Satellite 5200-903: Display is out of order, how much costs the repair?!

Hello Everybody.
As I wrote in the Headline, the Display of my Notebook Satellite 5200-903 is broken. The Display:
* Size : 15,0 ''
* Type : SXGA+ TFT
* Resolution : 1.400 x 1.050 pixels
* colour depth : 16,7 Millionen
* Lochmaske (HxV) : 0,2175 x 0,2175 mm (dont know the right english word)
* DEdiagonal : 15,0
* Contrast : 150:1
* reaction time (rise/fall) : 20/30 ms
* LCD Brightness Steps 1-8 : 6-9-14-24-41-75-130-150
Can someone tell me what the repair roughly will cost? I'm not sure if the repair is not to expensive for the old Notebook.
Hope you can help me. Thanks for some answer.
My regrads
JumpinJack
btw: I'm sorry for my bad english

Hi
Well, sorry but I cant give you a proper answer for your question.
The fact is that the notebook screen is a expensive notebook part.
You should contact the Toshiba service partner in your country and ask him for the replacing costs.
Furthermore I have found this page where you can find the compatible screen.
http://www.lcds4less.com/ToshibaLaptop__Toshiba_Satellite_5200-903__laptop-screens.html

Similar Messages

How to install wireless on a Satellite 5200-903?

Due to a very bad virus I recovered Windows on a Satellite 5200-903 of a friendly businessman. But back home he saw: no wireless LAN could be used... It seems, that cause the WLAN-switch was "off" no WLAN-driver was installed/recovered...
Now he wants to come to me again tomorrow or the day after tomorrow - and I MUST know, how to install everything until then... he also will bring me his router, so I can configure everything for him on the notebook AND router (WPA, if possible).
But I found TWO drivers: one was a direct download of a small file of "Agere" - wlesslan-xp-7620390.zip
The other is from "Atheros", and the download is a links to another website "Toshiba EMEA - Wireless LAN Driver Portal" http://aps2.toshiba-tro.de/wlan/?page=downloads , where I have to identify the WLAN adapter... But: on the first download-site (I mean BEFORE redirected to "Toshiba EMEA") there is at the list "Model" NOT any Satellite 5200.
Which driver is correct? Are there different WLAN-adapters in the 5200-903 series? Is it possible to find out the adapter model BEFORE he gives me the Notebook?
And in the list of drvers for the 5200-903 there was a download "WLAN hotkey" wlkey-xp-2003.zip ? Do I need that too? Do I need any other things?
And does such an "older" WLAN-Access work in another way than the integrated WLAN of a centrino e.g. ? I just know how to log into a WLAN with newer notebooks: button "wireless networks" on the right buttom oft windows, then chose the WLAN name to connect and type in the key, if needed.
Please help me, he lives 100 miles away from me and has not much time, he comes again to me just for that matter, and of course he was not amused when he returned home and couldn't connect to the internet... and he's an ABSOLUTE noob in technical things, so I cannot tell him how to do it on his own and need your help quickly.
Thanks a lot!

Hello Herb
I just want to make the whole story short and simply. After installing OS install drivers for hardware components. According the notebook specification for Satellite 5200-903 it is WLAN ready model and I do not know which WLAN card is inside. You friend should have info about that.
If there is Atheros WLAN card the right driver you can find HERE
After driver installation install all Toshiba designed tools and utilities starting with COMMON MODULES. It must be installed at first. WLAN-hotkey utility is important because using FN+F8 key combination you can enable/disable WLAN card.
WLAN software (Atheros WLAN client utility) is not necessary because for WLAN you can use WXP WLAN settings. You can use it if the WLAN card is activated properly.
So I hope you will set WLAN properly and if you need more assistance please write again.
Bye and good luck!

Satellite 5200-903: Problems with Fn-F5 and middle cpad button

Hi,
i updated my Win XP Home to Win XP Pro and installed all the toshiba goodies from the Homepage. Two things don't work as expected though:
* Fn-F5 doesn't cycle through the available monitors
* the middle cpad button cannot be used as a middle mouse button
Don't know why Fn-F5 doesn't work, all the other Fn-Keys work as expected. They show the OSD, too. Fn-F5 doesn't show the OSD and no function :/
About the cpad button: I tried the driver from the toshiba site and from synpatics.com
The problem is: in the control panel i can choose functions for each button. The function "middle mouse button" is available for the left and the right button, but not the middle one. And it is not recognized as middle mouse button, but as PageUp.
Any ideas? The notebook is a Satellite 5200-903.
Thanks for your help.
Ataraxis
Message was edited by: ataraxis

Hello Ataraxis
First of all I must tell you that Satellite 5200 is a great unit. If I found one that costs not much money I will buy it.
To your issues:
As far as I know if you want to use FN+F5 key combination you must install TOSHIBA Hotkey Utility for Display Devices V2.1.0.0-1. I hope that this tool is installed properly. If you want you can try to install it again.
I am not 100% sure but I think that this small button in the middle has no the same function like middle button as a middle mouse button and it will be used to start sPad launcher. If you want you can check it in Users manuals. I didnt read it but I hope that there you can find a proper explanation about functionality of this small button.
Good luck!

Satellite 5200-903: Mini PCI Card doesn`t work

Hello,
I am a user of an:
Satellite 5200-903: P4-M 2.2/256+256 DDR/60GB/15T SXGA+/DVD-R-RW/nV FX 5600/cPad/WIFI ready/XP
My computer is equipped with an Toshiba Wirless lan Mini PCI Card.
I installed the card a few years ago - everything worked wonderfull.
At the beginning of 2006 I installed a new operating system (XP Pro + SP1, same system as before) because it was necessary.
I installed all driver for the W-Lan Card, obviously the card worked in the correct way (no driver incompatibility or other problems).
But, and thats the reason of this topic here. It isn`t possible to connect my card to any Hot Spot. I tried it with 2 different access points, but the result is the same. "No connection Point found".
Has anyone any idea what to do or in which direction I could look for the failure? Is there maybe any special Software necessary (I couldn`t remember, that in my last installation I had needed special driver or software)
If further informations are necessary, please inform myself.
(sorry for the terrible english, but it isnt my first language.)
THX for your help

Hi,
thx for the hints. But unfortunately none of these solved my problem.
1. I checked my device Manager, it`s shown a Toshiba Wireless LAN Mini Pci Card
2. The device is activated, with no problems
3. My wireless activation switch on the left notebook side is activated (led lights yellow)
4. Pushing the Fn+F8 Button results nothing
(wenn i press the combination during the Notebook switch is off - i got the message "wireless connection is deactivated, please activate")
What have to happen, when pushing the Fn+F8 Button during the wireless switch is activated? Is there any message on the screen?
Concerning the installed driver, how could I check what type of card is installed in my notebook. I know, that there a two types of driver and card existing, toshiba and atheros.
But, if the installed driver causes no problems I guess the right driver is installed.
Thx for any further Idea...
C.

Satellite 5200-903: cooling problem error message

few minutes after booting my Satellite 5200-903 (xp home sp1)an error message apears: "Problem with the cooling system, shut down your system and send it to the service" (it's a free translation from German..) I installed a temperature checking tool, the software shows cpu temperature of about 60C, however I do not hear the fan..
Can someone help?

Hi
You have a good chance that it's only a cooling module.
Generally such warning message appears because the CPU cooling module cannot cool the CPU properly or it doesn't work.
However, the best way is to contact the Toshiba service partner in your country. Ask the guys for the opinion and I'm sure you will get a proper answer.
Good luck

Logitech Headset 30 and Satellite 5200-903

Hello,
i want to use a logitech headset usb30, but it don't work with the Satellite 5200-903. What can i do? The operating system is Windows XP with SP2. When i connect the headset with a usb-port, it doesn't run.
Thanks for any Answer or Tip

Hello
I don`t know if there is some software that must be installed but you should check all Sounds and Audio devices properties. Please check also the Volume control if there is option mute activated.
Volume control dial at the front side of your notebook should also not be set to minimum level.

Downloading and installing the iOS5.0.1 Following problems occured: with my iPhone 4s: Phone calls are dropping out in UAE, how to solve the problem?

Downloading and installing the iOS5.0.1 Following problems occured: with my iPhone 4s: Phone calls are dropping out in UAE, how to solve the problem?

You're not speaking to Apple on in this forum, nor will someone from Apple see this post. We are just users like you and I.
Have you tried to restore or reset your phone?
Or contact your carrier in re: to your sim card

HT201303 Do any of you apple geniuses out there know how to retrieve the answers to your security questions or at least reset them? Apparently its to much for the support team. Can't get an answer out of them...

Do any of you apple geniuses out there know how to retrieve the answers to your security questions or at least reset them? Apparently its to much for the support team. Can't get an answer out of them...

Reset Security Questions
Frequently asked questions about Apple ID
Manage My Apple ID
Or you can email iTunes Support at iTunes Store Support.
If all else fails:
Go to: Apple Express Lane;
Under Product Categories choose iTunes;
Then choose iTunes Store;
Then choose Account Management;
Press Continue;
Now choose iTunes Store Security and answer the bullet questions, then click Continue;
Sign in with your Apple ID and press Continue;
Under Contact Options fill out the information and advise iTunes that you would like your security/challenge questions reset;
Click Send.
You should get a response within 24 hours by email.
Presently there appears to be problems on Apple's end, so it may be quite some time before they respond.
Another user posted the following:
I got some help from an apple assistant on the phone.
It is kind of round about way to get in
Here is what he said to do and it is working for me...
1) on the device that is asking you for the security questions go to "settings", > "store" > tap the Apple ID and choose view"Apple ID" and sign in.
2) Tap on payment information and add a credit/debit card of your preference then select "done", in the upper right corner
3) sign out and back into iTunes on the device by going to "settings"> "store" > tap the Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you should be asked to verify your security code for the credit /debit card and NOT the security questions.
4) At this time you can remove the card by going back in to edit the payment info and selecting "none" as the card type then saving the changes by selecting "done". You should now be able to use your iTunes store credit without answering the security questions.
It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
Good Luck friends!

I have recently purchased the highest storage but was unable to backup my phone via icloud, the button on my mphone to backup on icloud is grey out, anyone knows how to resolve the problem? What's the point of purchasing the biggest storage?

i have recently purchased the highest storage but was unable to backup my phone via icloud, the button on my iphone to backup on icloud is grey out, anyone knows how to resolve the problem? What's the point of purchasing the biggest storage?

First check that your device is correctly connected to the wifi/internet (settings > wifi)
If your back up continually fails, you might try turning off back up on your mobile device (settings > iCloud > storage & backup) and then deleting the backup file from iCloud by swiping the backup file on the mobile device (settings > iCloud > storage & backup > manage…) and then turning back up on again.
If this doesn't help, try turning off some items for back up in a pattern to try to establish if your problem is being caused by specific data on your device.
Being able to back up to the cloud can be very useful, especially if you don't have access to a computer or have infrequent access to one, however unless you specifically need to use iCloud for back up, you will find backing up to iTunes significantly more convenient and possibly more reliable.
More about iCloud v iTunes Back Up

How much is the cost for replacing iphone 4 display?

how much is the cost for replacing iphone 4 display?

Apple will replace it, and the replacement comes with a 90-day warranty.
There are some legitimate, high quality repair centers that often can fix phones for less than replacement cost and offer at least 90 warranty...
Or maybe the OP knows that the broken display is not covered under warranty, which is why he was asking for the cost, but he still may have a warranty that just wouldn't cover him in this case.
The warranty is all or none. If the phone were damaged so as to void warranty coverage on the display, there is no remaining warranty on the rest of the device.

How much does the display move ?

This is a stupid question but how much can the display be moved ? All the pictures that I see it appears that the display is at an angle. Can the display angled down ( like if I put it on a cabinet ) ?

I can't find the actual numbers, but the display tilts I think about 10 or 15 degrees back from vertical, and a little less than that forward from vertical. At least mine is that way... the new ones may be a little different. I got mine last May.

Grouping Displays songs out of order

I was wondering why a grouping would be played out of order even though the tracks are in order with the rest of the cd?

oops, i meant, tracks are in order for the cd, and the grouping.

I bought iphone4 from istore in hongkong, now it is out of order can I exchange the new one or not

My iphone4 which I had bought from Hongkong. Now it was out of order. I-Store in Hongkong has any exchange program for me to exchange to new iphone
How to proceed it?

Pornnit wrote:
I have plan to Hongkong on August for 3 days so it will be possible to replacement n get the new one back
It is important to understand that the things you read here are not statements of official policy. For that you need to contact Apple, or their representatives in Hong Kong.
1.800.APL.CARE
The price for replacement in the United States is $129(USD). After international exchange rates, the HK price should be comparable.

Itunes 10.6.1.7 I have 2 sets of playlists the first set displays greyed out lists and does not work The second set is fine. How do I get rid of the non working set of playlists?

I have 2 sets of playlists in the sidebar of itunes. I have recently upgraded to 10.6.1.7 but this condition remains the same
The top list refers to greyed out listings and does not function
The list below works fine
How do I get rid of the "false" list?

I think the greyed out playlists must be listed from your device which is set up to mirror your library. Because the device is synced you can't edit content directly on the device. From the top of the left-hand column do you have?
Library > Music, Movies...
Store > iTunes Store, iTunes Match...
Devices > <Your Device> > Music, Movies, and all the other "dummy" lists...
Genius > Genius, Genius Mixes...
Playlists > iTunes DJ, and then all your playlist folders and playlists...
If so then that is perfectly normal when your device is connected, either directly or over wi-fi and you have the lists expanded. Simply click the small triangle to the left of the device name to hide all the playlists.
tt2

I have deleted a sales order,how to retreve the same document number

Hai,
I have deleted the sales order,so that document number is out.When i craete the next order will i get the same number which i have already deleted.
I want the same number again,for that what should i do...
I dont want that number be missed,the reason is there should be a flow in number,with out missing some numbers in between.
Thx
Venu
Edited by: venugopal on Aug 6, 2008 9:12 AM

Dear Venu
Yes this is possible but should not hand over the responsibility to end users.
B4 implementing this in production, please test a document and proceed.
Go to VOV8, select your order type and execute. There see what numeric value is maintained against the field "No.range int.assgt". Now go to VN01, [click on Status] tab and go to that number. On your right, you can see the last generated sale order number with editable option. You can change it.
For example, if your last created sale order reference is 805, you will see this 805 in the above area. Change it to 804 and save. Now if you create a new order, the reference of that particular sale order will again be 805.
But as I already mentioned, each and every time, you need to go and change this area which is not recommended.
thanks
G. Lakshmipathi

Satellite 5200-903: Display is out of order, how much costs the repair?!

Similar Messages

Maybe you are looking for