Satego X200-21D - Specifications of PCMCIA slot

Hi all,
can someone told me the specific for the PCMCIA Slot? In special I wanna know how much Volt the slot has.
3.3 V or 5 V or can the slot both of them?
Kind regards,,
Adrian

Hi twister666,
The Satego X200-21D doesnt have PCMICA slot, it has Express Card slot. This slot allows you to insert an Express Card. An Express Card module is a small, modular add-in card technology based on PCI Express and USB. The max. transmission rate at 2.5 Gbps. Both 34mm type and 54 type are supported.
But about voltage I can find no information but I think thats not important because there is a standard voltage for this specification that every card will work.

Similar Messages

  • Satego X200-21D - Which RAM for upgrade?

    Hello,
    I have a Satego X200-21D, Modell Nr. : PSPBEE-007001GR and I want to upgrade my memory from 2*1 GB to 2*2GB. Can I use DDR2 memory with support for DDR2 PC2-6400 or DDR2 PC2-5300 speed?
    Thanks
    wolfgang

    Hi
    I have checked the specifications of Satego X200-21D and it seems that you only need DDR PC2-5300 at least but you can also buy PC2-6400 modules because they are downgrade compatible. That means they would run with PC2-5300 speed but thats no problem.
    Make only sure that you buy high quality modules, e. g. Kingston. Alternative you can order RAM modules from an authorized service provider, the part number for 2GB is PA3513U-1M2G

  • Satego X200-21D: TS-L632D DVD-Drive doesn't read and burn DVD-R DL

    Hallo,
    I have problems with my SATEGO X200-21D DVD-Drive
    TS-L632D to read an burn DVD-R DL discs.
    I contacted the Toshiba-support via e-mail ans asked
    for a new drive-firmware, but the answer did not solve my problem.
    There are only updates in the toshiba download area,
    but not for my drive model. I can send my notebook
    for money to a service partner, to check this problem.
    I can not understand this! I bought a highend notebook
    for 1.700 EUR and it is no firmware update support
    available to solve problems with newer discs?
    If i search for this problem in the WEB, there an a lot of
    questions and problems with reading and burning
    DVD-R DL discs with this drive modell!
    How can it be???
    I hope for some hints to get a firmware drive update
    to fix the problems reading and writing DVD-R DL discs.
    Gettings J. Janni from Germany

    Hi,
    yes I have got the TS-L632D drive and not the TS-L632H - that is true. But why is no firmware update available for TS-L632D,
    because also this drive has problems with DVD-DL discs!? I payed 1700,- EUR for my Thoshiba notebook with the
    DVD-drive TS-L632D. And in my opinion it can't be, that for this drive version is no firmware update available!!!
    Other companys (f. i. DELL , SAMSUNG) support this drive version and offer firmware updates for this drive modell.
    It is a fact that my DVD-drive has problems to read and burn DVD-DL discs! This is a known fact for many drives and therfore
    exists firmware updates for the DVD-drives to fix this problem. But why not for my drive modell???
    My be it was an error to by a Toshiba Notebook!? I am a customer and I don't care what special
    DVD-drive modell is in my notebook (TS-L632D , H or wwhat ever)!!!
    My message to Thoshiba: "Pleas help me to solve my problem!!!"
    Greetings
    Janni from Germany

  • Satego X200-21D - possibilty for 8GB of ram ?

    Is there a possibility to run 8GB DDR2 ram (2x4GB) on this laptop ? Or new bios is needed ? Will be there in future one, that will grant this ?

    > "Supports 8GB of Memory the Mobile Intel 965 Express Chipset Family supports a main memory size up to 8GB."
    Mobile Intel 965 Express Chipset Family contains Intel PM965, Intel GM965 and Intel GL960 chipset
    The notebook was equipped with the Intel PM965 and you have to read the details about Intel PM965!!!!
    If you don't believe then buy 2x 4GB RAM modules and try to upgrade the notebook but please don't wonder if the notebook will not support it.

  • What wifi cards fit fully inside a (dual) PCMCIA slot?

    Teh background and information (bonus funny story)
    So I was poking my 9 year old laptop recently and amazingly found that via a USB wifi dongle I'd completely forgotten about for a few months, I could get wifi on said laptop, even over USB 1.1.
    Then I tried to figure out how to shove the dongle inside my laptop and things kinda went south from there at about 2.7 billion miles a second.
    Everything just went *flooooop* when I accidentally put the little PCB back inside the dongle the wrong way after taking it out to try and fit it inside a space inside the laptop; this wasn't problem, except I couldn't see the little blue LED. So I hastily took the board out to flip it over and I think I touched the it while doing so for the first and only fatal time...
    I also tried to craft a cardboard plug to fit in the USB port on the laptop, and may have pushed the little contacts into the plastic recesses in the port a bit too much; this is unlikely to be the problem because I very carefully re-bent the contacts out again, and my flash disk works every time I plug it in, sooo... probably not that.
    Anyway, now I know how to put my laptop back together again *doesn't say anything about the small collection of screws he has no idea what to do with*
    Right now, my USB dongle kinda works but really sporadically; it mostly doesn't work at all. It fails anywhere between the kernel thinking the "USB cable is bad" (</quote>) to fully detecting and configuring the dongle (under either an rtl8187 or ndiswrapper-powered driver), but not letting me connect to any SSIDs. I typically have to unplug the thing and shove it back in in the previous case, or give up in the latter, which I've no idea how to get around, until it feels like connecting again (perhaps after cooling down?).
    So I want to try a PCMCIA type card because...
    - I can't use my flash disk without a hub right now, since the dongle would occupy the only port available (although linux does say there's a 2 port hub inside >.>).
    - The port has a cute little flap over it that I don't want to remove, and it causes my USB dongle to not be able to go in properly unless I use a cable
    - I'm all like jittery about the USB port possibly not working =P
    I've found it impossible to find any sort of specification sheet for this box so I have no idea what kind of PCMCIA port it has, but I'd imagine type #1 if that's of any help. The laptop itself is a Toshiba Satellite 2540CDS also.
    Teh point
    I want to get away from the whole "vulnerable peripheral sticking out of side of laptop" thing and get a PCMCIA card that fits fully inside a laptop's PCMCIA slot, preferably without needing to use an external antenna.
    I don't mind if the card takes up the space of the upper slot as well; I'm not using that one (and doubt I will soon).
    I've been told that cards like this exist, but (of course) I only want one that is known to work with Linux, or at least one that should theoretically work (ie because it uses a supported chipset), and one that includes an internal antenna.
    Although an antenna sticking out the side sounds like it'd look cool, so I might be okay with that once I see what it'd look like
    So what do you recommend?
    -dav7
    Last edited by dav7 (2008-11-03 05:28:43)

    Hi Steve
    Well, I cant give you proper answer how you can exactly remove the PCMCIA slot.
    There are many screws and in my knowledge you have to remove all covers and screw which are placed at the bottom of the unit and inside under the keyboard.
    Please check this unit precise. Maybe you have overlooked some screws.
    But if it impossible to remove this PCMCIA slot from the unit I recommend to ask the service partner for a detailed instruction.
    Good luck
    Bye

  • Satego X200-21L - Black screen and 3 beeps on start up

    Hello
    I have a problem when I turn on my computer (Satego X200-21L). I got a blank screen and 3 beeps no BIOS boot up no nothing what shall I do?
    Anybody everybody please help!

    Hi
    Sounds like a hardware malfunction on your notebook because normally such beep codes mean that its something wrong with the hardware.
    Have you installed extra RAM? If yes remove it and try to boot with original RAM only. Furthermore try resetting the RAM in slot.
    Does it work?
    In worst case you have to go to an authorized service provider. The technicians can check the notebook and determine what is causing this problem.

  • PowerBook G3 (PDQ) - Startup disk and PCMCIA slot problem

    Hello
    I have encountered a problem with my powerbook G3 (PDQ model)
    Once when I had to configure my microphone, I saw that there was "Zoomed video" present in the list of audio inputs.
    I thought this was a glitch, and inserted my SD card reader into the lower PCMCIA slot. Then my display got messed up.
    The slot insertion doesn't seem to work right too, it resists much more than the top slot does.
    It didn't react to anything except Fn-Shift-Ctrl-Power, which is Reset.
    It happens in both OS9 and 10.2.
    Photo: http://instagr.am/p/NtWNH/
    Once I was able to insert it right so it wouldn't mess up, and i used the reader in the lower slot as usual.
    When I ejected it, the card didn't pop out as usual and it was hard to pull out, and the screen was messed up as well.
    The second problem is that when I start the "Startup Disk" control panel in OS9, the PowerBook hangs for no particular reason, also reacting to Reset only.
    Maybe there is a bootloader I can install so I'd choose the OS I want before actually booting anything?
    Could these problems be related to each other, or a dead battery? Maybe to the incorrectly set clock (however doesn't seem so)? Or related to using an Apple DVD drive?
    Thanks,
    ~ Vladislav Korotnev

    No it hasn't. What kind of battery does it use?
    The power battery is dead as well (not charging nor powering the pb)

  • Satego X200 - No Sound when HDMI connection is used

    Hi,
    I got my Satego X200 a year ago and since yesterday I am trying to use the HDMI interface to connect it to a LCD TV. I get a brilliant picture but no sound at all. Is there anything I am not taking into consideration? I've googled everything that I could think of but appropriat answers found.
    I would appreciate any help.
    Thanks in advance

    So I am back again with the solution that helped so I hope it will help other users. I did an update on BIOS, Graphic Card and HD Audio. The only thing that really helped was the driver / software update I did on Sound by updating drivers and s/w having downloaded them directly from the Realtek Site. SO I hope this hepls anybody else in the same situation.

  • What is open firmware command to boot a Powerbook G4 from a CF card in the PCMCIA slot?

    I have a Powerbook G4 Titanium with a bad motherboard that will no longer power the internal hard drive. I want to to install an OS and boot from a CF card in the PCMCIA slot. I understand this has to be done from Openfirmware, but I cannot figure out the command to do it.Does anyone know?

    Charles,
    Welcome to Apple Discussions.
    What I've found so far is a non-Apple solution drivers.
    I assume you've found the IO Xperts driver. (http://www.ioxperts.com/products/80211b_X.html)
    Is there an Apple developed solution out
    there for third party cards?
    Not exactly. Apple uses the Broadcom chipset. Some third-party manufacturers also use the Broadcom chipset and those cards would then work with the AirPort drivers. Here is a link to a list of wireless cards that note the chipset, OS and driver.
    http://home.earthlink.net/~metaphyzx/Wireless.htm
    (Note: the list is dated August 2005.)
    Manufacturers change their chipset so the version number of the card will make a difference. For example, the list shows that the Linksys WPC54G uses the Broadcom chipset. Well, that is true with version 1. Version 2 uses a Texas Instrument chipset and version 4 uses the Inprocomm chipset, which means these two do not work with the AirPort Driver.
    I use the Linksys WPC54GS v1.0 (SpeedBooster) that uses Broadcom. It was plug 'n play.
    It is hard to get an original Airport card today.
    A quick search found a number of sellers, but they cost 2-to-3 times more than a third party card. (I didn't check eBay.) A third-party card also avails you to the faster option of 802.11g.
    Hope this helps.

  • Pismo PCMCIA Slot

    I am trying to figure out if the problem I am having with my Pismo's PCMCIA slot is a slot failure or an incompatible PC Card. I am using a compact flash adapter that works in my powerbook g4 but in the pismo it just causes the finder in os9 to crash. in osx nothing happens at all and in both cases the apple system profiler shows nothing in the slot. also, when i boot from the os9 install cd it asks if i want to initialize it and then it fails. I have tried another pc card that reads memory sticks and it also doesn't work. Is the pismo finnky with pc cards? the airport card works, is that on the same bus? none of the pins are bent in the slot, it just seems like nothing is wrong.
    thanks for your help guys.
    Jeff

    Jeff,
    Before replacing any parts, I would try a little more troubleshooting.
    Try a FireWire or USB PC card in the Pismo.
    In 9.x and FireWire PC card, you already have the FireWire Enabler and FireWire Support extensions, but you will need to add the FireWire CardBus Enabler in the Extensions folder. You can get one here:
    http://www.versiontracker.com/dyn/moreinfo/macos/10842
    In 9.x and USB PC card, you already have two necessary extensions, USB Device Extension and USB Software Locator, but you need three additional USB extensions for the USB PC card:
    USB Mass Storage Extension
    USB Mass Storage Support
    USB Support
    You can easily get these three extensions here:
    http://eshop.macsales.com/tech/ftp/usb/usbextensions.sit
    Expand the .sit file and just drag the three extensions to the System Folder icon or drop them in the Extensions folder. These are the five extensions:
    USB Support v1.4.1
    USB Software Locator v1.5.6
    USB Device Extension v1.5.6
    USB Mass Storage Support v2.0.4
    USB Mass Storage Extension v2.0.4
    In 10.x and FireWire PC card, all necessary software is present.
    In 10.x and USB PC card, all necessary software is present. BUT, if you do not have a USB PC card with the correct USB chipset/controller, it will not work properly.
    There is another limitation with PC cards...they do not supply sufficient bus power to run anything but the lowest powered devices, e.g. mouse on USB PC card. I have read that a USB PC card will mount a USB flash memory card.
    My suggestion is this for the least amount of work: Beg/borrow a USB card and use in 9.x only after adding the necessary extension. See if the card shows up in the System Profiler; test a mouse; your iPod should also work; a USB HD should also work if it has its own power supply. You can also test a FireWire PC card in 10.x without adding any software. If you have a FireWire HD with its own power supply or a FireWire CD or DVD burner, it should work.

  • Which type of PCMCIA slots has Portege 7220?

    I've just got a Belkin USB 2.0 pcmcia card to fit in one of my pcmcia slots. This should give me 2 USB 2.0 sockets. I've put it in and my laptop is not seeing it at all. Thought it was a driver issue (I'm using XP) but now suspect that I don't have a Type II slot, It is an old laptop.
    Can any one here tell me?

    For USB 2.0 you for sure need CardBus slot. Portege 7220 is not old at all, it has CardBus (you would not be able to insert the card otherwise, BTW). However, if PC card slot is set to PCIC compatible (not CardBus/16 bit) the laptop would behave the way you say. Check you BIOS settings.
    Hope this helps.
    Regards,
    Vitaly

  • Does Macbook pro have PCMCIA slot for Panasonic P2 cards?

    Just wondered if any Panasonic HVX200 camcorder users can tell me how they get their P2 card footage into this new Macbook pro. Does it have a PCMCIA slot, if not, how do you do it?

    Nigel,
    There was a thread some days ago about the same topic.
    http://discussions.apple.com/thread.jspa?messageID=2133515&#2133515
    Best regards

  • Wireless Routers With PCMCIA Slot

    Does Linksys make any wireless routers beside the WRT543G-ST that have a slot for a PCMCIA Card?

    I think dibbler is right because I do not recall ever seeing one with the PCMCIA slot.  Although it would be cool if they did that to support some of the wireless broad band cards that are available now.  That would be a awesome security measure to keep your teenage kids from getting on-line after hours or when you are not home to monitor them.  Simply take the card out and take it with you.
    Message Edited by Ikester on 08-02-2007 11:02 AM
    Richard Aichner (Ikester)

  • PCMCIA Slots

    Please help! - I've got a ze4096ea laptop, and I need more usb ports. Answer: get a multi-port PCMCIA card.
    Problem: - Just WHAT PCMCIA slots have I got in the machine? - I can't make head or tail of the specs. manual.
    Have I got PCMCIA Class I, Class II, Cardbus or what? 

    They are Cardbus slots which just means they are capable of 32 bit data transfer. The form factor is Type II which means they are ordinary credit card thickness. Get a pcmcia/cardbus usb 2.0 card that has a power jack on it. You use one of the onboard usb ports for extra power with a usb to power jack cable. I am not even sure that your ze4000 has usb 2.0; in fact I am pretty sure it does not. I have had the best luck with the Belkin usb 2.0 card:
    Belkin
    This is only a 2 port card but you gain 2 high speed ports by giving up one low speed port, which is fairly useless anyway.

  • What power supports PCMCIA slot on Satellite M40-184?

    Hello all.
    Could anybody please inform me what is the power of the pc card slot?
    I have bought a card that needs 1amp and it doesn?t work.
    I don know if the power is enough or the card is defective.
    Thanks

    The card is the Avermedia's: AVerTV Hybrid+FM Cardbus.
    Link: http://www.avermedia.com/cgi-bin/products_digitvtuner_hybridcardbus.asp?show=2
    It states on the site: Important ! This requires PCMCIA slot that supplies 1A standard power output.
    I didn't manage to find any settings in the bios for the pc card slot. Any help?
    Thank you all for your answers.

Maybe you are looking for