, it only brings back the data with those specific dates, not the range.
      I don't think this is the correct syntax to pass in a range value: 08/22/2006;08/28/2006 Please advise how should I do it.
Thank you in advance,
Kevin

Hi J GOEL,
       Thank you for your quick response. I created a date range variable ZPSTDAT, and then I passed in the oncatenated value to my Bex query (for this example, let says the From date is 08/22/2006, and the To date is 08/28/2006 ).
      Here's what I passed in into the url:
...QUERY= BMMSEG_C01_SAS_Q0001
&BI_COMMAND_1-BI_COMMAND_TYPE=SET_SELECTION_STATE
&BI_COMMAND_1-TARGET_DATA_PROVIDER_REF_LIST-TARGET_DATA_PROVIDER_REF_1=DP_1
&BI_COMMAND_1-CHARACTERISTICS_SELECTIONS-CHARACTERISTIC_SELECTIONS_1-CHARACTERISTIC= ZPSTDAT
&BI_COMMAND_1-CHARACTERISTICS_SELECTIONS-CHARACTERISTIC_SELECTIONS_1-SELECTIONS-SELECTION_1-SELECTION_INPUT_STRING= 08/22/2006:08/28/2006
   However, it returns all the records, so it seems like it doesn't even accept the range value that I passed into the Bex. Do you mind to please show me the url you have that pass in the date range. I just need to see the date range part, not the entire url.
Thanks,
Kevin

Problems with dynamic data slices and BEx Analyzer

Hello experts,
we use a data slice to lock released data.
This data slice contains an exit-variable which selects all plan that are already released out of a ABAP dictionary table.
The user can release data via planning function. He can start this function with a button in a BEx workbook.
He use the same workbook for insert planning data.
the problem is:
when a user releases data, the value of the exit variable in our data slice changes but the data slice 9999 seems to be NOT generated with the new value. the reuslt is, that the user can still change released data.
the data slice is just new generated after logout and login again not after refresh the query.
Is there a possibility to force the system to generate data slice 9999 with the actual value of the exit variable? maybe a function module or method?
We have this problem just in BEx Analyzer. In Web Reporting everything works fine and the data is locked by the data slice after refresh.
Thank you
Johannes

Hallo Johannes,
if you want to have this kind of behaviour you need to go for a data slice of type exit. You will find some information about this in the Planning forum.
The data slice is instantiated once, but when you release the data you need to call a method in your exit data slice which rereads the values. This is a rough idea how this could be done.
Regards Matthias Nutt
SAP Consulting Switzerland

BEx Analyzer Error "NO APPLICATION DATA FOUND".

Hello Experts,
I have a problem, when i am going to create a query in BEx analyzer.
I got this Error "NO APPLICATION DATA FOUND".
I already check that Particular InfoCube, The Cube is fine and also it contains Data.
But the Problem begins Same.
Thankyou,
Kshitij Deshmukh

Hello,
I have solved this problem on my own.
Solution: 1st check your target over query is excuting...there is data or no... in Tcode "LISTCUBE".
Then data is available... or not.
If every thing is ok...then dorp the query....create anothor and checked by only 2 fields....if is working then ....comptele it.....if data is there then no problem....report should run...
check ur data is ready for reproting.... i means reporting icon is available or not.????
If the Problem begin Same "NO APPLICABLE DATA FOUND".
Then the Problem in Loading.
2. Click on cube choose manage tab...there will be reproting symbol....
Need to check each steps if data is there or Report not running....
Finally delete the request then again load the data..and icon should come automatically...
3. There is R and below one excel sheet fighre...icon
4. Go and make a Report in BEx Analayzer..
Data will fetching Automatically....
Thank you
Regards
Kshitij Deshmukh

APD read data from Web Analyzer or BEx Analyzer?

Dears,
We are on SAP BI7.0, recently we upgraded to enhancement package1. SInce then, "suppress zeros (all values=0)" setting in the query is not working properly in Web Analyzer while it's working correctly in BEx Analyzer.
We are transfering data from this query to a table in CRM system usin APD. In CRM system, we are getting the output as in web analyzer (it contains zero value records).
My questions are -
1. Do APDs always read values from Web analyzer or we have some setting somewhere? (can we read from BEx Analyzer also?)
2. What exactly is the background process sequence which is followed when an APD is executed?
Your help is really appreciated.
Thanks in advance.

When we execute APD , MDX statement generated and which will execute and bring data from the data targets .
Bex Query Conditions will not be applied to the MDX statements, we need to filter those records in the APD process , using ABAP program Process or any other filter process ..
Ravi

Publishing BEx Analyzer data in Portal

Hi,
Does anyone have experience with publishing BEx Analyzer data in Portal?
I need an overview of practical steps to achieve the same.
Best Regards,
Kumar

Hi Deepu,
All the parameters in the SAP_BW system is correct and i have tested the ITS, WebAS and Connector tests also and everything is green. In the BI diagnostic tool everything was green however in the RSPOR_SETUP the Maintain User Assignment was getting failed, so i removed the UME Master System (Reference system) from the Portal as i'm using the SAP Logon Tickets both ways. So there is no need for the reference system. After that RSPOR_SETUP is okay and in the BI Diagnostic tool one is red (UME Master system).
One thing i have noticed in the RSPOR_SETUP now that it tells me in the second step:-
com.sap.ip.bi Java classes with different versions.
Different ABAP and Java Support packages
ABAP support package 12
Java Support package 11
Vaib
Any clue??
Vaib

BEx Analyzer (SAP BW 3.x) - No Applicable Data Found

Hi,
currently, i now access my BI Server remotelly and my local pc is install with Netweaver 2007s, and i try to do a tutorial on SAP BW. like create infosource, infocube and etc but when i finish creating the infocube and try to make a new query on BEx Analyzer (SAP BW 3.x), and seem like it cannot display anything the errors is as follow "No Applicable Data Found" so now i suspect is either drivers problem or access right problem.. beside that i do make an Installation Check On BEx Analyzer on Business Explorer after that i display this few red alerts.
Filename Version on PC
BW Components
sapbex.xla Not found
sapbex0.xla Not found
sapbexc.xla
OLE for OLAP
mdrmdlg.dll Not found
mdrmsap.dll Not found
mdxpars.dll Not found
saprfc.ini Not found
scerrlkp.dll Not found
SAP GUI core components
sapfctrl.dll Not found
sapfcust.exe Not found
sapfdraw.dll Not found
sapfewrm.dll Not found
sapfhook.dll Not found
wonder could anyone advise me on will this few components result i unable to display the data? if really i need those component how could i download it or should i reinstall it...
anyway for access right part, currently i not the super user account will it affect the query??

Hi Ram,
My dimension table i check already in the Data Warehousing WorkBench the data is sufficient.
even i also check on My Fact table, it has also data loaded in.
but then problem is i unable to display data out.
as according to the book, i follow it should be display out the whole information.
Regards
Jia Jun

Unable to Upload data from text file into BEx Analyzer selection screen

Hi,
No response from BEx Analyzer when I am trying to upload around 40,000 material from text file into BEx Analyzer selection screen using "Upload selections" options. But I am able to upload only 10,000 material from text file. I never faced same kind of issue when I am using BEx Analyzer 3.x. Please let me know I have to change any settings related to BEx or any other.
Thanks
Sri Krishna Ponnada.

Hello
It seems you are reaching the .NET memory limitation informed in note 1040454.
Because 3.5 does not use .NET it can work that.
Regards,
Ricardo

BEx Analyzer: Display values with Zero data

Hi,
I urgently need to know something about BEx QD/Analyzer:
If I drilldown e.g. Customer into the rows, it only shows me those customers for which there are values in place. However, I need to see all Customers, i.e. also the ones where the values are zero.
How can I do this in Bex Analyzer or if needed BEx QD.
Thanks
Sabine

Thanks,
but it won't be possible to create a multiprovider just for that.
Maybe I wasn't clear enough
If a have Customer A, Cust B and Cust C and I drilldown by customer in the rows, then the system only shows me Cust B and Cust C, because for a there has been e.g. no turnover in one specific month.
But in the drilldown in the report, I still want to see Cust A as well, even though the value is zero. So I should just see an empty line (instead of the key figures for Cust A).
Guys, that must be possible!! Help me
Sabine

Status of data in Bex query shows wrong date

Dear Experts,
The Bex qurey after sucessful execution, show the Status of data as old date i.e. feb 2012. but we observed that the data uplaod happens regularly and sucessful.
we tried executing the same query using RSRT/Bex Analyzer/Portal. the results are same i.e. showing incorrect status of data.
Note: The Bex query is built on BI Infoset which sources from DSOs and Master Data infoobjects, and BI version is 7.0.
Kindly please help for resolving the issue.
Best Regards,
Mannu.

Hi Vijay,
The data upload has happend today also and it is sucessful, the reporing status is available for requests from respective infoproviders.
'Status of data' is not a filed. if it an information to tell the status of data in query result.
Please find the following steps to find the 'status of data'
go to RSRT->give the query name and execute-> now after query results-> go to last page-> you can find the 'status of data'.
Best Regards,
Mannu

Satatus of Data in Bex Analyzer

Similar Messages

Maybe you are looking for