Satellite 5205-S703 (Windows XP Pro SP2) and TOSHIBA Common Modules

I have a notebook:
Toshiba Satellite 5205-S703.
After installing Windows XP Pro Service Pack 2 i can't install TOSHIBA Common Modules (file: s140acpx.exe).
During installing this programm gives the message:
"The installation is failure. Please make sure its reason then retry install".

Hello
Did you install the unit with WXP full version that includes SP2? The download file is the right one.
I really have no idea why this happen. The only what I can recommend to you is to remove SP2. Install the unit completely and after that install SP2 again.
Good luck!

Similar Messages

10gR2 on Windows XP Pro SP2

Can anybody help: I just installed Oracle 10g Release 2 on Windows XP Pro SP2 and receive the following message when starting the Enterprise Manager: DBD Error: OCIServer Attach. Via SQLPlus I can work and the Instance is running.
I would appreciate any help or advice!
Thanks!
Fred

Hi Fred
Can you provide any more details on the error. Maybe a screen dump of when you run emctl start or emctl status?

Windows xp pro sp2 no display in java windows

Hi everybody,
I have just install my new computer, windows xp pro sp2 and java 1.5 update 4, and I have this problem:
I can't see what's inside java windows, for examples when I go throw the control panel and I want to configure java when I double click on the icon, I see the borders of the windows but nothing inside..
Same thing with some java installer...
I tried to unistall java 1.5 and install java 1.4 same thing...
As any one a solution to my problem?
thks

OK I found why..
But..It's strange when I put my ATI driver on normal, and not on High Quality it's working :)

Erro 3256 using Apple Airport Express with Windows XP Pro SP2

I am running Windows XP Pro SP2 and am trying to stream my music to the Livng room from my PC in my office. I use an Apple Airport Express. I am running iTunes 8.0.1.11 on the computer that isn't getting the signal through. Now please read the entire message before you decide it is the version of iTunes that I am using.
It was getting through just fine on my Denon 3300 but since I switched to a Denon 3802 the signal is not geting through from my main computer. It works fine from the computer sittng adjacent to it.
I also have music on a 2nd computer and am running iTunes 7.6.2.9 on it. The music gets to the living room stereo just fine using the same Apple Airport Express. The signal strength on the computer that is successful in streaming the music to the Apple Airport Express is "excellent". On the computer that is not successful, the signal strenth is "low". Now these computers are adjacent to each other and the signal has to go through the same wall and
exactly the same distance over the same network.
How can it be "excellent" on one and "low" on the other? Is it just a matter of signal strength? How do I fix that?
I keep getting "unknown error occurred 3256"
Help please. Do I have to do something to the network? or???
Remember I am a Windows user, not a Mac user. I do not have a "Configure IPv6" setting anywhere in my preferences. That must be a Mac thing.

Got the error message 3256 after downloaded latest itunes version 8.xx.
After days of reading logs and bullentin boards, uninstalling, hard resets,firewalls experiments, etc, I found solution for me. Following firmware upgrade to airport express solved. When you go to Apple download center and search for airport revisions only the MAc version pops up. However they do have this one for windows. Give it a try. Good luck.
http://www.apple.com/downloads/macosx/apple/firmware_hardware/airportexpressfirm wareupdate63forwindows.html

IPod, iTunes, and Windows XP Pro SP2

I recently upgraded my computer from running Windows XP Pro (no service packs installed) to running Windows XP Pro SP1a, and now SP2.
While running SP1a, I connected my iPod (5th Generation video, 30GB model) to my computer, but it didn't appear in My Computer, nor iTunes. It was recognized by Windows, as noted by the "Safely Remove Hardware" option, as well as my normal "
"HI-SPEED in non-HI-SPEED" warning (my computer is running USB 1.1). I've also tried all four ports, and all four gave me the same response.
I tried connecting it again once I installed SP2, and again, same problems arose. I began trying to troubleshoot it by doing the Right Click on My Computer -> Manage -> Start/Stop iPod Service thing, uninstalling and reinstalling iTunes, repairing iTunes, using the CD I got with my iPod... nothing worked, and it's still only be recognized but basically unusuable.
The iPod displays the "Do Not Disconnect" message, and shows signs of being charged, so I know it can't be anything wrong with the connection. I've also connected it to my school laptop (running XP Pro SP2, USB 2.0 connection) and it worked perfectly fine, showed up in My Computer and everything.
I've even run iTunes, gone to Help menu -> Run Diagnostics -> iPod Diagnostics, and 3 of the 4 "lights" are green; the last one, "iPod Connection Status" is red. And that, of course, tells me nothing about why my iPod won't be recognized otherwise.
I've come to the conclusion that, under SP2, you can't use USB 1.1 but that makes absolutely no sense at all... could anyone help me out and give me any ideas as to whether or not that is true, or else what might be causing the problem?
Thanks so much in advance!

Just tossing in my experience quickly:
Ever since I "upgraded" to v7 of iTunes, my iPod (60G w/Video) hasn't been recognized, same as Rebecca. Also my TransFlash memory cards aren't recognized, either. I went through many steps listed in these forums, to no avail; I even did a repair install of Windows. I have noticed in my Device Manager the following: a yellow exclamation point beside "parport" and "serial". (Right-click "My Computer" > Properties > Hardware > Device Manager > View > Show Hidden Devices) For both of these entries, under their properties, it says this: "This device is not present, is not working properly, or does not have all its drivers installed. (Code 24)" I haven't found much info surfing the net as of yet... I hope this info helps a bit. Don't mean to hijack, here, either. But in my opinion the new iTunes upgrade corrupts the windows registry somehow, as this story of mine seems to be quite prevalent...

Satellite U300 & Windows XP Pro SP2

Hi,
I've installed Windows XP Pro SP2 on U300, I've downloaded all drivers and utilities, everything works fine but I have one device in the Device Manager with Yellow Bang (!) and it's: "PCI Memory Controller".
Where can I get the driver fir it?
Thanks,
Moshe.

Hi Neil,
After doing some research, I found the solution.
U300 contains "Intel Turbo Memory 1GB" (Robson) which use to accelerate
HDD I\O and battery saving, this is actually a hardware card on the PCIe bus.
The problem is that this feature is supported only under Windows Vista... and since
we're using Windows XP all we have to do is just to disable it in the hardware manager.
Regards,
Moshe.

No wireless access with Windows XP Pro (SP2) on Macbook Pro

Hello,
Just installed Windows XP Pro (SP2) on my new Macbook Pro using Bootcamp Beta. The installation has gone fine with the exception of wireless access to the internet through my Airport home network.
I've tried all the other configuraton wizards on XP...no joy.
The three other macs in the house (2 wireless, 1 ethernet) and one Windows laptop (wireless) are all fine and dandy.
Any suggestions on what to do?
Thanks
17 and 15 Powerbooks, iMac
17 and 15 Powerbooks, iMac

Right Click on My Computer
Select Manage
Click on Device Manager
Make sure that your Ethernet Adapters are working properly
If there is an red X or a yellow ! next to any ethernet adapter then try to reinstall the drivers.
(you can reinstall the drivers via the installation cd or double click on the hardware device under device manager. there should be a reinstall drivers button in there. point it to the CD that you burned from bootcamp)
(there will be a couple of devices that are not working properly.)
MacBook Pro Mac OS X (10.4.8)

Windows XP Pro SP2 cd-rom after downgrading from Vista

Hi everybody.
I successfully downgraded my T61p from Vista to XP Pro SP2 using the downgrade cd-roms send by Lenovo.
Everything seems to work well. I downloaded all drivers. No problem.
But I recently installed a rather old software that I frequently used on my old A31p. This software (a Microsoft program !) has automatically modified some files from XP Pro without any autorization.
Once it was done, I was asked by the system to insert the original Windows XP Pro SP2 cd-rom to repair this modification.
Of course, the (Vista to XP) downgrade cd-rom set was not recognized by the Thinkpad as the original XP set.
An original cd-rom which I finally don't have !
I tried with an original XP Pro SP2 cd-rom bought a few years ago for my A31p. Unsuccessful.
Where could I find the XP Pro SP2 cd-rom corresponding to the downgraded system ?
Thanks for your help and suggestions.
Regards.
J.L.
Jean-Louis L.
Thinkpad A31p - T42p - T61p - TP Tablet

James,
thanks for your answer.
But I wrote on my first post "I tried with an original XP Pro SP2 cd-rom bought a few years ago for my A31p. Unsuccessful."
Thus, I don't see any difference between an original Microsoft Windows XP2 Pro SP2 version cd-rom and one created by burning a downloaded version of the OS. An original was not recognized, what would a copy do ?
If possible, it might be probably better to create an XP Pro SP2 cd-rom from the "Rescue and Recovery" files which were reinstalled when downgrading from Vista to XP. (I hate the word "downgrade" : while I was doing it, I had the feeling I was upgrading my Thinkpad !)
I have been using for several years (and still use) an A31p (Since 2002, 8 to 10 hours a day) and a T42p. IMHO, the T61p is the same category of "great" notebooks. Thinkpads are really the best notebooks I have ever used. I noted no significant difference between IBM and Lenovo Thinkpads.
Jean-Louis L.
Thinkpad A31p - T42p - T61p - TP Tablet

Only seeing 2 GB memory (Windows XP Pro SP2, 32 bit)

I have 4 GB installed on my Mac Pro (early 2008). It's running Windows XP Pro SP2, 32 bit). The System Information says I only have 1.99 GB of RAM.
I understand that 32-bit Windows can only see up to 3 GB of RAM. But I'm only seeing 2 GB. (For example, I have a MacBook Pro running 32-bit XP and it sees 3 GB).
In Mac OS X, I see all 4 GB, so the RAM is probably seated properly and fully functional.
Any help? I saw another thread about the same problem, but that was Vista.
thanks
Edit: I CORRECT MYSELF -- This computer has been updated to Service Pack 3.
Message was edited by: mikenmar
Message was edited by: mikenmar

Hello Hatter,
Long time no chat
Do you have any info. on how Windows 7 will behave in the Mac Pro scenario?
My MacPro has 12 GB RAM crammed into it, I'm running XP-Pro 32 bt SP3 - and I too see only 1.99GB RAM in my XP environment. I have no troubles at all seeing all 12GBs in Leopard 10.5.6. I gave up on VMware Fusion after realizing it completely ignored my QuadroFX4500 graphics card.
Now I'm running in pure BootCamp for any/all of my XP needs - which is only to run SolidWorks on my Mac. (SW's tech supp doesn't like me very much - I think they've flagged my account as "one of those Mac freaks" - I digress...)
I'm hopeful Windows7 64bit will be fine and thus will allow SW to see more of the RAM my beast contains within.
Thanks in advance for any thoughts you care to share.
Peace,
wd

Bug with Access connexions with Windows vista Pro SP2

I wish to use Thinkvantage Access connexions on my Lenovo G550.
I previously used Acces connexions on Thinkpad and i like this tool.
I have installed Access connexions but I have troubleshooting beause my computer runs uner Windows vista Pro SP2.
Is a solution exist to resolve this bug ?

Hi and welcome to the forum!
As far as I know, Access Connections is only compatible with ThinkPads and few lenovo 3000 systems, see following from support page: http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/85cv28ww.txt
Hope this answers your question.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Java_es_05q1-windows-x86 install fails 1628: Failed to complete installation on windows xp pro sp2

Hi All,
I'm trying to install Java ES 2005Q1 on my windows xp pro sp2 notebook, but it always breaks with this error message: 1628: Failed to complete installation
I realized that the SUNJavaES.log always ends at line 151 which is 131077 characters long.
These are the last few characters of this line: ..." AD_MANUAL_ES_CONSOLE_HELP=D:\Sun\JES2005Q1\Server-Root\manua l\es\console\help\ AD_MANUAL_FR_ADMIN=D:\Sun\JES2005Q1\Server-Root\manual\fr\ad min\ AD_MANUAL_FR_ADMIN_HELP=D:\Sun\JES2005Q1\Serve "
I attached the last log file.
This line always breaks at the 131077th char independently of the content of it. I tried to skip some components of JES to see what will occur. The current content of this line obviously was different, but it has broken at the same point.
Thanks in advence for any help.

This could be due to a known issue with length of installation path
Can you try and install in a location with less than 8 characters ?
eg: C:\JES05q1 or C:\Sun

Apple Mobile Device Support fails to install on Windows XP Pro SP2

I have a dualboot between my Vista and my XP, my itunes on Vista works great and can connect with my ipod touch (2.1) but on my XP the installation of AMDS fails. Tried completly re-installing all services, i searched the internet for possible solutions but it seems i'm the only one having problems with windows XP, all the other similar problems are on Vista.
I know it's AMDS that fails because i unpacked the .exe file and ran all the installers one by one, they all work except AMDS (i get a rollback feature). I downloaded it with 3 different browsers from the official apple site and to eliminate that it's my hard drive that gives errors i also did a CHKDSK.
Also, it's not my ipod either, it can connect to my Vista and other computers with windows XP.
All the latest drivers are installed and during the installation no CD/USB was inserted except my mouse, i even tried it with the CD tray open (sometimes helps). Safe mode also doesn't work
I have no idea what's wrong. Could anyone help me out?

Hi,
good news: You're not the only one with this problem. Bad news: I don't have a solution either. To restrict possible answers here is what I did so far:
- computer was set up brand new with Windows XP Pro SP2
- iTunes installed, AMDS didn't, everything deleted after this, nothing (no iTunes, no Quicktime, no Apple updater) left on computer
- disconnected laptop from network, switched off firewall, switched off virus scan
- ran install package for AMDS only, as Johan described, install won't finish, files are first copied then everything gets rolled back (and no log found). This means the service is not existing, so the problem is NOT solved by going into services and switch it on ...
ANYONE PLEEEASE?
Cheers & thanks

No internet in Windows XP Pro SP2 under Virtual PC on PowerBookG4.

No internet in Windows XP Pro SP2 under Virtual PC on PowerBookG4.
Unknown ethernet device in Device Manager. Need drivers.
No more icons in Network and Internet Connections.
In Mac OS X 10.4.8 i'm using Wi-fi internet connection.
In Virtual PC I'm using Shared Networking.

Hi Nikolay!
Have you installed the VPC Additions after setting up Windows? I believe you can insert your VPC CD and install them on the Windows side through the D: drive.
Hope this helps!
bill

Using colour profiles with Windows XP Pro SP2

Hi,
Freshly-installed WIndows XP Pro SP2 on the Unibody MBP.
I note that in the advanced display settings there is a tab for colour management. It offers the opportunity to add a .icc or .icx (I think) colour profile. I copied across my .icc-prefixed colour profile from my Leopard install, added it, and Windows reports it as invalid.
Can anyone tell me how (or whether it's possible) to make a Leopard-created .icc profile work with XP Pro SP2? If it's not possible, can someone suggest some free software for XP Pro SP2 that I can use to achieve a similar result?
Thanks.
SiR. G.

Got the error message 3256 after downloaded latest itunes version 8.xx.
After days of reading logs and bullentin boards, uninstalling, hard resets,firewalls experiments, etc, I found solution for me. Following firmware upgrade to airport express solved. When you go to Apple download center and search for airport revisions only the MAc version pops up. However they do have this one for windows. Give it a try. Good luck.
http://www.apple.com/downloads/macosx/apple/firmware_hardware/airportexpressfirm wareupdate63forwindows.html

Installing Windows XP Pro SP2 on K7N2 Delta2-FSR + AMD Athlon XP 2500+

I tried and tried to install the Windows XP Pro SP2, but it just doesn't work. I don't use the RAID with the WD 80GB SATA HD.
When the installation CD finished loading the required system files and "Starting the windows" in the blue screen, after than the system just hang there. Anyone who met this problem before? How to solve it?

The memory module that I am using now is Kingston PC3200 1GB DDR, I can't find the power supply details.
I just updated the newest BIOS to it and I don't configure the board to do any overclocking.
Just now I tried to configure any possible settings in the BIOS to make the system works, and I unplug the adapter for the mouse to use the USB port.
Guess what? It worked...
I hope it will keep working in the future, otherwise I don't know what I can do...

Satellite 5205-S703 (Windows XP Pro SP2) and TOSHIBA Common Modules

Similar Messages

Maybe you are looking for