Satelite L500 Support, New hard drive

Hey,
So basically a few weeks a power surge overloaded my hard drive,
Unfortunately i have lost my receipt so i couldn't claim warranty and had to go to a repair shop.
So the repairs were fine, no drama.
But basically, rather before where i'm pretty sure i had vista installed, they installed Windows 7,
But the problem is that i lost a fair few of the features, like the built in webcam centre, so i can't use my webcam anymore, and my usb ports wont seem to work. As in i plugged in a usb mouse and i doesn't even recognize it, It doesn't even show up in device manager.
Is there anything i can do? i'm not sure if restoring factory settings will even work, considering that i have a completely new hard drive.

Hi Danhawk1223,
> i'm not sure if restoring factory settings will even work, considering that i have a completely new hard drive.
If you mean restore from Toshiba recovery disk it will work!
Toshiba recovery disk can restore factory settings all the time, even on a new HDD with other capacity. That makes no difference. Only important point is that you are using the recovery disk that you created yourself because its exactly for your notebook model.
Absolute advantage of recovery disk is that all drivers and tools will be installed automatically and you dont have to do more. It happens automatically and your notebook is ready to use again! :)

Similar Messages

Where can I buy a larger hard drive for my late 2008, 15" macbook pro? From reviewing questions and answers on the support community it would appear that having Apple remove the old and install the new hard drive is recommended. But how/where?

Where can I buy a larger hard drive for my late 2008, 15" macbook pro? From reviewing questions and answers on the support community it would appear that having Apple remove the old and install the new hard drive is recommended. But how/where?

Welcome to Apple Support Communities
You can install the new hard disk yourself if you want to. You just need a 2'5" SATA II hard drive, which is compatible with your MacBook Pro. You can buy one at OWC > http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/ You can filter hard drives by computer, so press a "Click to view all...", choose your computer in the sidebar and it will give you the compatible hard drives.
There are different brands for the MacBook Pro. The most recommended are HGST and Seagate, which have good reputation. A 7200 rpm hard drive will give you extra performance

I installed a new hard drive and trying to reinstall FCP2 and on the install disc i get the following message - "You can't open the application FC Studio.mpkg because power PC applications are no longer supported"

I installed a new hard drive and trying to reinstall FCP2 and on the install disc i get the following message - "You can't open the application FC Studio.mpkg because power PC applications are no longer supported"

Because you are running lion.. FCS 6 is a Power PC app and Lion doesn't support Power PC anymore.. So you can't install it.. Three options..
1. Revert back to Snow Leopard.
2. Purchase FCP X...
if you can't stand FCP X
3. Call apple directly, 1800-MYAPPLE and ask to purachse FCS 3 for $999... (its FCP 7)
I just got FCS 3 today through apple phone sales..

I tried to reload a previously downloaded CS3 program on to my new hard drive and this is the message when I click on the english link for Mac products: HTTP ERROR: 404 /support/downloads/dlm/main.jsp RequestURI=/support/downloads/dlm/main.jsp

I tried to reload a previously downloaded CS3 program on to my new hard drive and this is the message when I click on the english link for Mac products: HTTP ERROR: 404 /support/downloads/dlm/main.jsp RequestURI=/support/downloads/dlm/main.jsp

Make sure you have cookies enabled for your browser. Try using a different browser if the problem continues.

Will the new 2012 iMac support 2 hard drives (HDD and SSD) like the 2011 iMac?

Will the new 2012 iMac support 2 hard drives (HDD and SSD) like the 2011 iMac?

Well, I'm not sure how anything can fit into a 5 mm depth, so I can see why they've removed the CD drive - there probably wouldn't be enough room for the laser, LOL. Can't imagine speakers, hard drive (of any flavor), logic board and so on and so forth. Fortunately, my iMac has Applecare through early 2015 so I'm set for a while; I may check out a Mini at that point - saw that it is configurable with a fusion drive, which would make it interesting for me.

New Hard Drive

After installing Leopard on my new hard drive (Western Digital Caviar Blue) I used Migration Assistant to transfer everything from the original hard drive that was still in the computer. It ran into some issues with 2 iTunes music files and transfer stopped. So I selected the option of continuing to set up. Not sure if I messed up there. After that was complete I trashed the files in question and ran Migration Assistant again, but it completely skipped iTunes and went onto Applications, where once again it ran into problems with Application Support Files from Adobe/InDesign Templates, etc.
Now I'm not sure what to do. The new HD is the 10.5.6 version (didn't run Software Update because I assumed Migration would automatically update everything) and of course the original HD is the 10.5.8. Should I run Software Update first on that followed by Repair Permissions then attempt to transfer everything again? Or should I start from scratch - erase and reinstall then run Migration again?
Also, with having a very large iTunes library is this the best way to transfer those files?
Thanks!

Hi-
Sorry, I may have been a bit obscure....
To be precise, one should boot to the OS X install disc and use Disk Utility to repair the original hard drive and permissions.
You can't repair the boot drive while started to it.
Permissions, yes, but not directory repair.
After that, restart to the usual boot drive, download and install SD!, let SD! do it's thing.
SD! will erase the target drive for the new clone, so using Disk Utility again isn't necessary.
Once SD! is done, you can open System Preferences/Startup drive, and select the new clone as Startup volume.
Restart, and check that all is as it should be (there is no reason that it shouldn't, but DO check).
Once the clone has been verified for function and content, you're all done.
A full clone of a large drive can take a while, so don't do this when you're in a rush.
Maybe start SuperDuper! and go have dinner or something......

Have found multiple iTunes Library.xml files. Moved Library to new Hard Drive and it needs to be completely rebuilt?

Hello. I have a Mac Mini operating Mac OS X 10.7.2. I recently had to move my iTunes Library to a new hard drive. I followed the directions on how to move the library and refind everything yet when I do so what comes up is a mere skeleton of what I had. I have had to hunt down my purchased Apps, Music and Movies and re-add them to the library. I also noticed in doing this I have multiple iTunes Library.xml files ... shouldn't there only be one? If so how do I clean this up without doing any accidental damage (i.e. how do I find the one that is being used and delete the rest?)? If I delete the others is there any risk of losing purchased content? Lastly syncing my iPads has become a nightmare as I get the "This iPad is currently synced to another iTunes library" message. Obviously something

It's hard for me to picture the exact situation. It sounds like you still have your library file on the internal but some files on the external, and maybe some on the internal, some of which are in the library and others not... By re-adding things after consolidating it may have made things into a hodge-podge. Yes, that article you referenced says: "iTunes for Mac: Moving your iTunes Media folder"with Media Folder being the emphasis. You probably should have just moved your whole iTunes folder. Still, moving the media folder as instructed should not have messed up the library. Did you make the mistake of starting up iTunes before the external drive had mounted fully and it then told you it couldn't find many files? How you proceed to sort it out will depend upon how much time you want to spend and how important things such as ratings and playcount are to you. I have not actually used the consolidate feature across different drives myself (and don't feel inclined to do so here to test ).
If you are in the USA you can download some previous purhcases with iCloud, but not all.
Here's a bit on what an iTunes folder should look like:
What are the iTunes library files? - [http://support.apple.com/kb/HT1660]
More on iTunes library files and what they do - [http://en.wikipedia.org/wiki/ITunes#Media_management]
Library files with graphic and explanation of different iTunes versions - http://discussions.apple.com/message.jspa?messageID=13169517
Once you get iTunes working off the external drive it should just put new media to the external when you add it.
I have almost no experience with synching (I synched my neice's iPod, once, about 4 years ago).

How can I restore my iPod touch data to a new hard drive when the old one crashed

My computer crashed and I want to put the contents of my iPod Touch back on the new hard drive. How do I do this without accidentally Syncing and copying over my data? The vast majorioty of the music on my iPod is my own from DCs I own.

You should probably disable the autosync functionality first by going to Edit -> Preferences, clicking the Devices tab, and enabilng the prevent iPods,iPhones, and iPads from automatically syncing option.
Next, authorize the new computer with your iTunes Account. In iTunes, choose Store -> Authorize This Computer and enter in the correct credentials.
If possible, either copy a backup file from your old computer to your new one or create a new backup of your iPod in iTunes before letting it sync. To do this, right->click on your iPod Touch from under the Devices section in the left hand pane of iTunes and choose Backup. You might also want to take a look at this article to see what it all included in the backup.
http://support.apple.com/kb/ht1766
Now onto synced content such as music, videos, photos, etc. For iTunes purchases you can copy them back into iTunes by choosing File -> Transfer Purchases. For all other nonpurchased iTunes content, see this older post from another forum member Zevoneer covering different software availbable to assist you with this task.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
Once the backup has been made and all other synced content such as music, videos, and photos are back in your iTunes library, restore your iPod from that backup you made earlier. Here is more on backing up and restoring your iPod.
http://support.apple.com/kb/ht1414
B-rock

I had to install a new hard drive because my old hard drives boot files became corrupted, and i want to get all of my music files off the old hard drive and regain all my play counts/ratings/playlists

Greetings everyone
as the title says, ive had to install a new hard drive and i want to transfer my old itunes library onto the new drive, maintaining all playlists/play counts/ratings etc, album artwork if possible. The old hard drive is installed as a slave drive and is completely acessible, but due to the boot files being corrupted i cannot use it as the main drive and therefore operate my old itunes. Also, my ipod no longer contains my music library as itunes synced without my permission and wiped it.
The only thing i have tried is copying all of my old music files from the old drive by selecting 'add folder to library' and then the old drive, then replacing the new itunes library.itl file with the one from my old itunes. This restores all my playlists and playcounts but when i try to play any of the songs it says that the files could not be found, and i dont fancy locating 8500 music files individually!
Thankyou for taking the time to read my post, any help will be greatly appreciated.

Ah, my reply was based on the assumption that you had a default installation of iTunes.
i.e you had all your music in the iTunes media folder inside your iTunes folder.
If your iTunes folder is so small compared to the amount of music you have, you must have a different arrangement.
This complicates you situation considerably.
iTunes can cope with moving around as long as all the music is in the iTunes media folder, not not if it isn't.
Your first step should be to get iTunes working on the old drive. This will involve editing the xml library file so that the drive letter is correct and then rebuilding the library from the xml file.
Then you will need to consolidate your library which moves everything into the iTunes media fodler. After that you will be able to use my first suggestion.
Step 1
Find the iTunes folder on the old drive and copy the two library files somewhere else so you can find them again. That's iTunes Library.itl and iTunes Library.xml.
Now open the copy of iTunes Library.xml with WordPad.
Look for lines starting:
Location
These contain the paths to tracks.
You will need to use a find/replace to change the drive letter so that it is correct.
Make sure that you include enough in the "find" so that you only change the right thing.
Maybe /c:/ and replace with /d:/ or whatever.
After that, tell iTunes to use the library on the old drive with a shift key start.
Hold down the shift key and start iTunes, keep holding the shift key until you are prompted to choose a library. Navigate to the iTunes folder on the old drive and choose iTunes Library.itl.
Then use the method in the following article to rebuild your library;
http://support.apple.com/kb/HT1451
Unfortunately the date added will be today for all tracks.
If iTunes works correctly after this, consolidate your library
File>>Library>>Organize>>consolidate
This copies all tracks into to iTunes media folder and could create a problem if you do not have disk space so don't do it if you are unsure about free disk space.
Check that iTunes works OK and then use the first method.
Message was edited by: polydorus

System restore on DV6 not working after new hard drive installed (Vista 32-bit)

Hi there,
I have a HP Pavilion Entertainment laptop (DV6 1210sa) and recently on start up I have been receiving a message saying that the hard drive is at imminent risk of failure. I therefore burned the restore CDs and bought a new hard drive: (A Toshiba 2.5 inch 80gb SATA hard drive 5400 RPM). The first part of the restore completes successfully then the HP screen appears after a restart and then goes to install windows, but before this begins I receive a message saying “Windows setup could not configure windows to run on this computer.” I then have to restart and get the same message. Is this drive somehow incompatible? Is there something I’m missing?
Thanks in advance

Here are the factory specs for your HP Pavilion dv6-1210sa Entertainment Notebook Computer. Based on the specs, the original hard drive was 250GB. This could be a factor in your issue. It could also be that the drive is an advanced format (AF) drive. Please provide the model of the drive for our review.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Trying to Restore new hard drive via TC backup

I purchased a new Seagate 750GB hard drive to replace the 500GB hard drive which only had 19GB of free space available. I installed the new hard drive in my MBP 17" and here is where I am unsure if what I did was correct.
I inserted the original MAC OS X Install DVD (v. 10.5.7). 4 months ago I upgraded to v 10.6.8 but for some reason I cannot locate the disk so I inserted the orignal that with my MBP. I should say that I back up my MBP to my TC wirelessly but my initial backup of the entire hard drive was originally completed via CAT5 connection.
After I inserted the original install DVD I chose the option in Disk Utility to Restore From Backup. I went through the back up process overnight and this morning the restore was completed. I click on the button command to reboot the computer and it began the process of rebooting.
Upon rebooting a blank screen popped up with several lines of data (data looked like it was in DOS form) and the a box with a message that said "Your computer must be restarted). It had this message displayed in several languages.
If someone can help me with the following I would be very appreciative.
1. Direct me to the procedure for restoring my MBP using the most recent back up on my TC.
2. How do I override the message on my MBP that says I need to restart my computer. I restart it and the message keeps popping up.

In your Applicaiton's > Utilities folder is a program called Disk Utility.
It manages and repairs drives, sets up partitions, erases drives and partitions, changes drive formats and other things, like repairing disks and permissions.
"Permissions" are per file codes that prevent other programs from reading and/or writing and/or changing the data the file contains. If a program doesn't have permissions to access a file it can't do anything harmful.
It's this permisisons based operating system that gives OS X's "Unix" such excellent security protection.
When a clone occurs, or even a Software Update (under the Apple Menu), you give the program your admin password, which allows it to make permission file changes. Or how else can it clone the whole drive or update the operating system right?
It's these changes that likely need to be changed back to their original settings as a double check just to make sure.
Before you go seriously changing things around in Disk Utility, make sure you know what your doing.
Erasing of data can occur there, but not to your boot drive while booted from it as it won't allow it.
However while booted from the 500GB drive, you do want to erase and reformat the new 750GB drive and rid yourself of the 10.5 install you did there as it's useless (grab a copy of any files you made there first)
https://support.apple.com/kb/ht1782

I had to install a new hard drive on my computer, when I downloaded itunes back onto my computer, none of my songs were there. how do i get them back??

I had to install a new hard drive on my computer, when I downloaded Itunes, all my music was gone. How do i get my music back? I do not have an Icloud.

Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you plea

I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?

You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. After you finish Setup Assistant will complete the installation after which
         you will be running a fresh install of OS X. You can now begin the update process
         by opening Software Update and installing all recommended updates to bring your
         installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Recovery discs do not work with new hard drive

Hi I have come here desperately seeking help as I am not too knowledgeable with the workings of computers and I have spent an incredible amount of time just trying to get my laptop to some level of functionality. I purchased a HP Envy and it had a corrupt hard drive which would not work from day one, laptop was new. After a year of constant pressure on HP they finally decided to replace it and let me choose any laptop so I went with the Beats Envy 14 as it was the best one offered from the selection. Low and behold the thing would not work properly from day one, again my brother who is much more of an expert said that there was definitely a hard drive issue so for the past 3 years I have put up with a computer that constantly crashes with BSOD, where I have lost data on numerous occasions (only so often I can back up), that I have had to constantly reset the thing using HP recovery discs, and that generally cannot cope when performing multiple tasks. HP are most certainly shocking builds from my experience. Then just last week the hard drive just craps itself and the laptop no longer will boot up. I took it to a guy to get it at leYst working again so he has installed a new hard drive but with an old version of Windows 7. I want to go back to the Windows version I was akin to on the HP recovery disk , and essentially have it all set up as before except for now having a workable hard drive however I get the message: "This computer is not supported by the System Recovery Discs.You will not be able to continue to recover this system with these discs.Error: 0100 - 3385 - 3078" I also tried out of interest to load my old Windows 7 disc I had and XP but had no success. Tried booting from startup etc and various things suggested on help forums. Please tell me I am not stuck with this version of windows. Whilst the discs included Windows 7 it was a totally different version, this home premium one is terrible. Any help/advice would be gratefully received. Thanks

no they were both 500gb. I read about that already, I heard about creating a partition for recovery etc but this is all a bit above me , as I said I am not very technical when it comes to the working of a computer. These discs worked perfectly before but now with the new hard drive will not load at all. I essentially hate the Windows Home Premium verions the guy who fixed it put on, whilst the discs had Windows 7 on them the icons were way smaller, the desktop neater, the buttons different, everything was a lot more modern and I was used to it. This version looks like something from the 90s, have to constantly adjust size of Mozilla when browsing as it is huge. I have my own version of Windows 7 on another disc but the hard drive will not let it load either........considering waiting for Windows 10 but again unsure if this new hard drive will even let that update Thanks

HT1386 I have had to have a new hard drive fitted to my Apple Mac and now I can't sync my music with my iPhone, it thinks it's a new computer. Please help, What do I do?

I have had to have a new hard drive fitted and now I cannot sync my Iphone with my Apple Mac, thinks it's a new computer. Any ideas Please?
Alan C

I keep this as a copy and paste. It's the same process for Mac as it is for a PC. Read it over and see what you think. Post back if you have questions.
The following was copied from this thread. This is essentially what you want to accomplish.
https://discussions.apple.com/message/11527071#11527071
1) Without connecting your iPad to your laptop, start iTunes. Click on Preferences. Click on Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
2) Now connect your iPad to your Mac and start iTunes.
3) When iTunes starts, right click on your iPad under Devices in the left column. Select Transfer purchases etc.
4) After it finishes transferring all your apps to your new laptop, right click on your iPad and select Backup your iPad.
5) After it finishes backing up your iPad, right click on your iPad and select Restore etc.
6) After it finishes restoring, left click on your iPad , then click on the Apps tab on top, and check the box next to Sync Apps, then click on Apply below.
If everything on your iPad looks good after the sync, go back and click on iTunes / Preferences / Devices and UN-check the box next to Prevent your iPod etc. The only other thing you may want to check is if your contacts, bookmarks, etc. are syncing correctly now. If not, go to the Info tab after connecting and make sure you indicate which features you want to sync with what sources.
Read this thread and the support links as well. There are apps that you can purchase that will allow you to transfer photos from the iPad to your PC. Look at Photo Transfer App in the App store and you can search for others as well.
https://discussions.apple.com/message/13016026#13016026
This support site will help you with transferring iTunes music to your new computer.
http://support.apple.com/kb/HT4527

Satelite L500 Support, New hard drive

Similar Messages

Maybe you are looking for