Satelite M300-D4316 - wireless network detected but can't connect

Previously I could use wireless LAN on my laptop but last week since I registered a bluetooth connection, wireless connection doesn't function anymore.
It can still detect wireless network around me; I fail every time when I try to connect, & it asks me to diagnose the problem & says something like 'signal is too weak'.
I'm pretty sure that it's not the problem of the wireless service- all my friends can connect to it!
What should I do?

Maybe the Wireless LAN was toggled off?
Try pressing Fn+F8 to toggle the Wireless Devices.
Also ensure the Wireless Switch is turned on at the front/side of the notebook.

Similar Messages

  • G780 wireless stopped working; networks found but can't connect

    I have a G780 bought early this year. It came with Windows 8, which I am still using. Everything was working just fine until today. All of a sudden I can't connect to my wireless networks (I have a router that can have a "guest network" in addition to the normal one, and I can't connect to either of these). I had been fiddling with some of the settings last night, but everything had still been working fine. I can connect with other devices so I know the networks are working.
    The networks do show up in the list of available networks, but whenever I try and connect it just doesn't work. To make sure I wasn't just typing the passwords incorrectly I tried disabling all security on one of the networks (so it was a totally open network with no password), and the laptop still can't connect. I've tried restarting the wireless router, restarting the computer, updating the driver for the wireless card, uninstalling the drivers and reinstalling them, enabling and disabling the wireless card, unchecking the option to allow the computer to turn off the wireless card to save power, and as a last ditch effort I even did this Windows 8 "Refresh" option which uninstalls all programs you've installed and resets options to the defaults. That also included uninstalling my antivirus program, so I've tried connecting without that, too. Nothing has made any difference.
    Edited to add that I also downloaded and ran the diagnostic tool from the Lenovo site for my laptop and version of Windows for wireless networking issues and it didn't show anything.
    I would really appreciate any insight as to what to do next. I'm pretty much at my wits' end with this.
    Solved!
    Go to Solution.

    hi Maltiriel,
    Thanks for using Lenovo Community Forums!
    Can you try doing a system restore, maybe set it 2 days back or when you last work with the Wireless with no issues,
    If that doesn't help,
    Pull up the page on the right where it shows you all available wireless networks,
      > Look for your Network and do a right click make sure you "Forget" the network first,
      >Now Try following this Article and Connect to your Wifi Manually,
    http://www.op97.org/technology/documents/1HowtoManuallyConnecttoaWirelessNetwork.pdf
    Can you also share what it says when you connect to your network
    thanks,
    Best Regards
    Solid Cruver
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • HT1178 Do I want to create a new wireless network or join my current network?  I can't connect an ethernet cable to the Mac / printer and to the wireless modem at same time - in two different rooms.

    I am trying to set up Time Capsule so that I can do my first backup (after 1 1/2 years!) with Time Machine.  I have read other forums, but in each case they instructions eventually do not apply.
    I have connected my TC to my existing wireless router.  This sits in a bedroom and cannot be moved as a rental home.
    I have plugged in the TC and updated the software.
    Now - do I want to A Create a New Wireless Network (remember I can't connect the TC to Mac using an Ethernet cable). B Replace an existing base station or wireless router with TC (only intend to use for TM as don't know other benefits as of yet). or C want TC to join current network. 
    Thinking C.  If I choose C, it then asks A TC to wireless join current network (NO as already connected using Ethernet). B want to connect TC to my network using Ethernet to extend my existing wireless network. C want to disable the wireless network on this TC and connect it to my computer or network using Ethernet - CANNOT do this as devices can not be in the same room.
    Or do I want to create new wireless network - first set of questions - choice A?  What is the benefit to creating a new one when I won't be in this rental house for longer than 18 more months??
    Please help and quickly!  Thanks!

    Let me suggest some things.
    But first ask exactly what wireless router you have now and what type of broadband service?
    Are you happy with the wireless on the current router? If so, then you can plug the TC straight into whatever computer you have by ethernet, short 1M cord with no connection to the network. And use it without affecting your existing network at all. This is trivial setup.
    Although you don't say exactly what Mac and printer you are using, is it a desktop? Laptop it is definitely easier not to plug it in, but a desktop you can plug in the TC and it will all sit happily together.
    How is the printer connected and to what?
    I am not sure why you need such quick help.. this is all minor setup stuff.. and 18months in todays world is like permanent man.
    Your multiple A, B, C are more confusing than helpful.
    The best choices without more info.. are to replace the existing wireless router with the TC. ie your option B.. but how to do this depends on the type of connection. Is it cable or adsl? Can you easily bridge the existing modem router.. if that is what it is?
    Think carefully in the ideal world what would you like..
    and what do you have..
    We can probably suggest ways and means to fit what you like to what you have.. without introducing a stack of options that are doing your head in.

  • AE detects my wireless network but can't connect to the Internet

    I have a DELL PC with a Linksys WRT54G router. I recently had an Airport Express installed into my Mac Mini so that I could access the Internet wireless. Although Airport Express detected my existing wireless network, I am having problems connecting to the Internet. I read several of the helpful articles in this discussion forum and using the information I learned I was able to successfully connect. But then I accidentally tampered with the settings on my Mac Mini and now for the life of me I don't recall what I did to get back onto the Internet?
    Does anyone have any ideas?

    1. unplug the DSL
    Modem and router
    2. plug the router back in and wait for the display
    lights to indicate ready.
    3. plug in the dsl modem and wait for it to display
    ready.
    4. turn on the computer that is hardwired to the dsl
    modem and router
    5. then try to get online thru my Mac OS.
    Is this correct? Or should I do something else?
    Perhaps disconnect everything including the computer
    and attached ethernet cables?
    Close, but you need to reverse the power-on order
    that you described for the modem and router, as
    follows:
    Modem/Router Power ReCycling
    - Power-off the DSL modem, Internet Router, &
    computer(s). (If possible, leave the modem off
    overnight.)
    - Power-on the DSL modem; Wait at least 30 minutes.
    - Power-on the Internet Router; Wait at least 5
    minutes.
    - Power-on the computer(s)
    You don't need to disconnect any of the cables.
    Thanks so much for your help. Everything you suggested was right on. I am not running both my desktop PC and MAC wirelessly.

  • I have tryed to connect an AirPort Express to my wireless network. But I alwais get the errocode -4. Can anybody help. I have reset the AirPort Express and updated the software.

    I have tryed to connect an AirPort Express to my wireless network. But I alwais get the errocode -4. Can anybody help. I have reset the AirPort Express and updated the software.

    The ZyXEL P-2601HN-F1, as you know, is a combination DSL modem & 802.11n wireless router (or gateway device).
    For your goal you will want to take a look at this Apple Support article for details on how to configure an AX for iTunes.
    If you are still having difficulties with the AX joining the ZyXEL's wireless network, you can try the following:
    Temporarily disable wireless encryption.
    If you are hidding the SSID, disable that feature.
    Change the Mode Select setting to: 802.11g Only
    Change the Channel Selection from "Auto" to a set channel, like 1, 6, or 11

  • IPhone 5s can connect to wireless WIFI router but can not access internet.

    iPhone 5s can connect to wireless WIFI router but can not access internet at work. The admin says the router lets my iPhone connect to LAN, but the iPhone does not have server IP to access the internet. I entered the server IP and port number in the HTTP PROXY fields but I still can not access the web. Any ideas?
    TIA
    Rich

    You IT person should be able to sort this out.  But, they seems to be too busy or disinterested to do this.  Suggest you provide the it person with an iPhone to get interested.
    Any could be lots of things.
    The best you can do is to get access to the admin setup for networking on a pc?  The internet settings are all the same.  Only what names the manufactures change from OS to OS. Check and compare parameters.
    Phone works to internet at home, I assume?

  • Satellite L300-17L - don't see any wireless networks detected

    Hello all,
    I just bought a Satellite L300 - 17L. All drivers seem to work except for the wireless card.
    First, I installed the driver pointed by this site but I discovered that the card is actually an Intel Pro 3945 card, not Realtek as specified in the driver section.
    Now I installed the driver for the INTEL PRO 3945ABG, version 11.5.1.15 and also the PRO Set utility, and I don't see any wireless networks detected.
    I have a colleague that sees many networks using the same adapter but on a other Laptop.
    I also tested the switch on the Laptop and it is on.
    Did you experience this kind of problems on your system ? Please help me because I am really sad because of this issue.
    Thanks & Best regards
    Valentin

    Hi
    As far as I know this notebook was equipped with the Intel 11a/b/g WLan card.
    You should firstly check if the WLan router and the WLan card use the same WLan standard.
    In the WLan card properties (in device manger) you could check this settings choosing Advanced tab.
    I would also recommend checking if the WLan was enabled properly
    Bye

  • Since I've upgraded to Maverick the airpot utility does not recognise that there is a time capsule on the wireless network. I can see the TC using the air port utility on my iPhone5 and on my iPad. What am I doing wrong on my macbook?

    Since I've upgraded to Maverick on my Macbook Pro the airpot utility does not recognise that there is a time capsule on the wireless network. I can see the TC using the air port utility on my iPhone5 and on my iPad. What am I doing wrong on my macbook?

    I have over 250G backed up and I really don't want to reset everything and start again.
    Not sure what you mean here. 
    A reset will not affect any of the data on the Time Capsule hard drive.  You would have to perform a completely separate and very deliberate Erase Disk operation for that to occur.
    I'm not recommending that you perform a default reset, but it is an option if there is really nothing else to try.
    I don't know if what you are seeing is a Mavericks issue or not, since I refuse to use any new software until at least the first major update with fixes comes along.
    Another user may be able to offer more input on Mavericks.

  • Just got a new Airport Express to replace an old ond that dropped off a lot. Works great with various Apple and Androids but Win 8 computer sees the network but can't connect.

    Just got a new Airport Express to replace an old one that dropped off all the time. The new one works with various Apple and Android devices but will not connect to Wen 8 computer. The computer sees the network but can't connect.

    Hello lucky3480;
    I don't know what else to do. I'm thinking of possibly returning the unit and purchasing a wireless internet card to install in the tower. Any help you can provide would be great. Even suggesting a good wireless card at this point
    Well it looks like you're not having any luck at all with this AX set up but please don't give on it just yet, it's a good choice for extending your Network. Your on the right path, just going backwards and in the wrong direction. You'll learn a lot about stuff this way but may lead to other issues.
    Before I continue, let me know if you have returned the AX or still need help. Here's a link to Apple's PDF about [Designing AirPort Networks|http://manuals.info.apple.com/enUS/Designing_AirPort_Networks10.5-Windows.pdf] Click on it to open in Safari but then save it to your desktop. Now open it from your desktop and start reading Chapter 3, page 42.
    Later...
    Buzz

  • HT4199 Problem Syncing with Itunes wirelessly but can still connect to wi-fi.

    I can access wi-fi from my Iphone 4s and the internet but can't connect to itunes wirelessly to sync the phone.  Was working fine and then just stoppped. Can stilll sync when plugged in but can't use certain apps that require wireless syncing only.

    First connect your iPhone to your computer, click on iPhone than check mark "Sync using Wi-Fi. There your problem is fixed. Make sure your computer and iPhone is connected to the same network.

  • Computer is connected to network but can't connect to internet (Safari and Chrome), e-mail, App Store, ect.

    My Macbook is connected to Wi-fi (four bars) but can't connect to the internet or any other services that requires internet. Other devices in my house have easily connected to the internet but every time I open Chrome it says: "This webpage is not available". What do I do?

    Restart your internet modem and router and your Mac then try Safari etc.
    If that doesn't help, try this DNS server ..
    Open System Preferences > Network > Advanced > DNS
    Click + and type:
    208.67.222.222
    Click + again and do the same.
    208.67.220.220
    Click OK.
    Try a browser.
    if that doesn't help, check the firewall.  System Preferences > Security & Privacy > Firewall > Firewall Options

  • I plug my ipod into my computer itunes pops up with error message "Ipod detected but can't be identified properly" suggests I unplug and try again or uninstall itunes and reinstall nothing works. What should i do?

    I plug my ipod into my computer itunes pops up with error message "Ipod detected but can't be identified properly" suggests I unplug and try again or uninstall itunes and reinstall nothing works. What should i do?

    summarizing:
    iPod nano (what version iOS BEFORE update?)
    downloaded music
    updated iPod to iOS 8.1.2
    Windows 7 PC
    plug-in iPod to PC
    error message from iTunes on the PC "Ipod detected but can't be identified properly" ⬅[quoted from your original post] (+ suggested troubleshooting steps)
    un-plug > re-plug iPod (how many times?)
    iTunes un-installed from PC (?)
    iTunes RE-installed to PC (?)
    error message repeats(?)
    searched "Ipod detected but can't be identified properly" site:support.apple.com with ZERO results - pretty strange that the support site wouldn;t know an iTunes generated error message (?)  EDIT - had an "aha! moment when using a fresh Google search page and 'suggested' CANNOT
    then "Ipod detected but can't be identified properly" site:discussions.apple.com had ONE result = Can't connect to iTunes with ipod touch (-50 error) - NO REPLIES
    CANNOT instead of can't [ tsk tsk ]
    iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
    follow all the instructions in order and let us know

  • ITunes (and Airfoil) can see Airport Express but can't connect in Windows XP (error -15000) - firewall problems?

    I am using Windows XP Professional 2002 w/ SP3 on a Dell Latitude E4300 laptop wirelessly connecting to my Airport Express 802.11n (firmware 7.5.2).
    I can see my Airport Express in iTunes 10.4.1 and can select it via the Airplay button. iTunes even detects whether or not a speaker is connected to the Airport Express. But when iTunes tries to connect, it comes back after a while saying "An error occurred while connecting to the Airplay device xxx. An unknown error occurred (error -15000)."
    A similar problem happens with Airfoil from Rogue Amoeba that I use to stream music from other apps such as VideoLAN to Airport Express on the same laptop. I can see that my Airport Express is available but when Airfoil tries to connect, it comes back saying "It appears that a firewall on this computer is preventing Airfoil from connecting to xxx Airport Express. Please check your firewall settings and try again."
    I've set both Airplay and iTunes as exception programs in my Windows Firewall setting, and even added TCP ports 5000 to 5005 and UDP ports 6000 to 6005 to the exceptions as recommended by Airfoil. I've also disabled Symantec Endpoint Protection that Ihave installed. The only thing I can't disable is McAfee Endpoint Encryption, since I also use the laptop at work and I don't have permission to disableMcAfee.  I use this laptop to connect wirelessly with other devices such as HP wireless printers, NAS drives and other laptops on my home network and have never had any issues, so i think that this issue is specific to the Airplay software being blocked by some firewall (I am assuming Airfoil also uses Airplay).
    I've tried this on different wireless networks and I have the same issue with Windows XP on my Dell Latitude E4300. I've also set up the network with no security, but the problem doesn't go away.
    I also tried downgrading iTunes to 10.3.1 but won't work. I think it's an Airplay issue, not a specific iTunes issue, since I'm facing the problem with Airfoil as well.
    How do I trace what is going on that is preventing iTunes and Airfoil from streaming to the AirportExpress within Windows XP?
    I also have another Dell Inspiron laptop on the same network running on Windows Vista, and have no problems streaming music from iTunes or Airfoil to the Airport Express on the same network, even when the network is WPA-2 Personal (TKIP+AES) protected (I've seen other postings where WPA has been an issue, WEP has not, but in my case, this is not an issue). Ditto with my iPad2.
    Thanks for your help!

    I have the same problem with Windows 7 64bit. ITune can see AE and stream Music well. Airfoil, TuneBlade (airplay soft) can also see AE but can't connect and stream music. I ' ve already tried to setup firewall Exception list, even turning off firewall off both windows and antivirus but still got the same problem with the message 'Airfoil was unable to connect to the remote speaker " ... 's Airport Express". Please check the firewall on the computer where " ...'s Airport Express" is running and try again'. Any help would be appreciated !.

  • Help, just had my iphone 3 but can't connect to wifi put in the correct password but won't accept it, any ideas??

    Help, just had my iphone 3 but can't connect to wifi, i get as far as the password put in the correct password but it won't accept it, any ideas?? Thanks

    What type of encryption are you using with your wireless network -WEP or WPA?
    If your wireless router supports both which it should unless it is quite old and you are using WEP, try switching to WPA which is much more secure than WEP which is important if you have a Windows PC or any Windows based device connected to your network.
    In addition, when was the last time you checked Netgear's website to see if there is a firmware update available for your wireless router model that you haven't installed?

  • Airport reads full signal, but can not connect to internet

    Hi everyone,
    I have a new powerbook that I'm trying to connect to a home network which is set up with a cable modem and a wireless linksys router. The airport reads that it has full signal from the "linksys" wireless network, however I can not get on the internet through the signal. When I connect the computer directly through the the ethernet port, it works fine. I've taken the computer to another location with the same cable modem and wireless linksys router setup, and it worked fine through the wireless. I've actually had this problem quite a few times with various wireless networks (it connects directly, but not through the full signal that reads on the airport), and I was wondering if there are some setting that need to be changed or checked for certain wireless networks. Any help would be great. Thanks,
    Sofi

    I'm sorry I think this makes thing harder, but I have no idea. It's actually a friend's network so I can't check at the moment. I know there is no password to the network and that they have two pcs running fine wirelessly. Is there a way I can check these settings and see what's going on?

Maybe you are looking for