Satellite 5200-903: cooling problem error message

few minutes after booting my Satellite 5200-903 (xp home sp1)an error message apears: "Problem with the cooling system, shut down your system and send it to the service" (it's a free translation from German..) I installed a temperature checking tool, the software shows cpu temperature of about 60C, however I do not hear the fan..
Can someone help?

Hi
You have a good chance that it's only a cooling module.
Generally such warning message appears because the CPU cooling module cannot cool the CPU properly or it doesn't work.
However, the best way is to contact the Toshiba service partner in your country. Ask the guys for the opinion and I'm sure you will get a proper answer.
Good luck

Similar Messages

  • Satellite 5200-903: Problems with Fn-F5 and middle cpad button

    Hi,
    i updated my Win XP Home to Win XP Pro and installed all the toshiba goodies from the Homepage. Two things don't work as expected though:
    * Fn-F5 doesn't cycle through the available monitors
    * the middle cpad button cannot be used as a middle mouse button
    Don't know why Fn-F5 doesn't work, all the other Fn-Keys work as expected. They show the OSD, too. Fn-F5 doesn't show the OSD and no function :/
    About the cpad button: I tried the driver from the toshiba site and from synpatics.com
    The problem is: in the control panel i can choose functions for each button. The function "middle mouse button" is available for the left and the right button, but not the middle one. And it is not recognized as middle mouse button, but as PageUp.
    Any ideas? The notebook is a Satellite 5200-903.
    Thanks for your help.
    Ataraxis
    Message was edited by: ataraxis

    Hello Ataraxis
    First of all I must tell you that Satellite 5200 is a great unit. If I found one that costs not much money I will buy it.
    To your issues:
    As far as I know if you want to use FN+F5 key combination you must install TOSHIBA Hotkey Utility for Display Devices V2.1.0.0-1. I hope that this tool is installed properly. If you want you can try to install it again.
    I am not 100% sure but I think that this small button in the middle has no the same function like middle button as a middle mouse button and it will be used to start sPad launcher. If you want you can check it in Users manuals. I didnt read it but I hope that there you can find a proper explanation about functionality of this small button.
    Good luck!

  • Cooling Fan Error Message & Computer Shut Down

    Hello,
    I have a 2 1/2 Satellite running W7 and recently started having a problem, receiving a Cooling System error message which tells me to shut down the computer immediately.  I did and left it off to cool, then started it up again.  Less than 5 minutes later, same message and the computer shut itself down.  The fan starts normally, then becomes burdened, then stops.  Is this actually fan related or hard drive related?

    Hello Peter,
    I already have the new BIOS you sent me.  The problem persists.  Toshiba has no Authorized Service for computers where I live (Brazil) as far as I can see on their site, which I can't understand since it is a global company.  So, I can not use my business computer now.  Apparently, I either have to ship it to the States (which will cost me more than the computer is worth, and I'm better off buying a new one of a brand that takes care of its customers globally), or I have to try and find someone here who thinks they might be able to discover the problem and fix it.  Any suggestions?

  • Satellite 5200-903: Mini PCI Card doesn`t work

    Hello,
    I am a user of an:
    Satellite 5200-903: P4-M 2.2/256+256 DDR/60GB/15T SXGA+/DVD-R-RW/nV FX 5600/cPad/WIFI ready/XP
    My computer is equipped with an Toshiba Wirless lan Mini PCI Card.
    I installed the card a few years ago - everything worked wonderfull.
    At the beginning of 2006 I installed a new operating system (XP Pro + SP1, same system as before) because it was necessary.
    I installed all driver for the W-Lan Card, obviously the card worked in the correct way (no driver incompatibility or other problems).
    But, and thats the reason of this topic here. It isn`t possible to connect my card to any Hot Spot. I tried it with 2 different access points, but the result is the same. "No connection Point found".
    Has anyone any idea what to do or in which direction I could look for the failure? Is there maybe any special Software necessary (I couldn`t remember, that in my last installation I had needed special driver or software)
    If further informations are necessary, please inform myself.
    (sorry for the terrible english, but it isnt my first language.)
    THX for your help

    Hi,
    thx for the hints. But unfortunately none of these solved my problem.
    1. I checked my device Manager, it`s shown a Toshiba Wireless LAN Mini Pci Card
    2. The device is activated, with no problems
    3. My wireless activation switch on the left notebook side is activated (led lights yellow)
    4. Pushing the Fn+F8 Button results nothing
    (wenn i press the combination during the Notebook switch is off - i got the message "wireless connection is deactivated, please activate")
    What have to happen, when pushing the Fn+F8 Button during the wireless switch is activated? Is there any message on the screen?
    Concerning the installed driver, how could I check what type of card is installed in my notebook. I know, that there a two types of driver and card existing, toshiba and atheros.
    But, if the installed driver causes no problems I guess the right driver is installed.
    Thx for any further Idea...
    C.

  • How to install wireless on a Satellite 5200-903?

    Due to a very bad virus I recovered Windows on a Satellite 5200-903 of a friendly businessman. But back home he saw: no wireless LAN could be used... It seems, that cause the WLAN-switch was "off" no WLAN-driver was installed/recovered...
    Now he wants to come to me again tomorrow or the day after tomorrow - and I MUST know, how to install everything until then... he also will bring me his router, so I can configure everything for him on the notebook AND router (WPA, if possible).
    But I found TWO drivers: one was a direct download of a small file of "Agere" - wlesslan-xp-7620390.zip
    The other is from "Atheros", and the download is a links to another website "Toshiba EMEA - Wireless LAN Driver Portal" http://aps2.toshiba-tro.de/wlan/?page=downloads , where I have to identify the WLAN adapter... But: on the first download-site (I mean BEFORE redirected to "Toshiba EMEA") there is at the list "Model" NOT any Satellite 5200.
    Which driver is correct? Are there different WLAN-adapters in the 5200-903 series? Is it possible to find out the adapter model BEFORE he gives me the Notebook?
    And in the list of drvers for the 5200-903 there was a download "WLAN hotkey" wlkey-xp-2003.zip ? Do I need that too? Do I need any other things?
    And does such an "older" WLAN-Access work in another way than the integrated WLAN of a centrino e.g. ? I just know how to log into a WLAN with newer notebooks: button "wireless networks" on the right buttom oft windows, then chose the WLAN name to connect and type in the key, if needed.
    Please help me, he lives 100 miles away from me and has not much time, he comes again to me just for that matter, and of course he was not amused when he returned home and couldn't connect to the internet... and he's an ABSOLUTE noob in technical things, so I cannot tell him how to do it on his own and need your help quickly.
    Thanks a lot!

    Hello Herb
    I just want to make the whole story short and simply. After installing OS install drivers for hardware components. According the notebook specification for Satellite 5200-903 it is WLAN ready model and I do not know which WLAN card is inside. You friend should have info about that.
    If there is Atheros WLAN card the right driver you can find HERE
    After driver installation install all Toshiba designed tools and utilities starting with COMMON MODULES. It must be installed at first. WLAN-hotkey utility is important because using FN+F8 key combination you can enable/disable WLAN card.
    WLAN software (Atheros WLAN client utility) is not necessary because for WLAN you can use WXP WLAN settings. You can use it if the WLAN card is activated properly.
    So I hope you will set WLAN properly and if you need more assistance please write again.
    Bye and good luck!

  • MacBook 2006 w/Snow Leopard; HP B210 printer; print problem; error message: One or more components of the HP printing software are corrupted or missing. Reinstalled software but Mac will not cause printer to print.

    ? MacBook 2006 w/Snow Leopard; HP B210 printer; print problem; error message: "One or more components of the HP printing software are corrupted or missing..." Reinstalled software but Mac will not cause printer to print.  My MacBook Pro works fine with same wireless printer.

    Hi ArielAce , thanks for getting back to me!
    I would recommend downloading and running the HP Print and Scan Doctor.
    Please keep me posted!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • DVD Studio burning problem error message: "remove the VIDEO_TS folder from the Build Location"; where is build location

    DVD Studio burning problem error message: "remove the VIDEO_TS folder from the Build Location"; where is build location?

    Thanks Shane I followed your instructions and it turned out pretty well. One quick question, Im working with DVD Studio Pro 4, how do i implement a theme into my project? I cant even fin where thay are located. Thanks.

  • Satellite 5200-903: Display is out of order, how much costs the repair?!

    Hello Everybody.
    As I wrote in the Headline, the Display of my Notebook Satellite 5200-903 is broken. The Display:
    * Size : 15,0 ''
    * Type : SXGA+ TFT
    * Resolution : 1.400 x 1.050 pixels
    * colour depth : 16,7 Millionen
    * Lochmaske (HxV) : 0,2175 x 0,2175 mm (dont know the right english word)
    * DEdiagonal : 15,0
    * Contrast : 150:1
    * reaction time (rise/fall) : 20/30 ms
    * LCD Brightness Steps 1-8 : 6-9-14-24-41-75-130-150
    Can someone tell me what the repair roughly will cost? I'm not sure if the repair is not to expensive for the old Notebook.
    Hope you can help me. Thanks for some answer.
    My regrads
    JumpinJack
    btw: I'm sorry for my bad english

    Hi
    Well, sorry but I cant give you a proper answer for your question.
    The fact is that the notebook screen is a expensive notebook part.
    You should contact the Toshiba service partner in your country and ask him for the replacing costs.
    Furthermore I have found this page where you can find the compatible screen.
    http://www.lcds4less.com/ToshibaLaptop__Toshiba_Satellite_5200-903__laptop-screens.html

  • Logitech Headset 30 and Satellite 5200-903

    Hello,
    i want to use a logitech headset usb30, but it don't work with the Satellite 5200-903. What can i do? The operating system is Windows XP with SP2. When i connect the headset with a usb-port, it doesn't run.
    Thanks for any Answer or Tip

    Hello
    I don`t know if there is some software that must be installed but you should check all Sounds and Audio devices properties. Please check also the Volume control if there is option mute activated.
    Volume control dial at the front side of your notebook should also not be set to minimum level.

  • Satellite 5105-S702 Touch ED error message during bootup process

    When I bootup my Satellite 5105-S702 laptop with the Computer Associates (CA) Anti-Virus software v8.4.0.24 turned ON, I receive the following error message near the end of the bootup process:
    TouchED Error
    Retrieval of THotkey" failed
    Occurred Part - TouchED.exe - THotkeyFindProc( )
    Failed Function - FindWindow( )
    Error Code - 0x00031402, 0x00000002
    However, when I turn OFF the CA Anti-Virus software and reboot the laptop, I do not get the error message.
    Therefore it would appear that the CA AntiVirus software is causing this error message.
    Would appreciate if anyone could advise if they have experienced this problem with this model laptop, or the Satellite 5105-S701, or the equivalent European model 5100-603, and how they rectified it.
    Thank you
    AlanCB

    Hi
    I agree with you.
    In my opinion the installed (CA) Anti-Virus software is not fully compatible with the Toshiba Hotkey Utility or the Anti-Virus software doesnt recognize it correctly and cannot handle it.
    CA Anti-Virus software is not known to me but maybe you could set some setting to ignore the Toshiba Hotkey Utility.
    Maybe it helps if not I would recommend contacting the Computer Associates support team.

  • How to fix "server problem" error message when trying to use PhoneGap build service.

    I have a site that is now optimized for mobile devices and want to use the PhoneGap Build service in Dreamweaver CS6 to make a native app.  Unfortunately, I keep getting the "We seem to be having server problems." error message when I try to create a new project.  I did notice that the configuration file was created at the site root.  I've seen a few other similar threads on this, but no solution.  I've checked on any firewall issues (none) and know that the PhoneGap server is not down.  The problem is on my end.
    Thanks,
    Loren

    Not an answer to the server problem, but I have posted the PhoneGap Build process here: http://forums.adobe.com/message/4669054#4669054. It might help anyone still having problems.

  • Upgrade/install/uninstall problems, error messages etc.

    After upgrading to version 7 everything seemed to be fine for a while then out of the blue I got this message:
    Error writing to file C:\Program Files\iTunes\iTunes.Resources\ko.lproj\iPodHelpchm. Verify that you have access to that directory
    I am an admin on this computer, hadn't made any changes lately.
    After some searching online, I tried uninstalling... iTunes uninstalled but Quicktime is still causing problems. I get similar error messages (2330) when trying to uninstall quicktime.
    Now I can't get either to reinstall or uninstall!
    I'm really frustrated, version 6 worked great for me.
    I get this error message when trying to delete the iTunes and quicktime folders from Program Files: "Data Error (cyclic redundancy check)"
    The programs appear uninstalled except these folders cannot be deleted. I have opened the folders and deleted everything inside that I could delete without receiving the same error message... but I'm still left with files on my computer and still cannot reinstall the latest iTunes/quicktime properly.
    This seems to be the step that is preventing any of the previously suggested fixes for my iTunes problems on this forum from working.
    I've been watching and waiting on a fix for this for months. I finally switched to an iTunes alternative for windows users, but I do miss my iTunes. I used to shop the iTunes store frequently but after this I don't know... I'm ready to give up!
    Does anyone have any new insight on this???
    Dell Inspiron 5100   Windows XP  
    Dell Inspiron 5100   Windows XP  
    Dell Inspiron 5100   Windows XP  

    thank you kindly for the detailed information.
    Error writing to file C:\Program Files\iTunes\iTunes.Resources\ko.lproj\iPodHelpchm. Verify that you have access to that directory
    2330s citing language resource folders (you seem to be having trouble with one of the Korean ones) are typically caused by damaged files, or disk damage in the area of those files. i'd lean towards the disk damage possibility given the "Cyclic redundancy check" message.
    so first let's try running a chkdsk over your C drive. see:
    How to perform disk error checking in Windows XP
    does the chkdsk find/repair any damage? if so, do you still get the 2330 next time you try an install?

  • Audio configuration problem error message

    I have just upgraded to version 7.1.1 and when I try to open it the following message appears
    i tunes cannot run because it has detected a problem with your audio configuration.
    I have tried returning to the old version, but that just comes up with the error message 200.
    I relly would appreciate any help with this

    Quick Time need to be reinstalled. Uninstall QuickTime and then download and install QuickTime using the QuickTime standalone Installer.Be sure to select the second option that Does Not Include iTune.

  • ITunes 8.2 download problem error message

    Am running windows vista and logged in under administrator account. Tried to download itunes 8.2 both from a "clean install" (deleted existing itunes files, temp folders, uninstalled all versions of itunes and quicktime) and with my existing itunes software but getting an error message "could not access network location %APPDATA%\.
    PS. If there is a problem with itunes 8.2 and not my PC, anyway to get an older version of itunes back on my pc?
    HELP...
    Message was edited by: CurtisG

    First thing to check is QT's compatibility mode setting, as explained here
    http://support.apple.com/kb/TS1875

  • ITunes problem - error message

    Okay, so I've had a new laptop and I've downloaded iTunes because I have an iPod and need everything to be agreeable. When I open iTunes, I get the error message that says, 'iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly'. I don't know what is causing this.
    And also, I've been moving songs over from the desktop and when I try to authorise a song that I've purchased from the iTunes Music Store, it tries to access the Store and then I get the error message that says, 'We could not complete your iTunes Store request. The network connection timed out. Make sure your network settings are correct and your network connection is active, then try aagain'. I'm connected to thr internet fine, and can do everything else, but not just this. I can also access the iTunes Music store separately of this, just nor for track authorisation. Any help would be greatly appreciated!

    I've found some article that may help you:
    iTunes for Windows doesn't open after upgrading
    http://docs.info.apple.com/article.html?artnum=302386
    iTunes for Windows won't open if firewall software is not up-to-date
    http://docs.info.apple.com/article.html?artnum=302775
    iTunes won't open or unexpectedly quits
    http://docs.info.apple.com/article.html?artnum=42963
    You may also need to uninstall/reinstall:
    How to uninstall QuickTime on a Windows PC
    http://www.info.apple.com/kbnum/n60342
    Removing iTunes For Windows
    http://www.info.apple.com/kbnum/n93698
    If you have issues uninstalling iTunes, you might find this useful:
    Microsoft's Windows Installer CleanUp Utility:
    http://support.microsoft.com/default.aspx?kbid=290301
    Hope this helps

Maybe you are looking for

  • Sending nested structure in PostLVUserEvent

    Hi All, I getting an exception when calling a c++ dll which has PostLVUserEvent to trigger the LabVIEW event structure. This dll has typedef stuct as described below (nested structure type), the same data structure is sent using PostLVUserEvent to th

  • Embedding external swf file flash.

    Hi,      I have 1 swf file which generated through 3rd party tool. Now I want to embed this file into empty flash file and want to save as new, I tried with following options, 1) import option ( File > Import ) but it is importing only Images and sym

  • Blue screen on start up!    What to do?

    I have an external USB hard drive connected.  When I restart the MacBook Pro, I end up seeing a blue screen and nothing happens.  If I disconnect the USB cable, press the start button again, it will restart. I can plug in the USB cable in and the har

  • Un-Deletable ds_  File

    I found a ds_.... type file on my desktop after opening a spreadsheet. When I tried deleting the file, it came back as soon as I clicked the "empty trash"  menu. I tried opening it to see what it is, but got a message there was no app  associated to

  • Replace the hard disk has, and also have lost the OS disk.

    Replace the hard disk has, and also have lost the OS disk. Reset on my computer to install the program instantly, Is there any way? Thank you.