Satellite 2060CDS: CD drive not found under Win98 - controller problems?

Dear all,
at the moment I'm on holiday at the baltic/Germany. There my TOSHIBA Satellite 2060 CDS had a Windows 98 crash and so I had to install OS new with recovery cd. After that I don't found CD-ROM drive any longer in Windows. Having a look into System and Hardware Manager there seems to be trouble with TOSHIBA primary IDE controller and TOSHIBA secondary IDE controller because there is a "!" infront of them.
I tried to reinstall OS approx. six times but unfortunately without success.
Please help me!
Tobi

Hi,
thank you for fast reply.
Unfortunately I have just Modem-connection (56k) and so I would like to say that it would be to hard to download Windows 98 service packs... :-(
Well, TOHSIBA Service Support answered me that it may be a hardware problem, so maybe the controller on the mainboard is demaged. I say thank you for this fast reply, but I'm suprised that I can copy data from CD-ROM to HDD in MS-DOS-Modus (starting with Windows start disk and CD-ROM-support).
So I still have hope that there is a software solution...
If you have any detailed hints or data for me - please let me know!!!
Thank you in advance.
Best regards,
Tobi

Similar Messages

  • IMac 24" .a valid DVD drive not found - 70012

    I try to insert a DVD to play on my imc , but the disc eject out after the drive search for no disc . I click on DVD player, message as a valid DVD drive not found-70012

    Sounds like a problem with the Optical Drive, I find them far too short lived in OSX anyway!???
    At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>Disk Burning & report what it says, like ...
    TSSTcorp CDDVDW SH-S222L:
      Firmware Revision:          SB02
      Interconnect:          ATAPI
      Burn Support:          Yes (Unsupported)
      Profile Path:          None
      Cache:          2048 KB
      Reads DVD:          Yes
      CD-Write:          -R, -RW
      DVD-Write:          -R, -RAM, -RW, +R, +RW, +R DL
      Burn Underrun Protection CD:          Yes
      Burn Underrun Protection DVD:          Yes
      Write Strategies:          CD-TAO, CD-SAO, CD-Raw, DVD-DAO
      Media:
      Media Type:          DVD-RW
      Blank:          Yes
      Erasable:          Yes
      Overwritable:          Yes
      Appendable:          Yes

  • Old iPod mini can't be recognized after formatting, and iTunes 'Apple Mobile Device Driver not found.'

    My roommate gave me an old iPod Mini a few days ago. It was working fine 'til I plugged it into my computer and it asked me to format it. I did, and now it cannot be recognized by iTunes or my computer. My computer views it as a "removable disk" which cannot be accessed. In devices, it is listed as an Apple iPod though, so I'm hoping not all is lost. I have tried many quick fixes I've read on internet (including changing disk letter) but to no avail. I have reinstalled the new iTunes and now that is telling me it has not installed properly, and when I ran diagnostics, it reads that the Apple Mobile Device Driver not found. I will copy & paste all the info from the diagnostic run below, and if anybody can help me with my new (old) iPod, I'd be everly greatful!
    Thanks!!
    Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
    TOSHIBA Satellite L775D
    iTunes 11.0.1.12
    QuickTime 7.7.3
    FairPlay 2.2.32
    Apple Application Support 2.3.2
    iPod Updater Library 10.0d2
    CD Driver Not Available
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 6.0.1.3
    Apple Mobile Device Driver not found.
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number
    Current user is not an administrator.
    The current local date and time is 2013-01-08 11:16:27.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    ATI Technologies Inc., AMD Radeon(TM) HD 6520G   
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Device Connectivity Tests ****
    iPodService 11.0.1.12 (x64) is currently running.
    iTunesHelper 11.0.1.12 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Standard OpenHCD USB Host Controller.  Device is working properly.
    Standard Enhanced PCI to USB Host Controller.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Most Recent Devices Not Currently Connected:
    iPod mini running firmware version 1.4.1
    Serial Number:    JQ******S42
    <Edited By Host>

    OMG same thing here; rather annoyed and now have set up accounts on 2 comps(both 64 vista ultimate); about to try my 32 bit vista on my lappy; we'll see... i don;t have high hopes thoush.
    What i knew about iPhone before buying it:
    What You Need
    To use iPhone, you need:
    A new two-year wireless service plan with AT&T
    A Mac or a PC with a USB 2.0 port and one of the following operating systems:
    Mac OS X version10.4.10 or later
    Windows XP Home or Professional with Service Pack 2 or later
    Windows Vista Home Premium, Business, Enterprise, or Ultimate edition
    iTunes 7.3 or later, available at www.itunes.com
    An iTunes Store account
    An Internet connection
    You must be at least 18 years old to open a new AT&T wireless account. You will need a
    major credit card to open a new iTunes Store account.
    Yeahyeah check all that stuff;
    Oh well; just when i thought i'd finally cross over to the beautiful packaging of APPLE. I remember in design school that form follows function. Thanks.
      Windows Vista  

  • Driver class 'org.gjt.mm.mysql.Driver' not Found JSP

    OS ->Windows XP Pro
    Tomcat version ->4.0.1
    jdk version -> 1.3.1
    database -> mysql
    Classpath = .;C:\jakarta-tomcat-4.0.1\common\lib\servlet.jar;C:\jakarta-tomcat-4.0.1\common\lib\mm.mysql.jdbc-1.2c\mysql_uncomp.jar;
    I am trying to run a function in a javabean to startup up a connection to a database. Code as follows...
    public void connect() throws ClassNotFoundException,
    SQLException,
    Exception {
    try {
    Class.forName("org.gjt.mm.mysql.Driver").newInstance();
    con = DriverManager.getConnection(
    "jdbc:mysql://localhost/Wrox ?user=root&password=lunchbox ");
    } catch (ClassNotFoundException cnfe) {
    error = "ClassNotFoundException: Could not locate DB driver.";
    throw new ClassNotFoundException(error);
    } catch (SQLException cnfe) {
    error = "SQLException: Could not connect to database.";
    throw new SQLException(error);
    } catch (Exception e) {
    error = "Exception: An unknown error occurred while connecting " +
    "to database.";
    throw new Exception(error);
    I call it from my jsp page code as follows.. connect in bold
    <%@ page language="java"
    import="java.sql.*, java.io.*, java.util.*, com.wrox.databases.*"
    errorPage="error.jsp" %>
    <jsp:useBean id="book" class="com.wrox.databases.Books" />
    <html>
    <head>
    <title> Wrox Press Ltd. </title>
    </head>
    <body>
    <h1> Wrox Press Ltd.</h1>
    <h2> List of Books </h2>
    <b>Add More Books</b>
    <form action="delete.jsp" method="post">
    <table border="1">
    <tr>
    <td><b>ID:</b></td>
    <td><B>Title:</b></td>
    <td><B>Price:</b></td>
    </tr>
    <%
    book.connect();
    ResultSet rs = book.viewBooks();
    while (rs.next()) {
    %>
    <tr>
    <td>
    <input type="checkbox" name="pkey"
    value="<%= rs.getString("Title_ID") %>" />
    </td>
    <td><%= rs.getString("Title") %></td>
    <td><%= rs.getString("Price") %></td>
    </tr>
    <%
    %>
    </table>
    Check books for deletion.<BR>
    <input type="submit" value="Delete All Checked Books">
    </form>
    <% book.disconnect(); %>
    </body>
    </html>
    The name of the bean is correct and so is the package it is stored under. I tried it in the bean and got "ClassNotFoundException" Could not locate DB driver". I tried it with DBtags and got
    Driver class 'org.gjt.mm.mysql.Driver' not Found
    any help would be really appreciated.

    When using any 3rd party library with tomcat. the jar file of that library has to be put in the WEB-INF/lib directory of your application. Then only tomcat will find it.
    So the my-sql driver would have come in a jar file. just put that jar file in the WEB-INF/lib directory.
    After that things should work. If they don't please post again.
    hope this helps.
    regards,
    Abhishek.

  • Sony MDR-zx550bn driver not found installing on Windows 7.

    I keep getting "driver not found" when trying to install my headphones on a Windows 7 computer. 

     
    Hi richardph22, 
    Welcome to Sony Community! 
    Possibly the driver/s (Bluetooth or Audio) is not properly installed or, for some reason, deleted on your computer. Kindly follow the troubleshooting guidelines here: 
    If you're trying to connect your headphones to your computer via Bluetooth, please follow these steps: 
    Reinstall Bluetooth driver -> Go to Device Manager -> Bluetooth -> right click and Properties -> Driver tab-> select Uninstall (DO NOT DELETE) -> restart the computer. The driver will be reinstalled. NOTE: If Bluetooth is not listed, check under Network Adapters -> Bluetooth. Or Click View -> Show hidden devices. 
    Download or update Bluetooth Driver -> visit the support page (website) of your computer and download the Bluetooth driver. 
    If the headphones plugged in to the computer via headphones jack, kindly follow these: 
    Reinstall Audio driver -> Go to Device Manager -> double click Sound, video and game controllers -> right click and select Properties -> Driver tab -> Uninstall the driver/s (DO NOT DELETE) -> Restart the computer. The driver/s will be reinstalled. NOTE: If Audio is not listed, click View -> Show hidden devices. 
    Download or update Audio Driver -> visit the support page (website) of your computer and download the Audio driver. 
    Hope these help.
    Regards, 
    Vincent 
    If my post answers your question, please mark it as "Accept as Solution"
     

  • Linux: driver not found

    The java program i made has been tested under windows XP with mySQL. I tried running the same program with a linux OS with J Connector installed, and I installed the RPM of ODBC.
    I receive an error when executing my script:
    mySQL exception: driver not found
    Are there any missing prerequesites for running my mysql program?
    I have not touched the DSN on linux aka obdc.ini because I do not know what to do, Is this a problem, and how would I alter it if this is the problem?
    Thank You

    I thought JConnector was a type IV JDBC driver that didn't use ODBC. You don't need a DSN for that, just a valid database URL.
    "Driver not found" - sure you don't just have a CLASSPATH problem here?

  • Can some one help me with diagnostic test result " apple mobile device driver not found"?

    I bought an iPhone 4gs 32gb from Singapore. iso 4. I'm living in Chennai, India. To connect it to my computer (windows XP,), I have downloaded iTunes 10.6.1.7. Unfortunately iTunes is not recognizing my iPhone.  I had tried to troubleshoot it by reinstalling iTunes (2 times). I have restarted the apple mobile device from control panel. I try connecting my iphone in another usb port. but no use. I don't know what am I missing?.  iTunes opens on my computer. but doesn't recognize my device. when I click on help. it says an "unknown error has occurred. your computer is not connected to internet. please check your internet connection and try again later". I don't know what to do? could you please help me? thank you so much for your help and time.
    when I update the usb driver (C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.Double-click the usbaapl file.) I followed the procedure from this site. http://support.apple.com/kb/TS1538 when I finished, it says "the specified location does not contain information about your software"
    I did the apple's diagnostics test on my computer. I'm pasting the result for your info.
    Microsoft Windows XP Professional Service Pack 3 (Build 2600)
    System manufacturer System Product Name
    iTunes 10.6.3.25
    QuickTime not available
    FairPlay 1.14.43
    Apple Application Support 2.1.9
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 5.2.0.6
    Apple Mobile Device Driver not found.
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 0013AC2C08548378
    Current user is an administrator.
    The current local date and time is 2012-06-28 15:23:45.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    Intel(R) G41 Express Chipset
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:        {D85300A1-330D-41ED-AC5A-EC032B22FBF0}
    Description:            Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller - Packet Scheduler Miniport
    IP Address:             192.168.1.3
    Subnet Mask:          255.255.255.0
    Default Gateway:    192.168.1.1
    DHCP Enabled:      Yes
    DHCP Server:         192.168.1.1
    Lease Obtained:     Thu Jun 28 15:17:19 2012
    Lease Expires:       Fri Jun 29 03:17:19 2012
    DNS Servers:         192.168.1.1
    Active Connection: LAN Connection
    Connected:             Yes
    Online:                    Yes
    Using Modem:        No
    Using LAN:             Yes
    Using Proxy:           No
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was unsuccessful.
    The network connection timed out.
    Basic connection to the store failed.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    The network connection timed out.
    iTunes has never successfully accessed the iTunes Store.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    UpperFilters: GEARAspiWDM (2.2.0.1),
    G: Optiarc DVD RW AD-7220A, Rev 1.01
    Drive is empty.
    **** Device Connectivity Tests ****
    iPodService 10.6.3.25 is currently running.
    iTunesHelper 10.6.3.25 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C8.  Device is working properly.
    Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C9.  Device is working properly.
    Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CA.  Device is working properly.
    Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CB.  Device is working properly.
    Intel(R) N10/ICH7 Family USB2 Enhanced Host Controller - 27CC.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.

    I have the same problem. I think that someone tried my iphone before me because when I want to reset it, I'm invited to enter a password that I didn't set. Also, when I go the Map application, the iphone indicate that I'm locateded in China while I'm in Tunisia. Now, I can't connect to my iphone to itunes, and I can't reset it because it ask me to enter a password that I didn't set.
    This is my post:
    https://discussions.apple.com/thread/4063223
    Please, we need your help.

  • JDBC Driver not found when connecting to Data Federator XI 3.0 SP3

    Hello,
    I am trying to connect Crystal 2008 to Data Federator however I am getting the Error
    Failed to open connection.
    Details: JDBC Driver not found.
    The JDBC Drivers are installed and working for the Universe Designer, however I am unable to get it working for Crystal. I am using the following connection parameters on Crystal:
    Connection URL: jdbc:datafederator://<<servername>>:3055/<<catalog>>
    Database Classname: com.businessobjects.datafederator.jdbc.DataFederatorDriver
    Any Advice on what I may have missed?

    The issue was solved, thanks to Patric Wan:
    u201CFailed to open the connection. Details: JDBC driver not found.u201D
    This means Data Federator JDBC driver was not added to:
    C:\Program Files\Business Objects\common\<version>\java\CRConfig.xml
    How to connect the Data Federator Server using JDBC?
    1. Retrieve the following files from the machine where Data Federator is installed, from the directory [data-federator-installation-dir]/JdbcDriver/lib.
        - thindriver.jar
        - avalon-framework-4.1.5.jar
        - jacorb.jar
        - log4j-1.2.8.jar
        - logkit-1.2.jar
    2. Copy these files to a directory of your choice ([your-jdbc-driverdirectory]).
    3. Add [your-jdbc-driver-directory]/thindriver.jar to CRConfig.xml   <Add to Classpath tag, you can refer to original sample.CRConfig.xml should be at: C:\Program Files\Business Objects\Common\4.0\java\CRConfig.xml, or search your BOBJ products install to find this file>
    4. URL: jdbc:leselect://<host>[:<port>][/[<catalog>]][[;param-name=value]*]
    Class Name : LeSelect.ThinDriver.ThinDriver
    Edited by: Craig Sander on Feb 12, 2011 8:22 PM

  • Windows 7 install stops at "CD/DVD driver not found"

    When trying to install Windows 7 with boot camp, all goes well until it stops and gives me the "CD/DVD driver not found". I have a mid 2010 Mac Pro with a 500 GB SSD drive. I have burned a DVD at 1X from a iso file.
    Thanks

    Can you verify the MD5/SHA1 of the DVD with the ISO using OS X 'openssl md5' or the M$ FCIV tool? The source of your ISO should be able to provide MD5/SHA1.
    OS X Example
    openssl md5 ~/Desktop/GRMCPRXVOL_EN_DVD.cdr
    MD5(/Users/MyName/Desktop/GRMCPRXVOL_EN_DVD.cdr)= 977f4f0f1400be91855789213e07b031
    Windows FCIV example
    D:\>C:\"Program Files (x86)"\FCIV\fciv
    // File Checksum Integrity Verifier version 2.05.
    Usage:  fciv.exe [Commands] <Options>
    Commands: ( Default -add )
            -add    <file | dir> : Compute hash and send to output (default screen).
                    dir options:
                    -r       : recursive.
                    -type    : ex: -type *.exe.
                    -exc file: list of directories that should not be computed.
                    -wp      : Without full path name. ( Default store full path)
                    -bp      : specify base path to remove from full path name
            -list            : List entries in the database.
            -v               : Verify hashes.
                             : Option: -bp basepath.
            -? -h -help      : Extended Help.
    Options:
            -md5 | -sha1 | -both    : Specify hashtype, default md5.
            -xml db                 : Specify database format and name.
    To display the MD5 hash of a file, type fciv.exe filename
    D:\>C:\"Program Files (x86)"\FCIV\fciv -add Windows8.1-64bit.cdr
    // File Checksum Integrity Verifier version 2.05.
    f104b78019e86e74b149ae5e510f7be9 windows8.1-64bit.cdr

  • Core Audio: Selected Driver not found. (-10202) error message and speakers don't work

    Apple just replaced my hard drive and now I'm noticing that I have no sound coming out of my internal speakers or earphone jack.  When I try to use garage band I get the following error message:
    Core Audio:
    Selected Driver not found (-10202)
    I read their article on the subject; I go to system preferences, sound then output devices where I'm supposed to select my device except there are none listed.  I tried to fix the problem by reinstalling the operating system using the CD's that came with the MacBook Air but that didn't work either.
    Here's the other problem, when I download the software update the update never loads.  The status bar just sits there even when I let my pc alone over night. 
    Any suggestions??
    FYI, i can't easily walk into a mac store for assistance.. gotta catch a plane to a different island.

    Update your Apogee and Symphony drivers to Mountain Lion versions...
    But the bigger question is.. How did you install Mountain Lion on a G5?

  • Drive not found in library database

    Greetings.
    I'm new to OSB and am having tape drive, volume problems.
    File system backups only complete successfully when drive (IBM4_0_0_1_1) is used. When OSB attempts to use other drives in the library it logs the following errors listed in "Transcript".
    I'm running OSB (10.4.0.3.0) on a Linux server (Oracle Linux Server release 6.0) with a SL500 library controller by a ACSLS(8.3.0) server.
    Please advise.
    Transcript:
    2014/04/23.11:44:01 ______________________________________________________________________
      2014/04/23.11:44:01
      2014/04/23.11:44:01 Transcript for job admin/83.1 running on x4440a
      2014/04/23.11:44:01
      2014/04/23.11:44:01 ---
      2014/04/23.11:44:01 No volume could be found in SL500 (for drive HP6_0_0_3_1) to use for job admin/83.1.
      2014/04/23.11:44:01 The problem using HP6_0_0_3_1 and the volume it contains, if any, is
      2014/04/23.11:44:01 drive not found in library database (library manager)
      2014/04/23.11:45:01 ______________________________________________________________________
      2014/04/23.11:45:01
      2014/04/23.11:45:01 Transcript for job admin/83.1 running on x4440a
      2014/04/23.11:45:01
      2014/04/23.11:45:01 ---
      2014/04/23.11:45:01 No volume could be found in SL500 (for drive HP5_0_0_2_4) to use for job admin/83.1.
      2014/04/23.11:45:01 The problem using HP5_0_0_2_4 and the volume it contains, if any, is
      2014/04/23.11:45:01 drive not found in library database (library manager)
      2014/04/23.11:46:01 ______________________________________________________________________
      2014/04/23.11:46:01
      2014/04/23.11:46:01 Transcript for job admin/83.1 running on x4440a
      2014/04/23.11:46:01
      2014/04/23.11:46:01 ---
      2014/04/23.11:46:01 No volume could be found in SL500 (for drive IBM5_0_0_1_2) to use for job admin/83.1.
      2014/04/23.11:46:01 The problem using IBM5_0_0_1_2 and the volume it contains, if any, is
      2014/04/23.11:46:01 drive not found in library database (library manager)
      2014/04/23.11:48:01 ______________________________________________________________________
      2014/04/23.11:48:01
      2014/04/23.11:48:01 Transcript for job admin/83.1 running on x4440a
      2014/04/23.11:48:01
      2014/04/23.11:48:01 ---
      2014/04/23.11:48:01 No volume could be found in SL500 (for drive HP4_0_0_2_2) to use for job admin/83.1.
      2014/04/23.11:48:01 The problem using HP4_0_0_2_2 and the volume it contains, if any, is
      2014/04/23.11:48:01 drive not found in library database (library manager)
      2014/04/23.11:49:01 ______________________________________________________________________
      2014/04/23.11:49:01
      2014/04/23.11:49:01 Transcript for job admin/83.1 running on x4440a
      2014/04/23.11:49:01
      2014/04/23.11:49:01 ---
      2014/04/23.11:49:01 No volume could be found in SL500 (for drive IBM5_0_0_2_1) to use for job admin/83.1.
      2014/04/23.11:49:01 The problem using IBM5_0_0_2_1 and the volume it contains, if any, is
      2014/04/23.11:49:01 drive not found in library database (library manager)
      2014/04/23.11:50:01 ______________________________________________________________________
      2014/04/23.11:50:01
      2014/04/23.11:50:01 Transcript for job admin/83.1 running on x4440a
      2014/04/23.11:50:01
      2014/04/23.11:50:01 ---
      2014/04/23.11:50:01 No volume could be found in SL500 (for drive HP5_0_0_2_3) to use for job admin/83.1.
      2014/04/23.11:50:01 The problem using HP5_0_0_2_3 and the volume it contains, if any, is
      2014/04/23.11:50:01 drive not found in library database (library manager)
      2014/04/23.12:00:01 ______________________________________________________________________
      2014/04/23.12:00:01
      2014/04/23.12:00:01 Transcript for job admin/83.1 running on x4440a
      2014/04/23.12:00:01
      2014/04/23.12:00:01 ---
      2014/04/23.12:00:01 No volume could be found in SL500 (for drive HP6_0_0_3_1) to use for job admin/83.1.
      2014/04/23.12:00:01 The problem using HP6_0_0_3_1 and the volume it contains, if any, is
      2014/04/23.12:00:01 drive not found in library database (library manager)
      2014/04/23.12:01:01 ______________________________________________________________________
      2014/04/23.12:01:01
      2014/04/23.12:01:01 Transcript for job admin/83.1 running on x4440a
      2014/04/23.12:01:01
      2014/04/23.12:01:01 ---
      2014/04/23.12:01:01 No volume could be found in SL500 (for drive HP5_0_0_2_4) to use for job admin/83.1.
      2014/04/23.12:01:01 The problem using HP5_0_0_2_4 and the volume it contains, if any, is
      2014/04/23.12:01:01 drive not found in library database (library manager)
      2014/04/23.12:01:24 ______________________________________________________________________
      2014/04/23.12:01:24
      2014/04/23.12:01:24 Transcript for job admin/83.1 running on x4440a
      2014/04/23.12:01:24
      2014/04/23.12:01:25 ---
      2014/04/23.12:01:25 No volume could be found in SL500 (for drive IBM5_0_0_1_2) to use for job admin/83.1.
      2014/04/23.12:01:25 The problem using IBM5_0_0_1_2 and the volume it contains, if any, is
      2014/04/23.12:01:25 drive not found in library database (library manager)
      2014/04/23.12:04:01 ______________________________________________________________________
      2014/04/23.12:04:01
      2014/04/23.12:04:01 Transcript for job admin/83.1 running on x4440a
      2014/04/23.12:04:01
      2014/04/23.12:04:01 ---
      2014/04/23.12:04:01 No volume could be found in SL500 (for drive HP4_0_0_2_2) to use for job admin/83.1.
      2014/04/23.12:04:01 The problem using HP4_0_0_2_2 and the volume it contains, if any, is
      2014/04/23.12:04:01 drive not found in library database (library manager)
      2014/04/23.12:05:01 ______________________________________________________________________
      2014/04/23.12:05:01
      2014/04/23.12:05:01 Transcript for job admin/83.1 running on x4440a
      2014/04/23.12:05:01
      2014/04/23.12:05:01 ---
      2014/04/23.12:05:01 No volume could be found in SL500 (for drive IBM5_0_0_2_1) to use for job admin/83.1.
      2014/04/23.12:05:01 The problem using IBM5_0_0_2_1 and the volume it contains, if any, is
      2014/04/23.12:05:01 drive not found in library database (library manager)
      2014/04/23.12:05:21 ______________________________________________________________________
      2014/04/23.12:05:21
      2014/04/23.12:05:21 Transcript for job admin/83.1 running on x4440a
      2014/04/23.12:05:21
      Backup started on Wed Apr 23 2014 at 12:05:51
      Volume label:
      Volume tag: LEV018
      Volume UUID: 203f144a-ad72-1031-9e4c-002128001bbe
      Volume ID: mf_2min-000025
      Volume sequence: 1
      Volume set owner: root
      Volume set created: Wed Apr 23 12:05:51 2014
      Volume set expires: Wed Apr 23 12:07:51 2014
      Media family: mf_2min
      Original UUID: 203f144a-ad72-1031-9e4c-002128001bbe
      Archive label:
      File number: 1
      File section: 1
      Owner: root
      Client host: x4440a
      Backup level: 0
      S/w compression: no
      Archive created: Wed Apr 23 12:05:51 2014
      Encryption: off
      Dumping all files in /etc
      Backup complete on Wed Apr 23 2014 at 12:06:03
      Backup statistics:
      status 0
      devices IBM4_0_0_1_1
      devices 1
      volumes mf_2min-000025
      voltags LEV018
      file 1
      host x4440a
      encryption off
      start_time Wed Apr 23 2014 at 12:05:51 (1398276351)
      end_time Wed Apr 23 2014 at 12:06:06 (1398276366)
      backup_time Wed Apr 23 2014 at 12:05:51 (1398276351)
      entries_scanned 3373
      kbytes_scanned 40556
      entries_excluded 0
      entries_skipped 0
      mount_points_skipped 0
      files 2047
      directories 315
      hardlinks 0
      symlinks 1011
      sparse_files 0
      filesys_errors 0
      unknown_type 0
      file_kbytes 39264
      dev_kbytes 35977
      dev_iosecs 2
      dev_iorate 18.4 MB/S
      wrt_iosecs 15
      wrt_iorate 2.5 MB/S
      physical_blks_written 1102
      write_errors 0
      physical_blks_read 2
      read_errors 0
      error_rate 0%
      path /etc completed, status 0
    [root@x4440a backup]# obtool lsdev -lvg
    SL500:
         Device type:            library (ACSLS)
         In service:             yes
         Debug mode:             no
         Barcode reader:         yes
         Barcodes required:      yes
         Unload required:        yes
         Ejection type:          auto
         Min writable volumes:   0
         UUID:                   e0b58224-a1a4-1031-8c0f-002128001bbe
         Attachment 1:
             Host:               x4440a
             ACSLS server:       v215f
             ACSLS port:         0
             ACS id:             0
             ACSLS access id:    acsss
         Reservation 1:
             Component:          obacslibd
             Host:               x4440a
             Process:            32195
         Element counts / addresses:
            10 mte: 1 - 10
           281 se : 1 - 281
             1 iee: 1
             1 dte: 1
         Moves:
            From mte, to: mte 0   se 0   iee 0   dte 0
            From  se, to: mte 0   se 0   iee 1   dte 1
            From iee, to: mte 0   se 0   iee 0   dte 0
            From dte, to: mte 0   se 1   iee 0   dte 0
         Ok_ops: move=1, reserve=1 sense_dev=1, sense_ele=0, unload_any=1, sense_dev_range=0
         State of barcode reader: enabled
    IBM4_0_0_1_1:
         Device type:            tape (ACSLS)
         In service:             yes
         Library:                SL500
         LSM:                    0
         Panel:                  1
         Drive:                  1
         Automount:              yes
         Error rate:             8
         Query frequency:        131072KB (134217728 bytes) (from driver)
         Debug mode:             no
         Blocking factor:        (default)
         Max blocking factor:    (default)
         Current tape:           [unknown]
         Drive usage:            14 minutes, 58 seconds
         UUID:                   179eb954-a1a5-1031-8c0f-002128001bbe
         Attachment 1:
             Host:               x4440a
             Raw device:         /dev/sg18
         Connection type:        SCSI
         Inquiry data:
             Vendor:             IBM
             Product:            ULTRIUM-TD4
             Firmware:           C7Q0
             Serial number:      1310127325
         Tape state:             offline
         Hardware compression:   on
         Last read was:          uncompressed
         Hardware encryption:    available
         Maximum block size:     2097152
    IBM5_0_0_2_1:
         Device type:            tape (ACSLS)
         In service:             yes
         Library:                SL500
         LSM:                    0
         Panel:                  2
         Drive:                  1
         Automount:              yes
         Error rate:             8
         Query frequency:        131072KB (134217728 bytes) (from driver)
         Debug mode:             no
         Blocking factor:        (default)
         Max blocking factor:    (default)
         Current tape:           [unknown]
         Drive usage:            [not set]
         UUID:                   7498ff66-a1a5-1031-8c0f-002128001bbe
         Attachment 1:
             Host:               x4440a
             Raw device:         /dev/sg16
         Connection type:        SCSI
         Inquiry data:
             Vendor:             IBM
             Product:            ULTRIUM-TD5
             Firmware:           D8D4
             Serial number:      1168002114
         Tape state:             offline
         Hardware compression:   on
         Last read was:          uncompressed
         Hardware encryption:    available
         Maximum block size:     2097152
    HP6_0_0_3_1:
         Device type:            tape (ACSLS)
         In service:             yes
         Library:                SL500
         LSM:                    0
         Panel:                  3
         Drive:                  1
         Automount:              yes
         Error rate:             8
         Query frequency:        131072KB (134217728 bytes) (from driver)
         Debug mode:             no
         Blocking factor:        (default)
         Max blocking factor:    (default)
         Current tape:           [unknown]
         Drive usage:            [not set]
         UUID:                   cd20d3fc-a1a5-1031-8c0f-002128001bbe
         Attachment 1:
             Host:               x4440a
             Raw device:         /dev/sg21
         Connection type:        SCSI
         Inquiry data:
             Vendor:             HP
             Product:            Ultrium 6-SCSI
             Firmware:           J39S
             Serial number:      HU1233PPNN
         Tape state:             offline
         Hardware compression:   on
         Last read was:          uncompressed
         Hardware encryption:    available
         Maximum block size:     2097152
    IBM5_0_0_1_2:
         Device type:            tape (ACSLS)
         In service:             yes
         Library:                SL500
         LSM:                    0
         Panel:                  1
         Drive:                  2
         Automount:              yes
         Error rate:             8
         Query frequency:        131072KB (134217728 bytes) (from driver)
         Debug mode:             no
         Blocking factor:        (default)
         Max blocking factor:    (default)
         Current tape:           [unknown]
         Drive usage:            [not set]
         UUID:                   5b6cf420-a1a5-1031-8c0f-002128001bbe
         Attachment 1:
             Host:               x4440a
             Raw device:         /dev/sg15
         Connection type:        SCSI
         Inquiry data:
             Vendor:             IBM
             Product:            ULTRIUM-TD5
             Firmware:           D8D4
             Serial number:      1068002447
         Tape state:             offline
         Hardware compression:   on
         Last read was:          uncompressed
         Hardware encryption:    available
         Maximum block size:     2097152
    HP4_0_0_2_2:
         Device type:            tape (ACSLS)
         In service:             yes
         Library:                SL500
         LSM:                    0
         Panel:                  2
         Drive:                  2
         Automount:              yes
         Error rate:             8
         Query frequency:        131072KB (134217728 bytes) (from driver)
         Debug mode:             no
         Blocking factor:        (default)
         Max blocking factor:    (default)
         Current tape:           [unknown]
         Drive usage:            [not set]
         UUID:                   8bd3659a-a1a5-1031-8c0f-002128001bbe
         Attachment 1:
             Host:               x4440a
             Raw device:         /dev/sg13
         Connection type:        SCSI
         Inquiry data:
             Vendor:             HP
             Product:            Ultrium 4-SCSI
             Firmware:           H64S
             Serial number:      HU1803168E
         Tape state:             offline
         Hardware compression:   on
         Last read was:          uncompressed
         Hardware encryption:    not available
         Maximum block size:     2097152
    HP5_0_0_2_3:
         Device type:            tape (ACSLS)
         In service:             yes
         Library:                SL500
         LSM:                    0
         Panel:                  2
         Drive:                  3
         Automount:              yes
         Error rate:             8
         Query frequency:        131072KB (134217728 bytes) (from driver)
         Debug mode:             no
         Blocking factor:        (default)
         Max blocking factor:    (default)
         Current tape:           [unknown]
         Drive usage:            [not set]
         UUID:                   9ee7dbd4-a1a5-1031-8c0f-002128001bbe
         Attachment 1:
             Host:               x4440a
             Raw device:         /dev/sg23
         Connection type:        SCSI
         Inquiry data:
             Vendor:             HP
             Product:            Ultrium 5-SCSI
             Firmware:           I67S
             Serial number:      HU19477NFE
         Tape state:             offline
         Hardware compression:   on
         Last read was:          uncompressed
         Hardware encryption:    not available
         Maximum block size:     2097152
    HP5_0_0_2_4:
         Device type:            tape (ACSLS)
         In service:             yes
         Library:                SL500
         LSM:                    0
         Panel:                  2
         Drive:                  4
         Automount:              yes
         Error rate:             8
         Query frequency:        131072KB (134217728 bytes) (from driver)
         Debug mode:             no
         Blocking factor:        (default)
         Max blocking factor:    (default)
         Current tape:           [unknown]
         Drive usage:            [not set]
         UUID:                   b45b889e-a1a5-1031-8c0f-002128001bbe
         Attachment 1:
             Host:               x4440a
             Raw device:         /dev/sg24
         Connection type:        SCSI
         Inquiry data:
             Vendor:             HP
             Product:            Ultrium 5-SCSI
             Firmware:           I67S
             Serial number:      HU19477NBF
         Tape state:             offline
         Hardware compression:   on
         Last read was:          uncompressed
         Hardware encryption:    available
         Maximum block size:     2097152
    [root@x4440a backup]#
    [root@x4440a backup]# obtool lsvol -L SL500 -l
    Inventory of library SL500:
         in    1:             barcode F50216, oid 100
         in    2:             barcode I50116, oid 101
         in    3:             barcode LEV008, oid 102, mediainfo hw encryptable
         in    4:             barcode LEV010, oid 103, mediainfo hw encryptable
         in    5:             barcode LEV017, oid 104, mediainfo hw encryptable
         in    6:             volume mf_2min-000025, barcode LEV018, oid 155, 781232128 kb remaining, expired, mediainfo hw encryptable
         in    7:             barcode LEV049, oid 106
         in    8:             barcode LEV058, oid 107
         in    9:             barcode PQ4196, oid 108
         in    10:            barcode PQ4883, oid 109
         in    11:            barcode S50282, oid 110
         in    12:            barcode S50290, oid 111
         in    13:            barcode S50291, oid 112
         in    14:            barcode S50292, oid 113
         in    15:            barcode S50300, oid 114
         in    16:            barcode S60111, oid 115
         in    17:            barcode S60113, oid 116
         in    18:            barcode SF6410, oid 117
         in    19:            barcode SF6411, oid 118
         in    20:            barcode SF6412, oid 119
         in    21:            barcode SF6413, oid 120
         in    22:            barcode SF6414, oid 121
         in    23:            barcode SF6416, oid 122
         in    24:            barcode SF6417, oid 123
         in    25:            barcode SF6418, oid 124
         in    26:            barcode SF6419, oid 125
         in    27:            vacant
         in    28:            vacant
         in    29:            vacant
         in    30:            vacant
         in    31:            vacant
         in    274:           vacant
         in    275:           vacant
         in    276:           vacant
         in    277:           vacant
         in    278:           vacant
         in    279:           vacant
         in    280:           vacant
         in    281:           vacant
         in    iee:           vacant
         in    dte:           vacant
    [root@x4440a backup]#

    Rich
    Thanks for your response.
    ACSLS is part of the configuration requirements I need to have in this OBS environment.
    I'm going to re install OBS just to see if anything changes.
    Thanks again.
    Update:
    When configuring devices in OSB that are ACSLS in nature it is a requirement to restart the obacslibd after mkdev or certain chdev commands are preformed.
    After the daemon was restarted I was able to use the attached tape drives.

  • Why do I get a boot drive not found error only when laptop lid has been closed?

    I've got a HP Mini 210 P/Number: VX818EA with Windows 7 Starter.
    It works fine when turning on after shutdown, but when I've put it to sleep by closing the lid it won't 'wake up', and I get a blank screen. On restarting the computer I get a 'boot drive not found' error, (3F0) which can be resolved by following the steps on this page: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443463&tmp_task=solveCategory&lc=en&dlc=en&cc...
    I've run disk check etc as suggested on that link, no errors are found, but nothing seems to resolve the problem more than temporarily. Seems odd that this only happens if I close the lid (sleep mode with the lid up is fine, doesn't crash the computer).
    Can anyone advise?
    Thanks

    Hello,
     Very strange, can you go to BIOS and reset the setting " By Default " ?. How did you check the disk ?
    This is an unusual probleme Hp Mini 210 . And notice me after your reset the bios settings.

  • Error initializing ejb-module; Exception javac.exe not found under

    Dear all,
    I got followings error after i had tried to doing some lab.I had checked the folder "C:\Program Files\Oracle\jre\1.3.1" exists but missed but missing javac.exe. Could anyone can advice me what is going wrong?
    04/04/14 16:44:20 Auto-deploying - web/WEB-INF/classes (No previous deployment found)...
    04/04/14 16:44:20 Error instantiating application 'lab04' at file:/C:/share/oc4j
    /labs/lab04/: Error initializing ejb-module; Exception javac.exe not found under
    C:\Program Files\Oracle\jre\1.3.1, please use a valid jdk or specify the locati
    on of your java compiler in server.xml using the <java-compiler .../> tag
    Thanks in advance!
    Best Regards,
    Chris CHIU

    Dear Chris,
    The answer lies in the error message you got, namely:
    please use a valid jdkAccording to your post, you don't have a JDK, you only have a JRE. The javac compiler is part of the JDK, it is not part of the JRE.
    You can download the JDK from the J2SE Download Web page. Look for the Download J2SE SDK link -- do not choose the Download J2SE JRE link!
    Good Luck,
    Avi.

  • Aurbuild saying "package not found under /var/tmp/aurbuild/pkgbuilds"

    Hello everyone
    I am using aurbuild for installing aur packages. Since some time now, I keep getting the error message:
    package not found under /var/tmp/aurbuild/pkgbuilds
    For example the exact message is:
    lib32-pciutils not found under /var/tmp/aurbuild/pkgbuilds
    No result found
    What can I do about that?
    Thanks in advance
    b1

    Please see our Forum Etiquette regarding bumping b1: https://wiki.archlinux.org/index.php/Fo … te#Bumping
    Have you tried if the same thing happens with other packages and AUR-builders?

  • After downloading osx 10.9.2 when i open my logic pro 9 and begin to audition loops that came with lp9 i get a message that says "audio device has been removed  and then a second message the " select driver not found(-10202). my interface is a apogee duet

    after downloading osx 10.9.2 when i open my logic pro 9 and begin to audition loops that came with lp9 i get a message that says "audio device has been removed  and then a second message the " select driver not found(-10202). my interface is a apogee duet. Can anyone provide a solution to this problem. Thanks

    YES!!! YES!!! YES!!!
    I got it!!! Yes!!!
    Guys, I've solved my problem about that error -10202 (Selected driver not found).
    I have installed in my Mac Pro (OS X 10.5.8) a document with an extension ".rsrc" to correct the position of the accents in my keyboard, like acute accent, tilde and circumflex.
    That file is called "U.S. - International.rsrc" and it's stored in the following path:
    "Macintosh HD/Library/Keyboard Layouts"
    So, when it's properly installed, I can choose 2 country flags on the right side of the menu bar (U.S. - International and Brazilian).
    That's the clue!
    When I pick up "U.S. - International", my keyboard works fine with the accents, >>>BUT<<< Logic Pro 9 doesn't recognize my audio driver; and when I pick up "Brazilian", my keyboard doesn't work with the accents exactly as it shows me on each key, BUT Logic Pro 9 DOES recognize my audio driver.
    So, when I want to write anything out, I will pick up the "US - International" and when I want to work on the Logic Pro 9, I will pick up "Brazilian".
    I hope I can help all of you.
    Regards,
    Renato Veiga.

Maybe you are looking for

  • How to search for music already on my iPhone

    In iOS 6 I could swipe to the left on my Home Screen and search for any file on my phone weather it be music, video, or document. I have over 300 songs on my phone and when I want to play something for someone it now takes a long time to go through a

  • Search Feature not showing up

    Hi, i have a video ipod with software version 1.2.1 installed... and i dont have the search feature ... i though that search was availible for all ipods. Is it not, or am i doing something wrong. When i open iTunes, it shows that i cannot update my i

  • Itunes Processes an album but it doesn't show up.

    Hope someone can help me. I have a couple of albums in my computer and every time I try to add them to my itunes, it says its processing it but when it finishes I cant find the albums anywhere in itunes. The songs are all mp3s and the albums are no d

  • Support for older Sony camcorder

    Hello. I have iMovie '09 on my new iMac. I just acquired an older Sony DCR-VX1000 camcorder that uses Mini DV tapes. I need to invest in new batteries, a charger, a DV cable, and a repair before actually using this camcorder but I wanted to know befo

  • Assert keyword?

    I'm trying to implement some code that I found in a book, and they use "assert", but when I try to compile with NetBeans 3.6, I get a warning that says, "warning, as of Java 1.4, assert is a keyword, and may not used as an identifiier" here's an exam