Satellite A10: 'base system device' after HDD reinstallation

I have formatted my laptop's hard drive (Toshiba Satellite A10) and downloaded the necessary drivers from Toshiba Europe web site. Everything worked out fine. Then I decided to upgrade my network adapter driver (wrong decision) and it slowed down considerably the system.
Believing that I was holding the solution in my hands I formatted again HDD and when it came to reinstalling the drivers everything loaded ok except one:
BASE SYSTEM DEVICE
Please let me know how to resolve this issue.

Did you install the chipset utility?
If not, do that firstly before installing any further Toshiba tools and drivers.
i recommend you to use the Toshiba Recovery CD.
Please check also this useful Intel article:
http://www.intel.com/support/motherboards/server/S5000VSA/sb/CS-022703.htm

Similar Messages

  • DV6416eo.. 500GB HDD, Windows 7. Base system devices w/o drivers

    Hie
    I replaced the original HDD with a 500GB WD5000BEVT.
    It works fine after I disabled Native SATA Support.
    I installed Windows 7. 
    Enabling Native SATA Support gives me a blue screen, and Windows 7 can't fix the problem.
    In device manager, I get in Other devices:
    Base system device - PCI bus 5, device 5, function 2
    Base system device - PCI bus 5, device 5, function 3
    No drivers for these.
    What would these devices be? Native SATA support?

    Hello jthompsn1957,
    You may want to read this article prior to any attempted OS downgrades.
    Good luck!
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Missing driver for "Base system device" x2 after Windows 7 install on laptop

    Upon upgrading to SSD drive and fresh installation of Windows Professional 64 bit, I have two conflicts in device manager referring to "base system device". Both devices are PCI Slot 2 (PCI bus 67 device 0 function 1)
    Both devices report the following code in system information: 
    PCI/VEN_1180&DEV_E852&SUBSYS_146D103C&REV_01/4&7ECE869&0&02E2
    I have read through 16 pages of other people with simlar problems but not the same code. I have installed the Ricoh 5-in-1 reader for 64 bit software with no success.  Any help will be greatly appreciated
    This question was solved.
    View Solution.

    Here is the link.
    http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=4173846&swItemId=ob_79991_1&swEnvOid=4059

  • Missing drivers after fresh installation of window 7 the base system device missing.

    missing driver on  HP pavilion dv4 the base system device drive,as a result of these i cant access sound on system.

    Hi:
    The base system device is most likely your card reader.
    Missing audio is related to something else.
    On the bottom of your PC on the sticker with the serial number, please post your p/n.
    That will identify the specific model of your dv4 and I can send you the link to the drivers.
    The p/n should be arranged similar to this:  AF846AW#ABA
    Paul

  • What is 'Base System Device'?

    After working with my laptop for over two years, i encounter more and more problems but the weirdest thing is that suddenly it tells me that it found a new hardware called base system device, which should be installed.
    I have no clue what that is, where to find the software or whether I need to install it at all. Can somebody please give me some advice here?
    Thanks.

    Hi
    Firstly could you please post you notebook name?
    Secondly: did you install the OS from the Toshiba recovery CD?
    This image contains whole drivers and necessary tools and after the installation of the OS from the recovery CD no unknown device should appears in device manager
    PS: Base system device is usually the SD Card Controller.

  • Base system device driver

    After rebuilding my Elitebook 8540pI have 2 Driver errors Both called base system devices,  How do I identify the devices to get the drivers? I have already reloaded the Chipset drivers and did the troubleshooting search to auto find the drivers without success.  Thanks in advance for any help.
    This question was solved.
    View Solution.

    Hi:
    Below is the link to the driver you need for the card reader.
    http://h20565.www2.hp.com/portal/site/hpsc/templat​e.PAGE/public/psi/swdDetails/?sp4ts.oid=4096169&sp​...

  • Missing base system device for Pavillion dv6700

    I have an HP Pavillion dv6700. P/N Kc317uA#ABA
    I am missing base system devices:
    PCI bus 2, devise 5, function 2 (code 28)
    PCI bus 2, device 5, function 4 (code 1)
    This happened after I had to restore a restore a set point.
    Thanks

    Hi:
    You need this driver for the base system devices (card reader).
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-55777-1&cc=us&dlc=en&lc=en&...

  • Lenovo T530 – Base System Device driver Missing

    After rebooting from Linux (Ubuntu 12.10) into Windows 7 i noticed a “Base System Device”.
    i check the id material from that probleme;
    PCI\VEN_1180&DEV_E822&SUBSYS_21F617AA&REV_07
    PCI\VEN_1180&DEV_E822&SUBSYS_21F617AA
    PCI\VEN_1180&DEV_E822&CC_088001
    PCI\VEN_1180&DEV_E822&CC_0880
    i don't know how to fix that... Need help
    Thank you in advance
    Solved!
    Go to Solution.

    I have the same problem

  • Base System Devices missing for HP dv6500

    Hello people!
    I've 3 base system device drivers missing and an unknown device.
    HP Pavilion dv6500
    p/n= GT374EA#ABU
    The original was VISTA and now I've installed windows 8.1 Laptop cannot detect CD/ROM, speakers, microphone etc…
    Laptop cannot detect CD/ROM, speakers, microphone, webcam etc…
    Please help…
    Hardware IDs
    PCI\VEN_0180&DEV_0812&SUBSYS_308F003C&REV_12
    PCI\VEN_0180&DEV_0812&SUBSYS_308F003C
    PCI\VEN_0180&DEV_0812&CC_088000
    PCI\VEN_0180&DEV_0812&CC_0880
    PCI\VEN_0180&DEV_0803&SUBSYS_308F003C&REV_12
    PCI\VEN_0180&DEV_0803&SUBSYS_308F003C
    PCI\VEN_0180&DEV_0803&CC_088000
    PCI\VEN_0180&DEV_0803&CC_0880
    PCI\VEN_0180&DEV_0592&SUBSYS_308F003C&REV_12
    PCI\VEN_0180&DEV_0592&SUBSYS_308F003C
    PCI\VEN_0180&DEV_0592&CC_088000
    PCI\VEN_0180&DEV_0592&CC_0880

    Hello uesy,
    It appears that you're missing some device drivers after upgarding to Win 8.1.
    Unfortunately for that notebook, there were no drivers provided by HP after Windows Vista. The only driver support available would be what Windows installs for it during the install.
    Have you already tried going into the Device Manager and updating the drivers there?
    That would be the only other way.
    Sorry for the inconveince this may cause you.
    Thank you for posting on the HP Forums.
    I worked on behalf of HP.

  • T420 Base System Device Windows 7 64 bit

    Hello,
    I have Base System Device driver missing and wondered if someone could point me to the right direction. I have tried installing the Ricoh driver from the website to no avail. Tried many other from this site and others, still nothing :/
    Full model number: 4180-PR1
    OS: Windows 7 64 bit
    Hardware Ids:
    PCI\VEN_1180&DEV_E822&SUBSYS_213317AA&REV_08
    PCI\VEN_1180&DEV_E822&SUBSYS_213317AA
    PCI\VEN_1180&DEV_E822&CC_088001
    PCI\VEN_1180&DEV_E822&CC_0880
    Thank you
    T420 4180-PR1 - OS: Windows 7 Pro 64 bit

    Haha! I like the cut of your jib and the sound of your towne!
    Can you please post a screenshot link ( hosted at imgur - Photobucket - somephotosite) of your problem devices please?
    I myself have got 1xT420, 1xT520 and 1xW520 and I have never experienced any drivers missing after the intital run of System Update.
    Cheers!
    ThinkPad W540 (20BG) - i7-4800MQ/24GB // ThinkPad T440s (20AQ) - i7-4600U/12GB
    ThinkPad T440p (20AW) - i7-4800MQ/16GB // ThinkPad Helix (3698-6EU) - i5-3337U/4GB
    ThinkPad W520 (4282-W4Q) - i7-2720QM/32GB // ThinkPad T400 (2767-W1C) - P9500/8GB
    ThinkPad T61 (7665-CTO) - T7700/4GB // ThinkPad T60p (8741-C2G) - T7400/4GB

  • BASE SYSTEM DEVICE NOT INSTALL PROPERLY

    Hi, My server is Proliant DL 380P G8. One of the device driver not install properly.  Base system device properties hardware ids as below PCI\VEN_103C&DEV_3307&SUBSYS_3381103C&REV_05
    PCI\VEN_103C&DEV_3307&SUBSYS_3381103C
    PCI\VEN_103C&DEV_3307&CC_088000
    PCI\VEN_103C&DEV_3307&CC_0880 Please give me link for the right driver. Note:I read this forum, from one of the solution I to this linkhttp://www8.hp.com/us/en/drivers.html But after key-in my product detail I receive this message. "Downloads for this product are not available through this website.
    For Enterprise products you may find US-English downloads at the HP Software Depot.
    For HP Home and Home Office products, visit HP Customer Care.
    If you need additional help, you can contact your local HP representative for information on the specific update methods available for this product." Please help me. thanksthalib

    Worked great.
    Thanks for you help.

  • Upgraded to windows 7 now my Base System Device and Fingerprint Reader isn't working!

    I recently upgraded from Windows Vista Business to Windows 7 Ultimate and my Base System Device and Fingerprint Reader isn't working.  I've tried reading advice off of some forums here and even checked out what I can download from this site and also tried updating but each time it either says could not find updates, or when I  try dowloading from this site it says the program may have not installed correctly.  I'm stuck I don't know what else I can do, can someone help, I would appreaciate it greatly!
    CheerGurl313

    Ah if only life were so simple. I have been without a soundcard ever since upgrading to Windows 7, have spent hours on the Lenovo site trying to locate a driver, filling in all those little boxes, time after time to no avail. The drivers, if they exist at all, are being kept secret. There can be no other explanation. Have the same problem with the fingerprint thingy, but not bothered as the kids had learnt to bypass it anyway.
    Enjoying windows 7 in complete silence. If anyone wants to advise downloading a driver then fantastic, but give us a clue where it is hidden. 

  • Sat Pro 6000: Unknown Base System-device Windows XP Prof. v.2002 SP1

    Where can I find a diver for an unknown Base System-device?

    Hi
    All neccassery Toshiba drivers you can find on the official Toshiba site:
    Check this link:
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
    Bye

  • Missing driver for "Base System Device"

    Hi,
    I have a N200 (0769) with WIN7 (32 bit).
    In the Device manager I have two "other devices" with missing drivers named "Base System Device".
    I could'n find any of that.
    I try looking for the Hardwar IDs:
    PCI\VEN_1180&DEV_0592&SUBSYS_382C17AA&REV_0A
    PCI\VEN_1180&DEV_0592&SUBSYS_382C17AA
    PCI\VEN_1180&DEV_0592&CC_088000
    PCI\VEN_1180&DEV_0592&CC_0880
    PCI\VEN_1180&DEV_0843&SUBSYS_382B17AA&REV_01
    PCI\VEN_1180&DEV_0843&SUBSYS_382B17AA
    PCI\VEN_1180&DEV_0843&CC_088000
    PCI\VEN_1180&DEV_0843&CC_0880
    But with no success.
    Any help where can I find that?
    Thanks in advance
    Solved!
    Go to Solution.

    hi nadne,
      Welcome to Lenovo Community Forums!
    Can you try installing this driver
    Ricoh Multi Card Reader Driver
    7kss73ww.exe
    3.25 MB
    Hope this helps,
    Cheers!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Missing Base System Device Driver for Elitebook 8440p

    Missing Base System Device Driver for Elitebook 8440p

    Hi Doctorsherif,
    I am sorry, but to get your issue more exposure I would suggest posting it in the Commercial Forums since this is a commercial product or Business product. You can do this at
    http://h30499.www3.hp.com/hpeb/
    Thanks
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Maybe you are looking for

  • Generated JNLP and closing the original browser window

    Hi All, This is my first post so bear with me. Here is my problem. I am using Web Start for an application. I need to check to see if web start is installed or not. If it is NOT I need to auto-install if it is I need to call a servlet that dynamicall

  • Multiple images into a subform in a dynamic non-interactive adobe form

    I want to convert a set of images into a PDF (one page for each image) with Webdynpro. I'm trying with a non-interactive adobe form. I followed the tutorial "Dynamic Non-Interactive PDF Form". I've got a multiple Context node: 'Images' with a string

  • G/L account (URGENT)

    Hi All, At the moment when purchase requisitions are generated by the WBS element, in the Account assignment tab of the requisition, i see G/L account field being filled by a particular G/L account no. I would like to know where in customizing, is th

  • Openning a File from Unix OS

    Hi I have a File name and path that is located in Unix Dir. My ALV report displays this file name as one colum in the list. When user clicks on this file name that file needs to opened in a new window. This file can be *.PDF, *.jpg or *.doc Any one h

  • Client authentication

    I am working on a project which uses client authentiaction. So far I have successfully made a certificate signing request from the browser. I get the request in my servlet. Now I need to issue the certificate from the server using the public key that