Satellite 2410-413: USB2 PCMCIA card doesn't work

Good morning. It is my first time on a forum, and my English is poor.
I have tried to install a PCMCIA card with 4 USB-2 ports (hw & sw) on my Satellite 2410-413 in order to use a DTV dongle (hw & sw).
It will not work: The ports seem to be declared all right in the computer but in effect, a simple 64 MB USB-2 memory key [a Sony "micro-vault" key), will not work, and neither will the Winfast DTV dongle.
Paradoxically, both the mem key will work on any of the three USB-1 ports, and the DV dongle will light up on any USB-1 port. The PCMCIA card with 4 USB-2 ports is new. I cannot locate the origin of the problem.
Would any one help me with this question?
Thank you in aadvance for your reply. Here is (maybe ?)
Another way of formulating the question: how are USB ports managed by the system?

> Hello Rasta
>
> Sorry but I think that this question should be the
> right one for PCMCIA producer. Try to visit their
> support page. Maybe you will find some answers.
> Believe me on this way it is not easy to say why this
> happen. Toshiba is maybe responsible for PCMCIA card
> functionality but not for used card.
>
> Good luck!
Many thanks to you Mike30.
I have a couple of ideas now:
- supplying the USB2 card with additional power (ie other power than computer), (but how?)
- uninstalling and further, re-installing the USB2 "Truewin" PCMCIA card bus, and after that trying the "leadtek-brand" DTV sw.
Cheers,
Philippe

Similar Messages

Satellite M40-129: PCMCIA Card doesn't work with Linux

I have D-Link DWL-G650 with Atheros Chipset which is good supported under linux (madwifi). But if I boot Linux the card is not found. I tested the card with an Fujitsu Siemens Notebook and it worked out of the box!
Any idea why it doesn't work with my M40-129 ?

Hi
Like you know Toshiba doesnt support the Linux and there are no Toshiba drivers for the Linux OS but I was able to find this useful Toshiba page about the notebook configuration with Linux:
http://newsletter.toshiba-tro.de/main/
You should check the OS machine compatibility and the other areas.
Im sure you will find many useful tips.
Good luck

Satellite P100-429 - New WLAN card doesn't work

Hi,
I've just upgraded my home network to draft 'N' standard and thought I'd upgrade my WiFi card on my P100-429 Laptop;
Laptop is running Vista Home Premium, and has the latest BIOS and Drivers installed.
Laptop currently has an Intel 3945ABG card fitted, which works fine. I purchased an Intel 4965AGN Card but when I fit it, the computer powers up, but wont load (lights on, fan on - nothing else)
O.K. - So I read up on a few forums, could be a bad card, so I bought a Toshiba branded 4965AGN card - P/N G86C0002P710
Still have the same problem - the computer refuses to start up. Intel tech support say the card should work?
Obviously a compatability issue - is there anything I can do about it?
Or does anybody know what type of card I should use?
Thanks for your help!

Im not a Satellite P100 owner but is your notebook equipped with 3 or only 2 antennas?
If your notebook does only have 2 antennas you cant upgrade it to draft N because this WiFi standard needs 3 antennas.
I think your notebook does only have 2 antennas so this would be the reason why both cards are not compatible to your notebook.
Greets

Satellite 5200-903: Mini PCI Card doesn`t work

Hello,
I am a user of an:
Satellite 5200-903: P4-M 2.2/256+256 DDR/60GB/15T SXGA+/DVD-R-RW/nV FX 5600/cPad/WIFI ready/XP
My computer is equipped with an Toshiba Wirless lan Mini PCI Card.
I installed the card a few years ago - everything worked wonderfull.
At the beginning of 2006 I installed a new operating system (XP Pro + SP1, same system as before) because it was necessary.
I installed all driver for the W-Lan Card, obviously the card worked in the correct way (no driver incompatibility or other problems).
But, and thats the reason of this topic here. It isn`t possible to connect my card to any Hot Spot. I tried it with 2 different access points, but the result is the same. "No connection Point found".
Has anyone any idea what to do or in which direction I could look for the failure? Is there maybe any special Software necessary (I couldn`t remember, that in my last installation I had needed special driver or software)
If further informations are necessary, please inform myself.
(sorry for the terrible english, but it isnt my first language.)
THX for your help

Hi,
thx for the hints. But unfortunately none of these solved my problem.
1. I checked my device Manager, it`s shown a Toshiba Wireless LAN Mini Pci Card
2. The device is activated, with no problems
3. My wireless activation switch on the left notebook side is activated (led lights yellow)
4. Pushing the Fn+F8 Button results nothing
(wenn i press the combination during the Notebook switch is off - i got the message "wireless connection is deactivated, please activate")
What have to happen, when pushing the Fn+F8 Button during the wireless switch is activated? Is there any message on the screen?
Concerning the installed driver, how could I check what type of card is installed in my notebook. I know, that there a two types of driver and card existing, toshiba and atheros.
But, if the installed driver causes no problems I guess the right driver is installed.
Thx for any further Idea...
C.

P20-552: 2GB SD card doesn't work.

I have a P20-552 (PSP26E-025E9-S4) which is about 18 months old. I recently bought a Canon digital camera (IxUS 750) with a 2GB Sandisk Ultra II SD card and the combination is working well. Although I can transfer images from the camera to my Toshiba portable using an USB cable, sometimes I would like to use the SD slot on the portable but there seems to be a problem: seconds after pressing home the SD card in the slot I get the message "Disk is not formatted - Do you want to format it now?". I reply OK but then I get the message "The disk in drive E cannot be formatted"
The card continues to work perfectly well in both my camera and in my iPaq PocketPC. The SD card slot in the Toshiba will work quite happily with the Sandisk 256MB SD card that is usually in my PDA.
Anybody has any idea why the 2GB card doesn't work in the Toshiba? Is it a question of updating a driver - I did look the other day but I couldn't find anything that to me seemed appropriate but I might well have overlooked something..
I am running XP Home (SP2) and have fully automatic updates ON. I have Norton Virus and Zone Alarm running and am not experiencing any problems with any other software/applications - at least, no problem since someone suggested vacuuming my overheating laptop a few weeks ago ;-)
Thanks, Brian.

It seems that the unit doesnt support this card.
Check your user manual. There you will find a information that this unit supports only the following SD card sizes: 8/16/32/64/128/256 and 512 MB
According to this document the 2 GB are to high.

Ethernet card doesn't work with new arch install?

Hi guys,
so this is kinda my first post, not that I'm new to arch i just never had an issue i couldn't figure out on my own... But i love arch i have been using it for about a year now and have had no serious problems except for this. I have had arch running on an older dell vostro 200 desktop before i reinstalled with a vary similar issue except that the fix i came up with doesn't work anymore. I will tell you about the first issue first because i ALMOST posted on here about it originally but i figured out a way to make it work even though it was a hassle.
After cold/rebooting my computer the network card doesn't work at all. lspci reported that the kernel module e1000e was the correct one (i have verified this) and that the kernel has loaded it, i verified that with dmesg but still it wouldn't work. After much much anguish and hairpulling, I realized that it had to have something to do with the module so i tried forcing it to reload with rmmod e1000e and modprobe e1000e and it still wouldn't work until i physically unpluged the ethernet cord and pluged it back in until the light on the NIC turned on. After that everything works as normal i could even unplug and plug it back in with no problems. So eventually i wrote a script that did this for me (except for the uplugging and plugging part) and i used that when i cold/rebooted.
But now i have the exact same issue after reinstalling arch to the T except for the fact that the (crazy) fix i came up with doesn't work now. I used my "fix" after booting from the arch cd and it worked just like it always has. And now after rebooting into my fresh system the fix doesn't work anymore. So now i'm back where i was to begin with but i have no idea what to try next. I didn't do anything particularly different during installation except i added a udev rule for the e1000e module just to see if somehow that would fix the problem... it didnt and i have since deleted that (to see if it was the problem). The only other thing that is different is the root and home are now btrfs partitions instead of ext4.
I have booted several other live cds and dvds (diferent distros) including arch derivatives such as manjaro and they all worked just fine, using the same kernel module (e1000e). I'm not sure what that could mean but i know that it means there is a fix for this some way or another. I am going to hook up a wifi adapter and connect that computer to the internet to put some more information up if it's needed (asked for) but for now lspci -vnn | grep -i -A 10 net reports
00:19.0 Ethernet controller [0200]: Intel Corporation 82562V-2 10/100 Network Connection [8086:10c0] (rev 02)
Subsystem: Dell Device 0238
Flags: bus master, fast devsel, latency 0, IRQ 42
Memory at fdfc0000 (32-bit non-prefetchable) [size=128k]
Memory at fdfff000 (32-bit non-prefetchable) [size=4k]
I/0 ports at ff00 [size=32]
Capabilities: [c8] Power Management version 2
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [e0] Vendor Specific Information: Len=06 <?>
Kernel driver in use: e1000e
Kernel modules: e1000e
ip a reports:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
3: enp0s25: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 00:1d:09:8c:36:f6 brd ff:ff:ff:ff:ff:ff
4: wlp0s29f7u3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 64:66:b3:16:92:10 brd ff:ff:ff:ff:ff:ff
inet 172.16.1.55/16 brd 172.16.255.255 scope global wlp0s29f7u3
valid_lft forever preferred_lft forever
inet6 fe80::6666:b3ff:fe16:9210/64 scope link
valid_lft forever preferred_lft forever
lsmod | grep e1000e
e1000e 215644 0
ptp 17692 1 e1000e
any help on what to do next would be greatly appreciated.
Last edited by mvheart/dev/null (2014-08-18 04:02:12)

Sorry I was thinking that it was say "state up" after that, I was looking in the wrong place... It's been a long time since I was playing around with this. So it is as i thought it was before?
[aaron@arch-box Arch-Linux]$ sudo systemctl start [email protected]
[sudo] password for aaron:
Job for [email protected] failed. See 'systemctl status [email protected]' and 'journalctl -xn' for details.
[aaron@arch-box Arch-Linux]$ systemctl status -l [email protected]
● [email protected] - dhcpcd on enp0s25
Loaded: loaded (/usr/lib/systemd/system/[email protected]; disabled)
Active: failed (Result: exit-code) since Mon 2014-08-18 11:20:29 EDT; 4min 11s ago
Process: 17650 ExecStart=/usr/bin/dhcpcd -q -w %I (code=exited, status=1/FAILURE)
Aug 18 11:19:59 arch-box dhcpcd[17650]: version 6.4.3 starting
Aug 18 11:19:59 arch-box dhcpcd[17650]: enp0s25: adding address fe80::ae3:ee04:7099:77c5
Aug 18 11:19:59 arch-box systemd[1]: Starting dhcpcd on enp0s25...
Aug 18 11:19:59 arch-box dhcpcd[17650]: enp0s25: waiting for carrier
Aug 18 11:20:29 arch-box systemd[1]: [email protected]: control process exited, code=exited status=1
Aug 18 11:20:29 arch-box systemd[1]: Failed to start dhcpcd on enp0s25.
Aug 18 11:20:29 arch-box systemd[1]: Unit [email protected] entered failed state.
Last edited by mvheart/dev/null (2014-08-18 15:50:10)

My Card doesn't work anymore and keeps asking me for the card information. How do I turn the card option back to "none".

How do I turn this off? I can't download anything until I put in the card's information. But the card doesn't work anymore, it ran out of money. It keeps saying that my last perchase was unseccessful or something. I just want this to stop so I can update and download apps! Please help!

My iMac with Snow Leopard 10.6.8 crahed b/c the HD cannot be repaired. I reinstalled Mac OS X and luckily have most documents and applications. I have moved them all into folders before I erase the HD. I had all my documents but lost the 3 applications for iWorks. It says go to the store, buy and enter your serial#. That is not working. Here it is:MB966Z/A
WVL 001299 10959191-000
I need the updates. Apple has my sign in Apple ID.
Thanks,
pandaposyus

What do you do went your iTunes redeem card doesn't work ?, What do you do went your iTunes redeem card doesn't work ?

What do you do went your iTunes redeem card doesn't work ?, What do you do went your iTunes redeem card doesn't work ?

Welcome to the Apple Community.
The following article(s) may help you.
iTunes Card and Gift Certificate FAQ

Why my nano cut sim card doesn't work on iphone 5c?

why my nano cut sim card doesn't work on iphone 5c?

Cut cards often don't work. Get a real nano SIM from your cell carrier.
Regards.

Satellite 1900-803: Hi-Speed USB 2.0 card doesn't work

i have a satellite 1900-803 laptop. I recently bought and installed a Belkin Hi-Speed USB 2.0 Notebook Card but it doesn't work. the card's manual says that after successful installation i should see a second "universal serial bus controllers" heading which i didn't. i even had it replaced it with another one thinking that there might be some problems with the drivers, but it still doesn't work. everytime i plug in a device such as an mp3 player, a digital camera or a usb storage device, windows just suddenly locks itself up, the cursor won't move, the ctrl-alt-del function doesn't work, and the worst of all, i can't turn off the machine!
the card says that it runs on any 32-bit slot.
i've browsed the user's manual and the device manager to see if mine is a 32-bit one, but i can't really find it. is this probably the reason why it won't work? or is there any other reason for it not working? if this is the reason, is there a way where i can upgrade my laptop's pc card slot to make it work?
please help.
i've posted this question yesterday morning and haven't got a single reply. is it because it has got to do with an older laptop? please, anybody, help..........
Message was edited by: wes0702

Hi
Did you check the Bios? I assume the Toshiba Bios was preinstalled on your notebook. Am I right? There should be an option for changing the PC card controller mode.
There you can change the controller mode to auto-selected, PCIC compatible or Card bus/16-bit.
If the card supports 32 bit so you shouldnt use the 16bit option.
I think you should play a little bit with this option and possibly the card will work.

Satellite L850 - 13N - Function keys ("FN") doesn't work

Hello,
I have Toshiba Satellite L850-13N with Windows 7 x64. The problem is that my function keys doesn't work. Could someone write me which drivers i need to install ?
PS. sorry for my english :)
Thanks for the help.

What you need is Flash card utility and this utility is part of Toshiba VAP. As as*** already wrote reinstall VAP.
Remove preinstalled version from the system, restart your notebook and install latest version that you can find on Toshiba download page - http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp
I hope this will help you.
Post some feedback.

Satellite A110-195 PSAB0E - sound card has stopped working

Hello,
My sound card has stopped working it was working fine but suddenly the sound quality started to faint and finally it stopped working i have tried the following methods:
Realtek is default audio
Control Panel/ Sound & Audio Devices/ Audio tab/ Sound Playback click on down arrow and check that the correct audio is selected. Typically the problem will be they something like "modem line 0 playback" might have been substituted for the proper audio device.( Didn't Worked)
Chipset Utility - install ( Did'n't Worked Aswell)
Start / Control Panel / Administrative Tools / Component Services / a separate window will open in left pane click Services(Local) from the tree / Scroll down to Windows Audio service / if the service is Disabled or Manual right click > select Properties > under Startup Type change to Automatic > click Apply / click Start > OK Reboot. (Worked) But First The Quality Was Not As It Was Before And Then Sound Card Stopped Working Again.
Try a System File Check
go to Run - type "sfc /scannow" No Success.
I have installed windows again but no success. :(
Here Is The Detailed Model No. Satellite A110-195
PSAB0E-00F00KAR
Windows XP Home Edition SP2

No It Appears In Device Manager And In Control Panel.
This Method Worked But The Sound Level Was Not As Good As it Used To Be:
tart / Control Panel / Administrative Tools / Component Services / a separate window will open in left pane click Services(Local) from the tree / Scroll down to Windows Audio service / if the service is Disabled or Manual right click > select Properties > under Startup Type change to Automatic > click Apply / click Start > OK Reboot.

ICloud is messing with my phone and now iStore says my card doesn't work.

Okay. Where do I begin. I feel like a crazy person, Anyway.
So all of this started when I got my MacBook Pro. I had just got a new e-mail so of course I want to update my iCloud account with the new e-mail and a new password. Seems easy enough but NO, it's been a nightmare.
1. I can't update, delete or do anything with the iCloud setting in my phone, which is still registered to the old e-mail. It keeps asking for the old password and it does not make sense because it has been disabled. Help me god.
2. I can't update or do anything in the App/iTunes Store because it keeps asking for verification, which leads to my card info (was already saved) but now all I get is it has either been declined or is not a valid payment option etc etc etc.
3. Same thing as number 2 happened on my iTunes Store on my macbook.
And that's it. My phone is having a meltdown because he's stuck in some sort of non-existant iCloud account twilight zone. I've tried everything and nothing seems to work, I get nothing from the apple support (thanks Apple! Great customer care by the way!) and no one around me seems to know what to do or what the deal is.
I'm just a simple human being that gets very frustrated when technology doesn't work.
So if anyone out there is really smart and can figure this out and tell me step by step what to do before I set my phone on fire, please help me!
I'd really appreciate it. Thanks!

Does your phone charge without issues when using the Apple supplied charger?
If it does, the issue is with the Mophie.
If it does not, the issue may be with the iPhone or may simply be a dirty dock connector.

KA780G second network card doesn't work

Hi everybody,
Today, I put an second network card on the KA780G board (it's for a round robin network), on a free PCI slot, and this card isn't recognised by Linux and Windows (in Windows XP, when the network card is connected, my graphical card works bad as well).
I tested this network card in another computer and it's working well, I try with another type of network card and it's not working.
I upgraded the BIOS with the latest release and reset the bios parameters but it doesn't work.
Do I need to put some specifics parameters in the BIOS ?
Someone as an idea ?
Thanks
Matt

As you want... but I know the truth
Transfert a file takes me twice the time when the second network card was unpluged (the test was made with two differents files with the same size, this is for keeping disk caching speeding the transfert).
I think, your're not understanding, so let me explain the achitecture of my network : two computers pluged to my "super magic switch" (each with one network card) and my NAS with two round robin's network card.
I transfert one file from the NAS to the first computer and at the same time another file from the NAS to the second computer. The network speed was (on the NAS) about 24MB/s (see with the system monitor).
If you're right explain me why many people using port trunking with their switches ?
Matt.

IPhone 5 sim card doesn't work

Hi,
One day the SIM card in IPhone 5 just stopped working. I can see the network on the desktop and in general settings, but it does not work for real. I can't make a call, send a message or get internet. Sometimes it goes "No service", "Searching" but then goes back.
I have checked this SIM card with different phone - it works properly good. Any different SIM card in my IPhone also doesn't work.
So I went to the Apple Store (Indonesia, Denpasar, Bali) they said you need to reset all the content and settings. So I did all and nothing happened.
Again SIM doesn't work - same situation. What is interesting sometimes I'm getting messages from the network so it seems that SIM card works some time but I can not make any calls or actions with SIM.
In the App Store guys told me this might be a hardware problem which could not be solved it's just broken.
They say you can exchange an IPhone for the new one but not in Bali because they don't have IPhone 5 anymore. Is it fair?
Please help me what can I do and how can I make my IPhone works or exchanged it for a new one.
I will be in Malaysia, Kuala Lumpur on February 7th. Can I exchange my IPhone here?
Version 7.1.1 (11D201)
was bought in USA 2,5 years ago
I live in Bali, Indonesia
Thank you in advance for any help.
Best regards,
Yulia

Thank you. I bought IPhone in USA 2 years ago.
"The iPhone warranty is not international" - it's very sad. Just wondering why people in the Store told me different things.

Satellite 2410-413: USB2 PCMCIA card doesn't work

Similar Messages

Maybe you are looking for