Satellite 1800: dim monitor - How to change the contrast

Hi, satellite 1800 has a dim screen that I cant seem to resolve. The images are just about visible. Its fine with an external monitor-is there a contrast button anywhere?!

Hi
You can change the display brightness with the key combination FN+F6 and FN+F7.
If it is not possible so I assume there must be something wrong with the hardware (FL inverter)
Usually if this part is defect the display is not clear. In this case you should contact the ASP in your country.

Similar Messages

How to change the contrast of a video clip ?

Hi there,
I am embarassed to ask this basic & elementary question but it is driving me nuts finding it !
I want to adjust the contrast of the video clip that I imported.
When I went to the color board, it only have COLOR, SATURATION & EXPOSURE to be adjusted.
But where is the option to adjust CONTRAST located ?
Thanks & regards

Tom Wolsky wrote:
Open the video scopes and set it to waveform monitor. You adjust the contrast in the exposure board. Reduce the shadows to zero and the highlights to 100. Adjust the mids as you like.
Sorry Tom, my bad ... how do I open the video scope ?
When I click the video clip in the browser, what shows in the Video tab on the info panel are only:
1) Color - which upon clicking only have the option to tick & untick the "Balance: Not Alaysed" checkbox
2) Spatial Conform
Any ideas ?
Thanks

Satellite Pro C660-1JL - How to change the language of Windows 7?

Hello,
I bought Toshiba with preinstalled official Windows 7 Professional 64 service pack 1. And would like to change language from German to Russian.
According to instructions from microsoft home page I could not get the result. MUI pack is not shown when searching for Windows up-dates (some other up-dates are only available, but not language pack)...
What would you recommend how to solve this problem ?
Its Satellite Pro C660-1JL

Hey,
> I bought Toshiba with preinstalled official Windows 7 Professional 64 service pack 1
You cant change the language on Windows 7 Professional, this is only possible on Windows 7 Enterprise (volume license) and Windows 7 Ultimate.
So if you want another language, buy Windows 7 Ultimate or be happy with current language of Windows 7 Professional. ;)

How to change the status value?

Hi Experts
We landed in the starnge situation. We defined a multi task EE Monitor activity to change the status attribute to past due when particular internal event code is overdue. We forgot to assign the correct EE monitor Activity to EE Profile and the report /SAPTRX/EE_MONITOR converted the internal event code to overdue but did not change the status to past due for lakhs of records.
Now we assigned the correct EE Monitor activity to the EE profile. How do we change the status to past due for already processed records? Is there any standard program available for this purpose or shall we need to write any custom program for it?
Your quick response is much appreciated.
Thanks
Ravi

Hi Ravi,
the coding in the EE Mon activity SET_STATUS can be used as template. The method is unfortunately protected.
It depends if you use EE History (Setting in EH Type Customizing). If yes it is importatnt to update also EE History table and the counter in the EH header for the History.
Maybe the easiest way would be to send with a report messages to the EH and do the update in the rule set with the standard activity.
You could use a new event code and react on it in the rule set.
Best regards,
Steffen

How to change the pixel dimension height?

I need to fix the pixel dimension height "768" for tiff images via scripting. Kindly advise me how to change the height for the images.

i am using vb.net i can't able to fix exact width and heigth for my below code
appref.Preferences.RulerUnits = Photoshop.PsUnits.psInches
docref = appref.Open(CheckerPath.Path & \" & InputFile_From_Illust)
TiffSv.ImageCompression = Photoshop.PsTiffEncodingType.psTiffLZW
docref.SaveAs(IllustFolder + "\" + IllustFile.Name, TiffSv)
docref.ChangeMode(DestinationMode:=Photoshop.PsChangeMode.psConvertToRGB)
TiffSv.EmbedColorProfile = False
Dim heg, wid As Double
heg = 768 / 300
wid = 576 / 300
docref.ResizeImage(wid, heg, Resolution:=300)
But its fixing width as 0.46 and height as 0.613 why its happen i don't.
please advise me.

How to change the time ??

Hello guys,
I would like to know how to change the time in a 7970G cisco phone, I dont know if the phone gets the date from a server, but checking typing this command: show clock in the CME UC520, date and time shows correct , I powered off / powered on the phone and it remains with the same Wrong time (just time no date), any adivce would be very well received. Thanks!

Hi Gerardo,
Complete these steps on the Cisco CallManager Express in order to display the correct time:
Configure the type 7970 command under the ephone.
ephone 1
device-security-mode none
mac-address 0017.59E7.492C
type 7970
button 1:1
Configure the time-zone command under the Telephony service.
telephony-service
max-ephones 5
max-dn 5
ip source-address 10.1.0.1 port 2000
auto assign 1 to 5
time-zone 8
dialplan-pattern 1 ... extension-length 4 extension-pattern 9000
voicemail 6000
max-conferences 12 gain -6
transfer-system full-consult
create cnf-files version-stamp 7960 Feb 05 2009 12:44:03
Configure the create cnf-files command under the Telephony service in order to implement the change in step 1 and 2.
CME-CUE(config-telephony)#create cnf-files
CNF file creation is already On
Updating CNF files
CNF files update complete
Verify
Comlete these steps in order to reset the Cisco 7970 IP Phone:
Press the Settings button on the Cisco 7970 IP Phone.
Enter the **#** key sequence on the phone keypad in order to reset the phone.
The correct time displays on the Cisco 7970 IP Phone after the reset.
Troubleshoot
Complete these steps if the time displayed on the Cisco 7970 IP Phone is incorrect:
Verify the phone configuration on Cisco CallManager Express.
Display the 7970 configuration file on Cisco CallManager Express. The name of the file is xmldefault7970.cnf.xml, which is located in the system:/its/ directory. Complete these steps in order to display the configuration file:
Log in to Cisco CallManager Express.
Complete these steps in order to display the 7970 configuration file:
Issue the cd system: command.
Issue the cd its command.
Issue the more xmldefault7970.cnf.xml command in order to dump the configuration.
Verify that the time zone parameter is correctly configured . The output of the command is shown here:
CME-CUE#more xmldefault7970.cnf.xml
M/D/YA
Greenwich Standard Time
2000
10.1.0.1
{7970 Feb 05 2009 12:31:07}
2
English_United_States
en
United_States
United_States
0
http://10.1.0.1:80/localdirectory
Complete these steps in order to verify that Cisco CallManager Express successfully sends the 7970 configuration file to the Cisco 7970 IP Phone:
Log in to Cisco CallManager Express.
Issue the debug tftp events command.
Issue the terminal monitor command.
Reset the Cisco 7970 IP Phone.
This output shows the results of the debug tftp events command. The bold text indicates the phone has successfully received its configuration file.
Feb 5 12:38:21.539: TFTP: Opened system:/its/XMLDefault7970.cnf.xml, fd 0, size
1033 for process 287
Feb 5 12:38:21.543: TFTP: Finished system:/its/XMLDefault7970.cnf.xml, time 00:
00:00 for process 287
Feb 5 12:38:24.383: %IPPHONE-6-REG_ALARM: 20: Name=SEP001759E7492C Load= SCCP70
.8-3-2S Last=Phone-Keypad
Feb 5 12:38:24.427: %IPPHONE-6-REGISTER: ephone-1:SEP001759E7492C IP:10.1.0.4 S
ocket:1 DeviceType:Phone has
registered.
Regards,
Justin

How to change the OraSSO login link in webcache/load balance

Hi
we have 10gAsR1 installed as a Portal instance. We have 6-server
load balancer => webcache as loadbalancer (listening port 80)
Wb ch1 and wb ch2 => webcache (listening port 7777)
portal1 and portal2 => Portal listening 7778
infra =>Infrastruture with repository Portal/Oracle SSO (listening 7777)
This set up is working fine for our intranet setup, now we need to open this for couple of external clients. Well initially we need to open on the load balancer server on port 80 for external team to access, it works fine when we make it publc access.
Now when we need to make it SSO (siteminder) enables, when users click on login link it first goes oracle sso then it internally redirects the page to site minder sso.
Well, I have noted that the sso server details are mentioned in global setting sso/oid details. Since we need to open this for external client we have to add a DNS entry for this so that we can allow its access over firewall..
Now I have made DNS name change at my infrserver level, now I need to update the change at the load balancer server (where wheb chache is running).
Any one know how to chang the URL at load balancer.
I am struck at this point please suggest how should i proceed..
Thanks,

Extract from Personalization Guide - Page Footer - Personalization Considerations
* If you wish to personalize the URL that points to the Privacy Statement for a page that displays a standard Copyright and Privacy (that is, its Auto Footer property is set to true), set the Scope to OA Footer, in the Choose Personalization Context page of the Personalization UI.
* If you wish to personalize the URL that points to the Privacy Statement for a page that displays a custom Copyright and Privacy (that is, its Auto Footer property is set to false), set the Scope to Page in the Choose Personalization Context page of the Personalization UI. In the following Page Hierarchy Personalization page , identify and personalize the Privacy page element.

How to change the privacy statement link url

I looked into the previous threads , could not find the answer to "Changing the privacy statement url to clients privacy statement url".
I am talking about the privacy statement URL in the page that user see it as soon as user logs into the e-business suite.
I have read the previous theads and developers guide regading how to show or hide this autofooter thing. but could not find any thing about how to change the one in the login page.I even looked ino personalization but could not find a place to change this url. please HELP.
Another question is " is it ok to show privacy statement in just the first page and hide it in rest of the application pages?"
Thanks
karan

Extract from Personalization Guide - Page Footer - Personalization Considerations
* If you wish to personalize the URL that points to the Privacy Statement for a page that displays a standard Copyright and Privacy (that is, its Auto Footer property is set to true), set the Scope to OA Footer, in the Choose Personalization Context page of the Personalization UI.
* If you wish to personalize the URL that points to the Privacy Statement for a page that displays a custom Copyright and Privacy (that is, its Auto Footer property is set to false), set the Scope to Page in the Choose Personalization Context page of the Personalization UI. In the following Page Hierarchy Personalization page , identify and personalize the Privacy page element.

How to change the default apex port

hi,
i am installed apex4.0 in EBS R12 DB with HTTP Server method. my apex is running from application server 10g and default port is 7777.
URl: http://hostname:7777/pls/apex
My EBS R12 running on http://hostname:8007.
is it possible to change the apex port to EBS Apache port(8007) in R12 and finally i want to change above URL like this
Before change : http://hostname:7777/pls/apex
After Change : http://hostname:8007/pls/apex
Thanks in advanace....

How to Change the Default SSH Port from Terminal ?
now showing default SSH Port 22 i need change it pls help me how can do

How to change the default Path of Prompt Played by MicroApp

Hi
I need to store all the Self Service application prompts in dedicated Media Server. I can modify location of all the Media files by passing the related URL form CVP application, however I need to know how to change the default location of Prompt file played by Play Media Microapplication in ICM Scripting.
Currently the default location taken by Play Media Micro App is the Media _Server.variable path set for VXML Server location while I have a separate Media Server.
Please advice how we can customize the MicroApp Media path.
regards
Kapil Kumar

Hi Kapil,
Try this in your ICM script, define set variables i.e.
set Media Server= ip address of media server
set Locale = en-us
set input Type = DTMF only
set App Media Lib = " you new location i.e. test "
So, the application path will be
http://media server ip address/en-us/test
hope this helps.
Cheers

How to change the default SSH port on Cat 6500 WS-SUP720-3B

I have been net searching this question and I find answers relative to other Cisco products but not for the 6500 series. We are running
entservicesk9_wan-mz.122-18.SXF17a.bin and would like to know how to change the default SSH listening port..
Thanks in advance..

Hi Neil,
Normally this is achieved via the "ip ssh port rotary " but unfortunately, this command is not implemented on your platform so ssh will only work on port 22.
Regards,
Nicolas

How to change the Default login script and the USER login script in Netware3.12

I need to cut down the disk map from Neware 3.12 in Win98 client's PC.
please tell me
how to change the Default login script and the USER login script in
Netware3.12 ?
Or is there any other ways to do this thing?
Thanks a lot!

On 4/6/2006 [email protected] wrote:
> how to change the Default login script and the USER login script in
> Netware3.12 ?
Please repost in the discontinued.forums.
Edison Ortiz
Novell Product Support Forum SysOp
(No Email Support, Thanks !)

How to change the default database charset to ISO8859-1?

Hi all,
I have created a table with a nvarchar field to store string, may i now how to change the default NLS charset to ISO88591 charset?
Thanks in advance.
chin.

Thank you!
I will try later!
But,who can tell me more detail !
thx

How to change the default time?

when you finish the action of dialing ,the CCM system recognize your finish after 10s .How to change the default time in Service Parameters ,which is the detail Parameters ?

Please see the following link for information on configuring the interdigit timeout.
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00800dab26.shtml
Hope this helps. If so, please rate the post.
Brandon

How to change the default currency in CJ32 and CJ33

Dear all,
As required by the user, I want to know how to change the default currency from controlling area currency to object currency in TCODE CJ32 and CJ33. Currently, the controlling area currency will be defaulted in the field "Views in".
Could any one help me? Points will be awarded.
Thank you.
Christina.
Edited by: Virendra Pal on May 5, 2010 8:34 AM

Hi Christiana ,
Once you are in tcode CJ30 / CJ32 , Enter either Project definition or WBS element and this shall take you to the Budget screen and once you are here you can find a drop down with two options .One is Controlling are currency and the other one is Object currency.
Since the Currency is set to Object currency in OPS9, System shall allow the budget values in Object currency and if the user wants to see the same values in Controlling are currency ,then the user needs to view the values in Controlling are currency using the drop down .
Regards
Judy

Satellite 1800: dim monitor - How to change the contrast

Similar Messages

Maybe you are looking for