Satelitte C55 B5298 Network lan driver problem

I got a problem, i got SATELLITE C55-B5298 with windows 8.1 is new. but the problem is a lost the ethernet adapter, I looked for this driver in sopport page but it doesn´t work.
what can i do, I need to use Lan no Wifi.

Satellite C55-B5298
Downloads here.
RealTek LAN Driver
"Doesn't work" doesn't tell us anything. There's a message when you install it?
What shows in Device Manager (devmgmt.msc)? Attach a picture like this.
-Jerry

Similar Messages

Data Modeler EA1: Running off LAN drive Problems.

Installed Data Modeller with the JRE included on LAN drive succussfully.
Attempted to run the Data Modeller from LAN drive, but there were many problems.
1. Preferences window had java errors
2. limited functionality.
Solved by installing on local drive.
Need to update install instructions and documents to reflect installation requirement of using local drive.

Thanks Philip.
I don't think that is the answer. My workstation is locked down very tightly, which is why I first attempted to install the software on my LAN drive. I think that for some reason java network detection is turned off, so that java has problem finding components with the local sub-directory on the LAN drive.
I am not certain if this helps you.
Thanks again.

Ms 6368 lan driver problem

i cant setup lan driver for ms 6368 because driver files not setup file. where i must put the driver files.

Quote from: 6368problem on 08-February-10, 01:48:17
i dont know in english but this picture maby can help you.
Right click on the device with yellow mark, then select update, choose manual update, then point to the:
.....\10_100\PCI\WINXP\Netrtlx.inf

Satellite C55-A5105 Wi-Fi is painfully slow, wireless LAN driver won't install

I've been bouncing around for solution on this issue of C55-A's and 8.1 having problems with slow Wi-Fi, and attempted to do the driver update. However, after downloading an extracting to it's own folder on my Desktop, I get to a point where it reads it cannot locate file C:\Users\<my username>\Desktop\<folder name>\Win8164\REALTEK Wirless LAN Driver.msi. If I retry, I get a 1706 error, no valid source could be found for product REALTEK Wireless LAN driver. I'm pretty certain I'm download the correct driver. I have run a check from Device Manager to see if the latest driver is installed, and I'm being told yes, so I can't figure out why speed is so slow still. This is my wife's laptop and it's barely used since we got in May, so we are a bit behind on Windows updates. Not sure that has anything to do with it. I've also disabled the Wireless card from being able to be powered down, another tip I found in this forum.

Hi Peter. I stumbled on this site and downloaded the driver they link to, followed their instructions, and see no improvement. I'm trying to break up the Windows Update downloads, and 84MB is a snail's pace. Do you have any info on what driver i should be updating exactly, and where that file may be?

External Drive Problem on Home Network?

Hi,
Any chance someone might be able to help me sort out a problem with my home network or point me in the right direction for more info?
I've managed to set up my home network through a wireless router (3Com). I've got a PPC iMac, MBP and HP printer connected wirelessly on this network. I use the Finder/Go/Connect to server and smb://192.168.1.2 to connect. (I've no idea what smb means or how it works!) An icon also appears in the finder side bar under shared and I can connect this way aswell.
I bought a 320Gb/7200rpm Iomega Home Network Hard Drive - Ethernet (and Usb). I partitioned and reformatted it (Mac OS Extended-Journaled) to move my iPhoto, iTunes and Data files so these could be accessed from either computer (haven't moved the files yet!). This drive is wired through one of the ethernet ports on the router.
Although I can see and access this drive on the wireless network I can't see the partitions or add files and I can't see files I added as a test when wired/connected to the iMac through the Usb ports.
I had tested the drive before reformatting/partitioning it and could see and access it (copy/move files, etc,) on the wireless network.
Any ideas on what to do to be able to access and use the drive wirelessly or from both computers, wired to one on usb?
Thanks for any help,
David

Hello,
Purchased the 500G version of the Iomega NAS drive, having similar issues. Accessed the unit via its IP address, from Safari, and set-up some folders to be shared, and other parameters. But I can't seem to access the drive (mounting with SMB://xxx.xxx.xxx.xxx) seems to offer me grayed-out choices for those folders).
My guess is that we're required to use the SMB networking, since its built-into the unit. Was surprised to see in your post that it was easily formatted with a Mac OS (I presume you did this while connected via USB?)
Becoming inclined to try the PC management SW that came with unit (using a "bootcamp" PC) as opposed to trying to do any more "Mac-based" configuration. Note that if you need to re-format back to the original PC format you can do that via the IP address, from Safari.
I guess I'm not really being very helpful, but maybe you've figured out some of this since November.
Appreciate any "Lessons Learned".
Cheers,
Dave H.
P.S. I did find some info at the Iomega web site (see below). Maybe this will help?
https://iomega-na-en.custhelp.com/cgi-bin/iomegana_en.cfg/php/enduser/cust_alp.php?prod_lvl1=1031&prod_lvl2=1026&p_prods=1031,10 26&cat_lvl1=73&p_cats=73&p_pv=2.1026&p_cv=1.73&psid=B-ELBMmj

MDT2010 deploy and Thinkcentre network driver problem.

I can`t get a Lenovo ThinkCentre to run a sysprep or deploy a image. It can`t find the network card driver.
Someone here now where to download this driver ? It is a realtek driver and I already download from Lenovo site and Realtek but no go ?
pci\ven_10ec&dev_8168&subsys_307C17AA&Rev_06
Br Daniel

Hello again.
Sorry I have probably not explanined this well enough. What I am working on is to run a sysprep/capure or deployment to the Lenovo ThinkCentre not runing MDT 2010 on it. This is the error i get.
Wizard Error
A connection to the deployment share
(\\server\DeploymentShare$)could not be made.
The following networking device did not nave a driver installed.
PCI\VEN_10EC&DEV_8168&SUBSYS_307C17AA&REV_06
I have fund out that the deployment is working fine if it is Windows 7 32bit. Sysprep/Capture and deployment of Windows 7 64bit from MDT 2010 is no go.
The pc is a new Lenovo ThinkCentre M1578-D7G running Windows 7 64bit. I have also captured the driver from the machine but still no go.
Al this problem was the same I had on the Lenovo Thinkpad T410, There I had to use some default Dell network card driver.
btw. I having no problem to Sysprep/Capture or Deploy to my servers (IBM/Dell) og other laptops and desktops (HP/Dell/IBM)
Please help Lenovo.
Br Daniel

Unable to install lan realtek rtl8101 and network controller driver on windows server 2008

Hi Guys,
i am trying to install realtek rtl 8101 f amily driver and network controller driver on windows server 2008 but unable to install.
Hp device Model.:- hp pavilion g4 1303au
Model no.:- 5c03213jsh
network controller Device ID: PCI\VEN_168C&DEV_0032&SUBSYS_1785103C&REV_01\4&211965BF&0&0020
Name: PCI Device
Device ID: PCI\VEN_10EC&DEV_5209&SUBSYS_3564103C&REV_01\4&34BC5A71&0&0030
Name: SM Bus Controller
Device ID: PCI\VEN_1022&DEV_780B&SUBSYS_3564103C&REV_13\3&2411E6FE&0&A0
thanks,
Amit Rai

Hi:
SMBus controller:
Here is what I have done...I have zipped up and attached below under Attachments, the raw smbus controller driver files for you to unzip and manually install.
Download and unzip the file.
Go to the device manager and click on the smbus controller needing drivers. Click on the driver tab. Click on Update Driver.
Select the Browse my computer for driver software option and browse to the driver folder that you unzipped.
Make sure the Include Subfolders box is checked and the driver should install. Then reboot.
Ethernet: Download and install the 1st driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=7&Level=5&Conn=4&DownTy...
Card reader (PCI dev.): Download and install the first driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=15&PFid=25&Level=4&Conn=3&DownT...
Wireless: You will have to try the Vista driver for the Atheros wireless card...
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&sp...
Attachments:
sp66185.zip ‏7 KB

Lenovo Yoga 13 Downgrade to Windows 7 Wireless Lan Driver & USB3.0 Driver

Hey guys,
I have purchased the Yoga 13 in U.A.E in last Feb. with AED4,999.00
But some programms does not work with Windows 8. So I am using Windows7 with multi-boot.
Guess you guys also have such problem.. eventually finding out the WIFI Driver & USB3.0 Driver.
Now, I have succeeded in installing both of them.
1. Wireless Lan Driver : Realtek RTL8723A Wireless LAN 802.11n USB 2.0 Network Adapter.
   The way I found this driver is... Download all the REALTEK driver in a designated folder.. of course uncompressed.
   And then using the contraol panel... updated the driver with the designated folder.
   Now it is working very well.
2. USB3.0 Driver
It was an easy game. I just have downloaded thee Intel USB3.0 Driver for Windows7... you could find it through google with easy.
And just installed it. It works very well.
=> You could download the file at http://me2.do/xKBVnWo3
      (just put password : 4321 )
If you guys have problem with above issues... or need the file let me know with my mail at xxxxxxxxxxx
Anyhow, there are still two drivers I couldn't find.
Jerry Bong
Moderator note; e-mail address removed to stop the spambots getting it

hi jerrybong,
Thank you for Sharing this,
This will really Help most of Yoga 13 users and Windows 7 fans,
Kudos for this!
Can you also let us know what are drivers you're still missing? Can you post the Hardware ID of those maybe we can help,
Thanks and Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Windows 7 - HP Laserjet 8500 print driver problem

I have tried everything imaginable to correct this HP 8500n print driver problem with no success, please help!
I cannot correct or get rid of a reoccurring “Incompatible Print Settings” error dialog box message that repeatedly states that “There are one or more conflicting settings. One of the settings is: Output Bin: Mailbox 1, Accessory Output Bin: Not Installed”. The radio button options are “Restore my previous settings or Keep this setting, and I will change it later”. This same dialog message repeats 13 times for all the other various conflicts each time you click on printer properties to change to 2 sided printing or any other printer settings. This printer does not have any of these features attached or set into it.
I am a volunteer that manages a number of computers on our small church LAN, 2 computers operating on MS XP-SP3, 2 on MS Windows 7 Home Premium and my 2 problem computers that came pre-installed with Vista Home Premium of which I have performed an HP OEM upgrade to Window 7.
I have isolated this print driver problem to the Vista operating system and even when computers are upgraded to Windows 7 does not correct this driver error. I have also tried every possible print driver variant of the HP 8500, HP8550, PCL, PS to include the Microsoft versus HP versions with no success. In each case I get this error yet neither of the XP computers or the computers that had Windows 7 as a original operating system have no problems with their print drivers for this printer.
Yes, I have repeatedly searched and upgraded the operating system and print drivers. In desperation I have even tried to find the correctly behaving Windows 7 print driver and transfer it to these Vista upgraded to Windows 7 machines. However I could not isolate the driver location.
The only thing I can conclude is that this errant HP print driver was resident within Vista and remains resident even after a HP OEM Windows 7 upgrade. Additionally, all of these computers are configured to access this printer via its static IP address on the network. The XP computers are 32 bit, all of the Vista upgraded to Win 7 and OEM Win 7 computers are 64 bit machines all with respective OS.
Can anyone please help me correct this problem?

Hi,
Unfortunately I can't see your uploaded image yet as it is awaiting approval from HP.
From what I can see you are correct that HP does supply drivers for this printer and that the drivers for your printer are already included with Windows 7. On the machines affected, try the procedure below to see if it helps at all
Next download revo uninstaller on the link below and install it.
http://www.revouninstaller.com/download-freeware-version.php
Disconnect the printer from the PC.
Run Revo and see if it finds any HP Printer Software installed. If it does, right click the software icon and select uninstall. During the process you may be asked to delete registry entries. If you are, just select all and click delete. Do the same for any left over files and folders. Once completed, reboot the PC.
Re-connect your printer to the PC and follow the guide below.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02536257
If this helps you will need to repeat the process on each of the affected machines.
Best wishes,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

What should I download as the wireless LAN driver/adapter

When I search for a wireless LAN driver in the hp site there are 8 or more wireless LAN drivers/adapters under different names. I do not know what exactly I need. please help me. I downloaded Mediatek 802.11wireless LAN adapter driver but I couldn't connect to any other laptop's wifi hotspot. Sometimes it says "Connecting to the connecting to the network is taking longer than usual".Because of this I can not play LAN games. I know the connection is limited but connecting to the network should be fast and there should not be any problem with it.

Hi there , Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I understand that you are looking to find out which Wireless LAN driver you should download for your Wireless Adapter. If you look under your device manager, what does it say under Network Adapters ? You can right click on the Network Adapter it lists and click Update Driver Software right there. Do you have any exclamations marks or red x's? Your could also use the HP Support Assistant to make sure that all of your updates have been done. That would put the proper driver in also. If you want to use the HP Pavilion 15-n240tx Notebook PC Driver Webpage, all you have to do is find out what the name of your Network Adapter is in your Device Manager. (Picture above) Please follow these provided troubleshooting steps, re-post and let me know how everything went. Thank you! Have a great day!

Network Controller Driver not found, hp proBook 4530s, Windows 7

I am using a notebook (proBook 4530s), with Windows 7, 64-bit, and in the device manager I get a yellow exclamation mark in Network controller even after downloading and installing the respective driver Atheros / Realtek Wireless LAN Driver(s). The driver packacge extracts itself and there is no confirmation of finishing the setup. The problem started after a BIOS update by the hp support assistant on my pc

You're very welcome. Below is the link to the driver you need for the Ralink wireless card in your notebook. http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_111782_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

Satellite Pro L500 - Can't install Realtek LAN driver

Hi All,
I have recovered a Satellite Pro L500 Windows 7 pro with disc created from notebook, but now can't install a Realtek LAN driver for the notebook.
The software driver installer dosn't seem to run correctly all the time, have tried several times to install, with only once a realtek "repair" option becoming available.
When I did manage to install driver I got a error "device failed to start". after recovery I also had problems with a "PCL simple communications controller driver",
which seems to have been a Intel MEI according to the VEN, DEV info displayed in systems info.
Are these problems related and how do I Install the required driver in a automated system if the system won't detect the hardware correctly?

Have downloaded from many sources the correct driver, but the motherboard or the OS is not discovering the network adaptor so even if the driver is installed the divice is not recognised as being there(physically installed). when installing the driver software i get the error from the realtek installer "Realtek network controller was not found. If in deep sleep mode is enabled please plug the cable". have no idea what or how deep slee is enabled and have reset bios settings to default and have reset cmos.

Slow internet speed due to Marvell Yukon LAN driver

Hello all!
I am a newbie here so not sure if I am supposed to ask this question here but anyway hope my problem gets solved somehow.
I am using Toshiba Satellite A200 Notebook, I got this last week and everything works fine except for my internet speed, its too slow. I am on a 10Mb/s plan but my speed is no where close to that. I am getting speeds near 200kb/s to 300kb/s max. After a lot of googleing I came to know that the Marvell Yukon LAN driver is the problem here.
According to some websites, we are supposed to roll back the driver to a previous version, I did this but still the speed does not want to increase. I have tried almost all the things I can do but getting nowhere so far. I have called my ISP, they say everything is looking good on their side, ran Norton Antivruis scan on this machine, disabled firewall, and the list goes on but nothing.
It would be great if anyone could help me out here.
Thanks in advance...

Hi,
did you checked your connection with another computer, if the problem still exists with another machine??
Would be really interesting...otherwise I suggest you to recover your machine to "factory-default". Maybe it solves something.
Another idea would be to remove the "Qos" (Quality of service)service from your network connection which virtually slows down the connection due to software reasons.
Please give some feedback and please tell me which system youre using (Vista, XP)
Thx
bye

Need network controller driver.

I need a network controller driver for my laptop as the wifi is not working at the moment. The only thing with a yellow exlimation mark in the device manager under other devices tab is the network controller. the hardware id's are as follow:PCI\VEN_168C&DEV_0036&SUBSYS_064211AD&REV_01
PCI\VEN_168C&DEV_0036&SUBSYS_064211AD
PCI\VEN_168C&DEV_0036&CC_028000
PCI\VEN_168C&DEV_0036&CC_0280

The first both devices: Ethernet and Network controller are LAN and Wlan card.
If you want to know more details about these devices, I recommend you to check this Toshiba document:
[How to identify an unknown device |http://aps2.toshiba-tro.de/kb0/HTD0302U00000R01.htm]
In such case it should not be a big problem to get the right driver.
Regarding the PCI Simple Communications Controller
Check this FAQ:
[What is a PCI Simple Communications Controller?|http://www.mytoshiba.com.au/support/items/faq/222]
You need Intel(R) AMT Management Engine Interface driver

LAN Driver

Hi,
I'm facing LAN installation problem (after installation the system still says no driver found for PCI simple communication.) which occoured from last month, I tried my best to resolve it but didn't understand by which mean the problem is occured.
Here is the link to the driver which I used earlier and now tried to install it again but dosen't working now.
Web Link:
http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=3232101&swLangOid=8&swEnvOid=4053
Download Link:
http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55284.exe
Please Help me.

Hi:
The PCI Simple Comms Controller needs the Vista HECI driver.
You may have to manually install it if the auto install doesn't get it.
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=3232101&swItemId=ir_46941_1&swEnvOid=2096
I have found that on the dc7700 and dc7800's sometimes the ethernet driver on the HP site doesn't work.
So, I use the the Intel 82566 Gigabit Network Connection driver directly from the Intel support site, if any dc7700/dc7800 gives me issues with the HP ethernet driver...
Unfortunately, I can't seem to get to the W7 driver. I think there is a problem with the Intel support site.

Satelitte C55 B5298 Network lan driver problem

Similar Messages

Maybe you are looking for