Satellite 4030 CDT display doesn't fill screen

I have a 4030CDT running Windows ME. The display doesn't fill the sceen . I have updated from Toshiba website to give the latest display driver but display settings cannot be changed from 16bit colour & 640x480.
Any ideas what I've done wrong?

Thanks . I've found one on driverguide.com.Just going to download it now .Hopefully all will be solved. I'll let you know. I intend to use the old 4030 when I'm working away from home..not very often.Hopefully I'll succeed & won't have to invest in a new laptop.

Similar Messages

  • Display doesn't fill screen (Black square around)

    Hi, thanks for reading.
    Y restarted my computer and noted that there is a black space between the border of the display and the screen. Is the same problem in this post: http://discussions.apple.com/message.jspa?messageID=7175451
    I already try to restart the PRAM and the NVRAM, change the resolution and disable the universal access.
    Even when i boot the gray screen (with the apple) doesn't fill the screen.
    Can anyone help me please?

    Try the following; in /Library/Preferences find the file com.apple.windowserver.plist and throw it in the trash. Find also in /Users/yourusername/Library/Preferences/ByHost the file com.apple.windowserver.xxxxxxxx.plist where xxxxxxx is a string of letters and numbers and yourusername is the name on the main user account and throw that in the trash, too. Then restart and see if the wide screen function returns.

  • Resolution doesn't fill screen

    My new i5 mac mini says it's using my monitors full resolution 1920x1080 but it doesn't fill the screen.
    Using thunderbolt to VGA adapter.
    1600x1200 fills screen but is ugly.
    Any help would be appreciated.

    The native resolution my display is 1080p Full HD 1920X1080 60Hz I use it with the macbook unibody and the mini displayport / VGA Adapter I didn´t test it with the new mac mini

  • White boot screen doesn't fill screen

    I'm not sure when this started happening, and it's not too big a deal, but now, when my unibody 17" MBP boots, the white boot screen looks like a 4:3, low-res image with black bands on the sides. Basically, it doesn't fill the screen like it used to.
    I have plugged it into a projector using the Mini Display Port to VGA adapter. Might that have something to do with it? Is there any way to fix it?

    Try resetting the computer's PRAM, by rebooting and holdiing down the options-command-P-R keys all at once. Let the computer reset and chime a couple of times, and then release the keys and allow it to boot normally.

  • Display doesn't fit screen now. Black bar an inch wide on right side of screen on Satellite L655

    The right side of my screen has a blacdk bar about an inch wid.  It is like the display ends an inch before it actaully does on the right hand side.  Also the taskbar is below the bottong of my screen and I cannot see it.  I have tried to adjust the screen resolution and every other option the control panel offers but nothing changes it.  The last time I had my laptop on it was fine.  I turned it on yesterday and have had it shut down and restarted multiple times and every time since yesterday afternoon the screen is showing wrong.   How do I fix this issue?

    I know this is an old thread, but hopefully you'll get my message.  Did you ever sresolve this problem?  I have exactly the same issue. Thanks, Kevin

  • HT204291 Mirroring Doesn't fill screen

    When mirroring, my ipad2 display only fills  up about  half of the screen.  When looking at the "apple tv" screen,  the whole screen is filled.  Is this a settings issue somewhere on my Ipad or maybe on my LCD projector??

    Thanks for your quick response!!   Is there any way to change the 4:3 ratio on my ipad?    I'm messing around with presenting stuff to my chemistry classes using the Ipad and by not using the whole screen, some of the stuff is tough to read for kids farther away.      If I had a newer LCD projector (mine is 8 yrs old), would I be able to set that projector to a 4:3 ratio (probably not a fair question).  Anyhow,  just want to maximize my projected screen size, so any other advice you have would be greatly appreciated!!

  • Display doesn't fit screen

    I just bought a new MacBook 13 and transferred everything from my MacBook Pro 15" using Migration Assistant.
    So many things in the display don't fit the screen area. I've looked all over for a way to adjust this in "preferences" but see nothing. Even email is half hidden.

    Are you sure that this isn't a one-off migration problem, with applications remembering their window size from your old, bigger, screen? You can test this by moving the window so you can see the bottom-right corner, then dragging this to resize the window so it fits the screen. If the application subsequently works OK then that's your answer.
    I think that you can also test this theory by clicking the green + icon on the window (top left). If that 'corrects' the window then again I think it means that the window just has a remembered size that's bigger than your new screen.
    Best of luck.

  • Safari Display doesn't cover screen

    My Safari displays in Portrait in the middle of the screen. I need it to display in landscape and cover the whole screen when I'm on the internet.

    I am confused. Can't you click on the edge of the window and drag it?

  • Satellite A105-4094 display issue - only half screen

    So my screen is half displaying, its a compressed version of the full screen.
    The right half of the screen is lit, but all black, and right after the halfway point on the left side there is a strip of image then a strip of black before seeing the compressed image.
    The output works fine to an external. I know its not the video card. I reinstalled the updated Bios, and i tried using powerstrip.
    I'm pretty sure its a software issue as in system devices my display is shown as Digital flat panel with a max res of 1024 x 768 but the native is 1200 x 800 and it used to be called something else like toshiba laptop internal monitor.
    No drivers have fixed the issue and i can't find a similar problem anywhere!
    Anyone have any ideas what this could be?
    It used to do this, and a restart would sometimes fix it, but now its just stuck like this.
    If you need pics i can take screen shots later, but i dont have it available right now...

    I had a similar problem with my previous laptop.
    Does it happen in the BIOS and at the Toshiba logo as well? If it does, that would rule out a software/driver problem since Windows wouldn't be running at the time.
    If it happens in the BIOS as well:
    -Try resetting the BIOS to its defaults
    If it happens only in Windows:
    -Update the display drivers.
    -Disable extended/clone desktop in the Display Settings in Windows.

  • Satellite P100-119: display doesn`t work anymore

    Hi all,
    after resetting my notebook and installing the printer driver from the Epson homepage suddenly the graphic of my display was looking strange. I decided to start the laptop new. But then the display didn`t turn on either. Just the LED lights surrounding it were on but the display kept black.
    Trying all to find a button for switching the display on and off brought the small result that the display worked again for a few days and then suddenly with a new start the same problem again. I decided to connect it with an external display and to open the BIOS. I managed to start the safe mode of windows and tried to renew all the drivers.
    Suddenly the external display switched off and the laptop display switched on again. I restarted the laptop without external display and everything was ok - but just till the next day - now the problem is ongoing and I can just start with an external display in the safety mode.
    Maybe one of you knows about the problem or can even help me. I would bring it to a service but at the moment I don`t have that much money for buying a new one or even repair it. At least it would be good to know in case what the repair costs might be...
    Thx a lot to all who answer

    no, not on the notebook screen, just on the external display which i connected to the notebook. but when i want to start the laptop normal without external the display keeps black with the light at the edge of the screen.
    And when I want to start it normal with the external diyplay, the external display suddenly turns off. It just works with the safety mode.

  • HT201335 Hi.  I have an apple tv and am able to mirror the image on my ipad to my tv, however it doesn't fill the full screen.  Is there a way to get a full image on my 32" Tv.  Thanks a lot for your help

    HI.I have an apple TV and am able to mirror the image on my ipad onto the screen.  However, it doesn't fill the full 32" screen.  Is there some way to project a bigger image onto the Tv.  Thanks for your help

    Welcome to the Apple Community.
    Mirroring won't fill the TV screen. The iPad has an aspect ratio of 4:3 and the iPhone 4S or prior an aspect ratio of 3:2, neither of these will fit exactly into a TV screen which as an aspect ratio of 16:9. The Apple TV will not zoom the mirrored image, because it may well cut off information which is situated at the top or bottom of the screen.
    You may wish to try each of the settings in ‘Settings > Audio & Video > Adjust for AirPlay overscan’ for the best setting that suits you.

  • The picture from my AppleTv on my Samsung LCD TV doesn't fill the entire screen.  It is only a strip across the screen

    The picture on the screen when viewing movies on Apple TV on a samsung lcd screen is only a strip across the screen and doesn't fill the entire screen.  Any settings suggestions?

    If you can get to the settings on the AppleTV attempt to adjust the resolution settings to something more appropriate.
    This may help
    https://www.apple.com/support/appletv/essentials/

  • Hit something when editing presentation and now slides are all reduced in size and not filling screen.  Preferences, scale to fit doesn't work.  What did I do?

    Hit something when editing presentation and now slides are all reduced in size and not filling screen.  Preferences, scale to fit doesn't work.  What did I do?

    Please give complete details of your system and the media and the project properties.

  • Color Calibrator can't work properly due to display not filling screen.

    I have a Thinkpad W520 with the HD 1920x1080 display and the color sensor. I tried to run the Color Calibrator application but it always runs to completion but cannot process the measurements. So I opened the lid in the middle of a calibration and discovered that the color screen that is supposed to be viewed by the sensor is not full screen, thereby preventing the sensor from measuring the color. How can I set the graphics so that this app will display full screen when it runs? Thanks.
    Solved!
    Go to Solution.

    Yes I am. But I just solved the problem. I had adjusted my display to show text, icons, etc at 150% of normal resolution. Somehow it was causing the application to display only a partial screen. I set the magnification to 125% and now the color calibrator works fine.

  • Creating support message field reported by doesn't fill

    Hi colleagues,
    When I create a support message field reported by doesn't fill automatically.
    I think that I've completed all required steps in order these fields were filled automatically. Fields sold-to party and support team are filled automatically, they work ok.
    The steps that I've checked:
    - The support message is created successfully from satellite message(SID=DES_01). The user which creates this message is zprueba5 exists with profiles: SAP_ALL, SAP_NEW at the satellite system.
    -In the solution manager system(SID=SMG), transaction ib52 for the satellite system is filled with partners: employee responsible, sold-to party and system administrator.
    - In the solution manager system(SID=SMG), zprueba5 exists with profiles: SAP_ALL, SAP_NEW.
    - Transaction bp, zprueba5 user contains BP roles: Business Partner, Employee, Bill-To Party, Financial Services and at the tab "Identification":
    External BP Number: SMG 010 ZPRUEBA5
    ID Type     Description                         Identification number
    CRM001    External System Identifier   DES_01 0020281686 100 ZPRUEBA5
    CRM001    External System Identifier   SMG 0020276689 010 ZPRUEBA5
    So, In the solution manager system(SID=SMG), crm_dno_monitor transaction when I open the support message just created from satellite system, I have an error because reported by field isn't filled.
    Please could you help me?
    Thanks and Regards
    Raul Aguilar

    Hi Nikhil,
    At this message I'm going to reply your last two replies.
    1.- You typed me "In ib52 select both the system simultaneously and then go to->parner and assign proper bp no for the respective partner function. You need to do it for every system may be users are same.
    I hope you have maintained proper access sequence i.e. via ibase."
    For each SAP System that I've defined at SAP Solution Manager, at ib52 transaction I've defined the three roles that IMG activity documentation types:
            Assign business partners with the following functions to the new iBase component systems:
                Administrator
                Key User
                Sold-to Party
    SAP Solution Manager Implementation Guide->SAP Solution Manager(SP 17)->Configuration->Basic Settings->Standard Configuration of Basic Settings->Solution Manager->iBase->Assign Business Partners to iBase Components ->transaction Change iBase (IB52), enter in field Installed Base '1' and I select the SAP System->Goto -> Partner
          Function                                        Partner      
        00000014  Employee Responsible     298
        00000001  Sold-To Party                  295
        SLFN0001 System Administrator      295
    2.- You typed me  "Select you partner determination procedure and double click on "User interface setting" here select appropriate partner functions and assign all of them in ibase as I said in above reply.
    You must not be getting reported by partner function. Take out System administrator. Motivate by assigning points."
    My Partner Determ. Proc. is SLFN0001, so I double click on User interface setting like you explained me, adn now appears:
    Header Screen:
    Sequence and Functions for (main) Partner Displayed
    Partner Function1 00000001  Sold-To Party (CRM)
    Partner Function2 SLFN0002 Reported by (CRM)
    Partner Function3 SLFN0003 Support Team (CRM)
    Partner Function4 SLFN0004 Message Processor (CRM)
    But now I don't understand if at ib52 transaction I've to add any role or if from "User interface setting" I've to delete any Partner Function. Could you detail me when you type "You must not be getting reported by partner function. Take out System administrator", please?
    Regards,
    Raul .

Maybe you are looking for