Sateillite A200-1A9: Issue with sending/receiving E-mail using Windows Mail

Using Windows mail I have to close/open the programme to be able to send mails, they get stuck in the Outbox. By closing and reopening the programme the mail gets sent. Also the Blue figure 1 in brackets showning 1 unread mail in the Outbox is there all the time although there is no mails read or unread in the Outbox
Not a server problem as all mails are going/receiving fine on my desktop.
Pressing send and receive button does not help. although some of the time it will receive mails when pressing send/receive but will not send them
I do have Norton Internet security 2007 and am getting fed up with the continuing problems that this seems to cause over the period 2004-7.
Is there an issue with the Windows mail programme running with Vista that is known

I think I have found a solution
Please check this:
Windows Mail will not Send or Receive mails
http://support.toshiba-tro.de/kb0/TSB7701X30005R01.htm
It seems that the update of Software Desktop SMS to the newest version will help to sort out this problem.

Similar Messages

  • Is anyone else having issues with sending / receiving messages since ios7 upgrade

    Is anyone else having issues with sending / receiving messages since ios7 upgrade

    I found this link, and am trying it right now to see if it helps.
    http://forums.macrumors.com/showthread.php?t=1647944&highlight=ios7+imessage+tro uble

  • Problems with sending/receiving picture messages

    Does anyone know how to sort problems with sending/receiving picture messages on the iphone 4S?  I've gone through all the re-setting etc at the place I bought it and it still doesn't work!! Spoken to 02 and they said it's an issue with Apple software?? Any help appreciated.

    Can you send/receive SMS's? If so, and you can't send/receive MMS's, and MMS is turned on in Settings, 99.9% of the time the problem is on your carrier's end...most likely MMS is not provisioned properly on your account, regardless of what your carrier is telling you. Call back & have them remove MMS from your account & then re-provision your account for MMS.

  • I have been having issues with not receiving texts and voicemails daily, for a few months now. If I turn the phone completely off, when I turn it back on the messages will flood in from hours before. I can't be continually turning off my phone in case som

    I have been having issues with not receiving texts and voicemails daily, for a few months now. If I turn the phone completely off, when I turn it back on the messages will flood in from hours before. I can't be continually turning off my phone in case someone left me a message. How do I resolve this issue?

    Wifi:  my Cell phone will remember 10 wifi connections.  So delete any you don't use often and your home wifi and try to enter home wifi again.
    if it still won't connect to home wifi, call your internet provider for help.  You may need a newer router or different settings Or upgraded service.   Your phone seeks the best connection and will refuse lesser connections.
    last resort.  Backup the phone.  Do a full reset, then restore as new with the backup.
    if still not fixed, go back to apple and insist on repair or replacement.
    HOWEVER.   voicemail is not a wifi issue, it's a carrier function, which is why the SIM card is a suspect.

  • Issue with Sender File FCC

    Hi Experts,
    I have an issue with Sender File FCC Adapter. The file being picked is of type TXT and it is tab seperated. The first line contains the field names and from next line onwards we have values for those fields.
    The field names and field values are tab seperated. Even inserting a single letter in some field value manually disrupts the whole setup & alignment of the TXT file and the Sender File CC is unable to pick up the file from the shared folder. If the first file is errorenous and after that a correct TXT file is posted, it fails to pick up the correct file as it is trying to pick the errorenous file first.
    The Error thrown is :
    "Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR converting document line no. 2 according to structure 'ABCD':java.lang.Exception: ERROR in configuration / structure 'ABCD.': More elements in file csv structure than field names specified!"
    I have two questions:
    1. Is there a way to handle such a scenario? For e.g., the errornous TXT file gets picked but throws error in PI.
    2. Is there an alternative that the sender FCC channel picks up the correct files and filter out the errorneous ones ? ?
    Thanks,
    Arkesh

    Hi Arkesh,
    I think you are passing more number of fields than expected. Please check paramters defined and send the data accordingly.
    In the processing parameters tab of sender file adapter, you have an option called Archive faulty source files, below to that you would have option to enter the " Directory for Archiving files with Errors".
    I hope this helps you....
    Thanks,

  • Having issues with sending attachments via iMail to PC users

    Having issues with sending attachments via iMail to PC users. Either they do not see all the attachments or the attachment comes across blank. Is there any suggested ways to resolve this?

    You can also use Dropbox. 2GB free. Put files in the Public folder and you can send them links of the files instead.
    You can use my referral link http://db.tt/MXNpy62 to create an account.

  • Issues with Safari 3.0.1 for windows

    Issues with Safari 3.0.1 for windows (at work):
    Lenovo T60 with intel core duo T7200 @2.00Ghz plus additional monitor (Lenovo ThinkVision) in extended desktop mode running Windows XP Pro 2002, SP2
    1. Taskbar is configured to autohide: when Safari is the top (active) window, it remains on top. If the taskbar pops up, it does so behind the Safari window, because I cannot see it.
    2. If an open Safari window is dragged to the external (secondary) monitor, then maximized, it disappears to the side. It is not closed. I can still find it via Alt-tab or in the task bar and can, by right-clicking ‘Move’ from the taskbar use the arrow keys to move the window back into place. Clicking to reduce the window, then re-maximizing leads to the window disappearing to the side again.
    3. In general my impression is that this does not function at a ‘beta’ level, but more of an ‘alpha’ level. Still very buggy.
    Jcw
    iMacIntel Duo 2Gh   Mac OS X (10.4.7)   1G-RAM, 250vRAM
    iMacIntel Duo 2Gh   Mac OS X (10.4.7)   1G-RAM, 250vRAM

    This is a beta...thats why they give you the option to report probs via the bug icon. Since you are having these probs try and report them, I am not sure if apple has the time to scan these forums to try and find the big probs that people are having. So unless you report bugs, (and wait until the final realease) then they might never get noticed and or fixed.

  • My MacBook Pro 13" (2012) is running Windows 7 on Bootcamp and there is an issue with the headset I'm using.

    My MacBook Pro 13" (2012) is running Windows 7 on Bootcamp and there is an issue with the headset I'm using. I use a cheap Logitech Stereo Headset H130, but since there is only on audio plugin on the computer, I purchased a 3.5 mm 4-pin smartphone audio adapter thingy. That allowed me to put both my the sound coming to my headset & the microphone on my headset onto one wire. Everything worked wonderfully when running the Mac OS since they probably have support for that kind of stuff. The problem is though that once I try to use the same method in Windows 7, the OS doesn't recognize my headset microphone at all, but, instead when recording my voice decides to use the built-in mac microphone. Using this adapter still allows me to hear from my headset, but not use the microphone and that becomes a problem. It might be so that Windows 7 doesn't have support\drivers for that... How should I continue from here on out? Any advice?

    From what I have read from others on here you may be out of luck. You would need the appropriate Windows drivers for the Cirrus chip in the Mac and no one has been able to successfully locate them. Apple wouldn't support this since Windows is an optional install.
    Sorry to bring the bad news.

  • Issue with PR conversion to PO using ME59 withqty of similar line items

    Hi All,
    I'm having an issue with PR conversion to PO using ME59
    I have a PR with the following line items with all same details except quantity
    ex 1
    Mat  Qty  Unit Plant   St Loc
    M1   1    EA   P1      S1
    M1   29   EA   P1      S1
    The PR brings in the Unit automatically
    EA is Base Unit Of Measure -Material Master
    BT is Order Unit           -Material Master
    Conversion
    30 EA = 1BT
    When i convert this PR to PO using ME59N then i see 2 lines items
    M1   1   BT
    M2   1   BT
    Its doubling the qty (2 BT = 60 EA)
    ex 2
    Mat  Qty  Unit Plant   St Loc
    M1   1    EA   P1      S1
    M1   2    EA   P1      S1
    M1   27   EA   P1      S1
    The PR brings in the Unit automatically
    EA is Base Unit Of Measure -Material Master
    BT is Order Unit           -Material Master
    Conversion
    30 EA = 1BT
    When i convert this PR to PO using ME59N then i see 2 lines items
    M1   1   BT
    M1   1   BT
    M1   1   BT
    Its 3 times no
    PR Qty = 30 EA
    PO qty = 3  BT = 90 EA
    I guess during conversion to PO
    It sees PR Line item 1 and looks for another line items with similar fields ( in our case it sees line 2 in ex 1 and 2 and 3 in ex 2)
    i adds the qty 1 and 29 in ex1 and converts the total 30 each to 1 BT and when it moves to 2 line it see item1 and again creates 1BT but the line item 2 was already considered and it should be ignored
    Similarly if you see ex2 then it creates 3 limes with 1 BT each
    Let me know how to resolve this issue
    Thanks

    As for std SAP ME59N - make sure there is not rounding value is activated in the Material master as well as info record
    If this is not the case than check any custom code is activated for ME59N
    becuase generally in many compnay when they use ME59n they don't want the same material from diff PR to create the diff line item in the PO so using the custom logic in the user exist they trick the code
    it might be the case for you where you have issue.

  • I can no longer receive mail using the mail app? I have to go online instead - why?

    Hej some one,
    I can no longer receive mail using the mail app? I have to go online instead - why & what can I do?

    Check your smtp preferences in mail.app.
    See if mail.app's Connection Doctor has any useful info.  Does it's status indicate all is ok?  When you use it's Show Detail are there any (useful) error messages?

  • How to send HTML Format Mail using Java Mail in oracle 9i Forms

    Dear All
    could you please tell me how to send HTML Format Mail using Java Mail in oracle 9i Forms and how to implement the java mail ?
    if it is possible, could you please send me the sample code? please very urgent
    Thanks
    P.Sivaraman

    Hello,
    <p>Here is a Form sample.</p>
    Francois

  • Issue with SOAP receiver

    Hi,
    I'm using PI 7.0, SP13 and I'm sending a message to a MS webservice, using BURP as a proxy in between to avoid NTLM authorisation issues.
    The problem is that it's perfecly possible to send a message using soapUI, but sending the exact same message ends up in an error:
    "SOAP: error occured: com.sap.aii.af.ra.ms.api.RecoverableException: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request"
    I already configured the MessageTransformBean by setting the ContentType to text/xml; charset=utf-8. Here are the settings of my communication channel:
    Target URL: http://<correct URL on local network>
    User authentication: false
    Certificate authentication: false
    Proxy: BURP proxy and BURP port
    Proxy user authentication: false
    Secutiry profile: false
    Do not use SOAP envelope: false
    Keep headers: false
    Keep attachments: false
    Use encoded headers: false
    Use query string: false
    SOAP action: <correct SOAP action>
    I also played with the parameters "Do not use SOAP envelope", "Keep headers" and "Keep attachments", without any success. The only difference that I can think of is that soapUI runs on Windows, and the PI system runs on Linux.
    Ideas, anyone?

    @Baskar Gopal: I didn't generate a WSDL: I'm using the SOAP receiver to post a message to an existing webservice.
    @sdnuser: the endpoint URL is 100% correct. I also added the MessageTransformBean like I stated before.
    @Chirumamilla Sukarna: HTTP adapter doesn't work because I need the SOAP envelope.
    The payload is in both cases (soapUI and PI) the same. Here's the part that's different:
    soapUI (working part):
    POST /DynamicsNAV/WS/Rendon%20Voorburg/Codeunit/Webservice HTTP/1.0
    Accept-Encoding: gzip,deflate
    Content-Type: text/xml;charset=UTF-8
    SOAPAction: "urn:microsoft-dynamics-schemas/codeunit/Webservice:ContractorOrderInSync"
    User-Agent: Jakarta Commons-HttpClient/3.1
    Host: 192.168.1.8:7049
    Proxy-Connection: Keep-Alive
    Content-Length: 4292
    Connection: Keep-Alive
    SAP PI (not working part):
    POST /DynamicsNAV/WS/Rendon%20Voorburg/Codeunit/Webservice HTTP/1.0
    Accept: /
    Host: 192.168.1.8:7049
    User-Agent: SAP-Messaging-com.sap.aii.messaging/1.0505
    Authorization: Basic aGFhZ3dvbmVuQGJpbTpRYnFyRU84IQ==
    content-id: <soap-C89FD74E68782E13E1000000C0A8E010 @ sap.com>
    Content-Type: text/xml;charset=UTF-8
    Content-Length: 4292
    SOAPACTION: "urn:microsoft-dynamics-schemas/codeunit/Webservice:ContractorOrderInSync"
    Connection: Keep-Alive
    I know the content type looks correct here, but the SOAP adapter gives an error about this nevertheless.

  • Issue with sending message delay

    Hi; Got an issue that has cropped up with Mail lately. Been on the phone all day with Apple Care. Every test on the planet hasn't found what's wrong. I would greatly appreciate knowing if anyone else has come across this issue.
    Mail version 4.3 (1081) on a clean IMac OSX 10.6.4. All updates current as of today. ISP is RCN; all settings correct and no known issues with the RCN SMTP server according to them.
    Issue is repeatable through all troubleshooting tests performed today. You name it; we did it :-))
    Issue seems isolated to sending messages in Mail. Message can be composed normally, then when the send button is hit, I get a revolving wheel for between 30 and 45 seconds on the send folder, then the message clears normally and in the case of a test back to me, can be received normally.
    What's strange is that I installed Thunderbird for the sole purpose of testing the send function there to isolate MAIL as the culprit and all messages instantly cleared in Thunderbird and received normally. This takes the RCN SMTP server out of the error equation as far as I can determine.
    Anyone have any ideas on this issue. Apple has given up trying to find the problem.
    Many thanks
    Dudley Henriques

    It is "Mail and Address Book" but it's a subset of 10.5
    here...http://discussions.apple.com/forum.jspa?forumID=1338
    edit: SL stands for snow leopard i.e. 10.6.x
    Message was edited by: taylor.henderson

  • Issue with custom receive Pipeline component

    I have been facing issue with creating a custom receive pipeline component. The Pipeline is to receive large file, if the file size is large it has to read the incoming stream to a folder and pass only some meta data through the MessageBox. The Execute method
    I am using is,
    #region IComponent Members
    public IBaseMessage Execute(IPipelineContext pContext, IBaseMessage pInMsg)
    if (_largeFileLocation == null || _largeFileLocation.Length == 0)
    _largeFileLocation = Path.GetTempPath();
    if (_thresholdSize == null || _thresholdSize == 0)
    _thresholdSize = 4096;
    if (pInMsg.BodyPart.GetOriginalDataStream().Length > _thresholdSize)
    Stream originalStream = pInMsg.BodyPart.GetOriginalDataStream();
    string largeFilePath = _largeFileLocation + "\\" + pInMsg.MessageID.ToString() + ".zip";
    FileStream fs = new FileStream(largeFilePath, FileMode.Create);
    // Write message to disk
    byte[] buffer = new byte[1];
    int bytesRead = originalStream.Read(buffer, 0, buffer.Length);
    while (bytesRead != 0)
    fs.Flush();
    fs.Write(buffer, 0, buffer.Length);
    bytesRead = originalStream.Read(buffer, 0, buffer.Length);
    fs.Flush();
    fs.Close();
    // Create a small xml file
    string xmlInfo = "<ns0:MsgInfo xmlns:ns0='http://SampleTestPL.SchemaLocation'><LargeFilePath>" + largeFilePath + "</LargeFilePath></ns0:MsgInfo>";
    byte[] byteArray = System.Text.Encoding.UTF8.GetBytes(xmlInfo);
    MemoryStream ms = new MemoryStream(byteArray);
    pInMsg.BodyPart.Data = ms;
    return pInMsg;
    #endregion
    Here I want the xml to be dropped in to the File share Eg: E:\Dropbox\PL\send and and the entire message to be dropped in the folder Eg: E:\Dropbox\sendLarge. so in the ReceivePipeline properties i set like
    And in the send port the destination i give is E:\Dropbox\PL\send.
    The issue is both the xml and the message are getting dropped in to the same folder E:\Dropbox\PL\send and the message is not getting dropped in E:\Dropbox\SendLarge. Any help is greatly appreciated.

    using System;
    using System.Collections.Generic;
    using System.Text;
    using Microsoft.BizTalk.Message.Interop;
    using Microsoft.BizTalk.Component.Interop;
    using System.IO;
    namespace Sample.ReceivePipelineLargeFile
    [ComponentCategory(CategoryTypes.CATID_PipelineComponent)]
    [ComponentCategory(CategoryTypes.CATID_Decoder)]
    [System.Runtime.InteropServices.Guid("53fd04d5-8337-42c2-99eb-32ac96d1105a")]
    public class ReceivePipelineLargeFile : IBaseComponent,
    IComponentUI,
    IComponent,
    IPersistPropertyBag
    #region IBaseComponent Members
    public string Description
    get
    return "Pipeline component used to receive large file and save it ina disk";
    public string Name
    get
    return "ReceivePipelineLargeFile";
    public string Version
    get
    { return "1.0.0.0";
    #endregion
    #region IComponentUI Members
    public IntPtr Icon
    get
    return new System.IntPtr();
    public System.Collections.IEnumerator Validate(object projectSystem)
    return null;
    #endregion
    #region IPersistPropertyBag Members
    private string _largeFileLocation;
    private int _thresholdSize;
    public string LargeFileLocation
    get { return _largeFileLocation; }
    set { _largeFileLocation = value; }
    public int ThresholdSize
    get { return _thresholdSize; }
    set { _thresholdSize = value; }
    public void GetClassID(out Guid classID)
    classID = new Guid("B261C9C2-4143-42A7-95E2-0B5C0D1F9228");
    public void InitNew()
    public void Load(IPropertyBag propertyBag, int errorLog)
    object val1 = null;
    object val2 = null;
    try
    propertyBag.Read("LargeFileLocation", out val1, 0);
    propertyBag.Read("ThresholdSize", out val2, 0);
    catch (ArgumentException)
    catch (Exception ex)
    throw new ApplicationException("Error reading PropertyBag: " + ex.Message);
    if (val1 != null)
    _largeFileLocation = (string)val1;
    if (val2 != null)
    _thresholdSize = (int)val2;
    public void Save(IPropertyBag propertyBag, bool clearDirty, bool saveAllProperties)
    object val1 = (object)_largeFileLocation;
    propertyBag.Write("LargeFileLocation", ref val1);
    object val2 = (object)_thresholdSize;
    propertyBag.Write("ThresholdSize", ref val2);
    #endregion
    #region IComponent Members
    public IBaseMessage Execute(IPipelineContext pContext, IBaseMessage pInMsg)
    if (_largeFileLocation == null || _largeFileLocation.Length == 0)
    _largeFileLocation = Path.GetTempPath();
    if (_thresholdSize == null || _thresholdSize == 0)
    _thresholdSize = 4096;
    if (pInMsg.BodyPart.GetOriginalDataStream().Length > _thresholdSize)
    Stream originalStream = pInMsg.BodyPart.GetOriginalDataStream();
    string largeFilePath = _largeFileLocation + "\\" + pInMsg.MessageID.ToString() + ".zip";
    FileStream fs = new FileStream(largeFilePath, FileMode.Create);
    // Write message to disk
    byte[] buffer = new byte[1];
    int bytesRead = originalStream.Read(buffer, 0, buffer.Length);
    while (bytesRead != 0)
    fs.Flush();
    fs.Write(buffer, 0, buffer.Length);
    bytesRead = originalStream.Read(buffer, 0, buffer.Length);
    fs.Flush();
    fs.Close();
    // Create a small xml file
    string xmlInfo = "<ns0:MsgInfo xmlns:ns0='http://SampleTestPL.SchemaLocation'><LargeFilePath>" + largeFilePath + "</LargeFilePath></ns0:MsgInfo>";
    byte[] byteArray = System.Text.Encoding.UTF8.GetBytes(xmlInfo);
    MemoryStream ms = new MemoryStream(byteArray);
    pInMsg.BodyPart.Data = ms;
    return pInMsg;
    #endregion
    Thanks Osman Hawari, for trying to help me out.

  • Issue with Sender Side JDBC processing

    Hello,
    I am facing some problem with Sender Side JDBC Processing.
    I am polling the DB MY SQL Server 2000 and using some SELECT statement i picked up some data and updated the DB with an UPDATE statement. At the receiver side i am using RFC adapter which takes the data from the DB and process further to SAP system.
    At sender side , i can see that the DB has been updated but in Integration Engine / Adapter Engine i could see any message related to that. So now my question is where did the message go.
    Can you please provide the inputs.
    THanks,
    Soorya

    Hi Surya,
    as u mentioned that u r unable to see ur message in IE & Adapter enigne
    pls do chk with the DB connections with XI and make sure that u choose every thing under same name space
    pls try to refersh cache
    thanx
    Sampath

Maybe you are looking for