Satelite C660 - HDD firmware update question

I have Satelite C660 with hdd: MK3275GSX, firmware: v.GT001M. On other website support site I found firmware update to v.GT002D ( [link|http://www.dell.com/support/drivers/mw/en/mwdhs1/DriverDetails/Product/latitude-e6330?driverId=FP21C&fileId=3126089791&osCode=W732 &languageCode=en] ).
Can I use this update?

Thank's for your reply!
I never update firmware of hdd or any other PC component, except BIOS too.
Must say that when I asked this question, I did not check which version of firmware exactly I have.
I know that this is GT001, but last letter I do not remember.
I checked it yestarday and was letter 'M' -> GT001M! My current version is GT001M, update is only for GT001D or GS001D.
So this question is removed.

Similar Messages

Windows 7 x64, MacBook Pro, frequent CHKDSK after HDD firmware update

Hello, I have been having filesystem problems on my Windows 7 partition since the HDD related firmware update (the latest Performance update) was released and installed onto this mid 2009 MacBook Pro.
The HDD is a 500 GB 7200 RPM model, but it never gave me any troubles under OS X before the "fix" and I know other users had intermittent problems with the HDD on their MacBook Pro's related to the HDD making noises and pausing.
The fix was released, I installed it and I started seeing my first problem in Windows 7 x64 a few days after... I cleanly shut the OS down, but when I booted it back it asked me to perform a coherency check to the Filesystem... I thought that the problem was related to the fact that I was using the RC1 build of Windows 7... although that problem never manifested itself in the weeks before the Performance Update (HDD firmware fix) was installed and Windows 7 x64 RC1 had been on there and used frequently.
I recently purchased Windows 7 retail a few days ago and after a bit of trouble-free operation I started having problems again... always shutting the PC down carefully and I was asked to run the CHKDSK utility at boot twice already.
What to do?
Message was edited by: Panajev

Hi there,
I have a different experience. I installed Windows 7 before the "performance update 1.0" came out. I actually experienced the chkdsk launch problem with Windows 7. I had done repartitioning and clean-install several times but cannot solve the problem. So I tried to install XP and Vista on my MBA (Mid 2009 with SSD) and found that these two OS doesn't introduce such problem.
To be honest, I'm not sure which caused such problem, Windows 7, a bootcamp driver, or EFI. But I'm sure that CHKDSK in Windows 7 has an obvious bug that needs to be patched (memory leak and maybe this problem as well). So now I'm using Windows Vista SP2. And I'm happy with Vista SP2 (seems to become faster and stable now).
Cheer,
Message was edited by: nicegom

Firmware update question

Does anyone know if it is only possible to update the firmware on macbooks from within the OS? or is there some kind of audit mode as there is with winxp?
Reason I'm asking is that when the HDD is changed we are currently having to reinstall the OS, set it up, and then update the firmware. But we are wanting to leave the unit with no user account setup, as it is when you first install OSX.
Does anyone know of a way of doing this at all?
Cheers

Hi Chris,
Welcome to apple forum.
Honestly I have no idea how to update firmware like in dos mode on PC for this macbook and you cannot go to software updater until you set up a user or admin.
maybe this verbose start up might work:
http://docs.info.apple.com/article.html?artnum=106388
But since the firmware updater is permanent, maybe you can install the os X, create a user, update the firmware until it is done and wipe the HD and reinstall the os x until "no user set up" step as you want.
And the user will get up to date firmware and user setup login when they turn it on for the "first" time.
Good Luck.

GSA-H60L DVD Writer Firmware Update Question

Hello all.
i have a dvd writer here that needs to be updated.
The model number is HL-DT-ST DVD-RW GSA-H60L.
The trouble is that the firmware updater needs a Windows Vista 32 bit system to work, but i don't have one available at this time.
Is there a workaround for this?
Thanks.

Hello hesdeadjim,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that you have a DVD writer that needs to be updated, and I would be happy to assist you! To begin, I will need to ask you a few questions:
What is the Product and Model Number of your desktop computer?
What version of Windows do you have installed on your computer?
Has your computer completed all of its important Windows Updates?
Is this an on-going, or recent issue?
Have you updated all of your HP drivers using the HP Support Assistant?
Did your DVD writer come with your computer, or was it a later addition?
Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
Cheers!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

N80 firmware update question...

I think I have read this in other posts but am unsure how valid it is...
I have several N80 handsets 2 of which were Vodafone UK but have subsequently been unlocked by Vodafone.
The firmware versions are both v4.0623.0.41
26/02/06
RM- 92
NOKIA N80 (42.03)
IF I take these to have their firmware updates done, does that then mean that they will revert back to being locked to the Vodafone network or does it stand that once a handset is unlock/network free that it remains as such?
JG
If it isn't fun you are doing it wrong
N95, N80, N73, P990, P910, P900, 6230i, K750i, 8210

hi jg01
There are two issues here:
Firstly once unlocked a BB5 remains unlocked.
Secondly because they have a "Vodaphone" product code (label under battery) if you use Nokia Software Updater it will check which is the latest Vodaphone release software for your phone (not the latest generic software)
Nokia Service Centres used to be happy to upgrade with latest generic (non-operator branded) software, but I am not sure whether they have tightened up procedures now and insist on like for like software. I am sure somebody else will give you the definitive answer!
Happy to have helped forum in a small way with a Support Ratio = 37.0

IPods and firmware update question

It happened.
I wait, wait, wait and finally buy an 80gb for $350 and a month later 160gb for less comes out!
The only new feature I like is the album cover browse...text listing doesn't mean anything to me for over half my collection - I KNOW my album covers though.
Is there any plans for a firmware update that will bring my 80gb iPod the ability to operate similar to the new releases of today? I'd like the album browse feature on my 80gb...

If it wasn't so difficult and hidden to find out how to contact them directly, I would. Thanks for your answer! I hope it's wrong though...
To your knowledge, have they ever had firmware updates for any product?
Also, to your knowledge, do Apple reps browse these discussion forums? Maybe someone will accuratley respond.
Message was edited by: justhaveonequestion

IPod Touch firmware update question

I have a first generation iPod touch. I finally purchased the 3.1.1 firmware update, and it's downloading now. When I made the purchase, a warning flashed, telling me that when I update the iPod, all of the data on it will be lost. It said that if I wished to keep my music etc., I should make sure it's connected to the computer I usually sync it with.
Now, I suspect that it's just going to update the iPod's firmware, then sync it with my current iTunes library. The thing is, only about half of the music that's on this iPod is on this computer's hard drive. I don't wish to lose the other half.
So, does anyone have any experience with this? If iTunes will back up the data on my iPod, and then restore it once it's done updating, that would be fine, but that doesn't seem like the sort of thing that would happen...
Should I just download copytoy and backup all the songs, then restore them after the update? Thanks.

Thanks for the response. I now have a slightly more serious problem, though, which I doubt can be helped, but I figure I may as well ask anyway. Here goes:
I was looking for a program to extract my music off the ipod to make a backup as you suggest. (Back before I had an iPod touch, I used yamipod, but that doesn't have touch / iPhone support.)
One that looked promising was called Sharepod, so I downloaded it, and launched it. It told me that I shouldn't run both iTunes and sharepod simultaneously, so I closed iTunes. Then it told me that it didn't detect any iPod, so I should re-open iTunes with the iPod connected, then restart Sharepod.
When I opened iTunes back up, it told me that it couldn't read the data on the iPod, and that I should do a factory reset to fix the problem. (This of course will erase the data.)
So now I'm pretty much stuck. I can't get iTunes to read my iPod, and as long as it can't, neither can sharepod. The only way I can get iTunes to see the iPod is to wipe the data, which is what I downloaded sharepod to prevent in the first place. In the meantime, the iPod works just fine, I just can't sync/update it until I wipe it, which I would like to avoid. Do you know of any way I could possibly fix this error without losing my data? I've rebooted both the iPod and the computer, and even re-installed iTunes, but no luck.
Any help is much appreciated.

Firmware updatea question

I know I need to run the firmware update on my iMac before I upgrade from OS 8.6 to OS X, but was wondering what happens if I run the update, but then don't upgrade for several days/weeks. Anything bad?

its fine. The firmware update actually wasn't created just for OS X, OS X simply requires it. its a recommended upgrade even if you don't upgrade to OS X.

Nokia 6233 Firmware Update Question

So I decided to update my phone's firmware, but I don't have the cable. So here's the question, is it possible to do this via Bluetooth instead of cable?
Thanks in advance.

20-Jan-2008 11:54 AM
pringl3s wrote:
Okay, will try to get the cable then.
You can the cables for about a fiver from eBay - that's all I used for my 6233, when I had it.
5800 v20.0.012 -- 6500s v9.40 -- 6233 v5.43 -- 5140 v3.13

Airport Utility and AEBS DB firmware updates question

I have an AEBS DB2 version set up with a MBP Airport Utility which came from the install cd of the AEBS, which was Airport Utility 5.5 and the AEBS DB2 had firmware 7.5. I did update to 5.5.1 and 7.5.1, respectively and all is fine. However, I have another MBP that is just set up to use the wifi signal. I noticed that it also wanted to pull in the AU 5.5.1 update even thought I never installed the AU from the AEBS cd. I am wondering if 5.5.x, which could only be gotten on the cd, is now just the standard and it doesn't matter. Or, did the other MBP just know it was using a wifi AEBS and thus Apple set it up to find that newer update..after all, It never found a 5.5 before...it was just using whatever upto 10.6.2 had installed.

I noticed that it also wanted to pull in the AU 5.5.1 update even thought I never installed the AU from the AEBS cd. I am wondering if 5.5.x, which could only be gotten on the cd, is now just the standard and it doesn't matter.
Interestingly, when 5.5.1 became available via AU, it also showed up for Macs & PCs via a download from Apple Support - Downloads site as well ... and you're right, v5.5 is only available from the CD.

Simple CDRW Firmware update question.

I recently updated the firmware to 160 which helped with compatibility.
I am about to reformat and update to XP. I have the new 52x24x52 CDRW.
Will I have to update the firmware again after I reformat and upgrade operating systems?

not at all that data is now on an eprom chip inside the cdrom,and only flashing another should ever change it

Nokia N80 Firmware Update Question - Looking for F...

Hi,
I've been looking for the latest Nokie N80 internet edition firmware. I know that the firmware version 5.0719.0.2 has been released but when I try to update my phone using Nokia Software Update program it tells me that my phone has the latest version.
My phone firmware version is V 4.0623.0.42, released 20/09/2006, RM-92, Nokia N80 (85.01). Does anyone know where and how can I update my phone with the latest version? Thanks.

I have an N80 which I was able to update a few months ago to 4.0632.0.38 (Which added all the Internet and Browser updates provided for the N80IE) then when I heard version 5 was out I tried, but no use, and since then it always says I have the latest version.
I bought a SIM Free model from Expansys UK so it's not a operator issue, not sure why it's stuck on version 4. Emailed Nokia Support a few weeks ago but heard nothing back
My Product Code is: 0535762
Phone Type: RM-92
Model: N80-1
Anyone from NSU team able to help out?
Thanks,
Brian.

P780 questions - Firmware update question

I received notification about new update for formware "P780_ROW_S112_130717_TO_P780_ROW-S115_130817". Where can I find the what all problems fixed by this update and what features introduced in this update? Have any of you done the update? Can you please share your experiences?
Thank You
Sun

Hello,
Can someone please reply? Why cannot Lenovo publich the fixes? This is the type of support that can differentiate Lenovo from others. Please do the needful ASAP?
Thank You

Cisco 5508 Firmware update 6.x 7.0.98 Questions

Hi guys,
Have not done an update on any cisco gear since about 2001
We have a cisco services contract with IBM that supplies us access to the usb drivers, firmwares etc, and we have a Cisco 5508 6.x running ~30 Cisco 1252's, some 1231's and (potentially) some 1262's once the firmware update is done.
We have a base-count license(permanent) of 50AP's, no expiry
So I guess my questions are:
1) When flashing the new firmware - do the licenses require any sort of modification, or will they work as per normal
2) Are any serial numbers or codes required to be entered once the 7.0.98 firmware is installed?
3) I assume that the old firmware/config becomes 2nd in line to the primary boot option of the firmware during boot process?
Thanks

7.0.98.0 is deferred code.
Browse to deferred release on bottom:-
http://www.cisco.com/cisco/software/release.html?mdfid=282600534&flowid=7012&softwareid=280926587&release=7.2.110.0&relind=AVAILABLE&rellifecycle=ED&reltype=latest
Deferral Notice:-
Wireless Lan Controller (WLC) software version 7.0.98.0 is being deferred due to the following issue :
CSCtj21464 - WLC data plane core crashes, causing WLC reboot
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7_2.html
5500 supports 7.2 code but AP 123X is not supported on 7.2, And 126x supported from 7.0.116.0 code. it is suggested to update to 7.0.235.0.

Firmware update failed hdd not recognizing now

my 1tb mypassport was working perfectly fine untill i tried to upgrade firmware. it failed and now hdd is nor being recognized. no ticking sound. lifht turns on windows vive usb conection sound but nothing appears no error or driveplz help me.i have very iortanr data on itthanks

The drive is probably bricked. I only do the firmware updates if there is a problem with the drive or a security issue. Sometimes if it ain't broke don't fix it is the best policy!Joe

Satelite C660 - HDD firmware update question

Similar Messages

Maybe you are looking for