Satellite 3000-X11 bios updated

I have downloaded the latest bios 1.60 for my Satellite 3000-X11 but after making the updated bios floppy disk and rebooting my computer, it says it is the wrong bios file in the floppy. Anyone knows what's wrong?
Thanks

Hi,
just to get sure that you made the update correctly, here are the steps
BIOS Upgrade Procedure for Satellite 3000-xxx
1.)Extract the zip file containing the BIOS upgrade to a temporary folder.
2.)Insert a formatted 1.44MB diskette in the floppy disk drive.
3.)Execute the extracted *.exe file in the temporary folder. Follow the instructions on the screen. A BIOS update diskette will be generated
4.)Ensure the Notebook is connected to the mains.
5.)Turn the Notebook off.
6.)Insert the floppy disk containing the BIOS upgrade into drive A: and turn the Notebook on.
7.)Follow the on-screen instructions.
8.)When the procedure is complete, remove the floppy disk and restart the Notebook.
bye

Similar Messages

BIOS updating issue on Satellite 3000 -X11

Hello,
I found a lot of people complaining of this same issue.
I found no solution posted. Most threads (now locked) ended with people saying "Don't update your bios if it is running okay"
This computer is not running okay and I would like to update the BIOS.
The issue is that the bios update says it failed due to the update not being for this model of computer.
The laptop is a Satellite 3000-X11. I have downloaded the v1.6 BIOS update for the Satellite 3000-X11
So I am not sure why it makes this complaint.
Please advise if there is something more I can do here.
Also please know the BIOS update procedure I followed was exactly per the instructions.
Thanks,
Jonathan

(sorry about the name change. Somehow ended up with two profiles when I accessed the forums via a different country site)
As per my original post... the computer does NOT run okay.
That is why I wish to try updating the BIOS.
It has issues with it not starting or starting but with a screen that is so dimmed it looks blank. Looking really hard at it I can see it is not blank, just VERY VERY dim.
I wish to update the BIOS just in case that fixes things.
The BIOS update complains that the PC is not the right model for this update, when it is the right model.
Thanks,
Jonathan

Satellite 3000 x11 cannot use its network card

On my friend's satellite 3000 x11 I'm trying to configure it to connect to my uni halls internet, but to do that I need the MAC address. If I do ipconfig it just says "Windows IP configuration" and nothing else.
If I go to device manager there's no category for network adaptors, even though I can see the ethernet port on the back. Its almost as if it doesnt know it has on-board LAN.
Back home her brother used to use it with the built-in modem , but not the ethernet port.
Any ideas?

Hi
Some Toshiba models have an RJ45-port (Ethernet) but nothing behind it - means no network controller. The machine is prepared for LAN but no LAN built in.
So you have to get f.ex. a PC Card to hook it up to the LAN.
BR
Tom

Replacement of rubber feet on Satellite 3000-X11

Hi
Does anyone know where I can get 2 replacement rubber feet for the underside of a Satellite 3000-X11? I have spent ages looking around the Toshiba site but nothing useful coming up.
Thanks in advance
Jon

Hi
Just to let you know, I phoned the Toshiba Authorised Service Partner. I called them and although they did not have any in stock, have ordered a pack of 4 which I should get in a few weeks. Minimum order of about 15 though!!
Jon

Satellite 3000-X11: Four beeps at start-up, blank screen

Hi folks,
A friend has given me a laptop to try and fix. It's a Toshiba Satellite 3000-X11.
Sometimes it works fine. Starts up like normal.
Sometimes, fairly randomly, it will not start. In this instance nothing will come up on the screen at powerup. The fan will kick in. The screen is black and there are four beeps. About 1 per second. It then sits there. On, but half dead. Can hear fan from time to time.
I've read messages on the net that suggest this is a hardware failure of some kind. What I'd like to know is if there is any easy way to know what hardware has failed. Nearly all the messages I read talked about three beeps. This is four.
Makes no diff if I am running it from AC or battery.
I have no idea what makes it start working again.
I suspect (just a suspicion) that it tends to stop working after it has been moved around (i.e. picked up and moved to another desk etc.).
Any suggestions would be appreciated.
Also, is there a Toshiba diagnostic tool I can download and run that will test the machine out?
Thanks,
Jonathan

Coincidentally, I had a similar problem last night on my old S3000 laptop. I popped out a PCMCIA card while the laptop was powered up and it just hung. I rebooted it, and I got a few series of beeps and nothing else.
After a lot of swearing. I thought I remembered something about holding down keys at power up on laptops to get them working. I powered down, pressed and held the "esc" key, then powered up. The laptop recovered, displaying a "safe boot" mode. I selected "boot from hard disk" and it seems to have been fine since...
Hopefully that might help.

Satellite 1410-604 - BIOS update Incorrect BIOS update in the web?

Hi there again!
Now with a new and weird matter.
We all know that old say... "If it is not break, don't fix it". And if you put it into more informatic terms, "specially if it is a BIOS".
Yes, we all know that the BIOS is something quite dellitate to handle. For some reason we normally feel like if we were handling something like nitro-glycerine, or some radioactive product. And this is because we all know what is being put in risk in that moment: our (or sometimes others) computer, the full system could end as dead as some pieces of metal, plastic, and wires.
Well. I passed through all of that more than ten times in my life, and only once it went wrong. But since that old motherboard was already dead, It was not important. But I allways was EXTREMELY care. I allways cross checked everything before doing anything, allways got a backup and a way to restore that backup... and allways did this in COMPAQ systems, that were prepared that way. Updating a BIOS was just about preparing a disk, turn on the PC with the disk in the diskette drive, and wait. And if you didn't like the results, you simply click "return to previus BIOS" and that was it... very nice. And easy.
Few days ago, a friend brought me a Toshiba Satellite 1410-604 to solve some issues that were driving him crazy. After removing an expired Norton Internet Security, install avast and scan, I found more than one hundred files infected with a wide variety of virus, malware, trojans, and whatever you could imagine. Avast removed them all, but the remains of the operating system was so unstable that we decide to format and install from scratch.
I asked for the restoration disks, that obviously he don't have because they were lost in one of his movings. After we got the confirmation from Toshiba reps that there are no recovery disk available for this model, because it is too old, we decided to install from scratch like any other normal PC, and resigned to loose some of the utilities that come with that CDs and that are not available for download in the website.
I downloaded all of the software available for this model, including two BIOS updates. (Actually only one update, but in two versions: Windows and Traditional), and prepared a CD with all the drivers and programs just like if it were a brand new system install. And everything went very well, no problems at all. Until we got to the Wireless LAN card, but that is another issue that is already solved (the mini PCI card for the WLAN does not support WEP or WAP encription, and it is not possible to connect to any wireless LAN encripted).
At this point, and when I started configuring and enabling PCMCIA devices, and USB devices (this computer only supports USB 1.1 not 2.0) I discovered this text in the Toshiba Website:
"This Bios Update adds increased functionality to your system.
(BIOS is an acronym for Basic Input and Output System. This program is stored in a Read-Only Memory chip on the motherboard.
When the computer powers up, the BIOS is launched to perform various start-up functions.)
For detailed update information please refer to Toshiba BIOS-Update Information"
(you can find this here:
[http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU] you have to look for:
Archive
Satellite
Satellite 14xx
Satellite 1410-604
PS141E
Quite specific. Isn't it?)
According to the information in that same website, the BIOS available fits the following models:
"Satellite 2410-414, Satellite 1410, Satellite 1410-654S, Satellite 1410-814, Satellite 2410-303, Satellite 2410-304S, Satellite 1410-354, Satellite 2410-601, Satellite 1410-401, {color:#ff0000}*Satellite 1410-604*{color}, Satellite 2410-404, Satellite 1410-301, Satellite 1410-304, Satellite 2410-S403, Satellite Pro 2100, Satellite 1410-S203, Satellite 2410-304, Satellite 1410-554, Satellite 1410-S102, Satellite 1410-354E, Satellite 2410-703, Satellite 1410-303, Satellite 2410-S203, Satellite 1410-801, Satellite 2410-603, Satellite 1410-902, Satellite 1410-313, Satellite 1410-802, Satellite 1410-714, Satellite 2410-354, Satellite 2410-514, Satellite 1410-614, Satellite 1410-704, Satellite 2410-515, Satellite 2410-504, Satellite 2410-702, Satellite 1410-S103"
Yes... it's there!
Now, when you go to the "Toshiba BIOS-Update Information", you get:
"FAQ Ref.: TRO0000000b07
A BIOS update is a {color:#ff0000}*relatively simple operation and can be carried out by most competent computer users*{color}. All BIOS upgrades can be obtained from "BIOS Update" Download Section click here..
Note: The BIOS files are machine specific so the correct BIOS for your machine must be used."
Please note that Toshiba does not disencourage the handling of BIOS, on the contrary: they even encourage people to do so. This is not necessary bad, but at the same time they encourage people to 'play around' with such a delicate matter, at the end of that same page, in little letters they say:
"Toshiba provides this information "as is" {color:#ff0000}*without warranty of any kind*{color}, either expressed or implied, including, but not limited to, the implied warranties of merchantability or fitness for a particular purpose. Toshiba shall not be responsible for the topicality, correctness, completeness or quality of the information provided. {color:#ff0000}*Toshiba is not liable for any damage caused by the use of any information provided, including information that is incomplete or incorrect*{color}."
This should trigger yellow alarms in our minds.
+"Human error is inherent to humans, and it is not possible to erradicate. It will allways appear, sooner or later" (Prof. James Reason).+
And finally I made the mistake. Even though I read that warning, I remembered all those successfull BIOS update with COMPAQ, and relied in Toshiba. That update was available there, and Toshiba was telling me that it was for this computer. Great!
So finally I unplugged all devices (USB), removed the PCMCIA (WLAN),plugged the battery charger to avoid any possible battery problem, restarted windows, and then from within windows I started the updater (windows version, as recommended by Toshiba). Everithing looked fine, nothing different of what I used to see on those old COMPAQs.
As warned by the updating program, the system was going to reboot. And actually it did so.
Windows closed quite normally (a bit quicker than normal, but without errors, and since there were no other programs than the essentials -even the antivirus was not running-), the computer switched of, all lights off (normal), and then it switched on again...
{color:#0000ff}*BEEEEEEEEEEEEP... BEEEP... BEEEEP...*{color}
OMG! I never espected something THAT bad. 3-1-1!
And now... What a 3-1-1 stands for here? Award BIOS would mean no video card or deffective video card, but it is not true, since it was working up to 20 seconds ago. It must be the BIOS.
It never came again to life. It is still beeping 3-1-1.
But now comes the investigation of the human-factors involved in this accident.
I found I commited the following failures:
*(1)* To rely in the manufacturer, even though they WROTE their information could be wrong or incomplete. (BAD if I were a QA&QC inspector).
*(2)* I didn't cross checked deeply enough (until it was already too late).
*(3)* I didn't looked previously for the way to make a backup of the BIOS, in order to restore should anything go wrong.
*(4)* Let Toshiba lead me to a path I didn't want to walk, just because of their offer of "increased functionality".
*(5)* Beleave in Toshiba when they said "relatively simple operation and can be carried out by most competent computer users"... they never said it is failproof.
Then I started the most interesting part of the investigation.
{color:#0000ff}*"What went wrong?"*{color}
Obviously, the BIOS update failed somehow, somewhere. And I wanted to know what and where.
First thing I discovered was that there are another search engine in Toshiba called "askiris" ([http://askiris.toshiba.com]) and I looked there in order to see if for any chance I could get the old 1.20 BIOS version that was installed originally in that machine.
And I found something... VERY interesting:
bq. {color:#800080}*From: * \\ {color}{color:#800080}* ACPI Flash BIOS version 1.10 for Satellite 1410/1415/2410* \\ {color}{color:#800080}* bios for these models. TAIS. Downloads. DL. 105481 289838 289838 ACPI Flash BIOS version 1.10 for Satellite 1410/1415/2410. 2002-10-04. 105589...* \\ {color}{color:#800080}* Published 10/4/02* \\ {color}{color:#800080}* From: * \\ {color}{color:#800080}* ACPI Flash BIOS version 1.40 for Satellite 1410/1415/2410/2415* \\ {color}{color:#800080}* FDD Version 1.30 TAIS. Downloads. DL. 105481 357972 357972 ACPI Flash BIOS version 1.40 for Satellite 1410/1415/2410/2415. 2003-01-31. 105589 PUB...* \\ {color}{color:#800080}* Published 1/31/03 | Rating:* \\ {color}{color:#800080}* From: * \\ {color}{color:#800080}* ACPI Flash BIOS version 1.20 for Satellite 1410/2410* \\ {color}{color:#800080}* error message during BIOS TAIS. Downloads. DL. 105481 305240 305240 ACPI Flash BIOS version 1.20 for Satellite 1410/2410. 2002-11-01. 105589 PUB...* \\ {color}{color:#800080}* Published 11/1/02 | Rating:* \\ {color}{color:#800080}* From: * \\ {color}{color:#800080}* ACPI Flash BIOS version 1.30 for Satellite 1410/1415/2410* \\ {color}{color:#800080}* 1) Changed the content TAIS. Downloads. DL. 105481 330963 330963 ACPI Flash BIOS version 1.30 for Satellite 1410/1415/2410. 2003-01-03. 105589...* \\ {color}{color:#800080}* Published 1/3/03 | Rating:* {color}
Those are: V110, V140, V120 and V130 for series 1410/15 and 2410.
GOOD! Or not?
Let's take a look:
First thing I did was download everything all four files.
Then I took the same version that made the crash: 1.40
Than I uncompressed the file, and I found:
06/05/2009 00:17 <DIR> .
06/05/2009 00:17 <DIR> ..
31/01/2003 08:38 1,605,632 11410v14.iso
31/01/2003 08:38 511,764 1370D14.EXE
{color:#ff0000}*08/01/2003 17:03 724,480 2410a9v140.exe*{color}
09/01/2003 09:32 250,663 biofca9t.com
08/10/2002 05:26 30,697 chgbiosa.exe
31/01/2003 08:36 1,087 instinfo.bat
13/05/2002 15:25 378,175 launcher.exe
31/01/2003 08:36 433 launcher.ini
06/05/2009 00:17 0 list.txt
31/01/2003 08:36 14,768 readme.com
*{color:#ff0000}31/01/2003 08:36 12,513 readme.txt{color}*
11 archivos 3,530,212 bytes
3 dirs 9,404,600,320 bytes libres
And I got my first surprise here: There is a {color:#ff0000}*README.TXT*{color} that was not present in the file I downloaded previously from the drivers repository.
So I went to the readme.txt and I found this:
"README.TXT 01-31-2003 CDC
Flash BIOS version 1.40 for Satellite 1410
This BIOS is applicable to the following models:
Satellite 1410-S105
Satellite 1410-S106
Satellite 1410-S173
Satellite 1410-S174
Satellite 1410-S175
Satellite 1410-S176
Satellite 1415-S105
Satellite 1415-S106
Satellite 1415-S115
Satellite 1415-S173
Satellite 1415-S174
Satellite 1415-S175
Satellite 1415-S176
Satellite 2410-S203
Satellite 2410-S204"
Please note that the model 1410-604 is *NOT* listed.
I thought "well, it must be another archive..."
But then I realized of a name that sounds familiar, it was there, in the directory where I uncompressed this 1.40 file, and the name is:
{color:#0000ff}*2410A9V140.EXE*{color}
So I took the other file, the BIOS_Win update, and I discovered that the file name is:
*{color:#0000ff}2410A9V140.EXE{color}* (Ups!)
So I uncompressed it again, to find:
El volumen de la unidad D no tiene etiqueta.
El n£mero de serie del volumen es: 8838-E175
Directorio de D:\Shared\diskette\2410A9v140
06/05/2009 00:43 <DIR> .
06/05/2009 00:43 <DIR> ..
*{color:#0000ff}09/01/2003 09:32 _250,663_ BIOFCA9T.COM{color}*
17/07/2002 03:38 35 biosupd2.ini
13/07/2001 13:22 6,277 chgbios2.vxd
*{color:#0000ff}08/10/2002 04:26 _30,697 _CHGBIOSA.EXE{color}*
09/11/2001 09:14 134 clean2.reg
17/07/2002 03:35 342,064 install2.exe
16/07/2002 06:55 241,664 nchgbios2.exe
18/08/2001 11:41 3,435 nchgbios2.sys
23/10/2001 18:55 11,476 nchgbios2NT.sys
26/08/2001 09:00 49,152 nchgbios2svc.exe
13/07/2001 17:05 49,152 tbdecode.dll
14/03/2002 06:42 49,152 TCHGBIOSInfo.dll
21/06/2002 11:25 1,796 tosclean2.bat
09/11/2001 12:01 967 tosclean2.pif
21/06/2002 11:34 1,841 toscleanAUTO2.bat
21/06/2002 11:44 1,796 toscleanSMS2.bat
21/06/2002 08:51 2,038 tosntclean2.bat
21/06/2002 08:51 2,084 tosntcleanAUTO2.bat
21/06/2002 08:52 2,038 tosntcleanSMS2.bat
20 archivos 1,046,461 bytes
2 dirs 9,402,793,984 bytes libres
No readme file...
Then another question arised in my mind: What about the other 1.40 file? What does the other 2410A9V140.EXE have inside?
This:
El volumen de la unidad D no tiene etiqueta.
El n£mero de serie del volumen es: 8838-E175
Directorio de D:\Shared\diskette\comparacion_toshiba\askiris\241 0a9v140
06/05/2009 00:46 <DIR> .
06/05/2009 00:46 <DIR> ..
*{color:#0000ff}09/01/2003 09:32 _250,663 _BIOFCA9T.COM{color}*
17/07/2002 03:38 35 biosupd2.ini
13/07/2001 13:22 6,277 chgbios2.vxd
*{color:#0000ff}08/10/2002 04:26 _30,697 _CHGBIOSA.EXE{color}*
09/11/2001 09:14 134 clean2.reg
17/07/2002 03:35 342,064 install2.exe
16/07/2002 06:55 241,664 nchgbios2.exe
18/08/2001 11:41 3,435 nchgbios2.sys
23/10/2001 18:55 11,476 nchgbios2NT.sys
26/08/2001 09:00 49,152 nchgbios2svc.exe
13/07/2001 17:05 49,152 tbdecode.dll
14/03/2002 06:42 49,152 TCHGBIOSInfo.dll
21/06/2002 11:25 1,796 tosclean2.bat
09/11/2001 12:01 967 tosclean2.pif
21/06/2002 11:34 1,841 toscleanAUTO2.bat
21/06/2002 11:44 1,796 toscleanSMS2.bat
21/06/2002 08:51 2,038 tosntclean2.bat
21/06/2002 08:51 2,084 tosntcleanAUTO2.bat
21/06/2002 08:52 2,038 tosntcleanSMS2.bat
20 archivos 1,046,461 bytes
2 dirs 9,402,781,696 bytes libres
*{color:#ff0000}They both have 20 files, and 1,046,461 bytes. I asumed they are both the SAME file{color}*.
And the readme file does not list the model 1410-604 in its readme file, therefore I cannot explain this except as a mistake from Toshiba. *{color:#ff0000}They put an incorrect BIOS in their website, and suggested the update, and somehow leaded to this kind of errors.{color}*
(Except in the case that one of those models is a different name of the 1410-604 model, and if it is the case... now I don't know why this BIOS do not work with this computer).
The worst part is that neither of those other files (V1.10, 1.20 and 1.30) lists the 1410-604, therefore there seems no possible workaround for this problem. I need an original v1.20 for this CMOS, and Toshiba seems not to have it. They offered me to solve the problem, by leaving the notebook at an ASP, and paying only 95€ for the work and about 280€ for a motherboard replacement, I will get it solved. But they offer no warranty of their possibilities because is a model 'too old' and 'discontinued' and with 'no support'...
In other words, they said "don't bother with this, just go out there and buy a new one" (something absolutely out of my scope in this crisis-time) :P
Thank you for reading soooo far.
Now what I need is to get any ideas of a workaround for this, my ideas are:
(1) This CMOS has a boot-part that still works (it allows a roll-back if you have the appropriate file). So I need a good BIOS to burn into the CMOS, from the VERY SAME model (a BIOS backup) but the backup must be adequate for the burning program (CHGBIOSA.COM).
(2) It is still possible that the BIOS could be OK but the data on the CMOS got somehow corrupted. If so, clearing the CMOS could solve de problem. But I was not able to find a clear cmos button from outside, and after disasembling I took of the battery, with no good results. I have to try leaving the MOBO without battery for longer period (I left it about 20 seconds) just in case 20 seconds don't allow all the capacitors to fully go to zero values. I have not much hope in this point.
(3) Try to get a REAL good update from Toshiba. I contacted several times technical support, and I was able to verify they are only phone-operators, with a script in front of them, and when the problem goes-out-of-scope they fall always in the same answer: "you have to go to an ASP". I still have a low hope to find someone who really knows a bit, and could enlighten with a good BIOS to put in this disks.
(4) As far as I could find, this BIOS is not from any known BIOS-maker. It seems it has been developed by Toshiba (own brand), therefore the Crisis Recovery Disk from Phoenix will not be of any help here. As well as any other BIOS recovery tool not designed for Toshiba's BIOS. But I'm open to any ideas, that could be tested more or less safely. (Remember that the 'BIOS-BOOT-PART' feature is still working, I don't want to loose this only possibility of redemption).
Wwwaaaaoooowww... what a long-post falks! Sorry for that!
Forgive me, but I wanted to be really clear.
Should anyone give some hints or advice, will be greatly appreciated.
Please don't say what I shouldn't do... I already know that. I already researched and already found my mistakes, in order not to repeat them. Now I need to move on, to advance, and to try to solve this, or at least learn how to solve similar things. As much as possible.
Thank you again, in advance, and sorry again.
FenixDigital
Message was edited by: Fenix_D
Changed subject to beter reflect what is the matter about (apparently erroneous BIOS file in Toshiba download center).

Well. 
 
It's not dead, certainly. 
 
The steps that I put in my procedure were: 
 
--> There are two memory sims, that I am going to identify as M1 and M2 
--> There are two memory banks, that I am going to identify as A and B 
 
Next step in order to identify if there are some module or bank that is not working properly are: 
 
The modules were installed as: 
 
M1 --> A 
M2 --> B 
 
1--> Boot without any memory chip. 
 
<blockquote>
A--> X 
B--> X 
</blockquote>
 
2--> Boot with ONE module 
 
<blockquote>
A-->M1 
B-->X 
</blockquote>
 
3--> Boot with the OTHER module 
 
<blockquote>
A--> X 
B--> M2 
</blockquote>
 
4--> Boot with BOTH modules swapped: 
 
<blockquote>
A--> M2 
B--> M1 
</blockquote>
 
5--> Boot with ONE module swapped: 
 
<blockquote>
A--> M2 
B--> X 
</blockquote>
 
6--> Boot with the OTHER module swapped: 
 
<blockquote>
A--> X 
B--> M1 
</blockquote>
 
At this point I got a great difference. It booted, finally. But in order to make a diagnostic, I have to complete the full test, and the results were: 
 
1--> Boot without any memory chip. 
 
A--> X 
B--> X 
 
NOT BOOTING Actually the computer not even tries to read the disk. Only the power led turns on, but even prior to press the 'on/off' button. I think this indicates 'no memory installed'. I would have expected a post failure beeps, but there were no beeps at all. 
 
2--> Boot with ONE module 
 
A-->M1 
B-->X 
 
BOOTED NORMALLY Well. This obviously means that the 3-1-1 beep code means memory error, or one bank failing of two installed. Now I didn't know if the problem was the module, or the bank B. 
 
3--> Boot with the OTHER module 
 
A--> X 
B--> M2 
 
NOT BOOTING Just like the condition in 1. Like no memory installed, therefore there are two possibilities: The bank B is not working, or the memory module M2 is not working. 
 
4--> Boot with BOTH modules swapped: 
 
A--> M2 
B--> M1 
 
NOT BOOTING Just like previous to test condition. Beep code 3-1-1, no boot at all. 
 
5--> Boot with ONE module swapped: 
 
A--> M2 
B--> X 
 
NOT BOOTING This was the important test, because it finally let me determine that the problem is at the module 2 (M2) not at the bank B. But still there could be a failure IN THE BANK B and IN THE MEMORY MODULE 2. Have to do the other test. 
 
6--> Boot with the OTHER module swapped: 
 
A--> X 
B--> M1 
 
BOOTING NORMALLY This really confirmed there is nothing wrong with ANY bank, but one of the modules is not working, actually is not being even detected. This is quite weird, because this computer was working perfectly with those two modules, and in the moment of the BIOS upgrade it seems to fail... How come? 
 
Something weird happened here. I don't know what, but something ruined one memory module (fortunately only one), what I would like to know now is what happened. But at least I have the machine running, with very low memory, but running. 
 
What I am thinking now is what about this BIOS upgrade makes the motherboard not to recognize one of the modules for some reason? 
 
<img class="jive-emoticon" src="images/emoticons/happy.gif" border="0" alt=":)" /> 
 
I will continue my research, but certainly the memory made the difference. 
 
I am not sure why I didn't discover this before, I think I didn't perform this test before, for two reasons: 
 
(1) I tried to boot with no memory, and this was impossible, so I assumed that the problem was not at the memory. 
 
(2) When I heard the beep code (3-1-1), somewhere I read it was a video problem, and I asume most probably it was a video problem (since no video at all was being displayed) but I should have take into consideration that Phoenix BIOS also means with the same 3-1-1 a DMA problem (memory problem). 
 
Okis... It's a pitty having to wait so much between a post and it's approval. I posted my answer two days ago, and since it didn't appear, I believe It didn't upload, so I replied again, and also didn't appeared... until now. It is obvious that a moderator approval is required. That's why I have to wait 24 hours or more to read my post. This slows this forum effectiveness. 
 
Thank you very much for your help. I'll keep you informed. Until we get to a final diagnosis and solution.

Satellite P500 - After BIOS update the number pad isn't working anymore

I just got a Satellite P500 and am running Windows 7. I downloaded all of the latest drivers and updated the system bios to version 1.70 (from Toshiba's support website). Now, my number pad on the keyboard is not working.
The numlock light is on and when I hit the "6" key on the number pad, it turns the light on/off but the behavior of the other keys does not change whether it is on or off. The "-" key enters a "6" but none of the other keys (except "enter" does anything.
I removed the keyboard driver and restarted to re-install the keyboard driver but that had not effect. The keyboard did work for a few days after I flashed the bios but seems to have stopped since I started using a USB mouse. I tried uninstalling the USB mouse driver but that did not do anything either (it was a Logitech driver).
Anyone have any ideas? Thanks in advance

I'm having this exact same issue, Did the BIOS update, which fixed the problem for Vista X64, formatted the machine to windows 7, Number pad keys except 6 and - Register as the Fn Button, Bringing up the function shortcuts display when pressed in windows, recovered from 7 to Vista X64 using Built in recovery partition, Problem still exactly the same. i have reset BIOS to defaults twice now, which has not resolved the issue. the next step will be to reflash the bios with the update again to see if this will fix the issue as it did once before. Laptop Model P500/025 Or Part number PSPE8A-025002
*EDIT: I reflashed the BIOS with 1.70 Again and the number pad is back to normal. Seems like an extreme fix for a silly problem. Every time you format you have to Reflash your bios, risky no?*
Message was edited by: Matrixion

Satellite A300 - After BIOS update black screen

Hello all,
I just applied the BIOS update on my Satellite A300. After the update successful, the system does a reboot. Now when I try to power it up I get no display, I can hear the hear running, the CD Drive reading the DVD, led blinking.
The Toshiba ASP tolled me (phone call) the mainboard should be replaced after a unsuccessful bios update, but it's very expensive for me, :(
Please can you tell me if they are any way to fix it without mainboard replacement? The bios is a Insyde and according to the website the bios has bios [Recovery Technology|http://www.insydesw.com/press/2008/press_060308.htm]. I guess that the ASP doesn't know that.
Please can you tell me how to start the recovery procedure if it's possible (key combination?),
Any help about fixing the laptop without mainboard replacement will be much appreciated.

There are cases when the chip that containes the bios is removed from the motherboard and with a memory writing device (special to do this) it is posible to rewrite the bios(in my country, Romania it is not possible at the Toshiba Service, they change the motherboard wich cost 400-500 euro, but there are guys in electronics who do things like this...).
This is the happy case to rewrite, when this is possible. But there are exceptions when you can't do anything and you have to change the motherboard.(bad bios update coud burn your entire motherboard or several components /parts).
In what I've read " For example, on other manufactures PC compatible systems with Award BIOS and AMI BIOS there is dedicated small area, often about 8 kiB or so, called bootblock which starts first" , if your bios si from award or ami they have lets say a small progam which starts first, checks if bios is oki then is booting normal , if not it tries to recover it and boot.
In your case this is not possible even if you have the specific computer with that kind of bios because the screen doesn't start.
*Your case is simillar to mine* so you could hope that your video card is broken and not your motherboard.
My advice to you is to go to the service and diagnostic the problem and see what is the solution.

Satellite M40X: After Bios update keyboard keys don't work properly

I have a Satellite M40X and I had update the Bios to v. 1.60 and now the keys u, m, 7 and the arrow up are not working properly. The problem is that there is not other Bios version to use.
How can I resolve my problem?
Can I recover the old bios version?
Thanks
Gabriel

Hi there,
no you wont be able to recover the old BIOS. The only two options are:
1. Retry the BIOS update and check if its working
2. In case of no success, please visit the [ASP Locator|http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT] to search for the nearest ASP in your country and to ask them for a hardware checkup and repair.
Greets

Satellite Pro A60 - BIOS update without OS

I have an Satellite Pro A60, trying to install XP pro but says it needs update BIOS, have downloaded new upgrade, unzipped and only one file there, will not boot as no bootable file.
There currently is no OS on the laptop, I understand i need an ISO file but where is it..!!..

Hi vespec,
I think PinkPanther has already read the thread and you should take the time to to read his posting too.
As he wrote, the BIOS update is Windows based. That means you have to install Windows firstly before you can start the update. If you unzip the files, they will not boot because they are not bootable. You cant start the update without Windows.
Last but not least as PinkPanther wrote, a DOS based update that you can boot from, is only available for ASPs I think.
But it would be interesting to know which error message you get exactly while installing XP. I cant imagine that BIOS update is necessary to install the OS. BIOS has nothing to do with that
And have you tried to install the OS from Toshiba recovery disk? This should work properly because it contains an image of factory settings.

Satellite L - After BIOS update it won't start up again

I just got an email saying there was a BIOS update for my laptop. It started to install but my computer shut down and won't start back up
PLEASE HELP!!!!!!!
The update was: ACPI Flash BIOS version 1.90 for Sat/Sat Pro L355D/L305D (PSLE0U, PSLC0/1U)

Hello
And what Satellite notebook you have exactly? Is your notebook designed for this update or is it another model?
After a failed BIOS update you can try this workaround: Remove the AC/DC adaptor and battery then wait one hour. After this connect the AC/DC adaptor and battery again. Now try to start the notebook again.
If the notebook doesnt start you need help from a notebook technician. Therefore contact the nearest authorized service provider. They can help and will try to reflash the ROM module I think or the mainboard must be exchanged.
Greets

Satellite A210 PSAFGC - Bios update to get rid of blank screen issue

I also have the blank screen problem and I would like to update my bios from the 1.30 version it came with.
The problem I have is that I have a model A210 part number PSAFGC.
The support bulletin 98082422 for the Bios update doesn't mention my part number exactly and I can't find anything for my model.
The 2 updates are to 1.70 and 1.90. I have read the text from both of these and they seem quite different.
Not sure what to do. Here is the bulletin info.
Resolution:
Update the computer's BIOS to fix this problem, by clicking the appropriate link for your computer model from the following list.
- Satellite A210 / A215, Part No. PSAFGU: BIOS version 1.70
- Satellite A210 / A215, Part No. PSAEGU and PSAELU: BIOS version 1.90
- Satellite Pro A210 / A215, Part No. PSAFHU: BIOS version 1.70
- Satellite P200D / P205D, Part No. PSPBLU and PSPBQU: BIOS version 1.40
he computer's Part No. is printed on a label on the underside of the case.
Any help??

Hi
The Satellite *A210 PSAFGC* series seems to be a Toshiba *Canadian* series and I would recommend checking the Toshiba Canadian driver page if you want download the compatible BIOS for your notebook.
Here the link to the page:
http://support.toshiba.ca/support/download/ln_bymodel.asp
Best regards

Satellite Pro L300 BIOS update problem

Hi
I've an Satellite Pro L300 (PSLBHE).
I downloaded the new bios file and started the upgrade. A window appeared and showed the old and new bios version (v1.70 -> v2.20). About in 1 min. my laptop screen turned to black but HDD green light flashed and didn't anything about 15 mins. After I pushed the power button and the laptop shutdown. Now if I push the power button nothing happen just blank (black) screen and the HDD flashing light.
What's the problem? What can I do? Please help me.
gjon

Problem is that BIOS update is screwed up now. Obviously BIOS update was interrupted and now the BIOS chip is damaged.
What you can do now?
Unfortunately not much. What you need is professional help so I recommend you to contact nearest Toshiba service and ask for help. Sorry.

Satellite A205-S4629 BIOS Update Fail - File has different BIOS part number

I have used the Toshiba support download page to identify my model A205-S4629 Satellite laptop and downloaded the following BIOS update utility sa200f0v520.exe.
After building the IOS install disk and running the Phoenix Phlash16 utility I get the following message "File has different BIOS part number".
The utility is using the following image file MW10M520.ROM.
Any input is appreciated,
Thanks,

Hi
As far as I know the BIOS package downloaded from the Toshiba US driver page contains the WinRAR 32-bit self-extracting ZIP file which includes both Windows-based and diskette based BIOS update installation options.
Did you try to update the BIOS using Win-based BIOS?
What OS do you use?

Satellite L300-03C - BIOS Update to V2.2 then Fail to boot on XP

L300-03C BIOS Update to V2.2 then Fail to boot on XP
Model:PSLB8C-03C01X
Please help
My OS is WinXP SP3 , BIOS was v1.4
using the latest BIOS V2.2 windows file to upgrade(from v1.4)
The progress is normally finished , however it fail to boot up.
I still can enter BIOS Setup , but can not run Windows XP to login screen.
So , what I can do?
Thank you

Hello
Did you load the default settings in BIOS after update?
So press F9 key in BIOS setup and save the settings.
Does it work?

Satellite 3000-X11 bios updated

Similar Messages

Maybe you are looking for