Satellite 5200 - Need master/slave patch for new DVD drive

I need a patch for DVD to use in a Satellite 5200.
My original DVD is broken, so i bought a Toshiba SD-C2512 DVD but it is not working inside the Satellite, but with adaptor at my Desktop PC.
I have to patch the DVD to Master.
Where can I get the file and prog to patch?

Hi
I think such patches that you mean are not available and as far as I know if you can switch a notebook from Master to Slave for example there is a jumper on the drive.
However, for me it sounds like that the drive is not compatible with this notebook. Not every drive is compatible with every notebook (e. g. pin assignment, ) ;)
You should buy another one and check the user manual. There you should find a list of compatible drives.
Bye

Similar Messages

  • Master Data Load for New Attribute

    Hi Users,
    We had to implement a separate load flow for a new field coming from R3. This field was to be added to existing master data object.
    I added a new Display attribute for an existing 0GL_ACCOUNT master data object.
    This new attribute along with some other existing fields is getting data from another master data object with an infosource in between because two transformations cannot be created for same source and target.
    When i load the data i dont see data being populated for this new field. I did ACR, checked the keys e.t.c.
    Source object has data but after executing DTP no data comes to this attribute. No routines or anything.
    Please suggest
    Regards
    Zabi

    Hi,
    The situation is:
    Field x from source maps to
    1. field y ( which was existing field ) and also maps to
    2. field z which is the new attribute.
    field y has to get updated for company codes 10 for example.
    field z for company codes 30.
    now if i use same flow and map field x to both y and z then there is overwriting happening if 10 does not have value for x and 20 has then its not good.
    So if i use a separate flow with infosource then i will map only x to z so after loads which means for 10 code if no value went in first dtp to y then if code 30 has value for x then z will only be updated and y remains empty....
    Master Data Load for New Attribute 

  • Satellite A200 - Need driver for CD/DVD drive

    Hey folks.
    Recently installed WXP Pro on my A200 PSAEC laptop, so I'm now dual booting XP and Vista on my laptop.
    Problem is, I've got all the drivers working on XP and everything's running perfect, but when I tried to burn a DVD, Nero says the recorder can't burn DVDs. In "My Computer" the drive shows as a DVD-RW drive, but when I insert a blank DVD, it says CD Drive. The drive shows up as "TCSDcor' CD/DVDW TC-L6#2D" in device manager. I've searched around for a driver, but can't find an exact match for that drive and there's no optical drive drivers on this Toshiba site driver section. The only thing I've found is an executable file for upgrading the firmware, but it throws an error saying it's the wrong drive.
    Anyone got any ideas?
    Any help would be greatly appreciated!

    Hi
    Toshiba European driver page provides three different firmware updates for Satellite A200 PSAEC series:
    TO02 for CD/DVD drive TS-L632
    TO02 - for CD/DVD drive TS-L632P
    (This firmware solves some problems of the optical disc drive.)
    TO03 - for CD/DVD drive TS-L632H
    (This firmware solves some problems of the optical disc drive.)
    Im not quite sure what TO0$ means but I think the sign $ is only a free variable parameter (place marker).
    If you want to check your current firmware then you could check it using the Nero Info Tool
    http://www.nero.com/enu/support-nero8-tools-utilities.html

  • I need an update for my DVD Drive HP & not rely on Microsoft

    I am having a HP DVD problem & i tend to disagree if ya say that my DVD drive (HP DVD RW AD-7586H)  needs replacing. My dvd drive works when it wants to (Has a mind of its own). The latest update for my DVD Drive is 21/06/2006 (7+ year old way out of date driver). Ive uninstalled my DVD Drive & re-installed after bootup & that didnt do nothing & i have used quite a few programs to update my driver (Driverbooster, DriverScanner etc) & there is never, ever an update for my DVD Drive via DriverBooster, DriverScanner or my HP Suppoort Assistant. EVER. If HP can give me a BIOS update, why dont you send me a DVD Drive update via me HP Support Assistant HP????  Well i think its a bout time HP should create an update to fix all DVD problems instead of relying on Microsoft to fix it. If my DVD Drive was Windows well i'd use the microsoft Fixits, but considering its a HP DVD drive , i think HP should fix the problem, not Microsoft.
    This question was solved.
    View Solution.

    What you see in divice manager is the control driver for the dvd drive, what you are really needing to look at is the firmware version on your dvd drive & see if a newer firmware is available.
    Generally a lot of faults even intermitant ones are more hardware than firmware, drives are very cheap though & a 2 minute job to replace if needed plus you can source a better quality drive & spec as desired.
    i think KH21 is newest firmware for that dvd drive.
    Like my post? Click Kudos (thumb+) to show appreciation.

  • I'm trying to download my Master CS6 onto a new hard drive because my old one crashed and I keep getting a message saying " Cannot write the file" or "I don't have permission to access the requested resource." ? What does this mean?

    I'm trying to download my Master CS6 onto a new hard drive because my old one crashed and I keep getting a message saying " Cannot write the file" or "I don't have permission to access the requested resource." ? What does this mean?

    Yes- it is a Mac. I went through adobes system requirements and re- downloaded supportive software. The notice seems to happen near the end of the down load with the messages above. I'll look into your suggestion. Thank you- appreciated.

  • My mac failed a month ago and apple needed to put in a new hard drive, which deleted everything. so, i need to put music from my iPhone to my iTunes library on my mac, please help?

    my mac failed a month ago and apple needed to put in a new hard drive, which deleted everything. i need to put music from my iphone to my itunes library, please help?

    Try these 2 User Tips...
    Syncing to a New Computer...
    https://discussions.apple.com/docs/DOC-3141
    Recovering your iTunes library from your iPod or iOS device
    https://discussions.apple.com/docs/DOC-3991

  • I want to put in a new DVD drive

    I just got this new DVD drive and i want to put it in my Power Mac G4 Quicksilver. Is that possible?

    Hi
    It should be possible, although you'll have to replace the existing optical drive, as the second bay can only accomodate 3.5" drives such as a zip drive.
    Installation instructions, including a QuickTime movie, can be found here:
    http://docs.info.apple.com/article.html?artnum=75314
    Removing the old drive just involves unplugging the ribbon and power cable, undoing four screws to remove the drive and carrier from the computer and undoing a further four screws to remove the drive from the carrier. Installation of the new drive is basically the reverse process. You'll also just need to make sure the jumpers on the back of the new drive are set correctly to master.
    You may want to make sure the drive is supported by the OS first though, with or without the help of PatchBurn:
    http://www.patchburn.de/

  • Need help figuring how to track DVD drive usage

    I work at a public library and need to track how often the DVD drives are used by our patrons.  Is there some count somewhere of how many times the drive is accessed?  The only other way I can think of to do this is to run a script that will check
    if any files exist at E:\ and then sleep for 1 minute and check again. Then, create a log in a central location that the script can update if the file exists. 
    Anyone able to come up with a better idea?  I would really appreciate any input.
    Thanks
    Tamara

    Yes, I am a technician.  I work at the library that I am attempting to collect this usage info from.  I just need to know how often our patrons use the drives because we may not offer the drives in the future and I would like to track a couple
    months of usage to determine how this will affect the patrons. 
    Yes, the PCs are very locked down, but since I am the one that locked them down, I can get the script to run.
    Thanks for the info about the event log.  I will work on a script to filter those events.  Seems like that would give me my answer!
    Thanks again for the help!
    Tamara

  • Installed new DVD drive, now iBook will not charge

    Hi guys,
    I'm a long-time Mac user, and this is the first time I've had any problems so I'm new to this board. I had a bit of a look around, both on this forum and the FAQs, and this appears to be a unique problem.
    Basically, for a while my iBook CD drive was spitting out CDs, as per a common problem which I was not able to resolve. Eventually the tray broke and it would not click back into place, and so I was left with an iBook with a CD tray constantly popped out.
    I ordered a new DVD drive/burner that claimed it would fit an iBook, and when it arrived I pulled apart my laptop and installed it. Everything appeared to be in order, until I tried to plug in the AC adaptor.
    The orange light goes on for about 10-15 seconds, then slowly fades away to nothing. If I unplug and plug it back in straight away, I get no light and no charge. If I wait 15 minutes, the orange light goes back on but once again fades after a short period of time.
    My first thought is that perhaps the DVD drive is incompatible/drawing too much power, but I can't figure out how this would affect the charger, and why the problem would persist whether the power is on or off.
    Has anyone encountered a problem like this? I don't hold much hope that this will be fixed without expensive surgery, but I'd like to try
    iBook G3, PowerPC G5, iPod   Mac OS X (10.3.9)  

    Hi Ronda, thanks for the response. I've pulled it apart a couple of times and have put it back together via the instructions I downloaded on the internet both times, and have had the same problem. To be honest, I can't answer that! I'll have to pull it apart this afternoon again to check.

  • OS 9 Driver for retrofitted DVD drive

    Hello,
    I have a dual CPU 533 mhz G4 with OS 10.4.10 installed. It will run classic mode and will also boot from OS 9.2.2, which is still on the hard disk.
    The machine has been retrofitted with a "Super Drive," possibly made by Pioneer. It reads and writes CDs and DVDs. "About this computer" won't give me the name of a manufacturer.
    The DVD drive works fine in OS X. Classic and OS 9 won't recognize it, though, presumably because OS 9 needs a driver for it.
    I want to run an application that won't work unless Classic or OS 9 recognizes the drive and finds the CD mounted on the desktop.
    What are my chances of finding a driver for the DVD drive and successfully installing it? How would I identify the right driver if I don't know the manufacturer of the drive?
    I thought about making a disk image of the CD, in OS X, then using that in place of the CD in OS 9 or classic. I couldn't figure out how to make an image, though. Disk Utility in OS X doesn't seem to have that ability. I might have an OS 9 utility that could do it, but OS 9 can't see the drive.
    Is that likely to succeed? If so, how to do?
    Thanks in advance,
    Tim

    Hey folks,
    Sorry about the late reply. I hope it gets noticed, somehow.
    "About this Mac" shows the following information about the drive:
    ATAPI DVD DD 2X16X4X16:
    Model: ATAPI DVD DD 2X16X4X16
    Revision: G7Z9
    Serial Number: 99B5C1520144445601SP
    Detachable Drive: No
    Protocol: ATAPI
    Unit Number: 0
    Socket Type: Internal
    The markings on the front of the drive drawer are strictly generic. I haven't removed it from the case, yet. That's sort of a hassle.
    Does this give any clues about how to ID the drive?
    Come to think of it, I don't really remember where this drive came from.
    Don Archibald wrote that the following items should appear in the OS 9 system folder.
    •Extensions Manager -
    Apple CD/DVD Driver
    •Extensions folder -
    Apple Photo Access
    Audio CD Access
    Foreign File Access
    ISO 9660 File Access
    UDF Volume Access
    All are absent. I guess that would explain the problem.
    I'll try to find these files and install them. I'll get back to you if it doesn't work.
    Thanks a bunch.
    Tim

  • Failed while scanning for CD/DVD drives, error 2355

    Failed while scanning for CD / DVD drives, error 2355.
    Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
    D: Unsupported CD or DVD drive.
    Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
    As far as I know I do NOT have a virtual drive on this pc.
    Any help???

    Failed while scanning for CD / DVD drives, error 2355.
    Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
    D: Unsupported CD or DVD drive.
    Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
    As far as I know I do NOT have a virtual drive on this pc.
    Any help???

  • Unable to burn cds. Have run diognostics. i tunes not running in safe mode. invalid lower filters registry value. Failed while scanning for CD/DVD drives, error 2500. Please help.

    Unable to burn CDs using i tunes. Have run diognostics.    Summary:-   i tunes not running in safe mode.
                                                                                                                                        Invalid lower filters registry value.
                                                                                                                                        Failed while scanning for CD/DVD drives, error 2500
    Please help.

    That's why you want to make a backup of the registry. If you didn't make a backup, use MS system restore to go back. The only values you should remove are UpperFilter or LowerFilter - one or both may be in there and can be removed. If neither value exists, then that is probably why you can't burn and Windows is not recognizing your drive as a writable drive.
    ... an HP employee expressing his own opinion.
    Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

  • Master/Slave settings for HD and SuperDrive

    i recently updated the hard drive to a 17" usb2 iMac flat panel, I upgraded the standard 80GB HD with a new maxtor 250GB disk, the problem is that the transfer rate from dvd/firewire/hd to hd are superslow.
    what i don't know is the jumper settings for the two units, i used slave for the superdrive and master for the hard drive, is it possible that they go inverted?
    thanks
    g

    I don't know if that's causing the low data rate, but Apple sets the superdrive to master and the harddrive cable select (see http://developer.apple.com/documentation/Hardware/DeveloperNotes/Macintosh_CPUs-G4/iMacNov03/index.html). I know from own tests that the 17" iMac G4 is capable of 50 MB/s for the internal HD.
    Mac mini G4 1,42/512/80, PowerBook G4 12" 1,5/1,25/80 + 23" ACD   Mac OS X (10.4.7)   as well as iMac G4 17" 1,25/2/320, PM G3 DT 500/576/20 + 17" Syncmaster 710T

  • Solaris 10 - patch for new DST 2007 changes

    I am trying to track down the one patch I need for the new standard for daylight savings time date changes that took effect in 2007. Each time I get one patch and read the readme file, it tells me I need another patch for the U.S. Energy Policy Act for 2005. I am just about to install Solaris 10 patch 119689-07. I don't need any other patch updates, just the bare minimum new DST patch. Thanks for your help.

    119689-07 is obsoleted by 118836. http://sunsolve.sun.com/search/document.do?assetkey=1-21-119689-07-1
    118836-36 is latest rev of this patch -- the kernel patch, whic has latest timezone data for the OS
    You'll need to make sure java has latest tz data, too:
    http://java.sun.com/javase/timezones/
    As far as I know, these are the bare minimums for a system to function properly re: latest DST schedule

  • Need Win 7 recovery discs for new hard drive

    I am not sure which Windows 7 Operating system my laptop had, but I need the recovery discs to put Windows 7 back on my HP dv6-6167cl notebook. 
    My original issue was that my notebook was unable to restore or anything on its own.  After calling HP support and performing a guided diagnostics test, it was determined that my hard drive was bad.  I purchased a new hard drive and replaced it, but need to get Windows 7 back on it.
    Thanks!
    This question was solved.
    View Solution.

    Hi,
    Your notebook originally shipped with Windows 7 Home Premium 64bit - you can order a replacement set of Recovery Media from the link on your Product Page below.
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5118...
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

Maybe you are looking for