Satelite Pro A200 ATI display driver problem

Hello there,
Have following problem: Can't install ATI software on my notebook. There is an error message during installation: "Catalyst Install Manager can't initialize Detection Manager".
OS - Vista Business
Display adapter - Mobility Radeon HD2600
Any suggestions?

Hi
You could try to use another installation procedure;
- Unzip the ATI graphic card driver package
- access the device manager and choose the graphic card
- choose update the driver and point to the palace where the display driver package was unzipped.
This should help to renew and to reinstall the graphic driver.

Similar Messages

Satellite Pro A60: ATI display driver keeps breaking down

I have had my Sat pro A60 Laptop for about a year now.
I have had a few problems with it since I got it but the main problem has just occured within the last 6-7 months.
The ATI display driver keeps on breaking down and in order for it to work I have to restart the system. This has been an ongoing problem for quite some time and it's now getting rather irriating. It does it at the most inconvenient times like when I am watching a DVD or listening to a CD.
Sometimes when I put the computer on standby, the display doesn't even start up again and the screen remains blank. In order to sort this out I have to switch off the laptop and then restart it. The main problem I have put this down to is overheating as it can get quite hot when I use it.
I sort of know how to sort this problem out, just by clearing dust from the fans. But if there is any other solution to this please help.
Thanks!

Hi
Mostly the overheating happens because of the dirt and dust inside of the cooling modules. The fans cannot work properly and cannot spin with full performance.
I think you should check the fans. I think the easiest way to clean the fans is to use the vacuum cleaner hose against the fan grilles.
About the display issue: In your case I would recommend firstly to update the display driver. Additional if the OS runs since a long time on the notebook so maybe a new OS installation form the Toshiba recovery CD would help.

Monitor Is Flickering - ATI Display Driver Problem Error Message

Hello, for the last few weeks, I have been having a monitor issue. Everytime I turn my computer and monitor on, it is flickering like crazy on my HP 2509B Desktop Monitor, and on the right bottom corner a flag shows up with ATI Display driver, and I am trying to figure out how to repair this monitor issue. I don't know if it is coming from the Monitor itself or its coming from the Mother Board TOWER, I am going crazy with this and its hurting my eyes everytime I turn it.
Sometimes the flickering would just go off by itself, and now its doing it constantly. I don't know what to do with this.
I love my monitor and I hate to see to replace it or something. Please help me with this. I hope it is not a driver hardware issue.
I would greatly appreciate all the help I can get to do this myself if not then I am going to have to take to the store I bought it from and get them to help me out, but I want to do this on my own. If you can help. Thanks

if you have another monitor you can test it to see if if does the same thing and also check the cable and maybe use a different one to see if the cable is not the cause which i doubt
Please provide Kudos to whom has provided answers or
good points or advice..
Aslo if the questions or issues solved please check it
"Accepted"
Thanks and you are welcome _____ Rick

ATI display driver fails to work with new kernel

Hi,
I've just upgraded from
OEL kernel-2.6.18-194.11.3.0.1.el5.x86_64
to most current
OEL kernel-2.6.18-194.11.4.0.1.el5.x86_64
and got the problem with ATI display driver. Whenever I perform kernel upgrade, I have to recompile vendor-provided ATI display driver downloadable from AMD/ATI site, because system ATI driver, provided by OEL/RHEL as kernel module, doesn't work properly (too slow). I did that hundred times and never had a problem. This time the problem is that after upgrading to new kernel and recompiling the existing ATI display driver (Revision 10.8), it doesn't work anymore, even though it worked perfectly with previous kernel. I cannot even start X11 (glibc problem reported with stack traces!!!). The newest ATI display driver (Revision 10.9) "works" with new kernel, but display is awfully slow making any serious work impossible. It is even slower than system-provided ATI driver.
I am pretty sure the problem is in new kernel. As I have no backup of old kernel files and couldn't download the previous OEL kernel files from ULN, neither binary nor source (the files do not exist on ULN anymore, only the recent kernel files), I downloaded the previous kernel source from ftp.redhat.com, compiled the kernel and downgraded to it, recompiled ATI display driver, and everything works properly and fast as before upgrading. I can remember that ULN site used to have all kernel versions prior to actual one and cannot understand why Oracle dropped this practice. As I have an ULN account, I certainly want to have OEL patched kernel.
My question is: does anybody know how and where I can download the previous OEL kernel-2.6.18-194.11.3.0.1.el5.x86_64 binary rpm files or at least source rpm file?
Maybe Sergio or Tommy can help?
Thanks in advance.
NJ

I have experienced the same with Ubuntu some years ago - specific feature (hack?) that was implemented in the kernel was deprecated. This was used by the display driver for an onboard Intel graphics chipset. Beryl (which was subsequently merged with Compiz) turned into a horribly slow experience. As far as I recall, a subsequent kernel patch "fixed" things as a number of users were affected, of which many complained very loudly.
Anyway, I think the lesson here is that OEL is not really the correct distro to use for a desktop. A broken ATI driver for the OEL kernel? Does not really feature in the scheme of things for OEL support. Oracle Grid/RAC/Enterprise/Standard Edition do not care. Oracle's application servers (Apache, Weblogic, etc) do not care. Etc.
Sure, GUI desktop access to an OEL server is needed (like when running dbca or an installer) - but that can easily and effectively be done using vncserver for example and running twm.
You may be able to fix/work-around the problem with the current kernel update.. you may be able to roll back the update. But what about the next time when some other component does not work after a patch or an update? Surely it is a lot less stressful and frustrating to rather use a desktop distro, like Ubuntu, instead?

[W500 and Windows 7] ati display driver stopped responding and has recovered

Hi,
I installed Windows 7 64bit on my W500 (almost 3 weeks old). It installed a driver for the ATI display card from Windows Update. However, since yesterday, I regularly get a driver crash (I assume...).
It's happening when I'm scrolling in a webpage, suddenly the page hangs, the mouse and Windows itself hangs seconds later and after that, after 5 seconds, my screen goes black, the machine beeps and it's back. In the tray, I get an error: ati display driver stopped responding and has recovered.
In the details of the driver, the following can be seen:
Driver Date: 28/04/2009
Driver Version: 8.612.0.0
The card is recognized as a 3650.
Am I doing something wrong here? Can I test with another driver (I tried installing the Windows Vista 64bit, but it doesn't seem to be willing to install...)?
Thanks in advance,
gill

I have the exact same hardware and software (Win7 64) and I'm getting precisely the same symptoms, screen blanks out when I am scrolling a web page vertically using the trackpoint and the center blue trackpoint scroll button.
It's really annoying.
It also never happens when the laptop is in the dock, or when the integrated graphics are engaged, this only happens when the ATI chip is running and only since ATI released the new Windows 7 drivers.
Previously I'd ran this box on on Win7 64 but used the Vista 64 bit graphics drivers from ATI and didn't have the problem, but installation was a pain.

Equium A300D - Toshiba ATI display driver upgrade is not working

Hi
Has anybody else found the Equium A300D PSAK2E Windows Vista 32 bit Toshiba ATI display driver download will not work from the download centre? If you choose run, the download causes the windows explorer to crash during the install and the upgrade fails, the same with save and the install does not self install.
I have been trying to get the TV out S-Video port working. See thread on TV out not working. I have tried everything. has anybody else got this problem as Toshiba are unaware of any problems with the S Video TV out not working on this machine.
Thanks Vince

Hi,
The down load downloads ok but when you try and unzip it, then install it halfay through you get an error message stating windows explorer has stopped working and it has crashed. The Graphic card then will not work. I have tried uninstalling all the ATI software and deleting the left over files but it still wont install.
I have downloaded the programme from the ATI site and this installed ok and the graphic card is working. The s video tv port still will not work.
I have gone into great detail on the post regarding the TV out not working about what i have done. When the s video lead is connected the computer can see the tv but will not output, when you try and enable the display the display will not enable. I have used the FN f5 key with no success, changed settings on the avi controller and display settings in the control panel
I will take the machine back to where i bought it from next week and see if they can get it to work!

ATI Display Driver

I am trying to install the the ATI Display Driver package for a T500 without any of the applications that are included with it. In other words, I only want to install the drivers and nothing else like the Catalyst Control Center, etc.
When I try to do a customized install, I cannot uncheck any of the boxes I don't want installed. It seems like it is all or nothing. what's customizable about that?
Is there a way to do what I want?
Thanks

You could ignore the fact that catalyst control center is installed and just remove CCC from startup (under HKLM\.....\Run in registry) when Windows is starting. Or you could uncompress the package and just install the driver by going into device manager and choose to update driver the driver then select the directory where you uncompressed the package.
-gan

Aperture crashes when doing enhancements crashed at thread 35 which i think is a display driver problem any ideas folks

Aperture keeps crashing every time I try and do some auto enhancements crash log comes up with crashed at thread 35 or 36 which seems to point to a display driver problem imac 2.16 intel core 2 duo 3gb ram os x 10.6.7.
This is making aperture unusable I might go back to lightroom never had these problems with it.
Graham

Hi yes I'm running 3.1.2 I have tried 32 bit mode and it does just the same.
Graham

I'm going nuts with display driver problems!!!!

Hi everyone,
I joined the forum some time ago but I can't get back in so I logged in with a new ID.(Pain)
I have a problem that I hope someone can help with When I place any of my work or a photo into CS5-Ext. I can't do any work on it? No matter what tool other than the paint brush I use, as soon as I click on the picture / work it disappears and will only re-appear if I click on it again. I've tried all sorts and it's driving me nuts, Can anyone help?---PLEASE---
Thanks.

That sounds like a display driver problem.
What OS are you running?
If Windows, you can often visit the web site of the maker of your video card and download/install an updated driver.
If OSX, you need to look to Apple and their OS updates to get updated display drivers.
-Noel

ATI display driver rollback

I have desktop running Enterprise Linux server 2.6.18-164. Recently I installed ATI display driver on it. After that I am not able to restart my machine. Is there any way to roll back the recent driver changes???

You can try to boot in text mode (no graphics) and check /etc/X11 directory. Usually, whenever a change in graphics settings occurs, the system makes a backup of the original configuration file (xorg.conf) and then applies the new settings. So, you can try to replace the current configuration file (xorg.conf) with the old one (xorg.conf.backup), if it exists...
kido

Ati Display Driver Issue

Every time I run Live Update 5, it states that the ATI display driver is NOT installed. Additionally, the video card doesnt show up in control center, cpu-z nor AMD Overdrive.
I have already removed all of the display drivers and reinstalled with no luck. Everything seems to be running fine, but its annoying me and I want it fixed. Stats Below:
CPU Arch : 1 CPU - 4 Cores - 4 Threads
CPU PSN : AMD Athlon II X4 645 Processor
CPU EXT : MMX(+), 3DNow!(+), SSE (1, 2, 3, 4A), x86-64, AMD-V
CPUID : F.5.3 / Extended : 10.5
CPU Cache : L1 : 4 x 64 / 4 x 64 KB - L2 : 4 x 512 KB
Core : Propus (45 nm) / Stepping : BL-C3
Freq : 3549.52 MHz (229 * 15.5)
MB Brand : MSI
MB Model : 870S-G46 (MS-7599)
NB : AMD 870 rev 00
SB : AMD SB850 rev 40
GPU Type : AMD Radeon HD 6670
DirectX Version : 11.0
RAM : 8192 MB DDR3 Dual Channel
RAM Speed : 610.7 MHz (3:8) @ 8-8-8-20
Slot 1 : 4096MB (10700)
Slot 1 Manufacturer : Corsair
Slot 2 : 4096MB (10700)
Slot 2 Manufacturer : Corsair
I have a feeling that it is something simple I am overlooking, but any help woudl be appreciated.

Thought this might help too:
GPU-Z Validation hraac
Card Name:
AMD Radeon HD 6670
Owrer:
Anonymous
Submitted:
2012-03-14 13:20:42
Owner's Comments:
GPU:
Turks
Revision:
Technology:
40 nm
Die Size:
118 mm²
BIOS Version:
013.012.000.031.000000 (113-667ZWF71-113-AD28900-X00-XF)
Device ID:
1002 - 6758
Bus Interface:
PCI-E 1.1 x16 @ x16 1.1
Subvendor:
XFX Pine Group (1682)
ROPs:
8
Shaders:
480 (DX 11.0)
Pixel Fillrate:
2.0 GPixel/s
Texture Fillrate:
6.0 GTexel/s
Memory Type:
GDDR5
Bus Width:
128 bit
Memory Size:
1024 MB
Bandwidth:
64.0 GB/s
Driver:
atiumdag 8.950.0.0 / Win7 64
GPU Clock:
250 MHz
1000 MHz
Default Clock:
800 MHz
1000 MHz
Overclock:
+-69%

Satellite Pro A200-1MI - Need driver for PCI memory controller

I have the Toshiba Satellite Pro A200-1MI(PSAE7E) having a problem with PCI Memory Controller on my notebook.
When I go to Device Manager it shows question mark in the tab Other Devices and when I go there, it's yellow ?(question mark) and !(exlamation mark) at PCI Memory Controller. I took and downloaded all the drivers from your site:
http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU
for XP but I am not sure what type of drivers do I have to install for PCI Memory Controller, is it bios driver or something else? I just need to know what to install to overcome that problem with my Device Manager and PCI Memory Controller.
Thanks in advance!

Hello akibono
I presume you have installed clean WXP on your notebook and now you want to install all drivers, tools and utilities. Am I right about that?
Anyway, after WXP installation you must install all drivers, tools and utilities in specific installations order. After doing this everything should be OK and every hardware component will be properly configured.
Please install all stuff as follow:
WXP
Chipset driver
Display driver
Sound driver
Modem driver
Storage manager
LAN driver
Touchpad driver
WLAN driver
Toshiba Assist
Flash Media driver
Webcam driver
Hardware setup
Controls
And so on
I hope everything will be OK.

ATI display driver lost with Linux and XP dual boot os

I brought ThinkPad W500 with windows vista. I want to get rid of the hidden boot system reserved partition and downgrade to windows xp and install OpenSuse os. Following some sourses found on the web, I first set the bios sata ahci mode to compatable mode. Then install windows xp and update the sata driver. Restart and reset the bios sata back to ahci mode. It works fine with windows xp and I install back all driver. Finally I install OpenSuse and create dual boot with Grub.
But a serious problem come up with me. Everytime after restart from the linux os and back to windows xp, xp doesn't regonize the ATI display divice and tell me no driver installed with low screen resolution. And I have to restart the machine and boot direct into xp for the second time and the problem gone. But it is so annoying of doing this everytime. Anyone can help? Many thanks.
Solved!
Go to Solution.

Hi stanleyimko,
I don't have an answer, just a couple of questions:
Does your W500 have switchable graphics? If so, you may have to turn off "let the OS detect" or permanently select one or the other in BIOS. XP isn't switchable aware, so I don't know why that would make a difference.
Do you see the problem on cold (re) boot to XP, or only on warm reboot from Linux to XP?
Seems like something is leaving your BIOS in an odd state (I guess that's obvious) and maybe a cold reboot would sort it.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Satelite Pro A300-28R - Display shows horizontal stripes

My Toshiba Satellite Pro A300 sometimes displays horizontal stripes which effectively makes the text and images unreadable before laptop crushes and I have to reboot. Usually happens when I am on the internet. Does any one know why this happens and how to solve it?
I once telephoned Toshiba UK Technical Support and a rather impatient adviser said it was a static discharge problem but why does it not happen with my Pavilion laptop?
My Toshiba Satellite Pro A300 is less than a year old yet the above problem has occured on numerous occasions. I have also had to replace the power adaptor already due to the cable being too stiff at the cylindrical piece next to the jack. Does any know of a production issue with this series of laptops?

>My Toshiba Satellite Pro A300 sometimes displays horizontal stripes which effectively makes the text and images unreadable before laptop crushes and I have to reboot. Usually happens when I am on the internet. Does any one know why this happens and how to solve it?
Such display symptoms can be related either to a display, graphic card driver or the graphic card chip.
First of all you should try to update the graphic card driver and should check this again.
Secondly if this issue would appear then you should connect an external monitor to the notebook in order to check if the same would be visible on external screen.
If yes, then the issue might be related to the graphic chip.
This would be the worst case because an graphic chip cannot be replaced but the whole mobo has to be replaced in order to solve such problem.

Is there a good fix for iTunes crashing on start up on the itunes store for Windows 8.1 tried the ones on here bust still get display driver problems

I recently purchased a new PC and it came with Windows 8.1 and tried to install itunes as i had it installed on windows Vista and XP but for some reason now on windows 8.1 every time I open itunes is takes me to the take a tour page of the new itunes and when i try to go to the itunes store it allows me to brows for like 30 seconds before i get the Error Display Driver.

What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
For Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
Do you have dual graphics adapters?
Go to the Windows Control Panel and select Hardware and Sound and then select Device Manager... In Device manager you click the + sign to the left of Display Adapters... and see if 2 are listed
IF YES, read below
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2

Satelite Pro A200 ATI display driver problem

Similar Messages

Maybe you are looking for