Satellite 100-103 (PSPA3E) no sound on Windows 7

Hi
I understand that this model is not supported under win7 but, since Toshiba claims, and quote, "For Toshiba PC models NOT listed below, Toshiba offers "Limited Driver" support on a clean installation of the Microsoft Windows 7 operating system." could someone please provide me with that "limited drive"?
The complete model information is: PSPA3E - OOMOO7PT - SN: 36023414w
Thanks in advance
Eduardo
Solved!
Go to Solution.

Hi Jerry
I was out of town for a few days, but returned today and tried to solve this problem following an advice you gave on another topic.
I removed both sound and video device and them install them beginning with the Conexant high definition driver.
It’s everything working now, problem solved!
Thank you again for your time.
Eduardo

Similar Messages

3000 N 100 / 0768 59G: kein sound unter windows 8.1

Hallo,
Ich will mein notebook 300N100 0768 59G von Windows XP auf Windows 8 or 8.1 umziehen.
Alles ist gut, nur die Sundkarte "soundmax integrated digital hd audio" funktioniert nicht.
Kein sound.
Ich habe einige Treiber getestet: soundmax
- Analog_Device_SoundMAX_6.10.02.6585
- lenovo-httpsoundmax-integrated-digital-hd-audio.drivers.informer.com-7ka216ww
- sp45115
- 3590_1b5841eade1ffba84176ae4f7b3fd2b0d8d26057.cab
- SoundMAX Integrated Digital HD Audio Driver 6.10.1.5140
Funktioniert nicht, HW nicht kompatibel?
In der Taskleiste sehe ich ein Lautsprechersymbol und auch Ausschlag beim Abspielen von Wav-Dateien.
Aber leider: zu hören ist nichts!
Kann mir jemand einen Tipp geben?
Gelöst!
Gehe zu Lösung.

Also, die treiber sind alle ok, der witz ist, dass man sie nicht per setup.exe installiert, sondern unter Hardware/neuen treiber den treiber suchen und aufrufen. Dann funktioniert die Installation richtig, auch das Mikro wird erkannt.

Satellite Pro P100 (PSPA4E) - No Sound Following Win 7 Clean Install

Hello, A European friend really struggling and looking for help.
I have just clean installed Win 7 Home Premium (64 bit) on a Satellite Pro P100 (PSPA4E) which was purchased in November 2006. It was previously running XP and I never installed Vista though the laptop is badged Vista Capable) I followed the Win 7 bios/driver/software install order but I now have no sound at all. Everything that I have tried so far has failed to fix it.
The laptop has a Conexant based audio solution with harman kardon speakers. Win 7 has installed the following driver which reports the following info.
High Definition Audio Device (Microsoft Driver version 6.1.7601.17514 dated 11/19/2010) and Device status: This device cannot start. (Code 10)
Hardware IDs:
HDAUDIO\FUNC_01&VEN_14F1&DEV_5047&SUBSYS_1179FF31&REV_1000 HDAUDIO\FUNC_01&VEN_14F1&DEV_5047&SUBSYS_1179FF31
There is a second exclamation mark in Device Manager for a further unknown device / uninstalled driver (showing code 28) for a device with a Hardware ID of ACPI\SMCB000 but I do not know what this device is!
Does anyone have any suggestions on a fix for my sound issue?
Thanks!
Martyn

Any one have any thoughts on this issue?
I have failed to locate a working / compatible Windows 7 x64 driver for Conexant HD Audio!
Perhaps there isn't one?
Perhaps I need to try harder?!?
Perhaps the on board sound solution featuring Conexant HD Audio is simply ****** as on www.conexant.com they say manufacturers have TOLD them NOT to make drivers available (... to poor unfortunate users)!!!
I think that manufacturers need to step up to the plate and support / help their customers. I own 4 Satellite Pro laptops running Vista x32 and Windows 7 x64. This one cost me well over £1,200 so I don't want to hear or conclude that it is simply scrap! That would represent truly poor value for money - the kind of business case that would undermine my belief that Toshiba laptops are the best in the business.
Ditto Microsoft - the Windows 7 x64 Upgrade Advisor tool gave me the all clear to upgrade this system. All generally appears fine EXCEPT the lack of sound.
Having now been exposed to the experience of many other laptop owners set out in various forums etc, covering both Toshiba laptops and some other major brands, I have to conclude that the Windows 7 Upgrade Advisor is flawed and that a successful upgrade is somewhat hit and miss affair. Beware!
That said, still hopeful that someone out there will be able to help me fix this issue?
Regards
Martyn
P.S. I can be reached by any Toshiba or Microsoft technical support guru looking to make a difference and help me out.

Display driver error while playing games on Satellite P100-387 PSPA3E

Hi,
I have a Satellite P-100 387 PSPA3E notebook (with Nvidia 7600 GO 256 MB) and no matter what game I play I get a stop error-blue screen of death all the time and must restart.
It happens while I play either "Command & Conquere-Tiberium Wars" or "Warcraft III" (which can run on ANY low end machine).Did the BIOS update and got the latest display driver from Toshiba support. Nothing. Also, Ive tryed ALL the driver versions from Nvidia and from LaptopVideo2go.com with modded inf-s.
Dont know what else to do so I post here before contacting Toshiba. I have a valid warranty on the machine. Running XP MediaCentar which came with it.
THX in advance!

I am heading to bed in a minute, but will look at driver details tomorrow.
I seem to remember that the latest BIOS update improved something to do with graphics.
Yes, I've got the 7600 go graphics card.
You have good ventilation to the laptop? (i.e. you don't have it running on a deep pile carpet, or on a big deep duvet or something?)
I tried the Nvidia drivers too but they dont work, it has to be the drivers from Toshiba.
Suggest you do a system restore, and if that does not help re-flash your BIOS
The link to the driver updates was good, but not for the laptop.

Satellite 100-192: Issues after the latest MS update...

Satellite 100-192.
After the latest MS update I first had the problem with the Realtek sound card driver. I solved it by applying the patch MS provided.
Now the problem is that the disc cleanup utility does not launch. Anybody any idea?

I just found out that my disc cleanup utility would not work because of a free program called Photo Toolkit. Although it is a nice little program to quickly edit photos, apparently it causes such problems when it is loaded.

Satellite 2400-103 changing from french to english keyboard

I have a french satellite s2400-103 laptop which is running english windows and software - which is fine as long as i don't have to type in a hurry.
Can anyone help me with the part number for an english keyboard and any ideas as to where i might get hold of one
thanks
Rob

Hi
The compatible keyboard for this unit you will be able to order form the Toshiba service partner in your country.
PS: I assume your keyboard language settings in the Regional and Language options are set to the UK layout. Try to change it to French. In this case you will get the same signs as on the keyboard mentioned.

Satellite A110-103 - 2GB RAM - gaming performance tuning - SOLUTION

Hello,
For those of you who have 2Gb RAM installed on laptop and want to play games like FEAR2-PROJECT ORIGIN this is a performance tuning that I tested on my Toshiba Satellite A110-103!
If you want to add 2Gb of RAM or more to your laptop please read [this post and my experience with RAM upgrades|http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=153005#153005]! It might help you save money!
Before having installed 2Gb RAM I used to have a 4096 Paging File set in Windows for C drive.
After I installed the 2GB RAM I wanted to play FEAR2-Project Origin at low settings.
However the game played horrible with low framerates. So I wanted to know if there is a way to disable Virtual memory(paging file) and only use real RAM.
Most threads regarding disabling paging files stated that there is no way or point in doing that!
Well I decided to give it a try!
I disabled paging file from *Start->Control Panel->System ->Advanced->Performance->Settings->Advanced->Virtual memory->Change->No paging file*. I rebooted my laptop and after the reboot in my case I could see the big difference in speed!
TEST: I opened FEAR2-Project Origin started to play and my character's movements where much more responsive and without lags! :D
Conclusion: In my case disabling Virtual Memory(Paging file) really boosted my gaming experience! And I play on a ATI X200M card with 256Mb shared memory!
Test this and if you get good results please post them here! I
Best regards,
Marius Gigi

Hi Marius
Thanks for this message
Usually the paging file should help you to increase the RAM performance
Usin the page file, the data which should be stored in RAM would be moved to HDD and therefore a parts of RAM would be free
However, thanks for this feedback and your observations!

Display Driver for Satellite 1400-103

Hello
I need a windows xp driver for a satellite 1400-103. I have searched the archive but cannot find one, can anyone help. Thanks

Hi!
For this oldie you must in *Archive*
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
*Archive* => Satellite => Satellite 14xx => Satellite 1400-103 => Display Driver
Bye

No sound on Windows 7 Boot Camp

I've had this problem for a while now, I just ignored it in the past, now I'm really fed up. I've tried everything, downloading Realteck, burning BootCamp drivers onto the CD (I have a Lion which came with no disc), I tried playing around with the Sound in Control Pannel. Someone please help me!

Then google for Cirrus Logic Audio for Mac running Windows.
Something like this...
MacBook Pro audio sound fix
http://realitypod.com/2010/07/macbook-pro-no-sound-in-windows-7-final-fix/
Cirrus Logic CS4206A (AB 11)
I tried downloading the "High Definition Codecs" driver from Cirrus Logic's website but the download link doesn't work.
http://www.cirrus.com/en/support/lic/lic3.html?uri=/en/pubs/software/CS4207WinVista_Win7_32-64-bit6-6001-1-30.zip
*MacBook Pro No Sound in Windows 7*
Posted by Geek on +Jul 23rd, 2010+
* You are running Vista or Windows 7 on a Macbook
* You have no or low audio/ sound. In macbook pro, you may also see a red light in your audio jack.
*Step 1:* Download the Macbook Pro Cirrus Logic CS4206A Driver from our server.
+(As a request, please do not hotlink this file anywhere else or our server will automatically remove the file from server.)+
+In case the above download link does not work google+ CirrusAudio.10.6.1.zip
*Step 2:* Extract the right type of Driver
(depending on your windows XP/ 7/ 32 bit/ 64bit)
Step3: for Windows 7 only: Right Click on exe file of driver.
Select Properties> Compatibility > run in compatibility mode
Select Windows Vista from drop down menu and Click OK
*Step 4:* Double click the driver and install.

Start Navigation sound in Windows 7 64 bit dissappeared

? [size="">I have been scratching my head over this one.
[size="">After doing a clean install of Windows 7 64 bit on a new build this week, and installing a new X-Fi PCIe Titanium Fatality Pro, I found the start navigation windows sound was no longer there - I am talking about the brief sound you hear, that sounds like a click, when you click a link, double click a folder to open , etc. I could find the sound in windows sounds, but when I pressed test I could not hear it.
[size="">
[size="">After much trial and error, I discovered that I had to disable sound blaster enhancements, in the properties tab for speakers in the sound card settings. I now have that windows sound back.
[size="">When I enable sound blaster enhancements, it goes away, when I disable them, it is back to normal.
[size="">
[size="">Is this normal or unique to me?

Wow, that fixed? my problem also by disabling soundblaster enhancements. How were you able to figure that one out? I was trying to figure it'sout also many months ago when I first got windows 7 beta and couldn't do it. Anyway,
Seems like most people don't like this start navigation sound, but I do.
I don't like the fact of having to disable soundblaster enhancements also.
Have you noticed that if you change the windows theme to something else it will actually work?

Never used microphone input before, sound recorder window okay, no sound output.

Sound from sound recorder input goes nowhere, a sound window is supposed to open, it does not.
There is some software missing in my pavilion g7 laptop. Media player sound is fine, internet sound
is fine, only sound missing is from the microphone input. The sound recorder window is open and the
recording bar is moving as the input varies, how do I get the sound to the speakers. Never used this
option before, it might be defective from the factory.
This question was solved.
View Solution.

Problem solved. You cannot turn on computer with the microphone or other audio cable plugged in.
Otherwise the computer does not respond to the inputs, you have to plug in the microphone or audio
cable after logging in and then a window will open that allows you to select the that input over the default.

No sound in Windows

No sound in Windows. Can not use radio or streaming

I posted this earlier this afternoon after trying multiple suggestions online. then I found the Answer:
http://www.simplehelp.net/2009/01/26/how-to-get-sound-working-in-windows-7-runni ng-via-boot-camp/
worked immediately

No sound in Windows 7 Pro

Hi,
I installed windows 7 pro to my 2011 imac but I cannot install the IDT Sigma Tel driver. I have no sound in Windows 7 but sound drivers seems to be installed. I tried all possible ways to fix it but there is no solution so far. Can you help me with that?

And still no one wants to provide a solution for this. Great work Apple, you are very helpful !!!!

What CD/DVD drive is compatible with Satellite 1400-103

Hi
I Have Been Looking For A Replacement Dvd Rom For My Toshiba Satellite 1400-103 and I can't Find Any one.
Due To It Been So Old So I Just Wondering If There Are Other Compatible Dvd Drives That I Can Buy For My Laptop?
Thanks

I think this CD/DVD drive could be compatible:
- Toshiba SD-R2102
- Matsu****a UJDA720**
- TEAC DW-28E**
- Toshiba SD-C2502**
- TEAC DV-28E-B34
- Hitachi GDR-8081N-ATAB**
All this drives I have found in the user manual for the Sat 1400-103
PS: User manual can be downloaded from the Toshiba page too ;)

How to turn off volume adjustment sound under Windows 7

Hey all,
I'm running Windows7 x64 on an Intel iMac (July 2010 revision).
Things are running well for the most part. However, I am unable to find a way to turn off the blooping sound played when adjusting the volume in Windows 7 (I know how to turn it off in OS X). I have tried turning off all system sounds under Windows,but the volume adjustment sound still plays. Does anyone know how to turn this off? I find it jarring. I would appreciate any help that anyone can give.
Thanks.

That too bad because I use the MBP to do my radio show and it's very annoying. I know you can turn it off on the mac side.

Satellite 100-103 (PSPA3E) no sound on Windows 7

Similar Messages

Maybe you are looking for