Satelite Pro S300 - USB stopped working

Hello
I have a 6 months old laptop Sat Pro S300-100 and are running Vista 32-bits. It's got 4 USB slots, 1 combined who is working on left side, and 3 USB2 slots on right side and these 3 suddenly stopped working. I've tried different connections, USB mouse, external disk, memory stick, but they are all dead.
I've tried to deactivited and activited them, no change. I've checked the ports and the system response are that they are working.
I've had a similar problem earlier on a Tecra 9000 some years ago and the replaced the main board.
Does anyone have a solution, please?

Hi!
Do you have yellow marks in the device manager?
I think there is a hardware problem. Contact an ASP (authorized service provider) to repair your notebook.
Here you can search for:
http://eu.computers.toshiba-europe.com => Support & Downloads => Find an ASP
Bye

Similar Messages

"Adobe Premiere Pro CS6 has stopped working" but was working fine a week ago...

On my desktop (Dell XPS 8300), I keep getting the error message "Adobe Premiere Pro CS6 has stopped working" when openng up a previously created project or trying to create a new one in Premiere Pro CS6.
On my laptop (MS Surface Pro 2), I can load projects and edit them, but I cannot export media. When I try, it just sits there and does nothing. I've also tried sending it to Media Encoder, but that doesn't help either. Sometimes, it crashes too.
I'm running Windows 8.1 on both with the latest updates installed.
Oddly, this started roughly around the same time on both computers.
I've tried uninstalling and re-installing, but that didn't help.
I've run the Windows troubleshooter and that didn't help either.
I've tried running as an administrator, and running the program in compatibility mode for Windows 8, 7 and Vista - that doesn't solve the issue either.
At this point, I can't do any work and am even considering paying for CC even though I just dropped $700 on CS6 last year, but I'm wondering if that would even solve the issue, or if the CC version would also not work...

>started roughly around the same time on both computers
Most likely cause is a Windows update that changed "something" about the video system
Check the vendor site (NOT Windows update) for a newer video driver
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

Adobe Premiere Pro CS6 has stopped working when importing music (Windows 8)

I have a problem with Adobe premiere Pro CS6 on windows 8. When I use Premiere Pro CS6 for the first time, it's doesn't have any problem, but now I can't import music to Premiere Pro CS6 and it's say ''Adobe Premiere Pro CS6 has stopped working'', I don't know what should I do. How to fix it ?

>started roughly around the same time on both computers
Most likely cause is a Windows update that changed "something" about the video system
Check the vendor site (NOT Windows update) for a newer video driver
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

Adobe Premiere Pro CS6 has stopped working

I have brand new Samsung 5 series laptop
Windows 8
Intel core i7
Radeon Graphics AMD
AMD HD8750M gDD3 2Go_Dual
8 Go (DDR3 1600MHz/4Go*2)
1T
I open Adobe Premiere Pro CS6. I import a .mov file. I move the .mov file into the next box and a message pops up saying "Adobe Premiere Pro CS6 has stopped working"
Then Adobe Premiere Pro CS6 closes.
Help Please

This was patch week for Microsoft... if you let Windows update, you MAY need to check your graphics adapter driver
•What is your exact brand/model graphics adapter (ATI or nVidia or ???)
•What is your exact graphics adapter driver version?
•Have you gone to the vendor web site to check for a newer driver?
•For Windows, do NOT rely on Windows Update to have current driver information
•-you need to go direct to the vendor web site and check updates for yourself
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

My MacBook Pro speakers are stopped working and on screen volume icon shows in gray colour I am unable to change the volume.

My MacBook Pro speakers are stopped working and on screen volume icon shows in gray colour I am unable to change the volume.

Go step by step and test.
1. System Preference > Sound > Output > Internal Speakers
    Highlight Internal Speakers.
    Make sure that Mute is not enabled.
2.Plug in and remove the headphone.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
    Try this even if you don’t see the red light.
3. Reset PRAM. http://support.apple.com/kb/PH14222
    Do this twice
4. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the appropriate method.
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
5. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
    Side Bar
    Click the Built-in Output.
    Under Mute any of the boxes checked? If so,uncheck it.
6. System Preferences > Sound> Sound Effects
    Play sound effects through:
   Select "Internal speakers" and then back to "Selected sound output device".

Macbook Pro optical drive stopped working after upgrading from Mac OS X 10.6 Snow Leopard to OS X Mavericks.

My Macbook Pro optical drive stopped working after upgrading from Mac OS X 10.6 Snow Leopard to OS X Mavericks.. I wonder what's the work around or troubleshooting to fix this. Thanks!

try and Reset the System Management Controller (SMC)

All USB stops working after restarting iMac, please help!

I am having a serious problem with my iMac and i'm at a loss of what to do. I have a 24" imac with 10.5.6 and about a week or two ago I restarted my computer only to find that none of my USB ports were working. I thought it was a fluke so i just restarted again, only to find out that they still wernt working. I was forced to do a restore because I couldn't find a fix so I booted up from my leopard disc and did a restore from my time machine backup. I thought all was well and good until i restarted again yesterday. The same exact thing happened so I did another restore. Well, I just needed to restart my computer again and what do you know, my USB stopped working again! I have repaired permissions, done the apple hardware test, reset the PRAM, and verified the disc to see if there was anything wrong with it. I am at a total loss on what to do and Im really not looking forward to doing another restore only to have it do the exact same thing. Please help!

If you haven't tried this, try resetting the SMC: http://support.apple.com/kb/HT1543?viewlocale=en_US
When you booted from the restore disk, did you run Disk Utility to check the hard disk for errors?
If not... make sure and disconnect anything connected to the USB ports first,
To check the hard disk:
Open Disk Utility, in the Utilities folder in the Applications folder.
Insert your Mac OS X Install disc in your computer’s optical drive or an optical drive connected to your computer, and then restart your computer. When you hear the startup tone, hold down the C key until you see the progress indicator, which looks like a spinning gear.
Follow the onscreen instructions until the Menu Bar appears with the Utilities menu in it, choose Utilities > Disk Utility, click First Aid, and then click the Verify button. If DU reports errors, click Repair. When it's finished, from the Menu Bar, select Utilities/Startup Disk. In the Startup Disk window select MacintoshHD 10.x.x and click Restart.
Also, click the Apple logo top left in your Desktop, click: About This Mac, then click: More Info
That will launch your System Profiler. Under Contents on the left, click: USB and make sure your USB information is there.
Carolyn

Macbook pro optical drive stopped working after installation of mavericks

macbook pro optical drive stopped working, just spins and won't eject, ever since I upgraded to Mavericks, thoughts?

I have the same problem and was advised by someone to reset System Management Controller (SMC). I haven't tried it yet though. I wish it could fix it. Let's give it a shot!

Premiere pro 5.5 stops working when playing a sequence, saving a project or closing,any ideas why?

I can open a project, import files or other projects, but when I want to play the sequence the program stops working and closes. When I try to save the project or close the program I get a "software not responding" message.
I hope someone can help me with this as I cannot work on any projects.
thanks.

Hi john,
thanks for taking the time to help me. I have updated the software and rendered the files and now I am able to play them, but still neither the sequence nor the clip play/show on the corresponding screens, I can only hear the audio file. I also continue having problems when saving the project, the software stops working and I get the "non responding" error from microsoft.
As you suggested, and I have to say I am pretty much a dummy with the codecs and alike, I installed the mediainfo and run one of the files.
This is the info that appears on the screen
I am not getting any error messages from Premiere, so I am kind of stock. If you need other info let me know.
Thanks for your help and patience.
Arantza
Date: Mon, 23 Apr 2012 09:12:15 -0600
From: [email protected]
To: [email protected]
Subject: premiere pro 5.5 stops working when playing a sequence, saving a project or closing,any ideas why?
    Re: premiere pro 5.5 stops working when playing a sequence, saving a project or closing,any ideas why?
    created by John T Smith in Premiere Pro CS5, CS5.5, & CS6 - View the full discussion
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037What is a CODEC... a Primer http://forums.adobe.com/thread/546811What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037.Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing.For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/enFor Mac http://mediainspector.massanti.com/.http://blogs.adobe.com/premiereprotraining/2011/02/red -yellow-and-gree n-render-bars.html.If you have a red line over the timeline after importing a video and before adding any effects... your project is wrong for your video... read above about codecs.Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project.H.264 will NOT work inside an AVI http://forums.adobe.com/thread/854115.More information needed for someone to help... click these links and provided the requested information-http://forums.adobe.com/message/4200840-http://forums.adobe.com/thread/416679.For CS5 and later, the easy way to insure that your video and your project matchSee 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4354727#4354727
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4354727#4354727. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Pro CS5, CS5.5, & CS6 by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Hi, i have a problem that my macBook pro keys suddenly stopped working. The power button,volume keys, brightness keys and shortcuts do not work. Does anyone know why or how i can fix this problem?

hi, i have a problem that my macBook pro keys suddenly stopped working. The power button,volume keys, brightness keys and shortcuts do not work. Does anyone know why or how i can fix this problem?

hi, i have a problem that my macBook pro keys suddenly stopped working. The power button,volume keys, brightness keys and shortcuts do not work. Does anyone know why or how i can fix this problem?

After software update, airport an USB stops working. Clean install fixes it until I update

I've reset PRAM and SMC erased and reinstalled 10.6 multiple times. Everything is fine until I do a software update. I can boot into windows via boot camp and all is well, but in OS X some USB ports stop working, and airport will say no hardware installed. I've repaired permissions as well with no luck. No AppleCare left so I can not call Apple.

I have this problem too. I have the 27-inch LED cinema display connected to my Mac Pro 1,1 via the Radeon 5770. I also suspected it had something to do with the machine going to sleep, but the audio doesn't disappear every time it goes to sleep. Unplugging the monitor fixes the problem.
I also noticed that when the sound has went away, if I try to change the volume there will be a long delay before seeing the volume-change graphic. Also, toggling the sound device in System Preferences while the problem is in effect is unresponsive, sometimes giving the beach ball. Finally, this message is seen in console logs when the sound has went away:
10/19/10 6:01:22 PM kernel USBF: 75053.200 AppleUSBEHCI[0xf3d0800]::Found a transaction which hasn't moved in 5 seconds on bus 0xfd, timing out! (Addr: 5, EP: 0)
I can make this message appear on demand by attempting to change the volume.
If (when) this happens again, I'm calling support.

USB stops working

All of a sudden I have the USD on my Mac Pro stop working and then I have to restart. Is there a PRAM battery that might be doing this? My Sound Stick and XKeys are not recognized. Any suggestions?
Thanks

Try things in this USB faq.
Here's Apples version.
DALE

Maxbook air keyboard, trackpad and usb stop working

Hi everyone! i have a macbook air (early 2008) and it stop working the keyboard, the trackpad, and the usb port i think the bluetooth too becouse when i checked the hardware it doesn't appear i think is something wrong with the software becouse the ilumination of the keyboard still works but i can't use the restore disks becouse i don't have keyboard so i can't choose the start disk, any ideas what can it be? someone experience the same problem? Thanks

It's a common problem. I'm not aware of a fix yet.

My MacBook Pro mid 2012 stopped working completely.

It was fully charged, and I was on battery, and all of a sudden it stopped working. The display went black, and powering on doesn't work. LEDs don't light up after pressing the charge indicator button even though I am sure it is (almost) fully charged.
I tried connecting the power adaptor and the green LED doesn't glow. There seems to be some problem with my MacBook since my charger is working fine with other MacBooks of my friends.
Connecting another working adapter, and powering on didn't work either. It has been 7 months since I brought my MacBook, and I am running Mavericks. I have contacted the support, but they say I have to take it to the store.
Unfortunately, there are no Apple stores nearby my current location, and nearby ones are like 5 hours away from here.
So, I wanted to ask - Am I missing something? Is there something I can try now?

Hello Bharadwaj6,
Try resetting SMC by following the below Method.
Resetting the SMC on portables with a battery you should not remove on your own
Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
http://support.apple.com/kb/ht3964

Yoga 2 Pro Webcam suddenly stopped working....(not a hardware problem!)

Hi everyone,
I've had the yoga 2 pro for about a year now - took a little bit of fiddling to get it working just right (clean OEM win 8.1 install and installing drivers in the right order etc) but I had it working just perfect then....
About a week ago the webcam stopped working during a skype call. I tried reinstalling the drivers etc and messed around for 2 days trying to get it working again. The LED light comes on when it's engaged and it says it's present and working in device manager but I get no picture on skype or any other program.
I reinstalled windows 8.1 from scratch in the hope that this would solve it but same issue.
So I assumed it was a hardware fault and thought stuff it!
But then last night I installed Windows 7 32 bit on VMWare to run some of the older 32 bit programs and the webcam works perfectly within this virtual OS!! So it doesn't seem to be a hardware problem after all.
I've tried everything - installing the bison & Liteon drivers from the Lenovo website, installing the generic win 8 drivers etc but NOTHING WORKS!!
Can you help? I just want to get this thing working again!!
THANKS!

Unfortunately I've reinstalled the driver after uninstalling it from the device manager 10 times. I also formatted and reinstalled, but that didn't fix anything.
The camera works for the camera app + the webcam test online. I've tried rollback on the drivers, and installing earlier versions of skype with no luck.
Very strange, all it does is show the loading sign, and never loads.
This is the desktop version of skype btw. I'm going to try it with the non-dekstop version tonight and see if it works.
EDIT: Is there any other camera source besides 'Lenovo EasyCamera'? Their are two drivers on the drivers page, which one is recommended?

Satelite Pro S300 - USB stopped working

Similar Messages

Maybe you are looking for