Satellite 100-112 is dual (latin/hebrew) or just hebrew letters?

Could someone please tell me wheter the hebrew keyboard for Toshiba Satellite 100-112 is dual (latin/hebrew) or just hebrew letters?

Hello Dusan
In my opinion the keyboards are country specific and I really dont believe that you will find Hebrew keyboard only but combination of Latin and Hebrew symbols. I saw for example Japanese and Russian keyboards and both of them have had both symbols (Latin symbols are much smaller but allow you to type on English).
I recommend you to contact Toshiba authorized service partner in your country and ask them if they can order one keyboard for you.
The addresses you can find under http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true
Good luck!

Similar Messages

Satellite M40-112: DVD writing takes to long

Hallo, my friends, I've a Satellite M40-112 which was bought 4 months before. Now I have problems with my DVD-Ram, the writing of 4xDVD-RW or 4xDVD-R of a volume of 4.3 G normally takes more than 45 minutes, sometimes even one hour. The transfering of data on DVD-RW or DVD-R of the same volume also takes the similar time. Meanwhile, the CPU occupying rate amounts to 100% when writing or reading the DVD-RW/Rs. I've tried the same jobs on my friends Satellite L20 series, the average CPU occupying rate was normally only 10-20%. Could some experts give me your treasurous suggestions or ideas? Thanks in advance.

Hi my friend
It is very strange. A friend of mine has the same unit and we have created a few DVD movies and burning procedure is much faster. I dont know which burning software you use but please check if the option called simulation is activated. If yes disable this.
Bye

Windows 8 does not recognize DVD drive on Satellite P775-112 - code 19

I have a Satellite P775-112 that was previously running Windows 7.
This weekend I upgraded to Windows 8 Pro RTM.
Following the upgrade, the DVD drive is no longer recognized.
In Device Manager the drive "MAT****A BD-MLT UJ240EF" has a warning symbol, and the Device Status in Properties is "Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)".
I've tried everything I've found on the web without success:
- Reinstall driver (http://technet.microsoft.com/en-US/library/cc772156)
- Look for and remove UpperFilters / LowerFilters values in the registry (http://support.microsoft.com/kb/314060) : in my case they weren't present
I also tried connecting a USB DVD drive to my laptop - it failed with the same Device Status in Device Manager. Which suggests the problem isn't specific to my DVD hardware.
Any suggestions welcome!
Thanks

Hi guys
Found a solution here:
http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/bulletinDetail.jsp?pf=true&soid=3516888
*Uninstall the Toshiba programs:*
TOSHIBA Recovery Media Creator
TOSHIBA Disc Creator
Then restart your PC using the Power-->Restart option in Windows 8.
Your CD/DVD should be accessible now.
For help with uninstalling these programs follow the instructions below
*To Uninstall a program or application:*
1. At the START screen type Control Panel
2. Select Programs --> Uninstall a program
3. Find the two programs listed above and uninstall these applications
4. After the application programs are uninstalled restart your computer using the Power-->Restart option in Windows 8
5. When the computer power back on the CD/DVD drive should be available
If the CD/DVD drive still does not appear follow the instructions below to uninstall a device driver
*To uninstall a device driver:*
1. At the START screen type Device Manager
2. Select Device Manager > DVD/CD-ROM drives > right click on the device displayed > select Uninstall.
3. After the driver uninstalls, power down you computer using the restart method. The driver will install automatically when the computer restarts.
4. The CD/DVD drive should now be shown.

Cannot use product key for Vista installation on my Satellite U400-112

HI, NICE DAY
I BOUGHT TOSHIBA SATELLITE U400-112 , WINDOWS VISTA , I FORMATED MY LAPTOP THEN I SETUP WINDOWS VISTA , BUT WHEN I INTRED THE PRODUCT KEY (THAT IN THE LAPTP`S STICKER) , A MESSAGE APPEAR AND TELL THE P K IS INVALID !!!
BY THE WAY, MY WINDOWS VISA IS A COPY CD OF THE ORIGENAL VISTA, IT CAN BE UPTATED BUT DOES`T ACCEPT MY LAPTOP PRODUCT KEY!!!
WAIT FOR HELP, THANKS.

hi
i get answer by search results
ther is
Hi!
The product key on the bottom side of the notebook is an OEM key and belongs to the preinstalled OEM version. That means you can??t use this key with a normal Vista installation disk that you can buy on the internet or from a computer shop.
If you want to install Vista you should a Toshiba recovery disk or a Microsoft disk with the corresponding product key.
You can order a Toshiba recovery disk from Toshiba directly:
https://backupmedia.toshiba.eu/landing.aspx
Bye
thanks

Satellite A50-112: F1 key not work for entering Bios

my toshiba Satellite SA50-112 not entering into BIOS or CMOS setup because of F1 key is not functioning what i can do for changing the boot sequence to CDROM by alternative way.
please help us to work better

There are THREE ways to make your notebook boot from CD:
1) You can adjust the BIOS setting by entering into it with the key "ESC" (not F1 as you said before)
2) You can boot directly on CD by holding down the key "C" during starup
3) You can make the "Select Boot device menu" appear by holding down the "F12" key.
All above key combinations work DURING STARTUP of your notebook only. Therefor try your timing ;)
Good luck :)
electrochain

Satellite 100-192: Issues after the latest MS update...

Satellite 100-192.
After the latest MS update I first had the problem with the Realtek sound card driver. I solved it by applying the patch MS provided.
Now the problem is that the disc cleanup utility does not launch. Anybody any idea?

I just found out that my disc cleanup utility would not work because of a free program called Photo Toolkit. Although it is a nice little program to quickly edit photos, apparently it causes such problems when it is loaded.

How to reformat Satellite A50-112?

Hi,
Can anyone tell me how to reformat a Toshiba Satellite A50-112
Thanks
Gazza

Hi Gazza,
To reformat your notebook you should insert the recovery CD into your optical drive and then reboot the notebook while pressing the 'C' key. This will cause your notebook to boot from the recovery CD which will then start the re-install process.
Note that this process will completely reformat your notebook and return it to its original condition with the complete loss of any of your own data and non-original programmes. PLease make sure that you have a backup of your own data before you do this.
regards,

Is Second Hard Drive possible in Satellite P775-112?

Can any one please tell me if yo can insert a second Dard Drive to the Tosiba Satellite P775-112?
Regards

Hi
I think the 2nd HDD is not possible but check if the second HDD bay contains HDD connector if the connectors are not available then the motherboard does not support 2nd HDD.

Display Driver for W2k for Satellite L20-112

hello!
i am looking for a display driver for the Satellite L20-112 for Windows 2000.
Can anybody please help me. I am looking for the Driver for a long time. I have the ATI Radeon Xpress 200M.
I downloaded the Catalysp 5.13, but it still say that "Video Driver not found - INF Error".
Thankx for helping
bye

Hi Kevin,
As far as I know the L20 range was only supplied with Windows XP so it is unlikely that you will be able to get a suitable Windows 2000 Display Driver from Toshiba.
As you have already found out it is usually not possible to use the graphics manufacturers drivers directly since the graphics card is specially modified for use in a notebook.
You could try using third party drivers from sites such as http://www.omegadrivers.net/
best of luck

How do I move an entire app to a dual monitor? Not just a window?

How do I move an entire app to a dual monitor? Not just a window? I can drag single windows, but if I move a window to the second monitor and hit a button, like 'New', that opens a new window, then it opens the window in the first monitor. I want it to open in the second monitor instead.

Right. Mail remembers as well. I have the menubar set on my larger display, and the main Mail window on the MBP display. When I create a new message, it displays the composition window on whichever display I used the last time for composition. So after the first time I moved the composition window to the larger display, it always opens on that display. I can't remember if it remembers that behavior after taking the MBP on the road, where I use only its display, and then reconnect the second display back at home.
Mark

Satellite U400-112: can't format local disk (damaged MFT?)

Hello!
I got rather serious problem with my HDD.
HDD 250Gb
C: 116Gb - NTFS - Windows XP (Vista initially)
D: 1,5Gb - NTFS - (Vista Recover?..)
E: 117Gb - RAW (was NTFS before crash)
MFT of local drive E: was damage because of the virus attack (I hope not because of my foolishness!). It was NTFS, now it is RAW. I recovered all necessary data from lost partition with program ZAR, but all my attempts to recover or just format E: remained unsuccessful.
No bad sectors found on HDD. Windows standard tool for formatting disks fails: "It is impossible to finish formatting of E:".
Before this problem with drive E:, I got several difficulties with HDD. I have never re-divided disks, as from the very beginning Partition Magic identified it incorrectly. I tried Partition Magic 7 and 8.
Link: [ Error screensaver|http://cs1498.vkontakte.ru/u169802/154397/x_3a82b4fb.jpg]
The problem is that special programs (I tried "Find and Mount") also could not identify partitions to correct defected MFT. I thought that low level format may help me, but i heard, what use of any applications from other producers can probably destroy my HDD. Are there any special applications from Toshiba developed for such cases? Or you may advice me something else?
Thanks for your help!
P.S. These applications didn't helped me:
Find and Mount (doesn't find HDD)
Acronis Recovery Expert (doesn't find HDD)
OnTrack EasyRecovery Professional (didn't fix error, but helped with data recovering)
HDD Regenerator

So have you recovered all your important data?
I would just run Recovery to restore the HDD back to its factory state. If Recovery fails, you can try removing the partitions using FDISK from an MSDOS boot disk. Free bootdisks can be found at www.bootdisk.com
FDISK can also repair a Master Boot Record by running this command: FDISK /MBR
But its not 100% reliable, it could cause more harm than good.

Satellite U200-112: Switching between monitors

Sattelite U200-112.
At switching from the display notebook on the external monitor the resolution is exposed to the display, instead of the external monitor. Who faced such problem?

My English language is not so perfect but I believe in your case the option called Extend my Windows desktop onto this monitor is enabled. Am I right?
Anyway, if the external monitor is properly connected please use FN+F5 key combination to switch between notebook LCD display and external monitor.

USB/Serial converter for Satellite P100-112

Hi, I need to buy a usb/serial converter for my P100-112. The one I have I can't get it to work with my present machine. Advice as to what to buy would be appreciated.

Hi buddy,
I googled a bit around for you and I found a example for a converter which might be useful for you:
http://www.ramelectronics.net/html/usb_serial.htm
Plz give some feedback what you exactly need, maybe we find some better stuff..
Greets

Satellite 100-103 (PSPA3E) no sound on Windows 7

Hi
I understand that this model is not supported under win7 but, since Toshiba claims, and quote, "For Toshiba PC models NOT listed below, Toshiba offers "Limited Driver" support on a clean installation of the Microsoft Windows 7 operating system." could someone please provide me with that "limited drive"?
The complete model information is: PSPA3E - OOMOO7PT - SN: 36023414w
Thanks in advance
Eduardo
Solved!
Go to Solution.

Hi Jerry
I was out of town for a few days, but returned today and tried to solve this problem following an advice you gave on another topic.
I removed both sound and video device and them install them beginning with the Conexant high definition driver.
It’s everything working now, problem solved!
Thank you again for your time.
Eduardo

Satellite R630-112 - Service Station has never showed any update or alert

Hi,
I'm tired of manually updating my drivers and toshiba software, because Service station does not show any update or alert. I have relied on Tempro Alerts and on manual comparison of versions and dates.
Has anyone had the same problem? Any solution for it?

> the wireless connection goes down a lot at my work network.
This would explain why updates are important for you. In this case I would also search for driver updates because this shouldnt happen.
Anyway, this can have different reasons. First of all I would disable the WLAN power saving feature of WLAN card. This can be done in Windows power management. You have to do this for every power profile. Maybe this can help you:
http://aps2.toshiba-tro.de/kb0/HTD84026Q0000R01.htm
Wireless Adapter Settings should be set to maximum performance!
If it doesnt help you can try a WLAN driver update. You can do this yourself and newest version can be downloaded here:
http://aps2.toshiba-tro.de/wlan/

Satellite 100-112 is dual (latin/hebrew) or just hebrew letters?

Similar Messages

Maybe you are looking for