Satellite 850 - is it possible to i install Win 7 - If yes, how?

I was in a rush to get a laptop for a job and got a Toshiba Satellite 850 which comes with windows 8 pre-installed.
I absolutely detest it and assumed I can simply wipe the whole thing and put on a windows 7.
After reading through lots of advice forums it seems that this machine is built for windows 8 and I can't remove it easily. I am so utterly and totally disappointed.
Is this really the case? Please tell me it's not.
I urgently need a reply as I start work in the morning and I need Win7 installed for work.

You are really a funny guy You blame notebook manufacturer because you are not able to install Win 7?
I assume you are doing this out of ignorance... you are unaware how to do that exactly...
First of ALL notebooks from ALL notebook manufacturers which are preinstalled with Win 8 supports secure boot and UEFI BIOS. These are Microsoft requirements.
Secondly: Its possible to install Windows 7 on all notebooks; no matter which system was preinstalled. But you have to know how to do that...
You said you are owner of Satellite 850. But what series? L, A C??
Now some basic info:
To boot from external sources: CD/DVD drive, USB, etc. you have to disable secure boot and have to change from UEFI to CSM mode.
http://aps2.toshiba-tro.de/kb0/TSB2B03F30002R01.htm
It seems that you done this thats good.
Keep the SATA option in AHCI mode.
During the Win 7 installation setup, you will be asked to add drivers (SATA drivers)
Download the driver from Toshiba EU page, put it on the USB stick, and add it to the Win 7 installation.
Now the Win 7 should see the HDD and you should be able to install Win 7 on new partition.

Similar Messages

  • Help for Install Win 10 TP from Iso DVD

    Hi,
    My computer run with WIN 7 Pro under C, I create a VHD under F, I download the ISO of WIN 10 TP, Burn a DVD, now I am ready to install WIN 10 TP, but how.... copy the files from DVD in my VHD in F and run the setup? or when I run the DVD the system ask me
    where I like install WIN 10 TP, I am little bit afraid and I don't want overwrite anything in my C that after all working fine. While I like see and try how work WIN 10 TP.
    Thanks for help
    Cariboou!

    Before Thanks
    I follow step by step the instruction but I get this message
    Recovery
    you PC need to be repaired
    The Operating system uses the Physical Address Extension feature to support system with more that 4mb of RAM. You'll need use a pc with a compatible processor to run the Operating System.
    Error Code: 0xc0000260
    You'll need recovery tools. If you don't have any installation media (like a disc or USB device) contact you PC administrator or PC device manufacturer.
    Cariboou
    It looks like your PC doesn't supports Windows 10 Technical Preview. Please check Windows 10 Technical Preview
    System Requirements.
    You need to install Windows 10 Technical Preview on a PC which should meet Win10 System Requirements.
    If you cannot view system requirements from the above link, then see:-
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Is it possible to install Win XP on Satellite P20 w/o DVD drive?

    Hi, I'm new to this support forum, but I'm hoping you can help with my problem.
    Windows has become corrupt on my Satellite P20-521, yet I'm unable to use the Recovery Disc as the DVD drive has ceased functioning. I was wondering if there is any other possible method for installing the OS onto my laptop without the need for the drive. I have gotten to a stage where the harddrive is essentially formatted (due to placing the HD into another laptop and performing a windows boot that formatted and copied windows install data, however, this hasn't worked in terms of installing windows).
    Thank you in advance for any help you may provide.

    Okay, thanks for the help and suggestions guys. With the info you gave me, I managed to think out the most awkward and roundabout method possible. I've noted it down so that others may attempt to do so in the future if they so desire.
    Process to install Windows:
    Transfer HDD from Toshiba Satellite (Comp A) to Dell Latitude (Comp B)
    Copy the 'i386' folder from the Windows XP CD to a USB Memory Stick
    Use a DOS CD to boot into DOS on Comp B
    Delete all partitions and create 2gb FAT16 partition
    Format C: Drive
    Install DOS to HDD ('XCOPY A: C:\DOS' & 'SYS A: C:')
    Remove DOS CD
    Restart
    Test booting into DOS (if it doesn't work, repeat steps above or find method to remove the MBR)
    Restart
    Use 'Damn Small Linux' live CD to boot into Linux
    Mount HDA1 (Harddrive FAT16 partition) and SDA1 (USB Memory Stick)
    Transfer the 'i386' folder from SDA1 to HDA1 using File Manager
    Restart
    (Optional: Activate 'smartdrive.exe' in DOS if it's available)
    Activate 'WINNT.EXE' from within i386 folder
    Follow Windows XP Installation procedure
    (Note: somefiles may not be found when it's in the copying stage, this may be due to the version of Windows XP you copied the i386 folder from)
    Warning! Can take numerous hours to complete without 'smartdrive.exe'.
    For me, due to the only readily available disc being an 'upgraded' XP (came with lots of tools and service packs allready installed for convenience) install disc, I found files 'missing' during the file copying stage prior to actual Windows installation:
    ieframe.dll.mui
    msfeedsbs.dll
    The files are part of Internet Explorer 7, and are neither crucial to installation nor the running of Windows XP.

  • Is it possible to install Win XP on Satellite T110?

    IS IT POSSIBLE TO INSTALL WINDOWS XP IN TOSHIBA SATELLITE T110.
    BECAUSE WHEN I START INSTALLING XP IT SAYS SOMETHING "HARDISK ERROR" PRESS F3 TU QUIT.
    WHAT SHOULD I DO ??

    Of course its possible.
    The Win XP does not seem to recognize the HDD due to missing SATA driver.
    You have to add SATA driver while Setup procedure.
    The SATA drivers are part of Intel Storage Manager which you can download from Toshiba EU driver page.

  • Recover Satellite C850-F12S - currently installed Win 8.1

    hi!
    i bought my Satellite C850-F12S with Win 7 Starter now i installed Win 8.1 and i want to restore it to its original state back to Win 7 Starter but dont know how to do that.
    I didnt create recovery image so m lost on how to recover it.
    Anyone help me please

    If you did not create the recovery medium in the past, then you will not be able to recover the notebook.
    The HDD recovery isnt possible anymore because the HDD recovery partition was deleted during Win 8.1 installation.
    You have only one option to do that: you have to order such recovery disk:
    http://backupmedia.toshiba.eu/landing.aspx

  • Can't install Win 8 - Satellite Pro C660 does not detect HDD

    Hello,
    My HDD has died, so i decided to upgrade my Satellite Pro C660-1D9 to an SSD.
    I made a bootable USB with Win8, and booted just fine.
    The problem is that it does not detect my SSD so i can proceed with the install.
    SSD shows up in BIOS, but not in Windows install.
    It says there's a driver missing.
    I downloaded AHCI drivers (XP, only ones available) and even then, after selecting the only driver that appears, it says no new devices found.
    I tried changing SATA mode from AHCI to Compatibility mode and it's the same..
    What can i do?
    Thanks for the help.
    Best regards,
    Bruno Moreira

    Older Windows XP required an AHCI driver from Intel but I think this isnt a missing SATA driver issue because as far as I know Windows 8 as well as Win 8.1 already contains the drivers in order to recognize the HDD or SSD drive.
    Furthermore the OS installation should be possible even if the driver would not be added... for this procedure you have to use the "compatibility mode".
    As you said, the compatibility mode did not work too, so I think there is another problem.
    However, Toshiba driver page provides also an Intel RST (Intel Rapid Storage Technology) driver (Windows 8 - Upgrade) which you could try to add while OS installation.
    But Im wondering if you would be able to install this Win 8 on common SATA HDD.
    Did you try to format the SSD drive using another computer and then to install Win 8?
    Try it out.

  • Is it possible ro clean install Mountain Lion over Mavericks on a brand new mac mini

    Is it possible to "clean Install" mountain lion over mavericks on a brand new mac mini

    Actually evrything I can find states that the last mini to run SL was 2010.
    It appears that the 2012 mini's shipped with Mountain Lion and later Mavericks. Link
    Also why would the OP need a bootable SL installation media when they want to install ML?

  • Is it possible to re-install iWork 09 without the physical CD?

    I bought iWork 09 two years ago from an Apple store in the UK but have since moved abroad to Australia.
    I installed the software on my MacBook (late 2008 model) but have since had to replace the hard drive so it is no longer installed.
    Is it possible to re-install iWork 09 without needing to pay to re-download it from the App store? I have the serial numbers and barcodes but not the physical disc with me.
    Thanks

    The physical DVD required no serial number. If you have lost that yes you will need to buy the M.A.S version with the consolation that it is cheap here and can be installed on all your Macs at no extra charge.
    If you have a serial number it is possible you bought the downloadable version, in which case use that to install and use the serial number when prompted.
    Peter

  • Blue screen when installing Win XP Pro on Satellite A100-211

    Hi all.
    I'm started to get really desperate here!! I've just bought my new Satellite A100-211 and now I want to install my own copy of Windows XP Professional (since the notebook ships with XP Home). But, when I try to boot from my Win Xp Pro CD (with no SP1 or SP2 integrated), i get a blue STOP screen just as the setup application reaches the "Setup is starting Windows" phase!! The STOP message states something about a file named "pci.sys".
    I don't know what is wrong or how to install XP Pro!! It should be so simple! I even tried getting the SATA drivers from intel and load them at the windows XP Pro install setup (with F6) with a floppy, but I still get the same blue screen at the same stage of the setup!!
    Can anybody PLEASE help me??? Can anyone explain how can I install Win XP Pro on this notebook???
    Thanks very much in advance!! I'm really really freaking out with this
    Octavio.

    Hi
    Did you get this error message?
    "stop error 0x7E in Pci.sys"
    I have found information on the Microsoft website that you need the latest Microsoft service pack.
    http://support.microsoft.com/?kbid=839641

  • Windows 7 Installation on Satellite C50-A-1JM possible?

    Thanks for reading my topic.
    I have bought a Toshiba Satellite C50-A-1JM and I cannot install Windows 7 on it.
    I upgraded BIOS to V1.30 still after that, I have only the option Secure Boot to disable or enable
    There's no option to switch to CSM or legacy, as I know this MUST be done before I can install Windows 7.
    Is there any chance to install a Win7 on this Laptop?
    Thanks
    Elmar

    Thank you, yes, you are right, there are really no drivers to download.
    With a modified USB-stick
    [http://www.com-magazin.de/praxis/windows-7/windows-7-uefi-pc-installieren-7531.html?page=4_setup-stick-fuer-uefi-pcs-erstellen]
    I got the laptop started to installation process, but shortly after loading files there always approaches a red stripe at the top of the laptop and windows installation freezes.
    It doesnt matter, if it is installed from the usb oder from original MS DVD, same error, same freeze
    So, no chance to downgrade - then I will send it back.
    Thank you!
    Elmar

  • Trying to install win xp pro on Satellite A200-TH1 (PSAE3C)

    Hello everyone,
    I just bought this laptop. It came with vista. I want to install xp pro on it, I mean keeping vista as well. So I did partition, and allocated 72GB for xp pro. Now the problem is that, xp pro install cd does not recognize the harddrive. It says no harddrive present.
    It is a SATA drive. So I did some googling on it, and found that xp pro does not have SATA drivers so that is why it can not see the hard drive. I need to install the SATA drivers with the xp pro by pressing F6...and blah blah. Since this laptop did not come with the floppy, so I found on some forums to include the drivers with xp pro cd and make an iso image and try to run it.
    I tried many times but every time it gives me error that cable is broken. Can anyone pls let me know what is wrong? And also if someone can guide me to get the right drivers for my SATA drive and intel chipset 965PM...If I go on to the Intel website...
    They are all .EXE files. I want driver files only, so i can insert them in the xp cd. Thanks for your help and guidence in adavance.
    Adam
    Hello All,
    I was able to get the drivers...now I came accross another hurdle... When I put the XP installation cd (which is an ISO bootable disk.. this includes xp sp2 and realtek nic drivers) it gives me message that checking for media..RTL8100E/8101E v1.02....test failed...check if the cable is connected...
    Any ideas? What should I do now? Any suggestion would be appreciated...thanks
    Adam
    Message was edited by: adam0007
    Hello All,
    it is me again...I got the solution...now I am installing win xp on this toshiba...if someone needs help pls let me know...I can guide them through...
    I am still waiting for xp to install completely...will update you guys later...
    Thanks for listening to me. :o)
    Adam

    Thanks for the feedback.
    In fact the XP drivers for the A200 series are not released on this time. I didnt find it on the Tosh page.
    But there are a lot of threads about XP drivers and most of them provide a great links to a XP drivers which functions on a Satellite A200;
    For example:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=24935

  • Is it possible to install win 8.1 (32 bit) in Intel(r)Core(TM)2 CPU 6300 @ 1.86 GHz 1.87 GHz /4 GB Ram 1333 MHz desktop

    Is it possible to install win 8.1 (32 bit) in Intel(r)Core(TM)2 CPU 6300 @ 1.86 GHz 1.87 GHz /4 GB Ram 1333 MHz desktop.
    Thanks.

    Is it possible to install win 8.1 (32 bit) in Intel(r)Core(TM)2 CPU 6300 @ 1.86 GHz 1.87 GHz /4 GB Ram 1333 MHz desktop.
    Thanks.
    Could be possible, but you ask this question to persons who probably think they know it and guess.
    Ask this in the End User Forum for this problem
    http://answers.microsoft.com
    Success
    Cor

  • I need new pc. is it possible to instal Photoshop CC again ? How often can I install?

    I need new pc. is it possible to instal Photoshop CC again ? How often can I install?

    Moineauhh you can install and utilize your Creative Cloud Membership on up to two computers.  You can find more details regarding the installation process at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.

  • Is it possible to only install Color from the FCS3 suite?

    Is it possible to only install Color from the FCS3 suite? If so, what is the correct procedure?
    thanks

    I'm not sure whether you can install it on its own or whether you will need FCP as well.
    Open the installer, go through it and you will come to a page where every app and its media is listed.
    Deselect everything except Color and continue with the installation.
    If it refuses you will have to go back and select FCP as well.

  • When I left my former employer, Pollinate Agency, I bought a MacBook Pro with Acrobat Pro (version 9 or possibly 9.5) installed from the company. I recently had a serious computer crash, and needed to get all contents erased. The support provider didn't h

    When I left my former employer, Pollinate Agency, I bought a MacBook Pro with Acrobat Pro (version 9 or possibly 9.5) installed from the company. I recently had a serious computer crash, and needed to get all contents erased. The support provider didn't have my product key, so could not reinstall Acrobat Pro for me. Since then, I have gotten the product key sent to me from my former employer, [ REMOVED ] So I need help in re-downloading, installing and activating the Acrobat Pro software on this computer.

    Please remove the S/N immediately (I can't or would). Never post them online. As for download you can go to http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html on the right panel to get 9 pro. I am not sure there is a MAC version there, but that is the first place to go. If it is the proper version, then please back it up to CD and/or portable HD, not the system HD.

Maybe you are looking for

  • TS1368 When I try to connect to iTunes, it doesn't work and tells me "We could not complete your iTunes Store request. The network connection was reset."

    When I try to connect my newly restored iPhone 4 with iOS 7 on it to iTunes, it doesn't work and tells me "We could not complete your iTunes Store request. The network connection was reset." My network connection is working perfectly fine.

  • Some files not showing up in iPhoto

    I used the Grand Perspective app on my iPhoto library package to find large video files I could reduce to save space. In the process, I've found some files that are in the package but aren't displayed in iPhoto. If I do a search for the file in iPhot

  • 10.5.6

    Is the four finger swipe there after you update for the 1st gen MBA I was just wondered if anybody saw it. I read that it is there for those people who have the 2nd gen and the gesture was not there.

  • Export Problems - PLZ HELP!!!

    HELP!!!  This is driving me CRAZY! I am trying to export my sequence to an FLV at 720x480.  You would think this wouldn't be hard since my source video is already 720x480.  When I click Export and it goes into the Export Settings, I click "FLV - Same

  • JSF 1.2 Session Timeout Issue

    I am using using: JSF- Sun RI (1.2) Websphere (6.1) Facelets (1.?) RichFaces (3.3.2) I am having an issue with session timeouts that shows up in two different ways: Scenario 1) the client makes an ajax call after the session has timed out Scenario 2)