Satelite A100-02B - Can I get new graphic card?
Hello folks,
some weeks ago my, unfortunately 2 year and 2 month's old, Toshiba Satelite A100-02B gave up completely.
The grafic card (i hope its called like that in english) and display crashed...
My question is now: is there any possibility to get a new card?
I can't find any fitting Geforce 7600 GO grafic cards....
Thats why i am asking here:
where can i buy such a grafic card - or: are there other (better) grafic cards available that fit in this notebook?
I hope you folks can help me with my desaster :(
your welcome
Cornell from Germany :)
thats complete nonsense written there!
GPU: In all cases the GPU is soldered on the system board and cannot be exchanged.
thats wrong - look here
Link: [a toshiba graphic card at ebay|http://cgi.ebay.de/ATI-X1400-Toshiba-Satellite-A100-Grafikkarte_W0QQitemZ400025269461QQcmdZViewItemQQp tZDE_Elektronik_Computer_Computer_Graphikkarten?ha sh=item5d235d34d5&_trksid=p3286.c0.m14&_trkparms=6 5%3A12%7C66%3A2%7C39%3A1%7C72%3A1229%7C293%3A1%7C2 94%3A50]
its the wrong GPU - but also a graphic card for a satelite notebook - thats why im looking for the correct one (it has the same shape like the one linked above)
Similar Messages
-
Can't get dedicated graphics card to work.
I can not get the dedicated graphics card to work on my laptop. I spend my night installing and uninstalling drivers, wich none of them seem to work.
To check the card if its working, I dissabled Intel HD Graphics adapter and left the AMD, instead of getting the dedicated card to work I got "Microsoft Basic Display Driver".
Please help me....
EDIT: I only reinstalled AMD drivers, I didn't touched the intel ones since they work.
My laptop: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04089426&tmp_task=prodinfoCategory&cc=us&dlc=en...HI FXV,
Thank you for your query, I will do my best to assist you.
I understand you have already uninstalled and then downloaded and reinstalled the recommended driver to no avail.
Here is a link to a post by @Paul_Tikkanen that may also help. beta driver. This seems to have solved the issued for someone else.
Have you tried running the HP Support Assistant to aid with updates and resolving issues.
Have you tried Using Automated Troubleshooting (Windows 8) to assist with this difficulty.
You could also try Refresh Your PC to Resolve Problems (Windows 8) to resolve issues.
That last thing I can suggest before referring to HP support is a recovery back to factory. Performing an HP System Recovery (Windows 8)
During the recovery process you will get a prompt to backup your personal files to prevent data loss, if you have not done one recently, I suggest you do one now.
Restoring Files that were Backed Up Using HP Recovery Manager (Windows 8).
If none of the above has resolved the issue then I suggest contacting HP support for assistance. They have the ability to remotely access your system to help locate and resolve issues.
Please call HP technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region HP Technical Support Sitemap.
Please let me know the outcome.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! -
Can I Change My Graphics Card?
Hello, I've dealt with my laptop with low graphics card settings for a while, but games are updating and I have limited options now. Is there any way I can purchase a new graphics card and install it? Or even upgrade the current one I have?
Any information would be helpful, I have listed my specs below (I just Saved All Information from dxdiag, sorry if there's extra info):
SYSTEM INFORMATION:
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.130828-1532)
Language: English (Regional Setting: English)
System Manufacturer: LENOVO
System Model: 1066AWU
BIOS: Default System BIOS
Processor: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz (4 CPUs), ~2.5GHz
Memory: 6144MB RAM
Available OS Memory: 6058MB RAM
Page File: 3884MB used, 8230MB available
Windows Dir: C:\windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7601.17514 32bit Unicode
DISPLAY DEVICES:
Card name: Intel(R) HD Graphics 3000
Manufacturer: Intel Corporation
Chip type: Intel(R) HD Graphics Family
DAC type: Internal
Display Memory: 1696 MB
Dedicated Memory: 64 MB
Shared Memory: 1632 MB
Current Mode: 1366 x 768 (32 bit) (60Hz)
Monitor Name: Generic PnP Monitor
Thank you!hi Gabedean,
Welcome to Lenovo Community Forums!
You can check this similar thread about your inquiry.
http://forums.lenovo.com/t5/IdeaPad-Y-U-V-Z-and-P-series/Possibility-of-manually-installing-graphics...
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
i got a new lenovo desktop windows 8.1,installed itunes and synced my iphone 4 no problems. then i imported a cd of songs which showed up in recently added but not in main library ,therefore it did not sync to the iphone. how can i get new songs to appear in the main library and sync properly
thanks
johnCheck the songs are really not in the Music section of the library by clicking the magnifying glass in the search box and unticking Search Entire Library if it is ticked, then typing in the name of the album. If the tracks still don't show try closing iTunes and deleting a hidden file called sentinel from inside your iTunes folder. This should make iTunes run an integrity check on the database when you start it again. Make sure the tracks are checked before you try syncing again.
tt2 -
I can't get new version of itunes to install on Windows 7 64 bit computer. Receive message that reads insufficient privileges to access c:\program files\ipod\bin. I've followed several threads I've read here but nothing is working.
For such situation, I'd suggest the following:
1. Remove current installed office with the fix-it tool in
KB2739501, and follow the "Remove Office manually" section to make sure there are no remaining files
2. Either download a trial version of Office 2013 from
http://office.microsoft.com/, or from
http://technet.microsoft.com/en-us/evalcenter/jj937170
3. Reboot your computer in clean boot mode, and run setup again
Max Meng
TechNet Community Support -
The LCD for my macbook air model number MC965LL/A (purchased 2011) is broken , where can I get new one and what is the part number for it ?
You can find them at vendors like ifixit and instructions to install.
http://www.ifixit.com/Mac-Parts/MacBook-Air-13%22-Mid-2011 -
Can't get new photos added to existing iPhoto albums to sync with iPhone
I tried talking about this in the iTunes area, but there was no response:
https://discussions.apple.com/message/20660036#20660036
I thought I'd drop by the iPhone discussion area next.
The problem in a nutshell is that I can't get new photos added to iPhoto albums to sync with my iPhone 5. I can even unselect the albums, sync, see the albums deleted on the iPhone, select the albums again, sync, see the albums recreated - but the recreated albums don't include the photos I added yesterday.
I don't know if this is an iTunes 11 bug, an iPhoto bug or an iPhone bug.
Any suggestions?
Thanks,
dougYes, but which album will be empty?
Anyway, as soon as I saw how creating albums locally on the iPhone actually worked I said to myself, "This is not reasonable" and as much as I dislike iPhoto decided to keep doing it there until that feature is improved.
It seems like an obvious thing to improve. Then the albums can sync between the iPhone, iPhoto and other iOS devices more like "it just works" (which it doesn't do now).
doug -
ImageUltra Builder 5 - Can't get new computers to connect to repository
Greetings. I've recently (finally) upgraded from IUB 3 to IUB 5 and while our older PC's connect to the upgraded repository and image just fine, I can't get newer PC's to even grab an IP in the WinPE environment after booting off a disc (for network distribution).
I know this is because I need to figure out how to get the latest NIC drivers (for like a T520) into the repository for IUB 5, but I've followed the instructions in the manual for it and no matter what I try I cannot get them loaded properly.
I found another post in these forums that appeared to address this, but after following the (somewhat muddy) instructions there I still cannot get it working.
So far I'm placing all my drivers for the T520 etc. into \repositoryshare\drvs_7pe\drivers\preboot\drivers AND \repositoryshare\drvs_7pe\wim\drivers\windows\system32.
Note that these drivers worked just great on my IUB 3 boot discs. So I guess I don't have the \repositoryshare\... folder structure setup correctly (?)
Thanks for the help in advance!kimnarakasa wrote:
same problem when i install this wireless router. Im doing it for 2 days. Sometimes its successful but when I am browsing I see my browser disconnected intermitently. Cisco must do something about this. Because its really annoying
Make sure firmware is updated to the latest version. You can download it here http://homesupport.cisco.com/en-us/support/routers/WRT120N. Just reset and reconfigure the router. That should fix it.
* Setting up a Linksys router for DSL Internet connection
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=20ee1457387f40178cd5f41d4b585db4_3687.xml&pid=80&r...
* Setting up a Linksys router with Cable Internet service
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=0ff4c94586a345d082828ec2161aaecf_3686.xml&pid=80&r... -
Can't get NEW black ink cartridge to work in 5515 HP all-in-one-printer
Can't get NEW black ink cartridge to work in printer..help
Hi caralu,
I was just wondering if you were able to try banhien's recommendation? Please let me know the outcome.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping! -
Can I put a new graphics card and power supply in my computer.
Hey all, I have the P7-1459 comp and it is good, but i was hoping to maybe give it a gaming boost. But i havent been able to find out if it could handle what i want to do. The new Graphics card would require a 450W power supply and i dont know if this comp could handle it. Anyone know one way or another? Need some help.
This question was solved.
View Solution.Joshua, you are very welcome!
I am sorry that I misunderstood your question. I thought that you wanted to know if the computer would handle the card.
Yes, you can upgrade the power supply unit (PSU). I suggest measuring the existing PSU and comparing those measurements to the one that you choose. I like OCZ and Corsair. They will provide enthusiast quality with a reasonable price. A good video card requires clean, stable power. I recommend at least 500W; 550W to 600W would be even better. This would allow for some future upgrades. The computer only uses the amount of power needed to run the components.
I hope this helps.
Please click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee. -
I have windows xp and I can't get new version of itunes to install, help???
I have Windows XP and I can't get new version of itunes to install on my computer, please help??????
I keep getting the same error message about a program in the installer not finishing as expected.
Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
I can't get new versions of itunes to install on my windows computer. Any Suggestions? Every time I try, it downloads OK but when it proceeds to the install, I keep getting the same error message about a program in the installer not finishing as expected. It quits the install and that's that. Very frustrating.
I keep getting the same error message about a program in the installer not finishing as expected.
Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
I can't get 'new message' in imail....any ideas?
I can't get 'new message' in imail....any ideas?
Step 1: Turn on the computer
Step 2: Do you have an Internet connection? To test this, go to your applications and in the utilities folder double click on Network Utility. Go to the ping section and type in www.Google.com. If you can get there then you have Internet. Make sure your DNS servers are correct for the network you are on. If you are using a static IP try using DHCP and get an IP address and check then.
Step 3:Are you at home or school? If you are at school, they might have the mail app blocked. I know that at my college, I am unable to get my mail on the Apple Mail app.
Step 4: Are your connections configured correctly on the mail app. If you are using gmail, the settings will be automatically configured. If you have your own e-mail address you are adding for your work then you will have to consult your IT department and get the correct settings.
Step 4: Do you have an antivirus software that is blocking any Internet connection for the app. Yes I said antivirus and mac in the same sentence. MAC GETS VIRUSES TOO! Go into the firewall configuration and unblock the mail app. -
I have 2007 mac pro i need a new graphic card what kind can i use?
have 2007 mac pro i need a new graphic card what kind can i use?
http://forums.macrumors.com/showthread.php?t=1345150
http://blog.macsales.com/6856-owc-reveals-which-radeon-video-cards-work-with-200 6-2009-mac-pros -
It is an HP TouchSmart 310-1110me with Windows 8. I want to increase my dedicated memory. Can I do it without a new Graphics Card or I need to use a new one? In the latter case, can I use a new one?
Hi,
The video processor for the TouchSmart 310-1110me is soldered to the motherboard so is not possible to replace it. Review these specifications under Integrated Video.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT
Maybe you are looking for
-
How to tell whether video preview is working?
An app shows video preview with code essentially the same as in the MSDN document: async void ShowPreview(object sender, RoutedEventArgs e) if (mediaCaptureMgr == null) // Using Windows.Media.Capture.MediaCapture APIs // to stream from webcam mediaCa
-
How to change data type and col. width of text item
hi, how will we change the datatype and width of a text item in runtime. set_item_property(itemname,fixed_length,20);--- it is for width. please help me. Regards
-
When I try to pick a game to play, from the games that I down loaded on my ipod , it doesnt work when I touch the picture it doesnt go on < I dont know why
-
Flash installs successfully but still doesn't work
I'm getting very agitated at my cpu. I go to a site that requires flash. I'm directed to adobe to install it. Installation is successful...always. I have tried closing my browser and reopening and it still says I need to install flash to view that si
-
I want to change the date format MM/YYYY to MM.YYYY in web report
Hi to all experts, Here the problem is: when i run a report for variable input when we select date as MM/YYYY its getting error . Here i need to change MM/YYYY to MM.YYYY. can u please tell me where exactly i need to change means in BEx or Web? i