Satellite 2100 CDT: Windows needs very long to boot up
Satellite 2100 CDT. Gradually the time of Windows loading increasing. Now it reach about five minutes! I didn't install new programms, chesk for viruses. Could anybody help?
Hi
From time to time its advisable to install the Windows OS again.
The fact is that after a longer usage of the Windows the registry will be polluted.
Simply said, the registry entries are corrupt.
Well, this happens because of the installation and reinstallation of software, etc
The other possibility could be a corrupted HDD. Maybe some damage sectors.
In this case a usage of HDD regenerator could increases the HDD performance and makes the booting time shorter.
Also a virus or malware, connected 3rd hardware devices or enabled WLan could has a bad influence on the notebook booting
Similar Messages
-
Satellite Pro L630 need very long to boot up
Takes forever to boot up, cleared start up menu, no change,
Seem to coincide with display monitor addition. Using Toshiba DynadockIt would be really interesting to know if the same happen without Dynadock.
Do you use original Toshiba preinstalled operating system?
Which antivirus application do you use?
After OS start maybe preinstalled antivirus application search for updates. Microsoft updates can also be active in he background. This can slow down preinstalled OS and maybe several minutes you cannot start to use preinstalled applications. -
Mac Pro suddenly takes very long to boot and won't shut down... just spins
My Mac started taking very long to boot up... maybe 10 minutes before the icon bar becomes available.
Also, it won't shut down... it just spins. I've waited 30 minutes with no results.
Any help would be greatly appreciatedCBuss,
The long boot cycle points to preference corruption. And not the kind that can be corrected with re-boots etc., Check Hard Drive>Library>Preferences to see if the listings make "visual" sense. If there are a lot of letters with circles over them and numbers interspersed, you are skating out on thin ice.
Back up everything now, then do a clean install of your current OS. Do not to an "archive". That will probably archive the corruption as well. Go up to Snow Leopard if you can. Add your data back manually as well. If you keep going with these lingering start ups, you will shortly get the "?" at startup instead of the Apple/ Chime and the long, expensive, recovery (by somebody else) will begin.
As for the 'shut down" issue.. I am still in the dark. Something is still "running" and canceling the shut down cycle.
Cheers
Toby -
IMAC takes very long to boot and and shut down.
My iMAC 21" takes very long (15-20 mts) to boot up and become responsive. It also takes More than 5 mts to shut down. The HW test and disk utility do not report any issue. I have Erased the disk and re-installed OS X 10.9.2 two times. On the second re-install, I deliberately did not restore the backup from the time machine. It works well after it settles down. I changed the mouse and have cheked the Apple wireless keyboard.
The problems began after the last security update to the best of my recollection. Since there does not appear to be any HW issue and I have re-installed the software, I am unable to determine what else I can do to resolve the issue.Hello. Thank you for responding to my message.
I have shut down the system at 8.28am local time (took about 2 mts which is not bad). I then restarted and it took more than 10 mts to reach the login prompt. After login, it took several more minutes until all the icons were displayed at the bottom. After clicking on Safari and reaching the top hits pages also took an unresonable amount of time considering it is a quad core MAC and I am on a fibre internet connection. (Other computers at home respond quickly). I have to add that I am experiencing intermittent performane issues even when the MAC settles down after the long startup time. i.e. get to see the coloured spinning wheel several times.
I have tried my best to cut down the log size but found many unique lines as the boot took so long. So, apologies for the length of the log. The System diagnostics section in the Console app is blank with no reports at all.
2/5/14 8:28:23.982 am com.apple.launchd.peruser.501[179]: (com.apple.PackageKit.InstallStatus) Throttling respawn: Will start in 5 seconds
2/5/14 8:28:25.782 am WindowServer[83]: disable_update_timeout: UI updates were forcibly disabled by application "loginwindow" for over 1.00 seconds. Server has re-enabled them.
2/5/14 8:28:26.416 am WindowServer[83]: common_reenable_update: UI updates were finally reenabled by application "loginwindow" after 1.63 seconds (server forcibly re-enabled them after 1.00 seconds)
2/5/14 8:28:26.424 am WindowServer[83]: CGXGetConnectionProperty: Invalid connection 51715
2/5/14 8:28:26.431 am com.apple.launchd[1]: (com.apple.ShareKitHelper[252]) Exited: Killed: 9
2/5/14 8:28:26.431 am com.apple.launchd.peruser.501[179]: (com.apple.AirPlayUIAgent[219]) Exited: Killed: 9
2/5/14 8:28:26.437 am com.apple.launchd.peruser.501[179]: ([0x0-0x17017].com.apple.AppleSpell[310]) Exited: Killed: 9
2/5/14 8:28:32.476 am sessionlogoutd[379]: sessionlogoutd Launched
2/5/14 8:28:32.483 am sessionlogoutd[379]: DEAD_PROCESS: 41 console
2/5/14 8:28:32.504 am airportd[63]: _doAutoJoin: Already associated to “Star-7789”. Bailing on auto-join.
2/5/14 8:28:47.258 am shutdown[380]: halt by _coreaudiod:
2/5/14 8:28:47.000 am kernel[0]: Kext loading now disabled.
2/5/14 8:28:47.000 am kernel[0]: Kext unloading now disabled.
2/5/14 8:28:47.000 am kernel[0]: Kext autounloading now disabled.
2/5/14 8:28:47.000 am kernel[0]: Kernel requests now disabled.
2/5/14 8:28:47.258 am shutdown[380]: SHUTDOWN_TIME: 1398990527 258440
2/5/14 8:30:30.000 am bootlog[0]: BOOT_TIME 1398990630 0
2/5/14 8:31:56.000 am syslogd[19]: Configuration Notice:
ASL Module "com.apple.appstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
2/5/14 8:31:56.000 am syslogd[19]: Configuration Notice:
ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
2/5/14 8:31:56.000 am syslogd[19]: Configuration Notice:
ASL Module "com.apple.authd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
2/5/14 8:31:56.000 am syslogd[19]: Configuration Notice:
ASL Module "com.apple.performance" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
2/5/14 8:31:56.000 am syslogd[19]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
2/5/14 8:31:56.000 am syslogd[19]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
2/5/14 8:31:56.000 am kernel[0]: Longterm timer threshold: 1000 ms
2/5/14 8:31:56.000 am kernel[0]: PMAP: PCID enabled
2/5/14 8:31:56.000 am kernel[0]: PMAP: Supervisor Mode Execute Protection enabled
2/5/14 8:31:56.000 am kernel[0]: Darwin Kernel Version 13.1.0: Wed Apr 2 23:52:02 PDT 2014; root:xnu-2422.92.1~2/RELEASE_X86_64
2/5/14 8:31:56.000 am kernel[0]: vm_page_bootstrap: 1861432 free pages and 219336 wired pages
2/5/14 8:31:56.000 am kernel[0]: kext submap [0xffffff7f807a5000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff80007a5000]
2/5/14 8:31:56.000 am kernel[0]: zone leak detection enabled
2/5/14 8:31:56.000 am kernel[0]: "vm_compressor_mode" is 4
2/5/14 8:31:56.000 am kernel[0]: standard timeslicing quantum is 10000 us
2/5/14 8:31:56.000 am kernel[0]: standard background quantum is 2500 us
2/5/14 8:31:56.000 am kernel[0]: mig_table_max_displ = 74
2/5/14 8:31:56.000 am kernel[0]: TSC Deadline Timer supported and enabled
2/5/14 8:31:56.000 am kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
2/5/14 8:31:56.000 am kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
2/5/14 8:31:56.000 am kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
2/5/14 8:31:56.000 am kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
2/5/14 8:31:56.000 am kernel[0]: calling mpo_policy_init for TMSafetyNet
2/5/14 8:31:56.000 am kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
2/5/14 8:31:56.000 am kernel[0]: calling mpo_policy_init for Sandbox
2/5/14 8:31:56.000 am kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
2/5/14 8:31:56.000 am kernel[0]: calling mpo_policy_init for Quarantine
2/5/14 8:31:56.000 am kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
2/5/14 8:31:56.000 am kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
2/5/14 8:31:56.000 am kernel[0]: The Regents of the University of California. All rights reserved.
2/5/14 8:31:56.000 am kernel[0]: MAC Framework successfully initialized
2/5/14 8:31:56.000 am kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
2/5/14 8:31:56.000 am kernel[0]: AppleKeyStore starting (BUILT: Jan 16 2014 20:19:00)
2/5/14 8:31:56.000 am kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
2/5/14 8:31:56.000 am kernel[0]: ACPI: sleep states S3 S4 S5
2/5/14 8:31:56.000 am kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 3467
2/5/14 8:31:56.000 am kernel[0]: AppleIntelCPUPowerManagement: (built 19:46:50 Jan 16 2014) initialization complete
2/5/14 8:31:56.000 am kernel[0]: pci (build 20:00:24 Jan 16 2014), flags 0x63008, pfm64 (36 cpu) 0xf80000000, 0x80000000
2/5/14 8:31:56.000 am kernel[0]: [ PCI configuration begin ]
2/5/14 8:31:56.000 am kernel[0]: console relocated to 0xf80020000
2/5/14 8:31:56.000 am kernel[0]: [ PCI configuration end, bridges 13, devices 16 ]
2/5/14 8:31:56.000 am kernel[0]: AppleThunderboltNHIType2::setupPowerSavings - GPE based runtime power management
2/5/14 8:31:56.000 am kernel[0]: mcache: 4 CPU(s), 64 bytes CPU cache line size
2/5/14 8:31:56.000 am kernel[0]: mbinit: done [96 MB total pool size, (64/32) split]
2/5/14 8:31:56.000 am kernel[0]: Pthread support ABORTS when sync kernel primitives misused
2/5/14 8:31:56.000 am kernel[0]: rooting via boot-uuid from /chosen: BAEA055B-14AD-3566-B5E1-7009F2439E7E
2/5/14 8:31:56.000 am kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
2/5/14 8:31:56.000 am kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
2/5/14 8:31:56.000 am kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
2/5/14 8:31:56.000 am kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
2/5/14 8:31:56.000 am kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
2/5/14 8:31:56.000 am kernel[0]: AppleIntelCPUPowerManagementClient: ready
2/5/14 8:31:56.000 am kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/APPLE HDD ST1000LM024 Media/IOGUIDPartitionScheme/Customer@2
2/5/14 8:31:56.000 am kernel[0]: BSD root: disk0s2, major 1, minor 3
2/5/14 8:31:56.000 am kernel[0]: BTCOEXIST off
2/5/14 8:31:56.000 am kernel[0]: BRCM tunables:
2/5/14 8:31:56.000 am kernel[0]: pullmode[1] txringsize[ 256] txsendqsize[1024] reapmin[ 32] reapcount[ 128]
2/5/14 8:31:56.000 am kernel[0]: Thunderbolt Self-Reset Count = 0xedefbe00
2/5/14 8:31:56.000 am kernel[0]: IOThunderboltSwitch<0xffffff8038947200>(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
2/5/14 8:31:56.000 am kernel[0]: IOThunderboltSwitch<0xffffff8038947200>(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
2/5/14 8:31:56.000 am kernel[0]: hfs: mounted Macintosh HD on device root_device
2/5/14 8:31:56.000 am kernel[0]: pci pause: SDXC
2/5/14 8:30:55.844 am com.apple.launchd[1]: *** launchd[1] has started up. ***
2/5/14 8:30:55.844 am com.apple.launchd[1]: *** Shutdown logging is enabled. ***
2/5/14 8:31:54.439 am com.apple.SecurityServer[14]: Session 100000 created
2/5/14 8:31:56.000 am kernel[0]: Waiting for DSMOS...
2/5/14 8:31:56.589 am hidd[48]: void __IOHIDPlugInLoadBundles(): Loaded 0 HID plugins
2/5/14 8:31:56.590 am hidd[48]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
2/5/14 8:31:56.000 am kernel[0]: VM Swap Subsystem is ON
2/5/14 8:31:59.855 am distnoted[20]: assertion failed: 13C1021: liblaunch.dylib + 25164 [38D1AB2C-A476-385F-8EA8-7AB604CA1F89]: 0x25
2/5/14 8:31:59.000 am kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
2/5/14 8:31:59.000 am kernel[0]: IO80211Interface::efiNVRAMPublished():
2/5/14 8:32:01.000 am kernel[0]: IOBluetoothUSBDFU::probe
2/5/14 8:32:01.000 am kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x828B FirmwareVersion - 0x0079
2/5/14 8:32:01.000 am kernel[0]: **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0xb400 ****
2/5/14 8:32:01.000 am kernel[0]: **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- 0xb400 ****
2/5/14 8:32:01.000 am kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key LsNM (kSMCKeyNotFound)
2/5/14 8:32:01.000 am kernel[0]: SMC::smcReadKeyAction ERROR LsNM kSMCKeyNotFound(0x84) fKeyHashTable=0x0
2/5/14 8:32:01.000 am kernel[0]: SMC::smcGetLightshowVers ERROR: smcReadKey LsNM failed (kSMCKeyNotFound)
2/5/14 8:32:01.000 am kernel[0]: SMC::smcPublishLightshowVersion ERROR: smcGetLightshowVers failed (kSMCKeyNotFound)
2/5/14 8:32:01.000 am kernel[0]: SMC::smcInitHelper ERROR: smcPublishLightshowVersion failed (kSMCKeyNotFound)
2/5/14 8:32:01.000 am kernel[0]: Previous Shutdown Cause: 5
2/5/14 8:32:01.000 am kernel[0]: NVDAStartup: Official
2/5/14 8:32:01.000 am kernel[0]: init
2/5/14 8:32:01.000 am kernel[0]: probe
2/5/14 8:32:01.000 am kernel[0]: start
2/5/14 8:32:01.000 am kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0xb400
2/5/14 8:32:01.000 am kernel[0]: [IOBluetoothHCIController][start] -- completed
2/5/14 8:32:01.000 am kernel[0]: NVDAGK100HAL loaded and registered
2/5/14 8:32:01.000 am kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
2/5/14 8:32:01.000 am kernel[0]: **** [IOBluetoothHCIController][protectedBluetoothHCIControllerTransportShowsUp] -- Connected to the transport successfully -- 0xab00 -- 0x1800 -- 0xb400 ****
2/5/14 8:32:01.000 am kernel[0]: DSMOS has arrived
2/5/14 8:32:01.965 am com.apple.usbmuxd[26]: usbmuxd-327.4 on Feb 12 2014 at 14:54:33, running 64 bit
2/5/14 8:32:02.000 am kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
2/5/14 8:32:04.345 am configd[17]: dhcp_arp_router: en1 SSID unavailable
2/5/14 8:32:04.354 am configd[17]: setting hostname to "Johns-iMac.local"
2/5/14 8:32:04.357 am configd[17]: network changed.
2/5/14 8:32:11.163 am stackshot[29]: Timed out waiting for IOKit to finish matching.
2/5/14 8:32:21.000 am kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
2/5/14 8:32:21.654 am com.apple.SecurityServer[14]: Entering service
2/5/14 8:32:24.752 am loginwindow[43]: Login Window Application Started
2/5/14 8:32:24.752 am awacsd[60]: Starting awacsd connectivity_executables-97 (Aug 24 2013 23:49:23)
2/5/14 8:32:24.758 am awacsd[60]: InnerStore CopyAllZones: no info in Dynamic Store
2/5/14 8:32:24.760 am digest-service[65]: label: default
2/5/14 8:32:24.760 am digest-service[65]: dbname: od:/Local/Default
2/5/14 8:32:24.760 am digest-service[65]: mkey_file: /var/db/krb5kdc/m-key
2/5/14 8:32:24.760 am digest-service[65]: acl_file: /var/db/krb5kdc/kadmind.acl
2/5/14 8:32:24.762 am digest-service[65]: digest-request: uid=0
2/5/14 8:32:24.768 am UserEventAgent[11]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
2/5/14 8:32:24.775 am mDNSResponder[40]: mDNSResponder mDNSResponder-522.90.2 (Nov 3 2013 18:51:09) starting OSXVers 13
2/5/14 8:32:24.784 am UserEventAgent[11]: Captive: CNPluginHandler en1: Inactive
2/5/14 8:32:24.803 am digest-service[65]: digest-request: netr probe 0
2/5/14 8:32:24.803 am digest-service[65]: digest-request: init request
2/5/14 8:32:24.810 am digest-service[65]: digest-request: init return domain: BUILTIN server: JohnS-IMAC indomain was: <NULL>
2/5/14 8:32:24.844 am mDNSResponder[40]: D2D_IPC: Loaded
2/5/14 8:32:24.844 am mDNSResponder[40]: D2DInitialize succeeded
2/5/14 8:32:24.847 am mDNSResponder[40]: 4: Listening for incoming Unix Domain Socket client requests
2/5/14 8:32:24.864 am systemkeychain[83]: done file: /var/run/systemkeychaincheck.done
2/5/14 8:32:39.821 am awacsd[60]: Exiting
2/5/14 8:32:59.919 am configd[17]: InterfaceNamer: timed out waiting for IOKit to quiesce
2/5/14 8:32:59.919 am configd[17]: Busy services :
2/5/14 8:32:59.919 am configd[17]: iMac13,1 [1, 150166 ms]
2/5/14 8:32:59.919 am configd[17]: iMac13,1/AppleACPIPlatformExpert [1, 61878 ms]
2/5/14 8:32:59.919 am configd[17]: iMac13,1/AppleACPIPlatformExpert/CPU0@0 [1, 58697 ms]
2/5/14 8:32:59.920 am configd[17]: iMac13,1/AppleACPIPlatformExpert/CPU0@0/AppleACPICPU [1, 58692 ms]
2/5/14 8:32:59.920 am configd[17]: iMac13,1/AppleACPIPlatformExpert/CPU0@0/AppleACPICPU/X86PlatformPlugin [!registered, !matched, 1, 58622 ms]
2/5/14 8:32:59.000 am kernel[0]: en2: promiscuous mode enable succeeded
2/5/14 8:32:59.000 am kernel[0]: en3: promiscuous mode enable succeeded
2/5/14 8:33:07.391 am airportd[64]: airportdProcessDLILEvent: en1 attached (up)
2/5/14 8:33:07.000 am kernel[0]: createVirtIf(): ifRole = 1
2/5/14 8:33:07.000 am kernel[0]: in func createVirtualInterface ifRole = 1
2/5/14 8:33:07.000 am kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1
2/5/14 8:33:07.000 am kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
2/5/14 8:33:07.000 am kernel[0]: Created virtif 0xffffff803932dc00 p2p0
2/5/14 8:33:07.812 am configd[17]: network changed: DNS*
2/5/14 8:33:19.050 am apsd[62]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
2/5/14 8:33:23.440 am networkd[102]: networkd.102 built Aug 24 2013 22:08:46
2/5/14 8:33:24.805 am mds[39]: (Normal) FMW: FMW 0 0
2/5/14 8:33:29.103 am apsd[62]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
2/5/14 8:33:35.862 am warmd[25]: [warmctl_evt_timer_bc_activation_timeout:287] BC activation bcstop timer fired!
2/5/14 8:33:36.000 am kernel[0]: IOPPF: AppleIntelCPUPowerManagement mode
2/5/14 8:33:36.000 am kernel[0]: [AGPM Controller] build GPUDict by Vendor10deDevice0fd5
2/5/14 8:34:09.979 am _networkd[116]: /usr/libexec/ntpd-wrapper: scutil key State:/Network/Global/DNS not present after 30 seconds
2/5/14 8:34:14.131 am _networkd[119]: Unable to resolve hostname(s)
2/5/14 8:34:14.354 am ntpd[109]: proto: precision = 1.000 usec
2/5/14 8:34:15.055 am WindowServer[84]: Server is starting up
2/5/14 8:34:15.117 am WindowServer[84]: Session 256 retained (2 references)
2/5/14 8:34:15.117 am WindowServer[84]: Session 256 released (1 references)
2/5/14 8:34:15.127 am WindowServer[84]: Session 256 retained (2 references)
2/5/14 8:34:15.128 am WindowServer[84]: init_page_flip: page flip mode is on
2/5/14 8:34:15.610 am locationd[45]: NBB-Could not get UDID for stable refill timing, falling back on random
2/5/14 8:34:15.612 am locationd[45]: could not create intermediate property list - Cannot parse a NULL or zero-length data
2/5/14 8:34:15.612 am locationd[45]: could not deserialize property list from /var/db/locationd/clients.plist
2/5/14 8:34:15.676 am WindowServer[84]: Found 51 modes for display 0x00000000 [27, 24]
2/5/14 8:34:16.000 am kernel[0]: en1: 802.11d country code set to 'SG'.
2/5/14 8:34:16.000 am kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
2/5/14 8:34:17.000 am kernel[0]: MacAuthEvent en1 Auth result for: 98:2c:be:74:e5:be MAC AUTH succeeded
2/5/14 8:34:17.000 am kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
2/5/14 8:34:17.000 am kernel[0]: AirPort: Link Up on en1
2/5/14 8:34:17.000 am kernel[0]: en1: BSSID changed to 98:2c:be:74:e5:be
2/5/14 8:34:17.050 am WindowServer[84]: Found 1 modes for display 0x00000000 [1, 0]
2/5/14 8:34:17.053 am WindowServer[84]: Found 1 modes for display 0x00000000 [1, 0]
2/5/14 8:34:17.054 am WindowServer[84]: mux_initialize: Couldn't find any matches
2/5/14 8:34:17.055 am WindowServer[84]: Found 51 modes for display 0x00000000 [27, 24]
2/5/14 8:34:17.058 am WindowServer[84]: Found 1 modes for display 0x00000000 [1, 0]
2/5/14 8:34:17.058 am WindowServer[84]: Found 1 modes for display 0x00000000 [1, 0]
2/5/14 8:34:17.071 am locationd[45]: Location icon should now be in state 'Inactive'
2/5/14 8:34:17.000 am kernel[0]: AirPort: RSN handshake complete on en1
2/5/14 8:34:17.208 am WindowServer[84]: WSMachineUsesNewStyleMirroring: true
2/5/14 8:34:17.208 am WindowServer[84]: Display 0x04280480: GL mask 0x1; bounds (0, 0)[1920 x 1080], 51 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a012, S/N 0, Unit 0, Rotation 0
UUID 0x2838c3dda39478c14a5e57649bbc5643
2/5/14 8:34:17.209 am WindowServer[84]: Display 0x003f003f: GL mask 0x8; bounds (0, 0)[3840 x 2160], 2 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
2/5/14 8:34:17.209 am WindowServer[84]: Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
2/5/14 8:34:17.209 am WindowServer[84]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
2/5/14 8:34:17.209 am WindowServer[84]: WSSetWindowTransform: Singular matrix
2/5/14 8:34:17.209 am WindowServer[84]: WSSetWindowTransform: Singular matrix
2/5/14 8:34:17.000 am kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
2/5/14 8:34:19.342 am WindowServer[84]: Display 0x04280480: GL mask 0x1; bounds (0, 0)[1920 x 1080], 51 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a012, S/N 0, Unit 0, Rotation 0
UUID 0x2838c3dda39478c14a5e57649bbc5643
2/5/14 8:34:19.342 am WindowServer[84]: Display 0x003f003f: GL mask 0x8; bounds (2944, 0)[1 x 1], 2 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
2/5/14 8:34:19.342 am WindowServer[84]: Display 0x003f003e: GL mask 0x4; bounds (2945, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
2/5/14 8:34:19.342 am WindowServer[84]: Display 0x003f003d: GL mask 0x2; bounds (2946, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
2/5/14 8:34:19.343 am WindowServer[84]: CGXPerformInitialDisplayConfiguration
2/5/14 8:34:19.343 am WindowServer[84]: Display 0x04280480: Unit 0; Vendor 0x610 Model 0xa012 S/N 0 Dimensions 18.70 x 10.51; online enabled built-in, Bounds (0,0)[1920 x 1080], Rotation 0, Resolution 1
2/5/14 8:34:19.343 am WindowServer[84]: Display 0x003f003f: Unit 3; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2944,0)[1 x 1], Rotation 0, Resolution 1
2/5/14 8:34:19.343 am WindowServer[84]: Display 0x003f003e: Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2945,0)[1 x 1], Rotation 0, Resolution 1
2/5/14 8:34:19.343 am WindowServer[84]: Display 0x003f003d: Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2946,0)[1 x 1], Rotation 0, Resolution 1
2/5/14 8:34:31.835 am UserEventAgent[11]: Captive: [CNInfoNetworkActive:1655] en1: SSID 'Star-7789' making interface primary (protected network)
2/5/14 8:34:31.835 am configd[17]: network changed: DNS* Proxy
2/5/14 8:34:31.835 am UserEventAgent[11]: Captive: CNPluginHandler en1: Evaluating
2/5/14 8:34:31.835 am UserEventAgent[11]: Captive: en1: Probing 'Star-7789'
2/5/14 8:34:31.838 am configd[17]: network changed: v4(en1!:192.168.1.98) DNS+ Proxy+ SMB
2/5/14 8:34:32.937 am UserEventAgent[11]: Captive: CNPluginHandler en1: Authenticated
2/5/14 8:34:35.953 am configd[17]: setting hostname to
2/5/14 8:34:51.522 am digest-service[129]: label: default
2/5/14 8:34:51.522 am digest-service[129]: dbname: od:/Local/Default
2/5/14 8:34:51.522 am digest-service[129]: mkey_file: /var/db/krb5kdc/m-key
2/5/14 8:34:51.522 am digest-service[129]: acl_file: /var/db/krb5kdc/kadmind.acl
2/5/14 8:34:51.523 am digest-service[129]: digest-request: uid=0
2/5/14 8:34:51.525 am digest-service[129]: digest-request: netr probe 0
2/5/14 8:34:51.525 am digest-service[129]: digest-request: init request
2/5/14 8:34:51.528 am digest-service[129]: digest-request: init return domain: -IMAC server: -IMAC indomain was: <NULL>
2/5/14 8:34:52.906 am WindowServer[84]: GLCompositor: GL renderer id 0x01022727, GL mask 0x0000000f, accelerator 0x0000449b, unit 0, caps QEX|MIPMAP, vram 512 MB
2/5/14 8:34:52.940 am digest-service[129]: digest-request: uid=0
2/5/14 8:34:52.940 am digest-service[129]: digest-request: init request
2/5/14 8:34:52.943 am digest-service[129]: digest-request: init return domain: JohnS-IMAC server: JohnS-IMAC indomain was: <NULL>
2/5/14 8:34:52.991 am WindowServer[84]: GLCompositor: GL renderer id 0x01022727, GL mask 0x0000000f, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
2/5/14 8:34:52.991 am WindowServer[84]: GLCompositor enabled for tile size [256 x 256]
2/5/14 8:34:52.991 am WindowServer[84]: CGXGLInitMipMap: mip map mode is on
2/5/14 8:34:53.030 am WindowServer[84]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
2/5/14 8:34:53.031 am com.apple.launchd[1]: (com.apple.netbiosd[121]) Exited abnormally: Hangup: 1
2/5/14 8:34:53.063 am loginwindow[43]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
2/5/14 8:34:56.004 am WindowServer[84]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x04280480 device: 0x7fee2af174f0 isBackBuffered: 1 numComp: 3 numDisp: 3
2/5/14 8:34:56.004 am WindowServer[84]: _CGXGLDisplayContextForDisplayDevice: acquired display context (0x7fee2af174f0) - enabling OpenGL
2/5/14 8:34:57.999 am com.apple.launchd[1]: (com.apple.netbiosd[135]) Exited abnormally: Hangup: 1
2/5/14 8:34:57.999 am com.apple.launchd[1]: (com.apple.netbiosd) Throttling respawn: Will start in 6 seconds
2/5/14 8:35:23.873 am WindowServer[84]: Display 0x04280480: Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
2/5/14 8:35:24.617 am WindowServer[84]: Display 0x04280480: Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
2/5/14 8:35:24.624 am WindowServer[84]: Display 0x04280480: Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
2/5/14 8:35:25.802 am launchctl[142]: com.apple.findmymacmessenger: Already loaded
2/5/14 8:35:26.179 am airportd[64]: _doAutoJoin: Already associated to “Star-”. Bailing on auto-join.
2/5/14 8:35:26.420 am com.apple.SecurityServer[14]: Session 100005 created
2/5/14 8:35:26.438 am loginwindow[43]: Setting the initial value of the magsave brightness level 1
2/5/14 8:35:27.177 am loginwindow[43]: Login Window Started Security Agent
2/5/14 8:35:27.329 am UserEventAgent[144]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
2/5/14 8:35:27.697 am SecurityAgent[151]: This is the first run
2/5/14 8:35:27.697 am SecurityAgent[151]: MacBuddy was run = 0
2/5/14 8:35:32.787 am locationd[45]: locationd was started after an unclean shutdown
2/5/14 8:35:59.142 am SecurityAgent[151]: User info context values set for
2/5/14 8:36:17.705 am SecurityAgent[151]: Login Window login proceeding
2/5/14 8:36:20.463 am loginwindow[43]: Login Window - Returned from Security Agent
2/5/14 8:36:20.488 am loginwindow[43]: USER_PROCESS: 43 console
2/5/14 8:36:20.544 am airportd[64]: _doAutoJoin: Already associated to “Star-7789”. Bailing on auto-join.
2/5/14 8:36:20.000 am kernel[0]: AppleKeyStore:Sending lock change 0
2/5/14 8:36:20.704 am com.apple.launchd.peruser.501[171]: Background: Aqua: Registering new GUI session.
2/5/14 8:36:20.720 am com.apple.launchd.peruser.501[171]: (com.apple.EscrowSecurityAlert) Unknown key: seatbelt-profiles
2/5/14 8:36:20.720 am com.apple.launchd.peruser.501[171]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
2/5/14 8:36:20.723 am launchctl[173]: com.apple.pluginkit.pkd: Already loaded
2/5/14 8:36:20.723 am launchctl[173]: com.apple.sbd: Already loaded
2/5/14 8:36:20.730 am distnoted[175]: # distnote server agent absolute time: 351.096632167 civil time: Fri May 2 08:36:20 2014 pid: 175 uid: 501 root: no
2/5/14 8:36:21.191 am com.apple.audio.DriverHelper[187]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDRadeonX4000_AMDAccelDevice.
2/5/14 8:36:21.191 am com.apple.audio.DriverHelper[187]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDRadeonX4000_AMDAccelSharedUserClient.
2/5/14 8:36:21.191 am com.apple.audio.DriverHelper[187]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDSIVideoContext.
2/5/14 8:36:21.191 am com.apple.audio.DriverHelper[187]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class Gen6DVDContext.
2/5/14 8:36:21.191 am com.apple.audio.DriverHelper[187]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelDevice.
2/5/14 8:36:21.192 am com.apple.audio.DriverHelper[187]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelSharedUserClient.
2/5/14 8:36:21.192 am com.apple.audio.DriverHelper[187]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextMain.
2/5/14 8:36:21.192 am com.apple.audio.DriverHelper[187]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextMedia.
2/5/14 8:36:21.192 am com.apple.audio.DriverHelper[187]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextVEBox.
2/5/14 8:36:21.192 am com.apple.audio.DriverHelper[187]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IOBluetoothDeviceUserClient.
2/5/14 8:36:21.192 am com.apple.audio.DriverHelper[187]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IOHIDParamUserClient.
2/5/14 8:36:21.193 am com.apple.audio.DriverHelper[187]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IOSurfaceRootUserClient.
2/5/14 8:36:21.193 am com.apple.audio.DriverHelper[187]: The plug-in named AirPlay.driver requires extending the sandbox for the mach service named com.apple.AirPlayXPCHelper.
2/5/14 8:36:21.193 am com.apple.audio.DriverHelper[187]: The plug-in named AirPlay.driver requires extending the sandbox for the mach service named com.apple.blued.
2/5/14 8:36:21.243 am com.apple.audio.DriverHelper[187]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the IOKit user-client class IOBluetoothDeviceUserClient.
2/5/14 8:36:21.244 am com.apple.audio.DriverHelper[187]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.blued.
2/5/14 8:36:21.244 am com.apple.audio.DriverHelper[187]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.bluetoothaudiod.
2/5/14 8:36:21.278 am WindowServer[84]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
2/5/14 8:36:21.340 am WindowServer[84]: Display 0x04280480: Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
2/5/14 8:36:23.176 am UserEventAgent[174]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
2/5/14 8:36:23.391 am sharingd[202]: Starting Up...
2/5/14 8:36:23.481 am xpcproxy[207]: assertion failed: 13C1021: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
2/5/14 8:36:24.143 am WindowServer[84]: disable_update_timeout: UI updates were forcibly disabled by application "SystemUIServer" for over 1.00 seconds. Server has re-enabled them.
2/5/14 8:36:24.771 am com.apple.iCloudHelper[207]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
2/5/14 8:36:28.783 am com.apple.iCloudHelper[207]: AOSKit WARN: APS timeout encountered (cxn initialization)
2/5/14 8:36:28.783 am com.apple.iCloudHelper[207]: AOSKit WARN: Failed to get response from APSConnection's initialization method(s)
2/5/14 8:36:29.021 am com.apple.iCloudHelper[207]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
2/5/14 8:36:30.083 am com.apple.iCloudHelper[207]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
2/5/14 8:36:38.144 am WindowServer[84]: disable_update_likely_unbalanced: UI updates still disabled by application "SystemUIServer" after 15.00 seconds (server forcibly re-enabled them after 1.00 seconds). Likely an unbalanced disableUpdate call.
2/5/14 8:36:59.246 am com.apple.iCloudHelper[207]: ApplePushService: Connection timed out trying to communicate with apsd
2/5/14 8:37:14.483 am com.apple.iCloudHelper[207]: ApplePushService: Connection timed out trying to communicate with apsd
2/5/14 8:37:18.728 am com.apple.IconServicesAgent[213]: IconServicesAgent launched.
2/5/14 8:37:20.971 am com.apple.launchd.peruser.501[171]: (com.brother.LOGINserver[229]) Job failed to exec(3). Setting up event to tell us when to try again: 2: No such file or directory
2/5/14 8:37:20.971 am com.apple.launchd.peruser.501[171]: (com.brother.LOGINserver[229]) Job failed to exec(3) for weird reason: 2
2/5/14 8:37:20.975 am com.apple.SecurityServer[14]: Session 100007 created
2/5/14 8:37:21.162 am com.apple.SecurityServer[14]: Session 100008 created
2/5/14 8:37:22.227 am WiFiKeychainProxy[215]: [NO client logger] <Nov 10 2013 18:30:13> WIFICLOUDSYNC WiFiCloudSyncEngineCreate: created...
2/5/14 8:37:22.227 am WiFiKeychainProxy[215]: [NO client logger] <Nov 10 2013 18:30:13> WIFICLOUDSYNC WiFiCloudSyncEngineRegisterCallbacks: WiFiCloudSyncEngineCallbacks version - 0, bundle id - com.apple.wifi.WiFiKeychainProxy
2/5/14 8:37:45.125 am com.apple.SecurityServer[14]: Session 100011 created
2/5/14 8:37:47.000 am kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=228[GoogleSoftwareUp] final status 0x0, allowing (remove VALID) page
2/5/14 8:37:54.515 am accountsd[238]: assertion failed: 13C1021: liblaunch.dylib + 25164 [38D1AB2C-A476-385F-8EA8-7AB604CA1F89]: 0x25
2/5/14 8:37:55.448 am apsd[210]: Unrecognized leaf certificate
2/5/14 8:38:06.772 am WindowServer[84]: common_reenable_update: UI updates were finally reenabled by application "SystemUIServer" after 103.63 seconds (server forcibly re-enabled them after 1.00 seconds)
2/5/14 8:38:08.154 am SystemUIServer[182]: void CGSUpdateManager::log() const: conn 0x8d2b: spurious update.
2/5/14 8:38:13.536 am SystemUIServer[182]: Cannot find executable for CFBundle 0x7fb98ac35520 </System/Library/CoreServices/Menu Extras/Clock.menu> (not loaded)
2/5/14 8:38:13.552 am SystemUIServer[182]: Cannot find executable for CFBundle 0x7fb98ac20800 </System/Library/CoreServices/Menu Extras/Volume.menu> (not loaded)
2/5/14 8:38:19.690 am librariand[205]: [ERROR] [0.000s] default-qu framework_client.c:103 IPCSendMessageTimed() Could not send a message to ubd: Operation timed out
2/5/14 8:38:19.690 am librariand[205]: [ERROR] [0.000s] default-qu framework_client.c:737 IPCSyncingEnabled() failed to contact ubd: -1
2/5/14 8:38:34.789 am librariand[205]: [ERROR] [15.099s] default-qu framework_client.c:103 IPCSendMessageTimed() Could not send a message to ubd: Operation timed out
2/5/14 8:38:34.789 am librariand[205]: [ERROR] [15.099s] default-qu framework_client.c:737 IPCSyncingEnabled() failed to contact ubd: -1
2/5/14 8:39:11.229 am storeagent[241]: FCIsAppAllowedToLaunchExt [343] -- *** _FCMIGAppCanLaunch timed out. Returning false.
2/5/14 8:39:12.674 am parentalcontrolsd[248]: StartObservingFSEvents [849:] -- *** StartObservingFSEvents started event stream
2/5/14 8:39:13.288 am com.apple.time[174]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
2/5/14 8:39:14.535 am com.apple.SecurityServer[14]: Session 100013 created
2/5/14 8:39:39.278 am com.apple.iCloudHelper[207]: AOSKit ERROR: Config request failed, url=https://setup.icloud.com/configurations/init, requestHeaders=
"Accept-Language" = "en-us";
"X-Mme-Client-Info" = "<iMac13,1> <Mac OS X;10.9.2;13C1021> <com.apple.AOSKit/176>";
"X-Mme-Country" = SG;
"X-Mme-Nac-Version" = 11A457;
"X-Mme-Timezone" = "GMT+8";
error=Error Domain=kCFErrorDomainCFNetwork Code=-1001 "The request timed out." UserInfo=0x7ff801e07250 {NSErrorFailingURLStringKey=https://setup.icloud.com/configurations/init, NSLocalizedDescription=The request timed out., NSErrorFailingURLKey=https://setup.icloud.com/configurations/init}, httpStatusCode=-1, responseHeaders=
(null)
2/5/14 8:39:39.479 am sandboxd[239]: ([226]) assistantd(226) deny file-read-data /Library/Frameworks/TSLicense.framework/Versions/A/TSLicense
2/5/14 8:39:40.927 am sandboxd[239]: ([120]) ntpd(120) deny file-read-data /private/var/run/resolv.conf
2/5/14 8:39:41.729 am sandboxd[239]: ([120]) ntpd(120) deny file-read-data /private/var/run/resolv.conf
2/5/14 8:40:36.480 am LKDCHelper[256]: Starting (uid=501)
2/5/14 8:40:39.379 am com.apple.iCloudHelper[207]: AOSKit ERROR: Config request failed, url=https://setup.icloud.com/configurations/init, requestHeaders=
"Accept-Language" = "en-us";
"X-Mme-Client-Info" = "<iMac13,1> <Mac OS X;10.9.2;13C1021> <com.apple.AOSKit/176>";
"X-Mme-Country" = SG;
"X-Mme-Nac-Version" = 11A457;
"X-Mme-Timezone" = "GMT+8";
error=Error Domain=kCFErrorDomainCFNetwork Code=-1001 "The request timed out." UserInfo=0x7ff801e10320 {NSErrorFailingURLStringKey=https://setup.icloud.com/configurations/init, NSLocalizedDescription=The request timed out., NSErrorFailingURLKey=https://setup.icloud.com/configurations/init}, httpStatusCode=-1, responseHeaders=
(null)
2/5/14 8:40:39.410 am com.apple.iCloudHelper[207]: AOSKit ERROR: Setup request failed, appleID=1331111818, url=(null), requestHeaders=
(null),
error=Error Domain=AOSErrorDomain Code=1000 "The operation couldn’t be completed. (AOSErrorDomain error 1000.)" UserInfo=0x7ff801e25270 {HttpStatusCode=0, DialogInfo={
DialogType = Unknown;
}}, httpStatusCode=0, responseHeaders=
(null),
responseBody=
(null)
2/5/14 8:40:40.002 am com.apple.time[174]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
2/5/14 8:40:40.262 am mds[39]: (Normal) Volume: volume:0x7faefc094000 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/firmwaresyncd.GVtxu8
2/5/14 8:40:53.113 am com.apple.dock.extra[250]: <NSXPCConnection: 0x7ff860f17f90>: received an undecodable message (no exported object to receive message). Dropping message.
2/5/14 8:40:54.213 am secd[233]: __EnsureFreshParameters_block_invoke_2 SOSCloudKeychainSynchronizeAndWait: The operation couldn’t be completed. (SyncedDefaults error 1025 - Remote error : No valid account for KVS)
2/5/14 8:40:54.213 am secd[233]: __talkWithKVS_block_invoke callback error: The operation couldn’t be completed. (SyncedDefaults error 1025 - Remote error : No valid account for KVS)
2/5/14 8:40:54.372 am secd[233]: CFPropertyListReadFromFile file file:///Users/Johndandekar/Library/Keychains/54F98C75-0DC3-5591-B434-1E7BF5D373 41/accountStatus.plist: The file “accountStatus.plist” couldn’t be opened because there is no such file.
2/5/14 8:40:54.404 am secd[233]: SecErrorGetOSStatus unknown error domain: com.apple.security.sos.error for error: The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
2/5/14 8:40:54.404 am secd[233]: securityd_xpc_dictionary_handler WiFiKeychainProx[215] DeviceInCircle The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
2/5/14 8:41:06.693 am WindowServer[84]: disable_update_timeout: UI updates were forcibly disabled by application "Safari" for over 1.00 seconds. Server has re-enabled them.
2/5/14 8:41:20.693 am WindowServer[84]: disable_update_likely_unbalanced: UI updates still disabled by application "Safari" after 15.00 seconds (server forcibly re-enabled them after 1.00 seconds). Likely an unbalanced disableUpdate call.
2/5/14 8:42:06.685 am ntpd[109]: ntpd: time set +1.417472 s
2/5/14 8:42:06.693 am com.apple.time[174]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
2/5/14 8:42:12.250 am WindowServer[84]: common_reenable_update: UI updates were finally reenabled by application "Safari" after 65.14 seconds (server forcibly re-enabled them after 1.00 seconds)
2/5/14 8:44:32.201 am com.apple.SecurityServer[14]: Session 100014 created
2/5/14 8:44:32.441 am imagent[214]: [Warning] Creating empty account: PlaceholderAccount for service: IMDService (iMessage)
2/5/14 8:44:32.441 am imagent[214]: [Warning] Creating empty account: PlaceholderAccount for service: IMDService (iMessage)
2/5/14 8:44:32.605 am soagent[208]: No active accounts, killing soagent in 10 seconds
2/5/14 8:44:32.606 am soagent[208]: No active accounts, killing soagent in 10 seconds
2/5/14 8:44:42.605 am soagent[208]: Killing soagent.
2/5/14 8:44:42.606 am NotificationCenter[200]: SOHelperCenter main connection interrupted
2/5/14 8:44:42.606 am com.apple.dock.extra[250]: SOHelperCenter main connection interrupted
2/5/14 8:44:42.607 am imagent[214]: [Warning] Denying xpc connection, task does not have entitlement: com.apple.private.icfcallserver (soagent:208)
2/5/14 8:44:42.607 am imagent[214]: [Warning] Denying xpc connection, task does not have entitlement: com.apple.private.icfcallserver (soagent:208)
2/5/14 8:45:39.211 am ntpd[109]: FREQ state ignoring -0.000168 s
2/5/14 8:45:42.272 am mdworker32[259]: CGSConnectionByID: 0 is not a valid connection ID.
2/5/14 8:45:42.272 am mdworker32[259]: CGSGetSpaceManagementMode: No connection with id 0x 0
2/5/14 8:46:48.521 am ntpd[109]: FREQ state ignoring +0.000861 s
2/5/14 8:47:41.646 am xpcd[192]: restored permissions (100600 -> 100700) on /Users/Johndandekar/Library/Containers/com.apple.Notes/Container.plist
2/5/14 8:47:53.961 am com.apple.SecurityServer[14]: Session 100015 created
2/5/14 8:47:59.173 am WindowServer[84]: disable_update_timeout: UI updates were forcibly disabled by application "Notes" for over 1.00 seconds. Server has re-enabled them.
2/5/14 8:48:02.756 am WindowServer[84]: common_reenable_update: UI updates were finally reenabled by application "Notes" after 4.58 seconds (server forcibly re-enabled them after 1.00 seconds)
2/5/14 8:48:04.999 am com.apple.SecurityServer[14]: Session 100016 created
2/5/14 8:48:22.828 am ntpd[109]: FREQ state ignoring -0.000677 s
2/5/14 8:49:20.692 am sandboxd[239]: ([315]) mdworker(315) deny file-read-data /Applications/Microsoft Office 2011/Office/Media/Clipart/Bullets.localized/.localized () -
Satellite P100-203 need very long to start up
I bought my Satellite P100-203 computer in october 2006, since day 1 it takes a long time that the computer is ready with starting up. WXP MCE is installed. I think that a computer with Intell T2500 dual core 2.0 GHZ/1024MB should be ready in a minute...
Anyone an idea what the problem can be?Hello fred,
Believe me, the notebook with dual core 2.0 GHz CPU will not boot faster as a notebook with a Pentium4 2.0 GHz.
The question is. What and how many applications will load at the start up?
Many applications make the boot procedure slow and longer. I think you use the Anti virus software. If you will disable the starting of such applications at the beginning the notebook should boot up much faster -
"Preview.app" will need very long to startup...
Hi!
At home i have a G4 Dual 800 Mac with OS X 10.4.8.
The app "preview" needs there about 0,5sec to startup. Thats very good.
Now at my company i have a G5 Dual 2,3Ghz machine, also with OS X 10.4.8 and the app "preview" needs on every start about 4 sec. to start!
So whats the problem?
I deleted the preference file, but the problem is still going on.
What can i do, that "preview.app" starts up inner 1 sec.???There are no Errors in the console.log.
I watch it while i opend "preview.app"
It seems to be all OK.
No i do not open a pic, i just click on the icon in the dock to open "preview"
It needs about 3 seconds to open. :-((
I do not understand this problem. What can be wrong?
The System seems to be OK, i had repair the permissons. So it´s all OK, i don´t have other troubles with my system. -
K8N Diamond very long post/boot
ok then i have a AMD64 3500+ and twinx2048 corsair mem with a 450W coolermaster PSU. NVIDIA 6800GT PCIe one 200Gb Maxtor one DVD-RW drive. on ever install on XP i have done it will post then the screen goes black there is around a 10 min pause before getting the scrolling XP boot screen. The machine seem's very very slow and buggy. Changed mem to 512 Kingston strip same problem any idears.
Quote from: SniperBoB on 12-July-05, 07:59:04
i know of this problem i deal with it daily i work with pc's ever day fixing them. i have my sata drive on one of the silicon drive and have tryed the above method but to no avail
Well then , more advices is better than a few , even if you have checked it before .
Sure is something thats not initialized properly and after ten minutes whatever is holding it times out in the bios .
Guess you also have set the "halt state" to no errors and set sata-dma enabled .
Btw: SAB disabling the BITS service will prevent windows update to run .
-
Monitoring via WMI - query needs a long time to get a result
Hi experts!
I am using Icinga (Nagios Fork) and a plugin called check_wmi_plus.pl (Perl Skript) which uses the wmic linux implementation.
I have now multiple servers which needs very long to answer. I am using exactly the same command on the hosts. I give you an example here:
Server-A: WMI query needs ~70 Seconds, Ping Time is ~0.5-2.0 ms
Server-B: WMI query needs ~9 Seconds, Ping Time is ~90-120 ms
I ran exactly the same command, from the same host, with the same user credentials and they are on the same domain.
This behavior is not by the operting system because I have 2008r2 and 2003 servers which do both, need short and long time. They are all in different locations so there seems not to be a network issue. Hosts that are having the problems are 2008 hyper-v
hosts but also 2003 file servers.. so I dont see any match here.
I dont know how to go ahead, where to start the next troubleshooting steps?
Is there any WMI log on the server I can monitor?
Any help or ideas would be great! Thanks in advance!
cheers, Duffkessthis issue
might related to the network issues, please check the Receive Side Scaling and
the TCP Chimney registry settings. If TCP Chimney was enabled along with the
RSS setting, WMI would fail. <o:p></o:p>
Meanwhile
please test if the local basic WMI query also slow by
Administrator account.<o:p></o:p>
a. Run wbemtest, connect the namespace
root\cimv2<o:p></o:p>
b. Click Query… and enter query as: Select * from
Win32_ComputerSystem. <o:p></o:p>
c. Note down how many seconds does the query take.<o:p></o:p>
Please also test if the remote basic WMI query is slow by
Administrator account.<o:p></o:p>
a. Run wbemtest, connect the namespace
\\machinename\root\cimv2<o:p></o:p>
b. Click Query… and enter query as: Select * from
Win32_ComputerSystem. <o:p></o:p>
c. Note down how many seconds does the query take.<o:p></o:p>
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Why does Preview takes so long to boot up?
My Preview appliation on Lion takes very long to boot up. Also, why does the program quit once I close it? I have to start the program up each time I want to view a PDF. Acts like windows!!
The first thing to do is startup up in Safe Mode and see if the machine behaves acceptably. There is a second knowldege base article that may help give further guidance.
-
Warning this is very long code but i need help to see if I am on right trac
I have done all the following code myself and it is the buisiness layer for my application. I have tried to follow recommendations on previous posts and I would like to be told where I can clean up my code and how? This is not complete and it looks very long to me but I need help in order to be better. There are 4 button vlivks and I have not completed them all. The criteria for application is that phonebook will accept new entries if they have names surnames and phone numbers that are not longer than 10 characters for display purposes but can change this. No duplicates are allowed. No editing of a existing entry must lead to a duplicate entry either. No new entry or edit may result in a new contact having no phone numbers.
Many thanks for your time in advance,.....
import javax.swing.JOptionPane;
import java.util.ArrayList;
public class Contact
{// Start of the Contact class
ArrayList<ContactDetails> phoneList = new ArrayList<ContactDetails>(); // To hold all the contacts
ArrayList<ContactDetails> searchList = new ArrayList<ContactDetails>(); // To hold all contacts that return true on search
ArrayList<ContactDetails> list = new ArrayList<ContactDetails>();
String newName; // To hold the new name
String newSurname; // to hold the new surname
String newHome; // To hold the new home number if any
String newWork; // To hold the new work number
String newCell; // To hold the new cell number
final int MAX_LENGTH = 10;
public boolean addToPhoneList; // Sets to false if there is an invalid entry
public boolean addToSearchList; // Sets to false if there is an invlid search
public boolean modifyContact; // Sets to false if there is an invalid modification
// Method to create a new contact
public void createNew()
{// Start of create new()
addToPhoneList = true; // Set boolean to true each time the method is executed
getNewContactsName(); // Get new name
if(addToPhoneList == false)
createNew();
return;
getNewContactsSurname(); //Get new surname
if(addToPhoneList == false)
createNew();
return;
String checkName = newName; //Creates copies to be used in the checkIfDuplicate method
String checkSurname = newSurname;
addToPhoneList = checkIfDuplicate(checkName, checkSurname); //Check if the entries are duplicate
if(addToPhoneList == false)
createNew();
return;
getNewContactsHomeNum(); // Get new home number
if(addToPhoneList == false)
createNew();
return;
getNewContactsWorkNum(); // Get new work number
if(addToPhoneList == false)
createNew();
return;
getNewContactsCellNum(); // Get new cell number
if(addToPhoneList == false)
createNew();
return;
checkAtLeastOneNumEntered(); // Check that at least one phone number was entered
if(addToPhoneList == true)
updateListWithNew();
}// End of createNew()
// Method to search for an existing contact
public void searchExisting()
{// Start of searchExisting()
addToSearchList = true; // Set the boolean true
searchList.clear(); // Clear list from any previous searches
if(phoneList.size() > 0) // Check if any contacts are in the list
getExistingDetailsAndSearch(); // If there are entries then continue to search
else
JOptionPane.showMessageDialog(null,"There are no contacts to search for. Please use this option when you have added a contact to the list.","Error",JOptionPane.ERROR_MESSAGE);
}// End of searchExisting()
// Method to modify an existing contact
public void modifyExisting()
{// Start of modifyExisting()
modifyContact = true; // Set the boolean to true
if(phoneList.size() <= 0) // Check if the phonelist is not empty
JOptionPane.showMessageDialog(null,"There are no contacts to modify. Please use this option when there have been contacts added to the list.","Error",JOptionPane.ERROR_MESSAGE);
else
getExistingDetailsAndModify(); // If phonelist not emty continue to modify method
}// End of modifyExisting()
//Method to delete a contact from the list
public void deleteExisting()
//Method to get new contacts name
public void getNewContactsName()
newName = JOptionPane.showInputDialog("Please enter the new contacts name or press cancel to exit without saving.");
if(newName == null)
finish();
if(newName.trim().length()<=0)
JOptionPane.showMessageDialog(null,"You have not entered a name. Please try again.","Error",JOptionPane.ERROR_MESSAGE);
addToPhoneList = false;
return;
addToPhoneList = checkLengthValid(newName, "name");
//Method to get a new contacts surname
public void getNewContactsSurname()
newSurname = JOptionPane.showInputDialog("Please enter the new contacts surnname or press cancel to exit without saving.");
if(newSurname == null)
finish();
addToPhoneList = checkLengthValid(newSurname, "surname");
//Method to get a new contacts home number
public void getNewContactsHomeNum()
newHome = JOptionPane.showInputDialog("Please enter the new contacts home number or press cancel to exit without saving.");
if(newHome == null)
finish();
if(newHome.trim().length() > 0)
try
Long homeNum = Long.parseLong(newHome);
catch(Exception e)
JOptionPane.showMessageDialog(null,"You may only use numbers for a valid phone number. Please try again.","Error",JOptionPane.ERROR_MESSAGE);
addToPhoneList = false;
return;
addToPhoneList = checkLengthValid(newHome, "home number");
//Method to get a new contacst work number
public void getNewContactsWorkNum()
newWork = JOptionPane.showInputDialog("Please enter the new contacts work number or press cancel to exit without saving");
if(newWork == null)
finish();
if(newWork.trim().length()> 0)
try
Long workNum = Long.parseLong(newWork);
catch(Exception e)
JOptionPane.showMessageDialog(null,"You may only use numbers for a valid number. Please try again.","Error",JOptionPane.ERROR_MESSAGE);
addToPhoneList = false;
return;
addToPhoneList = checkLengthValid(newWork, "work number");
//Method to get a new contacts cell number
public void getNewContactsCellNum()
newCell = JOptionPane.showInputDialog("Please enter the new contacts cell number or press cancel to exit without saving");
if(newCell == null)
finish();
if(newCell.trim().length() > 0)
try
Long cellNum = Long.parseLong(newCell);
catch(Exception e)
JOptionPane.showMessageDialog(null,"You may only use numbers for a valid number. Please try again.","Error",JOptionPane.ERROR_MESSAGE);
addToPhoneList = false;
return;
addToPhoneList = checkLengthValid(newCell, "cell number");
//Method to get the details for an existing contact
public void getExistingDetailsAndSearch()
String existingName = getExistingName("search for");
if(existingName == null)
addToSearchList = false;
return;
if(existingName.length()<=0)
JOptionPane.showMessageDialog(null,"You have not entered a name please try again","Error",JOptionPane.ERROR_MESSAGE);
addToSearchList = false;
searchExisting();
String existingSurname = getExistingSurname();
if(existingSurname == null)
return;
if(addToSearchList == true)
searchAndAddIfFound(existingName, existingSurname);
//Method to get existing details and modify contact
public void getExistingDetailsAndModify()
String existingName = getExistingName("modify");
if(existingName == null)
modifyContact = false;
return;
if(existingName.length()<=0)
JOptionPane.showMessageDialog(null,"You have not entered a name please try again","Error",JOptionPane.ERROR_MESSAGE);
modifyContact = false;
modifyExisting();
String existingSurname = getExistingSurname();
if(existingSurname == null)
return;
if(modifyContact == true)
getContactBySearch(existingName.trim().toUpperCase(), existingSurname.trim().toUpperCase());
//Method to get the contact from list and modify details
public void getContactBySearch(String currentName, String currentSurname)
int count = 0;
int numFound = 0;
for(ContactDetails cd: phoneList)
cd = phoneList.get(count);
if((cd.name.equals(currentName))&&(cd.surname.equals(currentSurname)))
numFound ++;
changeDetails(cd);
count ++;
if(numFound <= 0)
JOptionPane.showMessageDialog(null,"No contacts matching the name and surname you entered found. Press the modify button to try again.","Information",JOptionPane.INFORMATION_MESSAGE);
//Method to get existing contacts name
public String getExistingName(String whatWasClicked)
String name = JOptionPane.showInputDialog("Please enter the contacts name that you wish to "+whatWasClicked);
return name;
//Method to get an existing contacts surname
public String getExistingSurname()
String surname = JOptionPane.showInputDialog("Please enter the contacts surname.");
return surname;
//Method to change the details of contact
public void changeDetails(ContactDetails conToChange)
String currentName = conToChange.name;
String currentSurname = conToChange.surname;
String currentHome = conToChange.home;
String currentWork = conToChange.work;
String currentCell = conToChange.cell;
String newNameForContact = getNewModName(currentName);
if(modifyContact == false)
modifyExisting();
return;
String newSurnameForContact = getNewModSurname(currentSurname);
if(modifyContact == false)
modifyExisting();
return;
String newHomeForContact = getNewModHome(currentHome);
if(modifyContact == false)
modifyExisting();
return;
String newWorkForContact = getNewModWork(currentWork);
if(modifyContact == false)
modifyExisting();
return;
String newCellForContact = getNewModCell(currentCell);
if(modifyContact == false)
modifyExisting();
return;
if(modifyContact == true)
conToChange.name = newNameForContact;
//Method to get the modified name
public String getNewModName(String currentName)
String newModifiedName = JOptionPane.showInputDialog("Please enter the new name for contact or press cancel to keep it as is.");
if(newModifiedName == null)
return currentName;
if(newModifiedName.trim().length() <= 0)
JOptionPane.showMessageDialog(null,"You may not replace the existing name with a blank name. Please try again.","Error",JOptionPane.ERROR_MESSAGE);
modifyContact = false;
return currentName;
modifyContact = checkLengthValid(newModifiedName, "modified name");
return newModifiedName;
//Method to get the modified surname
public String getNewModSurname(String currentSurname)
String newModifiedSurname = JOptionPane.showInputDialog("Please enter the new surname for the contact or press cancel to keep it as is.");
if(newModifiedSurname == null)
return currentSurname;
modifyContact = checkLengthValid(newModifiedSurname, "modified surname");
if(modifyContact == false)
JOptionPane.showMessageDialog(null,"Surname not changed.","Information",JOptionPane.INFORMATION_MESSAGE);
return currentSurname;
modifyContact = checkLengthValid(newModifiedSurname, "modified surname");
return newModifiedSurname;
//Method to search and update the list with a succesfull search
private void searchAndAddIfFound(String name, String surname)
int count = 0;
int numFound = 0;
for(ContactDetails cd: phoneList)
cd = phoneList.get(count);
if(cd.name.equals(name.trim().toUpperCase()))
numFound ++;
searchList.add(cd);
count ++;
if(numFound <= 0)
JOptionPane.showMessageDialog(null,"No contacts were found matching the dat you entered.","Information",JOptionPane.INFORMATION_MESSAGE);
else
list.clear();
list.addAll(searchList);
//Method that check all entries are a valid logical length
//Method is based on assumption that a normal name, surname, and phone numbers are not longer than 10 characters long.
//IF This method is changed please change the layout in the GUI as this is also set to fit with the layout that gives a neat //apperance
private boolean checkLengthValid(String detailEntered, String whatWasEntered)
boolean validLength = true;
if(detailEntered.trim().length() >= MAX_LENGTH)
JOptionPane.showMessageDialog(null,"The " +whatWasEntered+" you entered is too long. Please try again and use a "+whatWasEntered+" that is less than "+MAX_LENGTH+" characters long.","Error",JOptionPane.ERROR_MESSAGE);
validLength = false;
return validLength;
private void finish()
System.exit(0);
//Method to update the list with a new entry
private void updateListWithNew()
try
ContactDetails cd = new ContactDetails();
cd.name = newName.trim().toUpperCase();
cd.surname = newSurname.trim().toUpperCase();
cd.home = newHome.trim();
cd.work = newWork.trim();
cd.cell = newCell.trim();
phoneList.add(cd);
JOptionPane.showMessageDialog(null,"Contact succesfully entered. To save this change press exit to save or use the save option in the toolbar menu.","Information",JOptionPane.INFORMATION_MESSAGE);
catch(Exception e)
JOptionPane.showMessageDialog(null,"Failed to add contact to list. If problem persists please contact the software developer.","Error",JOptionPane.ERROR_MESSAGE);
list.clear();
list.addAll(phoneList);
//Method to check for duplicate
public boolean checkIfDuplicate(String nameToCheck, String surnameToCheck)
int count = 0;
boolean valid = true;
for(ContactDetails cd : phoneList)
cd = phoneList.get(count);
if(((nameToCheck.trim().toUpperCase()).equals(cd.name))&&((surnameToCheck.trim().toUpperCase()).equals(cd.surname)))
JOptionPane.showMessageDialog(null,"You may not enter a duplicate contact. Please try again and change the name and surname.","Error",JOptionPane.ERROR_MESSAGE);
valid = false;
break;
count ++;
return valid;
//Method to check that at least one phone number exists for contact
public void checkAtLeastOneNumEntered()
if((newHome.trim().length()<=0)&&(newWork.trim().length()<=0)&&(newCell.trim().length()<=0))
JOptionPane.showMessageDialog(null,"You have not entered any phone number at all. You must enter at least one phone number for a new contact.","Error",JOptionPane.ERROR_MESSAGE);
addToPhoneList = false;
//Method that returns the list to the GUI
public ArrayList<ContactDetails> getList()
return list;
}Should I start over from scratch? Can I get help with links to tutorials on following? How to create a java CRUD application (google not useful) and how to layer in java(google not useful)
This is my pres layer as is is this wrong too?
Filename: ContactsListInterface.java
Date: 16 March 2008
Programmer: Yucca Nel
Purpose: Provides a GUI for entering names and contact numbers into a telephone directory.
Also allows options for searching for a specific name and deleting of data from the record
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.text.*;
import java.io.*;
import java.util.*;
import java.text.*;
public class Phonebook1 extends JFrame implements ActionListener
{ //start of class
// construct fields, buttons, labels,text boxes, ArrayLists etc
JTextPane displayPane = new JTextPane();
JLabel listOfContacts = new JLabel("List Of Contacts"); // creates a label for the scrollpane
JButton createButton = new JButton("Create");
JButton searchButton = new JButton("Search");
JButton modifyButton = new JButton("Modify");
JButton deleteButton = new JButton("Delete");
Contact c = new Contact();
ArrayList<ContactDetails> contactList = c.getList();
// create an instance of the ContactsListInterface
public Phonebook1()
{ // start of cli()
super("Phonebook Interface");
} // end of cli()
public JMenuBar createMenuBar()
{ // start of the createMenuBar()
// construct and populate a menu bar
JMenuBar mnuBar = new JMenuBar(); // creates a menu bar
setJMenuBar(mnuBar);
JMenu mnuFile = new JMenu("File",true); // creates a file menu in the menu bar which is visible
mnuFile.setMnemonic(KeyEvent.VK_F);
mnuFile.setDisplayedMnemonicIndex(0);
mnuFile.setToolTipText("File Options");
mnuBar.add(mnuFile);
JMenuItem mnuFileExit = new JMenuItem("Save And Exit"); // creates an exit option in the file menu
mnuFileExit.setMnemonic(KeyEvent.VK_X);
mnuFileExit.setDisplayedMnemonicIndex(1);
mnuFileExit.setToolTipText("Close Application");
mnuFile.add(mnuFileExit);
mnuFileExit.setActionCommand("Exit");
mnuFileExit.addActionListener(this);
JMenu mnuEdit = new JMenu("Edit",true); // creates a menu for editing options
mnuEdit.setMnemonic(KeyEvent.VK_E);
mnuEdit.setDisplayedMnemonicIndex(0);
mnuEdit.setToolTipText("Edit Options");
mnuBar.add(mnuEdit);
JMenu mnuEditSort = new JMenu("Sort",true); // creates an option for sorting entries
mnuEditSort.setMnemonic(KeyEvent.VK_S);
mnuEditSort.setDisplayedMnemonicIndex(0);
mnuEdit.add(mnuEditSort);
JMenuItem mnuEditSortByName = new JMenuItem("Sort By Name"); // to sort entries by name
mnuEditSortByName.setMnemonic(KeyEvent.VK_N);
mnuEditSortByName.setDisplayedMnemonicIndex(8);
mnuEditSortByName.setToolTipText("Sort entries by first name");
mnuEditSortByName.setActionCommand("Name");
mnuEditSortByName.addActionListener(this);
mnuEditSort.add(mnuEditSortByName);
JMenuItem mnuEditSortBySurname = new JMenuItem("Sort By Surname"); // to sort entries by surname
mnuEditSortBySurname.setMnemonic(KeyEvent.VK_R);
mnuEditSortBySurname.setDisplayedMnemonicIndex(10);
mnuEditSortBySurname.setToolTipText("Sort entries by surname");
mnuEditSortBySurname.setActionCommand("Surname");
mnuEditSortBySurname.addActionListener(this);
mnuEditSort.add(mnuEditSortBySurname);
JMenu mnuHelp = new JMenu("Help",true); // creates a menu for help options
mnuHelp.setMnemonic(KeyEvent.VK_H);
mnuHelp.setDisplayedMnemonicIndex(0);
mnuHelp.setToolTipText("Help options");
mnuBar.add(mnuHelp);
JMenuItem mnuHelpHelp = new JMenuItem("Help"); // creates a help option for help topic
mnuHelpHelp.setMnemonic(KeyEvent.VK_P);
mnuHelpHelp.setDisplayedMnemonicIndex(3);
mnuHelpHelp.setToolTipText("Help Topic");
mnuHelpHelp.setActionCommand("Help");
mnuHelpHelp.addActionListener(this);
mnuHelp.add(mnuHelpHelp);
JMenuItem mnuHelpAbout = new JMenuItem("About"); // creates a about option for info about api
mnuHelpAbout.setMnemonic(KeyEvent.VK_T);
mnuHelpAbout.setDisplayedMnemonicIndex(4);
mnuHelpAbout.setToolTipText("About this program");
mnuHelpAbout.setActionCommand("About");
mnuHelpAbout.addActionListener(this);
mnuHelp.add(mnuHelpAbout);
return mnuBar;
} // end of the createMenuBar()
// create the content pane
public Container createContentPane()
{ // start of createContentPane()
//construct and populate panels and content pane
JPanel labelPanel = new JPanel(); // panel is only used to put the label for the textpane in
labelPanel.setLayout(new FlowLayout());
labelPanel.add(listOfContacts);
JPanel displayPanel = new JPanel();// panel is used to display all the contacts and thier numbers
setTabsAndStyles(displayPane);
displayPane = addTextToTextPane();
displayPane.setEditable(false);
JScrollPane scrollPane = new JScrollPane(displayPane);
scrollPane.setVerticalScrollBarPolicy(JScrollPane.VERTICAL_SCROLLBAR_ALWAYS); // pane is scrollable vertically
scrollPane.setWheelScrollingEnabled(true);// pane is scrollable by use of the mouse wheel
scrollPane.setPreferredSize(new Dimension(400,320));
displayPanel.add(scrollPane);
JPanel workPanel = new JPanel();// panel is used to enter, edit and delete data
workPanel.setLayout(new FlowLayout());
workPanel.add(createButton);
createButton.setToolTipText("Create a new entry");
createButton.addActionListener(this);
workPanel.add(searchButton);
searchButton.setToolTipText("Search for an entry by name number or surname");
searchButton.addActionListener(this);
workPanel.add(modifyButton);
modifyButton.setToolTipText("Modify an existing entry");
modifyButton.addActionListener(this);
workPanel.add(deleteButton);
deleteButton.setToolTipText("Delete an existing entry");
deleteButton.addActionListener(this);
labelPanel.setBackground(Color.red);
displayPanel.setBackground(Color.red);
workPanel.setBackground(Color.red);
// create container and set attributes
Container c = getContentPane();
c.setLayout(new BorderLayout(30,30));
c.add(labelPanel,BorderLayout.NORTH);
c.add(displayPanel,BorderLayout.CENTER);
c.add(workPanel,BorderLayout.SOUTH);
c.setBackground(Color.red);
// add a listener for the window closing and save
addWindowListener(
new WindowAdapter()
public void windowClosing(WindowEvent e)
int answer = JOptionPane.showConfirmDialog(null,"Are you sure you would like to save all changes and exit?","File submission",JOptionPane.YES_NO_OPTION);
if(answer == JOptionPane.YES_OPTION)
System.exit(0);
return c;
} // end of createContentPane()
protected void setTabsAndStyles(JTextPane displayPane)
{ // Start of setTabsAndStyles()
// set Font style
Style fontStyle = StyleContext.getDefaultStyleContext().getStyle(StyleContext.DEFAULT_STYLE);
Style regular = displayPane.addStyle("regular", fontStyle);
StyleConstants.setFontFamily(fontStyle, "SansSerif");
Style s = displayPane.addStyle("bold", regular);
StyleConstants.setBold(s,true);
} // End of setTabsAndStyles()
public JTextPane addTextToTextPane()
{ // start of addTextToTextPane()
int numberOfEntries = contactList.size();
int count = 0;
Document doc = displayPane.getDocument();
try
{ // start of tryblock
// clear previous text
doc.remove(0,doc.getLength());
// insert titles of columns
doc.insertString(0,"NAME\tSURNAME\tHOME NO\tWORK NO\tCELL NO\n",displayPane.getStyle("bold"));
for(ContactDetails cd : contactList)
cd = contactList.get(count);
doc.insertString(doc.getLength(),cd.name+"\t"+cd.surname+"\t"+cd.home+"\t"+cd.work+"\t"+cd.cell+"\n",displayPane.getStyle("regular"));
count ++;
} // end of try block
catch(BadLocationException ble)
{ // start of ble exception handler
System.err.println("Could not insert text.");
} // end of ble exception handler
return displayPane;
} // end of addTextToTextPane()
// code to process user clicks
public void actionPerformed(ActionEvent e)
{ // start of actionPerformed()
String arg = e.getActionCommand();
// user clicks create button
if(arg.equals("Create"))
c.createNew(); // method to create a new Contact
addTextToTextPane();
if(arg.equals("Search"))
c.searchExisting(); // method to search for an existing entry
addTextToTextPane();
if(arg.equals("Modify"))
c.modifyExisting(); // method to modify contact
addTextToTextPane();
if(arg.equals("Delete"))
c.deleteExisting();
addTextToTextPane();
if(arg.equals("Exit"))
} // end of actionPerformed()
// method to create a new contact
public static void main(String[] args)
{ // start of main()
// Set look and feel of interface
try
{ // start of try block
UIManager.setLookAndFeel("com.sun.java.swing.plaf.windows.WindowsLookAndFeel");
} // end of try block
catch(Exception e)
{ // start of catch block
JOptionPane.showMessageDialog(null,"There was an error in setting the look and feel of this application","Error",JOptionPane.INFORMATION_MESSAGE);
} // end of catch block
Phonebook1 pb = new Phonebook1();
pb.setDefaultCloseOperation(JFrame.DO_NOTHING_ON_CLOSE);
pb.setJMenuBar(pb.createMenuBar());
pb.setContentPane(pb.createContentPane());
pb.setSize(520,500);
pb.setVisible(true);
pb.setResizable(false);
} // end of main()
} //end of class -
Failover of ASCS takes very long on a Windows Server 2008 Cluster
Hello everybody,
I have configured a ABAP SCS (NetWeaver 7.0) running on a Windows Server 2008 Cluster. The database runs on SQL Server 2008 which is also configured for use in the MSCS. The ASCS and the database run fine in the Cluster. So far so good.
When I want to move the SAP Group which contains the ASCS from on node the other node, then the failover will take very long (approximately 2-3 minutes). The Service of the group will go offline in a few seconds, but the Instance needs about 1 minute to go offline and on the other node it needs more then one minute to become online.
The failover of the databaseinstance will take only about 10 seconds.
Have you got any ideas why the failover of the SAP Group will take so long?
Thanks for your help in advance!
Kind Regards,
WolfgangOne minute would be somewhat long if you are running a faster server and just the ABAP environment. But I've seen ABAP/JAVA systems take up to 10 minutes to restart on a win 2005 clustered system.
Have you looked through the developer traces?
J. Haynes -
I got a new laptop (Macbook Pro) and my IPhone is synced with my previous laptop (which I no longer have). I've recorded dozens of very long (un-emailable) Voice Memos over the last few weeks and need to get them from my IPhone onto my new laptop.
How do I do this?
(when I click on the Sync option I get the warning: "Are you sure you want to sync music? All existing songs and playlists on the iPhone will be replaced with songs and playlists from your iTunes library." I fear that if I click this I will lose all of my important Voice Memos as well)Just to add to what ChrisJ4203 said. You can sync them to your new computer using iTunes by selecting to Include Voice Memos on the Music tab of your iTunes sync settings and syncing. However, you still need to re-establish syncing with the new computer without iTunes erasing all the iTunes media from your phone (as the warning mentioned).
If you copy your entire iTunes folder (not just your music) from your old computer to your new one, along with other non-iTunes media you may be syncing with iTunes (such as contacts, calendars and any photos synced to your phone from your old computer) by using migration assistant of following one of these methods: http://support.apple.com/kb/HT4527, then when you sync again with your new computer it will recognize your phone and sync as it did before. You will still have to authorize the new computer for any Apple IDs used to purchase from the iTunes and App stores (in iTunes>Store>Authorize this computer).
After that you can sync your voice memos to your computer as mentioned earlier.
If you want to archive your voice memos before you do anything with iTunes, you can use a 3rd party program such as PhoneView or Touch Copy. -
My Apple iPad 3 is less than 6 months old - purchased in March of 2012. I believe it already needs a new battery. It will not hold a charge for very long andvs very slow in starting up a carge when I plug it in. Please advise - it is very annoying.
Take it to Apple Store. You are covered under your 1 year warranty.
-
Hi!
I need to load a GET url that si very long. On other browsers, I can load the url. In firefox 3.6, no.
There is an addons or a plugin so I can extend this limit? If yes, is possible to load automatically this addons when loading a certain page? thanks
The url is sometingh like this (this is correctly loaded, but it could be longer)Firefox should have problems with long GET data appended to an URL (long would be over 64k).<br />
If there are problems then it is possible that an extension is the cause of that.
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]] -
My os x mavericks got crashed accidentely while installing the windows 8 and I am trying to reinstall using recovery console, but its take very long time and forcing me to download OS X mountain lion from internet, is there any where can I get offline download of OS file where I can install directely OS X Mavericks.
Hi, original poster here. I did not realize this would generate more discussion so I never checked back. I still had my warranty, so I took it to the store and got it repaired. The original problem I had was a screen with this icon flashing when I attempted to boot it up:
When I took it to the store, they told me that my computer was unable to communicate with the hard drive. I had this same problem three times in two months where this screen reappeared. Each time I went back to the store and they said the cause was different, but they were all hardware issues that physically made it impossible to communicate with the hard drive. After the third time, they simply replaced my laptop and I haven't had the same problem.
So in short: The reason you can't reinstall or move anything when you encounter this screen appears to be because nothing can communicate with the hard drive in the first place. You can't reach the disk or anything on it. So I don't believe it's possible to do anything besides take it to a physical store and have it fixed.
Maybe you are looking for
-
Iphone 5s incoming call number displays incorrectly.
Whenever I call my wife's Iphone from work, the number displays incorrectly on her caller ID. It is always dropping the third number of the area code, so if my work number was 123-456-7890, then when I call her it shows up on her phone as 124-567-89
-
Is anyone having trouble with smart groups being recognized in mail after the Maverick update?
Since I updated my iOS to Mavericks, my smart groups are no longer recognized in Mail. Is anyone else having this problem? How can I fix it?
-
I can't save photos from google images anymore when I press the photo it doesn't give me the option to save anymore Please help
-
SQL 2012 Cluster install - error msg
Hi I am in the process of installing SQL server 2012 cluster, on the Instance configuration page where i gave "SQL Server Network Name" as "appsqlclsA" and the "Named Instance" as "Ins01". I am getting the below error msg, i am not sure exactly what
-
The CWGraph3D axis loose fit behavior
The CWGraph3D control's X,Y and Z axis behave as if they have a loose fit. That is, they do not make their axis minimum and maximum limits correspond to what their data values are but instead round the minimum down and maximum up to some integer inc