Satelite A30 does not see any other network devices in WLan

I recently bought a Toshiba Wireless LAN Mini PCI Card, i've installed it and managed to get it to recognise my broadband but it does not see any other network devices. I was not supplied with any drivers or software to operate the card (I bought it from a proper dealer). Can you recommend downloads that would run this card?
I have a Satelite A30 laptop 1gb ram 60GB HDD.
Also large files sometimes stop transfering (hangs)when using my USB connection. The usb controller is using microsoft driver 5.1.2600.0 dated 1 june 2002.
Is this a driver problem?

Hi
If the WLan card is properly installed so you have only not configured you settings.
I dont know which devices in the broadband you mean but usually if you want to communicate or transfer files between notebooks through the WLan so all computers must be in the same domain or workgroup.
I cannot give you a proper answer but only a suggestion. I have red that sometimes a lower power could be responsible for such issue. Try to disable the option Power safe in the USB root hub properties in the device manager.
Hi
If the WLan card is properly installed so you have only not configured you settings.
I dont know which devices in the broadband you mean but usually if you want to communicate or transfer files between notebooks through the WLan so all computer must be in the same domain or workgroup.
I cannot give you a proper answer but only a suggestion. I have red that sometimes a lower power could be responsible for such issue. Try to disable the option Power safe in the USB root hub properties in the device manager.

Similar Messages

TS1398 my ipone 4s does not see any wifi networks my ipad works ok tried all of the above resetting network etc still does not see wifi ?

my ipone 4s does not see any wifi networks my ipad works ok tried all of the above resetting network etc still does not see wifi ?

If no change after restoring the iPhone with iTunes as a new iPhone or not from the backup, the iPhone has a hardware problem with the wireless card or with something else.

TS1538 itunes does not see any of my devices.

itunes does not see any of my devices. It used to. But not any more. Why. They show up in Windows. But not itunes.
<Edited by Host>

Try
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem

My Apple TV does not see any wifi networks after 7 update.

i Have recently updated my Apple TV to 7 and ever since then I cannot see any wiif networks. I can connect through wired connection and works fine. I have tried Apple troubleshoo page and nothing works. Any ideas?

Hi, Cgomez8889.
Thank you for visiting Apple support Communities.
Here are some troubleshooting steps that I would recommend when experiencing this issue.
Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS4546
Cheers,
Jason H.

Airport on computer does not see any wifi networks

Airport worked fine until recently and worked fine when I installed new OS a while back. I can see no wifi networks including my Airport Express. My other Mini sees it and others as well as my MacBook so it seems to be an issue with that computer.
Sometimes I can log into my network by choosing Join Other Network but sometimes it doesn't work like now. Earlier today I logged in in this method and then it dropped out and I haven't been able to connect again. Any suggestions as to what the problem is?

Yes, I had thought of that too. Just wanted to avoid buying another card without being sure of the problem.
I've now tried setting up two routers to the 5GHz band, and sure enough, they both work and their wifis are picked by the macmini. All the other wifi networks I see around my house seem to be 54g.
So it seems that only the b/g part of the macmini's wifi card is broken, while the n part is working properly. Do you know if this is possible or if there is a configuration in the macmini that is forcing it to only use the 802.11N?
Thanks for your help anyway!

IBook G4 Airport Extreme does not see any SSID

Hi,
My iBook 1,2 Ghz has been working great for several years now.
I am working with Mac OS X Tiger (10.4.11) for quite some time
and it never let me down. I connect to the internet using an Airport Express
connected to a speedtouch router.
The Airport Express Card in my iBook always found 6 or 7 SSID's of other
Wireless Networks in my neighbourhood and it used to login automatically on
my Airport Express wireless wetwork station.
Last week it suddenly stopped working correctly.
After starting OS X on my laptop the little Airport icon in the upper bar faded out grey.
When I click it it says it can't find any networks.
I checked all my settings, downgraded my Airport Extensions
and even installed a spare (refurbished) Airport Extreme Card.
Even with another Airport Extreme Card it does not see any wireless networks.
My other macs, a unibody MacBook Pro and white MacBook work fine with the Airport Express.
What could be wrong? Am I overlooking something here? Can somebody help me out?
How can i get my Airport Express/iBook G4 connected to my wireless network again?

Hi Elko,
Thanks for the reply.
I re-installed the original Airport Extreme card into the slot again.
But now i pushed it harder than the first time. (just like you said)
I noticed the second click, but that doesn't seem to be the problem.
Both Airport Cards (the original and the new) were installed correctly.
I also checked the antenna connection but that is seated o.k. too.
After re-installing the card, i booted into Mac OS X Tiger and checked the ASP.
It says a Airport Extreme Card is installed with firmware version 405.1 (3.90.34.0.p.18)
and the langauge version is international/worldwide. So far, so good.
Nevertheless the airport card does still not find any wireless networks or SSID's after
scanning multiple times. (Location on automatic)
I am planning an upgrade to Leopard today. Maybe that's gonna help, since there were some Airport Extreme updates in Leopard. If that's not the solution, I will stay with your other suggestion and buy me a nice USB dongle.
Do you have any idea what type of dongles work best with Leopard? I have seen some different models, but a lot of dongles require third-party software to make it work and are not automatically recognized by OS X.

"An autonomous transaction does not see any changes made by main transact"

Hi,
I'm trying to reproduce the "An autonomous transaction does not see any changes made by main transaction" reffered on :
Oracle® Database Application Developer's Guide - Fundamentals
10g Release 2 (10.2)
Part Number B14251-01
chapter 2 SQL Processing for Application Developers
Paragraph : Autonomous TransactionsI set up a simple case...
create table emp_ as select * from emp
begin
update emp_ set hiredate=hiredate+100 where empno=7934;
end;
create or replace trigger trg_emp_
after insert or update on emp_
for each row
declare
    pragma autonomous_transaction;
    emp_var emp.hiredate%type;
begin
    select hiredate
      into emp_var
      from emp_
    where empno=:new.empno;
    dbms_output.put_line('empno: '||:new.empno);
    dbms_output.put_line('old hiredate: '||:old.hiredate);
    dbms_output.put_line('new hiredate: '||:new.hiredate);
end;Prior to any change...
SQL> select empno,hiredate from emp_;
EMPNO HIREDATE
5498 21/4/1982
5499 11/10/1981
5411 10/10/1981
5410 10/10/1982
7369 17/12/1980
7499 20/2/1981
7521 22/2/1981
7566 2/4/1981
7654 28/9/1981
7698 1/5/1981
7782 9/6/1981
7788 19/4/1987
7839 17/11/1981
7844 8/9/1981
7876 23/5/1987
7900 3/12/1981
7902 3/12/1981
7934 23/1/1982After the change...
SQL> begin
2    update emp_ set hiredate=hiredate+100 where empno=7934;
3 end;
4 /
empno: 7934
old hiredate: 23/01/82
new hiredate: 03/05/82
PL/SQL procedure successfully completedAccording to the Oracle doc the select of the autonomous transaction should not see the change made to the hiredate column of the table in the main transaction(in the anonymous block)....
What may i do wrong..????
Thank you,
Sim

Simon:
As Tubby pointed out, your dbms_output commands do not display the value you selected in the trigger. Your trigger based demonstration needs to be more like:
SQL> SELECT * FROM t;
        ID DT
         1 05-SEP-2009
         2 17-JUL-2009
SQL> CREATE TRIGGER t_ai
2     AFTER INSERT OR UPDATE ON t
3     FOR EACH ROW
4 DECLARE
5     PRAGMA AUTONOMOUS_TRANSACTION;
6     l_dt t.dt%TYPE;
7 BEGIN
8     SELECT dt INTO l_dt
9     FROM t
10     WHERE id = :new.id;
11     DBMS_OUTPUT.Put_Line ('ID: '||:new.id);
12     DBMS_OUTPUT.Put_Line ('Old dt: '||:old.dt);
13     DBMS_OUTPUT.Put_Line ('New dt: '||:new.dt);
14     DBMS_OUTPUT.Put_Line ('Aut dt: '||l_dt);
15 END;
16 /
Trigger created.
SQL> UPDATE t SET dt = sysdate WHERE id = 2;
ID: 2
Old dt: 17-JUL-2009
New dt: 25-OCT-2009
Aut dt: 17-JUL-2009
1 row updated.So, the automomous transaction select did not see the changed value of dt.
I know you are just trying to understand automomous transactions here and would never do sometihg like this in production right? :-)
Your trigger, as written, has some interesting side effects because of the automomous transaction. For example:
SQL> INSERT INTO t VALUES(3, sysdate - 25);
INSERT INTO t VALUES(3, sysdate - 25)
ERROR at line 1:
ORA-01403: no data found
ORA-06512: at "OPS$ORACLE.T_AI", line 5
ORA-04088: error during execution of trigger 'OPS$ORACLE.T_AI'
SQL> UPDATE t SET id = 3 where trunc(dt) = TO_DATE('05-Sep-2009', 'dd-mon-yyyy');
UPDATE t SET id = 3 where trunc(dt) = TO_DATE('05-Sep-2009', 'dd-mon-yyyy')
ERROR at line 1:
ORA-01403: no data found
ORA-06512: at "OPS$ORACLE.T_AI", line 5
ORA-04088: error during execution of trigger 'OPS$ORACLE.T_AI'John

Mac Pro early 2008 2 x 2.8GHz Quad Core 10.7.5, replaced 4 x 500ghds with 4 x 3Tb and Raid card Raid5 them OK but can not load time machine back up as it does not see any of the 4 drives, neither does disc utilities, any thoughts?

On my Mac Pro, early 2008 2 x 2.8GHz Quad Core 10.7.5, replaced 4 x 500ghds with 4 x 3Tb. The Raid card Raid 5ed them OK but can not load time machine back up as it does not see any of the 4 drives, neither does disc utilities, any thoughts?

You don't see drives when using a hardware RAID only the volumes.
WD Green are not suitable for hardware RAID (or software RAID for that matter).
USB2 and TimeMachine are a disaster waiting to happen. I've used SATA (internal) and eSATA (using SATA PCIe cards) trouble-free.
I can't say I begin to understand your use or "choosing the install drive for the backup"
Install what?
You don't load TimeMachine. Maybe seems minor but that is not how to describe the behavior of software.
You read FAQ and How To http://www.apple.com/support/timemachine
Time Machine’s Gory Details:
https://www.apple.com/support/timemachine/
TimeMachine 101
https://support.apple.com/kb/HT1427
Lion Recovry & TimeMachine
http://www.apple.com/support/lion/installrecovery/
http://www.apple.com/support/lion/
How To Restore Your System
http://pondini.org/TM/14.htmlMac OS X v10.7 Lion
Pondini's Blog: Time Machine - Troubleshooting -- B5. Would you like to inherit (or re-use) the backup . . . ?

My application exe does not allow any other exe to be opened above it.

Hello All.
I want to ask that when my application exe runs, it does not allow any other program or any other exe to be opened above it. Instead other exe opens but behind that and my exe always remains at the top. Is there any way so that i launch any exe,and it opens above my application exe.
Regards.

Choose 'Never' for the floating style of your panel.

My iphone 4 bluetooth does not discover any other devices or phones having bluetooth and ofcourse does not pair with other bluetooth devices or phones? How can i transfer files to other devices through bluetooth? Thanx

My iphone 4 bluetooth does not discover any other devices or phones having bluetooth and ofcourse does not pair with other bluetooth devices or phones? How can i transfer files to other devices through bluetooth? Thanx

you can't tranfer files with the built in program that apple gives you, you may (i belevie) download an app that allows you

TS1363 after up dating to 11.1.5.5 itunes does not recognized any of my devices. I've tried everything listed.

after up dating to 11.1.5.5 itunes does not recognized any of my devices. I have tried all the recommendations in help.

Updating the USB driver did work. Referenced in other postings as Section 5. I guess I had not tried that one.
Thanks

File Data Source: does not support any other host except LOCALHOST?

I am using US 1.0.3.
This exercpt is from the OTN iLearn Subscribed course titled "Oracle9i UltraSearch New Features" on operating system file access:
"The file protocol is used only for the machine that launches the crawler. You can not specify any other host for this kind of URL, except LOCALHOST."
Does it mean that US 1.0.3 can not be used to search other file servers on the network? For example, we have US 1.0.3 installed on a server S1 which is on a network with other servers (e.g. S2). I want to use US to search files in the folder myDir on server S2. So I tried to create a file data source with this URL:
file://\\s2\myDir\
But I got this error:
Invalid file protocol URL: file//\\s2\myDir\
Hostname of the file URL "file://\\s2\myDir\ is not "localhost".
My question:
(1) Can US 1.0.3 search files on a different server than the one US is running on?
(2) If so, how to specify the URL using the above example for it to work?
(3) If not, how about the newer version of US, 9.2 or 9.02? Can they be used to search files on other network servers/drives?
(4) If no to question (3), is there any plan to support this in the future version of US?
My comment: Not able to search other servers really limits the userfulness of US. I really hope Oracle will consider adding this capability.
Thanks!

More on my previous questions:
Since I posted my previous question, I have read on the 1.0.3 online help that we can define remote crawlers to crawl "on a remote machine other than the Oracle Ultra Search database". So I assume this is how to make US to search on other servers. In the online documentation it also includes the following paragraph on "Remote Crawler Profiles Page":
"Use this page to view and edit remote crawler profiles. A remote crawler profile consists of all parameters needed to run the Ultra Search crawler on a remote machine other than the Oracle Ultra Search database. A remote crawler profile is identified by the hostname. The profile includes the cache, log, and mail directories that the remote crawler shares with the database machine. "
The Remote Crawler Profiles Page, however, displays only remote crawlers already defined and the page seems to be used just for editing the porfiles of these defined remote crawlers.
My questions:
(1) How do I create the remote crawlers and defines the profiles in the first place?
(2) Where can I find more documentation on remote crawlers?
(3) Once the remote crawlers are set up, how do I specify the file URLs for each remote crawler?
(4) With US9.02 or 9.2, does remote crawler work the same as in 1.0.3, or are there any enhancements?
Thanks!

IMAC can not see any wifi networks at all?

IMAC can not find any wifi network at all. A few days ago the Imac suddenly had no wifi and on turning the WIFI on and off it became apparent that when it scans for wifi it can see no wifi networks at all. I have several other computers and they all see the wifi networks fine. I assume it is a hardware issue but the hardware test I preformed comes up with no errors. Anyone got any ideas?

Hello Sage10,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628?viewlocale=en_US
Best of luck,
Mario

MAX 5.0.0 does not see any NI software

I am upgrading a very old test system to a new motherboard. I am loading a hard drive from scratch since the old system used a PATA drive and the new system uses a SATA drive. Since this system has been in use for over a decade I also thought loading from scratch would be a good idea.
I load everything up in this order:
Windows XP (with updates to SP3)
MAX 5.0.0
NI-DAQmx 8.6.1
NI-VISA 5.0.3
Traditional NI-DAQ 7.4.4 (Legacy)
NI-488.2 v2.8.0
NI-845x 1.1.4
NI-XNET 1.1
NI-CAN 2.7
CANopen LabVIEW Library 1.1.3
When I am done MAX does not list any software. My hardware shows up fine. (PCI-6013, PCI-6025E, PCI-8512, PCI-GPIB)
Note: My system includes an 8 port serial card and while the ports do list under the MAX hardware section (COM3-COM10) it seems like my software can only access COM1 and COM2. If from within MAX I try "Tools" -> "NI-VISA" -> "VISA Options" nothing happens. I take this as a sign that not seeing software within MAX is at the root of my problem.
Also, the "Tools" -> "Reset Configuration Data" option is not there although it is supposed to be in MAX 5.0
As far as I can tell everything I am using is compatible. I don't have many other options since some of my software uses Traditional NI-DAQ.
What are my options?
Try something else to get MAX 5.0 working? Install MAX 5.1?

Good point - I should have mentioned that I did do that before installing any of the NI software.
BTW: Installing MAX 5.1 did fix the MAX not seeing software issue (still not sure why though) but did not help my COM port problem.
My programs that use COM1 or COM2 work fine but my programs that use COM3-COM10 do not. If I transmit data on COM3 within MAX using a test panel the data gets sent but when one of my programs sends on COM3 it does not. Really not sure what is going on.

PC does not see Mac on network

I can see my PC shared folders on the Mac but the PC does not see my shared folders on the Mac, in fact it does not see the Mac at all.
Does anyone have any idea what I am doing wrong?

System Prefs --> Sharing --> File Sharing --> Options --> Share Files and Folders with SMB
Then choose which user you want to allow access.

Satelite A30 does not see any other network devices in WLan

Similar Messages

Maybe you are looking for