Satelite Pro A60 - Will not start up

My A60 will not start. The power supply is plugged in with a green light on the power block and the A60. The battery has fully charged (light started orange and is now green). Nothing happens when the power button is pressed!
Tried taking the battery out and running on AC but no change.
Any ideas?
Thanks
L

HI Lawrence,
Try removing the battery and also diconnecting the AC supply for a few minutes. Then re-install the battery and try to power on the unit. If this doesn't work then remove the battery and connect the AC supply. Again try to poer on the unit.
If none of the above works then you will need to refer to an Authorised Service Partner to have the notebook checked.
regards,

Similar Messages

Mac book pro Computer will not start black screen

Help, my Mac book pro will not start, blank screen.

Read this: http://www.ifixit.com/Wiki/MacBook_Pro_13%22_Unibody_Troubleshooting
Sometimes this helps too: http://support.apple.com/kb/HT1379
Also this discussion provides a lot of troubleshooting; https://discussions.apple.com/docs/DOC-3353
Bye

Mac book pro (2008)will not start up,command-v gives (error) Import:Importer start failed for 89(kr:268435459)invalid destination port)

will not start up.
tried Command-v
message reads
(error) Import:Importer start failed for 89 (kr:268435459)invalid destination port)

First, uninstall "SuperTV" (whatever that is) according to the developer's instructions. It isn't working and it's filling the log with noise.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged before the boot, while the system was unresponsive or was failing to shut down. Please include the BOOT_TIME message at the end of the log extract.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
PLEASE DO NOT INDISCRIMINATELY DUMP THOUSANDS OF LINES FROM THE LOG INTO A MESSAGE. If you do that, I will not respond.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

New Satellite Pro L300 will not start up or operate

My new laptop will not start operating. I have done everything by the book in regard to installation, but once it asks for my user name and password, it goes to a page where it says "Preparing your system". Then after about 10 mins it goes back to the sign in page with my user name and password, and repeats the whole thing.
How do I fix this? The laptop was bought new from ebay as a gift.

Getting a DOA is so random that it probably won't matter when you place your order. Right out of the box,the machine should start up instantly when you press the power button. Yours doesn't.
It sounds like it arrived with a dead battery and the power adaptor is not charging the battery. Even so, it should start up from the power adaptor alone. It could be that the power adaptor is not being recognized.
If you still have it, you could try resetting the SMC, which could possibly get things working again:
http://support.apple.com/kb/HT1411?viewlocale=en_US
Your satisfaction is important to Apple. If your machine has problems out of the box, they would rather give you a replacement immediately than to mess around with one which obviously has a problem of some sort. The one you return will go to the repair depot and the problem will be found and repaired if possible. Then it goes to the online store and is sold as a refurbished machine.
A power issue like yours may be simple to fix, or it may not be. The last thing you want to do with an expensive brand new machine is to find out it is defective in some way and have to send it off for repair. You would much rather just give back the defective machine and get another one that is not defective, and I think Apple realizes this.
There's really no reason to wait before submitting a new order--you can do it at your convenience.
Good luck!

Acrobat Pro 10 will not start after installing PitStop 10

This is my problem. Acrobat will not start when I have installed PitStop 9 or 10.
However, it works fine together with PitStop 8.
Thanks.

Don't know about fixing PitStop. However, have you tried a simple repair on Acrobat. If Acrobat won't open you can do that from the Programs and Features menu (Add/Remove Programs in OS prior to Win7).

Mac Pro 13" Will NOT start in Safe Mode - Tried everything!

hello I'm trying to get my Mac started overnight it's decided that it doesn't want to work.
ive tried various startup commands to see if I can fix the issue but safe mode will not work what so ever
When I login this appears and at 40/50% it just turns off.
anyone know?
g

Try resetting NVRAM if you haven't already. How to Reset NVRAM on your Mac - Apple Support
Install any new hardware recently?

What is the problem with the latest update of Firefox - 30. I have tried the update 4 times (Win 7 Pro ) Program will not start under conditions?

That's it.
After update the program will not run. No matter which method I choose. I.E. Run as administrator. Double click.
I tried starting multiple windows but when each one get to a few 2000 mbs showing in Taskmaster they re-treat and close down??
Uninstall and re-install the old version and everything is hunky dory?
Well apart from informing me that there is an update available.
Many thanks :)

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Create a new profile as a test to check if your current profile is causing the problem.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over problems.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Logic Pro 9 will not start in Mountain Lion

I have gotten so much great info here, that I thought this would be the best place to ask my question. I am using a Mac Pro 3, 1 (early 2008). I bought the machine running Leopard, upgraded to Snow Leopard, lion, and Mountain lion with no problems. I have a valid license for logic studio eight and nine. Logic ran without problems… Until I upgraded to Mavericks. After upgrading, my computer started acting terribly. It was much slower, and I would get these terrible freezes where the screen would go kind of crazy flashing colors and stop working completely.
After thinking it was my graphics card, and not wanting to spend $1 million on a new video card, I decided to try downgrading back to Mountain lion.
First, I cleaned off the system drive, and installed mountain lion fresh from a USB drive. The crashing went away and the computer ran much faster and smoother.
However, after reinstalling logic, I am no longer able to start it. As soon as I click on the icon either through Finder or a dock menu, it crashes almost immediately. It has never gotten to or through the part where it scans the plug-ins or anything. I tried to understand the report it generates, and understand the things that it is trying to tell me, but cannot make any sense out of what it is actually saying happened. I have updated the app as well. I am currently at 9.1.8.
I don't know why this is happening, and don't know what the best next step should be. I already have everything moved out of the way if I need to do another fresh install. I was thinking to try a fresh install on a clean drive of Mavericks, and see if anything changes. Also, when I would try to change logic to start in 64-bit mode, there would be no option in the "get info" window to select or deselect 32-bit mode. It simply wasn't there.
I can post specs/logs/error reports of course, but don't even know where to start. Does anybody have any experience with this? Does anybody have a suggestion for where to start? Do I need to get Logic X? (Logic was running fine in Mountain Lion before) I have scoured the Internet trying to find someone with similar issues, but haven't found anything that works. All I have really tried is reinstalling both the OS and the app. Everything else works great in Mountain lion. I still have my Snow Leopard disks if you think going all the way back there would be the best option. My OS is running in 64-bit mode, but when logic does try to start, it says 32-bit mode in the little start up window.
I'm totally comfortable with Terminal, Console, etc, so can provide any info if anybody thinks they may be able to direct me towards a solution.
Thanks for reading and thanks for any help or advice.

kcstudio
Must be my chipset then, although another Mainstage board told me otherwise. (that it was the OS)
When I upgraded my Duo2Core MBPro to Mavericks, I too lost Logic 9.
I'm pretty much done with Logic 9, and pretty happy about the new Logic X, and happy that it works on ALL of my machines.

Hi All, Mac Pro 2008 will not start after shutdown straight from sleep! Help!

WILL A NEW LOGIC BOARD SOLVE MY PROBLEM?
My early 2008 Mac Pro (2.8, 8-core 22 gigs ram) was shutting down from sleep both when I activated it, and then later by itself. Recently it refused to turn on, shuts down after about 3 seconds, light goes off, fans stop.
Took it in and they replaced the GPU card and PSU. Things were great ... for two weeks. Then suddenly the same symptoms, but at an accelerated rate of occurance. After a day, it did not power on at all save the three seconds of startup fans.
Took it in again. They AGAIN replace the known-faulty ATI Radeon HD2600 XT cards (two), the ones Apple have agreed to replace up to July 2011.
Well got the machine back and she worked like a charm... for two weeks. Same thing now. By the way all checks of hardware, ram, disk drives - extensively have come up OK.
Does anyone have any advice, or have the same problem?
If it is the logic board, is it worth it to replace or when things go south like this is it better to cut your losses as more and more will likely go wrong?
Would appreciate any feedback.
Many thanks

We can't help with your question. How would we know what has gone wrong with your hardware? We don't have access to your machine.
I would take it back, or send it in, to Apple Repair.
I hope you have AppleCare!

Macbook Pro 2010 will not start up properly

My Macbook Pro suddenly stopped responding to my actions, which it had never done before (ex. my music on itunes would stop playing without me presseing anything). I shut it down forcefully. At first it did not turn on and was making these weird noises near the power button on the right side. Then I tried restarting it again, and after about 15 minutes was able to get to my desktop. However, I couldn't open any of the files. Now everytime I restart it, it keeps going in and out from a blank desktop screen to a blue screen. If i keep it like that for a while it does the same thing with my password box and the black screen. I tried resetting the SCM and PRAM. Nothing happened when I reset the SMC, but when I reset the PRAM it brought me to a different login, which recognized my keyboard and was responding right away. However, after inputting my password it just went to the regular black password screen and continued going back and forth between that and a black screen. Also my keyboard lights go on and off. HELP!!!!!!! I have two exams and 4 papers next week and I cannot afford to lose everythin.

Kinger2010,
you can try this: boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Does it reach the login screen now?

Adobe acrobat pro app will not start when I click

Just used installer to download Acrobat Pro. When I click on icon or click in applications file nothing happens

did you install acrobat pro?
if yes, check your install logs to see if there was a problem with your installation, Troubleshoot with install logs | CS5, CS5.5, CS6, CC
if no, install it.

MacBook pro will not start up.. 3 beeps pauses 5 seconds then 3 beeps againtried holding D key down but no results

MAcBook pro notebook will not start up. Blank screen, 3 beeps then a pause 3 beeps again. Held down D key and no results.

http://support.apple.com/kb/ht1547 Power On Self-Test Beep Definition

MBP will not start, only has 99Mb free

Hello, I am trying to fix a friends Macbook Pro, which will not start. The logo appears with the spinning cog, but nothing else - it can stay on this screen for hours. I tried to reinstall Tiger, and then discovered that it only has 99Mb free, and Tiger needs more space.
I can access Terminal, but I am not familiar with UNIX to be able to do anything there. Is there a way of accessing the hard disk via my own iMac or wife's MBP through Firewire so we can delete something. I guess Target mode will not work, as there is not enough space to start the OS. Any help appreciated.
Our friends MBP is one of the original, 1.8Ghz Core Duo with 512Mb RAM.

The computer will probably still boot up in TD mode, Simon, even though it can't boot the Mac.
When used as the boot disk the computer needs plenty of free space to set up virtual memory areas and the like. That is one of the reasons why you should always make sure that there are always quite a few Gigabytes free for safe operation (Never let it get below 10% free space and try to maintain around 20% or more if, for example, you ever burn video, or other very large files).
TD mode essentially turns the computer into just another external HD, and the process occurs before it really needs to make use of the internal drive in the boot cycle.
So give it a go (just hold down "t" while starting the MBP). Your iMac should then see it as a second, external, HD.
Don't try and install any OS until you have cleared LOTS of space - 50 Gig or more in a situation like this where many of the files themselves will have become badly fragmented (because the normal OSX processes for defragging can't operate when a drive gets this full) . In fact I'd STRONGLY suggest that you back up or clone the entire drive to an external, or to another computer, wipe the internal, and only then start putting things back on. Otherwise you will have horrendous levels of free space fragmentation.
Cheers
Rod

I have a version Adobe pro 7, my old computer hard drive failed tried to install on my Windows 8.1, will not start up error message

I have a version Adobe pro 7.1, my old computer hard drive failed, tried to install on my Windows 8.1, will not start up get error message? any solutions? It worked perfectly fine on my old computer which was windows 7.0

Hey,
I am sorry but Acrobat 7 is not at all compatible with Windows 8. For this, you will need to upgrade your Adobe Acrobat version.
For better understanding, please refer this kb file:
Compatible web browsers and PDFMaker applications
Regards,
Anubha

TS4088 I have a MacBook pro that has power issues and will not start but the hardrive is fine. I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase o

I have a MacBook pro that has power issues and will not start but the hardrive is fine. I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase a new one? Also, the software is not updated as the computer hasn't worked for about 2 months.
Also, if it is possible to transfer the hardrive, would my iTunes music transfer as well? It is not saved in the cloud.
Thanks for your help, it is much appreciated.

You computer is probably perfectly repairable, but if you want a new one anyway, it is perfectly possible to transfer the data from the faulty one.
But it would be a mistake to simply put the old HD in the new computer.
These are the steps:
Remove Hard drive from faulty computer. (very easy on Unibody MBPs, do-able but not so easy on older MBPs)
Put it in a cheap enclosure
Connect it the new computer
Boot up new computer.
If the new computer has never been run before the Setup Assistant will ask if you want to import your apps, data, settings etc from either another mac, another HD connected to the Mac or a Time Machine back up.
Obviously chose the second option (another HD connected to this Mac) and follow prompts.
If the new computer has already been run (so Setup Assistant doesn't run when you boot it up), you will need to use Migration Assistant...or run the installer again so that Setup Assistant runs again.
Message was edited by: Mike Boreham...added sec on line

Satelite Pro A60 - Will not start up

Similar Messages

Maybe you are looking for