Satellite A - CD/DVD drive does only read CD's

I'm abit confused at this situation. My CD/DVD drive reads CD's but does not read DVD's. I dont know if I have to reinstall the driver for the CD/DVD or does it need replacing.
Please can someone help.

Try removing the CD/DVD Filters from the Registry.
When CD/DVD related software is installed (such as iTunes, Nero, virtual CD software), they install filters into the registry, which can cause compatibility problems.
1) Run Regedit (Start -> Run -> Regedit)
2) Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
3) In the right pane, delete the "UpperFilters" key, and delete the "LowerFilters" key.
4) Reboot.
If your CD/DVD programs stop working, you will need to reinstall them (preferably with an updated version).
This utility can remove the filters for you:
http://www.csd.toshiba.com/content/support/bulletins/su2065061/RmvFltrs.exe
If thats no good, then you may need to replace the DVD Drive.

Similar Messages

Satellite C855D-S5209 DVD drive does not read dvds

I was trying to install some software for the first time on my Satellie laptop and the dvd drive was unable to read or recognize the dvd installer discs. Any help would be appreciated thanks.

Are there any discs that it can read?
Try looking at this article.
What can I do if my CD or DVD drive doesn't work properly?
- Peter

Dvd drive does not read dvd but reads cd only.

my hp compaq 420 core2 duo dvd drive does not read the dvds but only reads the cds. How can i solve this problem, please help me with the correct answer.
This question was solved.
View Solution.

It will likely require replacement of the drive. There is more than one laser in there: one for each function. One can go bad without the other going bad.
608141-001
Above is the part number for the DVD burner drive. I could not find one on eBay. Here is one online:
http://www.mydvddrives.com/replacement-for-hp-compaq-608141-001-sata-cd-dvdrw-dvd-ram-drive-burner-l...
Replacement is easy. Remove a single screw on the bottom and slide the old drive out and replace with the new drive.

Tecra M5: DVD drive does not read these mini DVDs

I have canon dvd handycam, and mini dvd works on it. One month back i recorded movie and pictures on mini dvd using handycam and ran mini dvd on my tecra M5 dvd drive, it worked very fine.
Now after 1 month i have 5 mini dvds with movies and pictures which i took on 1 month vacation in diffierent countries, i tried my best but tecra dvd drive does not read these mini dvd, cd drive label appears instead dvd drive when i put mini dvd in it.
All other standard size dvds, cds working fine on it.Its complicated and as well as irritating.
Any suggestions?
Why its messedup?

Seems the lens cannot read this miniDVDs. Possibly the drive lens cannot calibrate and therefore the miniDVDs are nonreadable.
Try the solution from sascha. Maybe youre a lucky man and it works.
If not, try to remove the drive physically from the notebook. Reboot the notebook without the drive. The Windows and BIOS shouldnt recognize the drive.
Then shuts down again, put the drive into the notebook and boot up the unit.
The notebook should recognize the drive and should indicate the firmware again.
Im not sure if this will help you but its attemptable

My external Iomega DVD drive does not read DVDs. Why?

My external Iomega DVD drive does not read DVDs. Why?

what does this question have to do with a mac? post in the Iomega fourms.

DVD drive does not read media

Hi. This is regarding my Satellite L750 laptop (1 year old), for the past two days the DVD drive refuses to read any media - CDs/DVDs. I've done extensive and exhaustive searches to find a solution to this problem but to no avail. One of the most common problems I have come across is a software conflict with iTunes (installed on my machine) and a solution which states deleting "LowerFilters" and "UpperFilters" from the registry. I have tried this out but have not been succcessful in solving the problem. Also, the drive is listed in the Device Manager.
Just for the record, I have not updated/added/deleted any CD recording software or any other software. I have not even updated iTunes for the past two months.
I'm using Win 7 64-bit OEM.
Can someone shed some light on this issue? Will appreciate.

You may want to try this Microsoft Fix-It.
What can I do if my CD or DVD drive doesn't work properly?
You could also try using System Restore to restore a previous restore point from before this became an issue.
If that doesn't work, you could try a recovery. Recovering your laptop to its original, out-of-the-box state is a great way to eliminate software as a possible cause of the problem. Note that doing a system recovery will return the laptop to its default conditions, completely wiping your data. Information on how to perform a system recovery can be found in your user's guide. On most models you can hold '0' (zero) with the computer turned off. Then press the power button while continuing to hold '0' until the recovery utlity starts.
- Peter

Satellite L655-106 - CD/DVD drive does not read disks

Toshiba satellite L655-106 dvd rom is reading all types of cds as blank.
I have run the registry cleaner and re-installed the driver but no effect

Are all disks no readable?
Try to clean the laser lens using cotton wool tip and alcohol.
Then try again

SD-L622A CD/DVD drive does not read some CD's - Satellite L300-144

Drive TOSHIBA SD-L622A.
The drive does not see boot CD with Windows XP Service Pack 3, some of boot CDs with diagnostic utilities (IMHO 2CD format).
Also these CD does not seen by drive even under Windows XP, Vista.
To My wife has bought Toshiba L300, but another modification. There there is drive Matsu****a (Panasonic).
Problems with the same disks has not arisen.
PS Sorry for a terrible English. My native language is Russian :)

In the first topic I wrote
..+The drive does not see boot CD with Windows XP Service Pack 3+..
I have taken other disk from my friend - the situation has not changed.
Installation Windows XP SP3 has a success only after copying the distribution kit on removable HDD and manual install Windows from command prompt
But I think its abnormal.
I think, the theme can be closed because this question should be addressed to Toshiba's fimware developers
+If you cannot use “some CDs with diagnostic utilities” maybe are the problem those CDs. For me it is not so dramatic issue. if you can use all “commercial” medias everything must be OK.+
May be.....but I have bought two notebooks Toshiba in a day for Me & My wife.
On my wives notebook all the above-stated disks playing normally, but it has another drive by Panasonic (Matsu****a)

Mat****a UJ841S CD/DVD drive does not read movies from blockbuster

My dvd mat****a drive UJ841S will read /write everything ok.
BUT it does not recognize Movies from Blockbuster. I cannot play a movie.
Can anyone help?
David

Hi
Seems this certain kind of DVD is not fully compatible with this CD/DVD drive
Sorry but such issues are not uncommon you will always meet some disks which are not fully compatible and that the drives laser lens cannot handle such disk
But just one question; are these movies created for the European region?
I mean there are different DVD regions
As far as I know the movies for European needs region 2
The United States need region 1 settings and South & Middle America need region 4
So if you would like to watch DVD designed for USA then you will have to change the region settings to 1.
But note; you can change the region settings only 4 times then this settings would be locked and it would be not possible to change it again

Satellite A100-447 - DVD drive won't read some discs

Hi,
I have a 4 month old Satellite 100-447 (PSAAN), came pre-loaded with Vista Home Premium, and has a Mat****a UJ-850S super-multi DVD/CD drive.
The DVD drive is not functioning correctly. It will recognise some blank DVD's, but never DVD-R and will not recognise any burned DVD's at all. It's fine with CD's, and with DVD movie discs. It's just recordable DVD's where there's a problem.
Also when attempting to write to a DVD when it does choose to recognise one it errors out half way through.
What can I do?
Thanks for your help.
Adam

Hi,
you can do the follwowing:
Go to this website http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp ,
download the latest firmware update for that drive, install it and then try it again.
Sometimes the manufacturer have to update their drives for the newest recordable media and so I think it can be possible that your drive is simply not up-to-date.
Greets

Equium A60 - DVD drive does not read data discs

Hello
I am having a problem with my DVD drive on my Toshiba Equium A60 laptop. The DVD drive (Pioneer DVD-RW DVR-K13A ) will play shop bought films etc without a problem. it will also read a blank DVD when you put it in the drive but once information/Data is on the disc it wont detect the disc.
I am not really that good with computer so any help would be most grateful. The computer used to play everything it just stopped doing it a few months back.
Many thanks Phil

The issue is clear.
Fact is that not all CDs and DVDs are supported and compatible. There could be always an issue with a reading or writing
The same happened to me too I had to test different CDs and DVDs from different manufacturers and finally some medias worked
In your user manual you should find a list of medias which were tested and should run properly check it!
bye

Equium P200 - DVD drive does not read all discs

My DVD Drive has just started reading some discs and not others, also some of the discs are not read all the time, you can put a disc in click on the dvd drive and it'll open the drive and say insert a disk, device manager says device working properly and driver upto date.
Does anyone know what the problem is?

Yes, terentino is right. Would be helpful if you could tell us which discs exactly work and which not. Maybe that would give the answer.
Did you installed more than one burning application? Sometimes several installed burning applications could interfere with the other one since every application installs some kind of libraries with their own burning/driver engine to control the functions of your drive.
bye

CD/DVD drive does not read all DVD formats and regions

Hi
My Teac-dw-224e-a does not read all DVDs formats and regions.
It does read CDs but no DVDs at all.
Not DVD-R and not even regular DVDs. I have checked the region of the DVD.
I have reinstalled the driver and also tried with different software.
What can I do?
Please help!

Hi
It is possible that your DVD drive has wrong region settings.
In this case it is not able to watch all possible DVD movies from different regions.
Of course you can change the settings 4 times. But after this changing the settings are fixed and its not possible to change it anymore.

Dvd drive does not read dvds

my laptop does not read dvd disks but its able to read some cd disks.
what should i do

Are there any discs that it can read?
Try looking at this article.
What can I do if my CD or DVD drive doesn't work properly?
- Peter

MY DVD drive does not read all DVDs and also does not burn CDS properly. Often while burning a CD i am prompted that " The machine is unable to caliberate teh required Lazer Power"

Hi i am having a i MAC which has mountain lion OS 10.8.2. I am facing teh followwing issues with my disk drive
1. I am unable to read all DVDS in it some DVDS work while others do not
2. I am able to read all CD's, but while burning a CD i am prompted with the following message
" Unable to caliberate lazer power"
3. Kindly assit me in solving this problem
regards

Hi
Four thoughts
• Brand and type of DVD/CD Media
• Burn Speed ?
• Ever used a Cleaning DVD ?
• Free space on Main Start-Up Hard Disk ?
Brand and type of DVD/CD Media: MATTERS
- Memorex, NoName and other Cheap brands - most probably works for other things BUT NOT FOR VIDEO.
I only use Verbatim
- DVD-RW - usually do not work OK but with various kinds of problems. DVD+R is a more modern sort and use to give problems on older DVD-players
I only use DVD-R
Burn Speed (in iDVD or alike): Matters
• Best or Max - is not best
I set it down to x2 or x4 Max
Ever used a Cleaning DVD ?
I use one WITHOUT Liquid but with brushes from time to time
Free space on Main Start-Up Hard Disk ?
- Due to that Mac OS X - is UNIX - it behaves likewise. It needs lot's of space on Boot / Start-Up Hard Disk for it's and the applications temp files.
I never go less than 25GB free space - If HD-Video material is used then 4-5 times more is a good thing.
Yours Bengt W

Satellite A - CD/DVD drive does only read CD's

Similar Messages

Maybe you are looking for