Satellite A100-036: After XP installation some drivers are missing
I need some identify for memory technology drive and for SD host adapter because after I install XP windows i found all the identify in my System but those two things that i asked about it's not showin in my drive.
Please advice me how to return it back as usualy.. check the below pictures. It will show you the deferent between the pictures.. and will show the missing identify in my pc ..
http://www.l22l.com/l22l-up-1/e7949d42ff.jpg
http://www.l22l.com/l22l-up-1/a14bc219ee.jpg
thanks alot for you support..
The A100-036 is a one unit from the PSAANE series and you should choose this from the Toshiba driver page.
As said above download all available drivers and follow the instruction mentioned in the installation instruction document.
Then everything should run correctly
Similar Messages
-
How to find which drivers are missing?
My laptop model no is Hp Pavillion dv6 1337tx. Someday ago I installed Windows 7 32 bit OS and also installed all drivers from the HP site. Still in the device manager I can see som drivers are missing. What can those be and how can I identify those missing drivers and solve this problem?
I am attaching a screenshot of the device manager showing some drivers are missing.
This question was solved.
View Solution.Your image has not yet been approved by a moderator.
Determining what the devices are is a one at a time process. On each unknown device or device without drivers, right click on the device and select properties. In the properties window select the Details tab and hardware ids in the property dropdown. Post the PCI\VEN string as seen in the following image for each device here in your post. Once that is done we can let you know what the device is.
This is where the drivers for your notebook are located. Do you know which chipset is installed?
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
Need WXP drivers for Satellite A100-036
Hello!!
I have a satellite A100-036 and i need drivers for Windows XP.
Any suggestions?Hi
Why you dont check the different threads asking for the XP drivers on the A100 series.
This forum category contains a lot of such threads!!!
. My tip: Try the XP drivers from different Satellite A100 and Equium A100 series ;) -
Windows vista issues on Satellite A100-036
Hi. I have a Toshiba satellite A100-036 laptop with windows vista home basic 32 bit and I have the following problems.
1.They replace me the hard disk at a store. I only have the Toshiba recovery dvd that I used to format the windows. They told me that I can't use it any more because the restore partition of the disk is lost. If I want to do a format again what do I have to do?
2. Every time I turn on the laptop the touchpad scrolling doesn't work. I go to control panel > mouse and it shows me this message: "Unable to connect to synaptics pointing device driver. If you have installed another PS/2 pointing device driver please unistall the synaptics driver by clicking on the yes button. You then need to reinstall your pointing device driver for your external device again. Do you want to unistall the synaptics driver now?" I click No and after that it works again and the synaptics pointing device icon appear again in the task bar. If I restart the laptop it doesn't work again and I have to do the same things.
3. Every time I turn on the laptop the bluetooth doesn't work and the bluetooth icon doesn't appear in the task bar. I have to go to device manager, unistall the driver, go to control panel > bluetooth local com and it works again. Every time I turn on the laptop I have to do this.
4. Every time I turn on the laptop the security center is turned off and I have to turn it on or the automatic updates are off and I have to turn them on.
5. Some times it doesn't install the automatic updates and it shows me the error code 8000FFFF.
Could anybody help me? Thanks.> 1.They replaced me the hard disk at a store. I only have the Toshiba recovery dvd that I used to format the windows. They told me that I can't use it anymore because the restore partition of the disk is lost. If I want to do a format again what do I have to do?
If you have created the Toshiba Recovery Disk in the past, you can use it in connection with new HDD. The Toshiba Recovery Disk would set the notebook back to factory settings which mean that you will get installed Windows system, Toshiba drivers and additional software.
>2. Every time I turn on the laptop the touchpad scrolling doesn't work. I go to control panel > mouse and it shows me this message: "Unable to connect to synaptics pointing device driver. If you have installed another PS/2 pointing device driver please unistall the synaptics driver by clicking on the yes button. You then need to reinstall your pointing device driver for your external device again. Do you want to unistall the synaptics driver now?"
>I click No and after that it works again and the synaptics pointing device icon appear again in the task bar. If I restart the laptop it doesn't work again and I have to do the same things.
Go to Toshiba EU driver page and download the Synaptics touchpad driver. Install the touchpad driver and reboot the notebook. Usually this should fix your issue.
> 3. Every time I turn on the laptop the bluetooth doesn't work and the bluetooth icon doesn't appear in the task bar. I have to go to device manager, unistall the driver, go to control panel > bluetooth local com and it works again. Every time I turn on the laptop I have to do this.
This is strange. Usually the BT should work if BT stack was installed properly. Please note that you have to enable the BT using FN key (FN+F8). This combination enables and disables the WLan too. So ensure you did it correctly.
> 4. Every time I turn on the laptop the security center is turned off and I have to turn it on or the automatic updates are off and I have to turn them on.
Please check this: [Turn automatic updating on or off|http://windows.microsoft.com/en-us/windows/turn-automatic-updating-on-off#turn-automatic-updating-on-off=windows-vista]
> 5. Some times it doesn't install the automatic updates and it shows me the error code 8000FFFF.
[Error code 0x80000FFFF when you download updates on a Windows Vista-based computer|http://support.microsoft.com/kb/946414/] -
Satellite A100-036 - Microsoft OEM label are broken
Hi!
Microsoft OEM label on my Satellite A100-036 (s/n 37059063Q) was partially damaged, and i can't read product s/n (Windows Vista HB).
How I can repair this label? Or I must buy new OS?
Thanks.Hi
The serial key belongs to the Windows OS which is part of the Toshiba recovery image.
This means that in most cases you cannot use it in connection with other Windows versions.
Furthermore the Windows system which is part of the image is already activated so this serial key is not really needed
If you dont have a recovery disk (maybe you have forget to create it in the past) you could try to order this here: http://backupmedia.toshiba.eu/landing.aspx
But Im not quite sure if this would be possible due to the notebook age
Otherwise you need an Microsoft disk to install the Windows OS but in such case every Microsoft Windows disk is supplied with the own serial key -
I have Itunes on my PC. I used it to burn and copy music which I had on Itunes. I had some work done on my PC. Now when I open it a message comes up saying, that Itune drivers are missing,
reinstall Itunes.
I did that and I still get the same message. What am I doing wrong
PaulI'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
Crystal Report: ERROR - Some parameters are missing values
mine report it possesses a single parameter ....
this is the example of like tries of to change the value set up in the report...
ERROR: Some parameters are missing values
thanks help...
EXAMPLE:
<%@ page import="com.crystaldecisions.report.web.viewer.*"%>
<%@ page import="com.crystaldecisions.report.htmlrender.*"%>
<%@ page import="com.crystaldecisions.reports.reportengineinterface.*"%>
<%@ page import="com.crystaldecisions.sdk.occa.report.reportsource.*"%>
<%@ page import="com.crystaldecisions.sdk.occa.report.data.*"%>
<%@ page import="com.crystaldecisions.common.keycode.*"%>
<%@ page import="java.util.*"%>
<%
try {
IReportSourceFactory2 rptSrcFactory = new JPEReportSourceFactory();
String report = "report/ReportParametro1.rpt";
IReportSource reportSource = (IReportSource) rptSrcFactory.createReportSource(report,
request.getLocale());
Fields fields = new Fields();
ParameterField pfield1 = new ParameterField();
Values vals1 = new Values();
ParameterFieldDiscreteValue pfieldDV1 = new ParameterFieldDiscreteValue();
pfield1.setName("CICCIA");
pfieldDV1.setValue("SELECT descrizione, validoDa, validoA FROM tariffari");
pfieldDV1.setDescription("Query Dinamica....");
vals1.add(pfieldDV1);
pfield1.setCurrentValues(vals1);
fields.add(pfield1);
CrystalReportViewer viewer = new CrystalReportViewer();
viewer.setReportSource(reportSource);
// layout
viewer.setOwnPage(true);
viewer.setBestFitPage(true);
viewer.setHasLogo(false);
viewer.setHasRefreshButton(true);
// group navigation
viewer.setHasToggleGroupTreeButton(false);
viewer.setDisplayGroupTree(false);
// page navigation:
viewer.setHasGotoPageButton(false);
// print/export
viewer.setHasExportButton(true);
//viewer.setPrintMode(CrPrintMode.PDF);
viewer.setPrintMode(CrPrintMode.ACTIVEX);
viewer.setIgnoreViewStateOnLoad(true);
viewer.setParameterFields(fields);
viewer.setEnableParameterPrompt(false);
viewer.refresh();
viewer.processHttpRequest(request, response, getServletConfig().getServletContext(),
out);
viewer.dispose();
}catch(Exception e){
out.println("Errore " + e.getMessage());
%>
I am facing the same problem. After selecting an export option (PDF/RTF), the same error message is coming up.
Also, what needs to be done for displaying export option of EXCEL?
Thanks,
Farzal -
Just bought a nano and want to download some of my iTunes library. The "Music" button shows almost all my selections but some albums are missing, yet ONLY those albums appear on the nano icon on my desktop after being dragged there but none of the others. What's happening?
I've read some of the post here that I thought might help but they refer to titles (Music) and triangles in the "Devices" window which are nowhere to be seen when I open the "Devices" window.
I have iTunes 11.0.3 and Mac OS 10.6.8. Does this make a difference?I should mention that, for the first problem, I do make sure that my new tracks are stored in the folder where I told iTunes that my music is in. Also, when I say the cataloging of my library stops short of cataloging all my songs, I have tried leaving the computer unattended for days (my computer's sleep mode is disabled). It always stops before cataloging all of my music regardless of whether I am doing something else while iTunes is cataloging, or if I just let iTunes be the only program that's open during the cataloging process.
-
I am trying to install the latest version of Itunes so I can Sync with IOS7 but I keep getting an error message saying it can't dis-install the old version Missing itunes64 files.
I tried to just un-install the old version but my computer tell me it can't because some files are missing. I don't know how to find them or how to fixx my problem. Can anyone help?
ThanksI keep getting an error message saying it can't dis-install the old version Missing itunes64 files.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
'Some images are missing because they were deleted from the document'
Hi,
I created a document in Pages v5.2 last week and have just opened it and received the following message:
'Some images are missing because they were deleted from the document'
When I try and replace the missing images I get the following message:
'The image "filename" couldn't be inserted.'
When I try and reimport the original image I get the following message:
'The image "filename" couldn't be inserted. This image is of an unsupported type.'
If I try and insert an image that was not in the document before, in the same file format, it goes in fine.
If I insert the original image into a blank Pages document it goes in no problem.
I would also like to point out that the data folder still contains lots of versions of images in the document, but does not seem to have any of the ones I am actually using, which I guess is where the problem is. However I have no idea how or why these specific images have been deleted.
Any light on how this problem has come about, and the best possible way to fix it would be greatly appreciated.
AlexI have Pages v5.2.2 on OS X 10.9.4. I can not reproduce your stated issues with images in this version of Pages. I don't have a solution for you. See my test in the third paragraph. If I were experiencing this behavior, I would perform a Safe Boot to clear out System caches, and try again, before kicking Pages v5+ to the curb.
The Safe Boot would be pressing and holding the shift key at boot chime, and until a horizontal progress bar shows on the screen. At the eventual login screen, after you type your password — press and hold the shift key — press the right arrow to login, and release the shift key after the Finder menu bar appears. Then reboot normally.
I have created a new document. Dragged and dropped an image into it and saved. Exited Pages. Reopening worked fine. Deleted the image, and proceeded through the following steps, punctuated by save, exit, reopen, and deliberate image removal. Different .jpg image each time. About mid-way through the following item list, I rebooted the MBA just to throw some "spin" into the process. I did not perform a Safe Boot prior to this series of tests.
Toolbar > Media insert
Insert > Choose jpg into document
Text Box image fill
Shape image fill -
CRYSTAL XI SOME PARAMETERS ARE MISSING VALUES
I have a huge problem with parameters in crystal reports XI.
Iam developing using jdeveloper 10g and a jndi connection
I use th following code into my jsp
the report filelds are set correctly and they HAVE values
but after the execution of the following code
i get the following message
ERROR SOME PARAMETERS ARE MISSING VALUES
also I install both commonwinXI_chf and cXIwin_chf fixes from crystal and still nothing .Any solutions to this problem because Iam freaking out
for once more crystal reports XI supports sucks
my code:
IReportSource reportSource= (IReportSource)session.getAttribute("reportSource");
Fields fields=(Fields)session.getAttribute("reportFields");
CrystalReportViewer crViewer=new CrystalReportViewer();
crViewer.setReportSource(reportSource);
crViewer.setParameterFields(fields);
crViewer.setEnableParameterPrompt(false);
crViewer.refresh();
// my fields have values
crViewer.setOwnPage(true);
crViewer.setOwnForm(true);
crViewer.setPrintMode(CrPrintMode.ACTIVEX);
// if i set fields=crViewer.getParameterField then filelds variable is empty!!
try{
crViewer.processHttpRequest(request,response,getServletConfig().getServletContext(),out);
crViewer.dispose();
}catch(ReportSDKException e){
out.println(e);
}Sorry man sometimes i forget even my self!!
In order to connect crystal with JNDI you have to set the correct parameters
into CRConfig.xml
for example
<JDBCURL>jdbc:oracle:thin:@somewhere:ORA_DB</JDBCURL>
<JDBCClassName>oracle.jdbc.driver.OracleDriver</JDBCClassName>
<JDBCUserName>username</JDBCUserName>
<JNDIURL>t3://somewhere:7001</JNDIURL>
<JNDIConnectionFactory>weblogic.jndi.WLInitialContextFactory</JNDIConnectionFactory>
<JNDIInitContext>/</JNDIInitContext>
<JNDIUserName>weblogic</JNDIUserName>
also
you have to provide the same info into file
CRDB_JavaServer.ini
[CRDB_JDBC]
CacheRowSetSize = 100
JDBCURL =
JNDIURL =t3://somewhere:7001
JDBCUserName = guest
JNDIUserName = weblogic
JNDIConnectionFactory = weblogic.jndi.WLInitialContextFactory
JNDIInitContext = /
I put both files into WEB-INF classes directory
and finaly in both cases you have to include in your project the driver libs
in my case I use weblogic therefore I have included weblogic.jar into my classpath -
Some parameters are missing values
I am trying to invoke a crystal report using JRC API. I am using Business Objects XI.
When I try to invoke the report after setting all parameters I am getting an error message "Some parameters are missing values ". Here is how my JSP code looks like
ReportClientDocument oReportClientDocument = new ReportClientDocument();
oReportClientDocument.open(reportName, 0);
CrystalReportViewer oCrystalReportViewer = new CrystalReportViewer();
//set the reportsource property of the viewer
oCrystalReportViewer.setReportSource(reportSource);
//set viewer attributes
oCrystalReportViewer.setOwnPage(true);
oCrystalReportViewer.setOwnForm(true);
//set the CrystalReportViewer print mode
oCrystalReportViewer.setPrintMode(CrPrintMode.ACTIVEX);
//refresh the CrystalReportViewer if necessary (only required once)
if (session.getAttribute("refreshed") == null)
oCrystalReportViewer.refresh();
session.setAttribute("refreshed", "true");
String userid="emagia";
String password="emagia";
String rptuserid="tjordan";
String fromdate="07/01/2008";
String todate="07/12/2008";
ConnectionInfo ci = new ConnectionInfo();
ci.setUserName(userid);
ci.setPassword(password);
ConnectionInfos connections = new ConnectionInfos();
connections.add(ci);
oCrystalReportViewer.setEnableLogonPrompt(false);
oCrystalReportViewer.setDatabaseLogonInfos(connections);
ParameterFieldDiscreteValue val1 = new ParameterFieldDiscreteValue();
val1.setValue(rptuserid);
Values vals1 = new Values();
vals1.add(val1);
ParameterField param1 = new ParameterField();
param1.setName("User Id");
param1.setReportName("");
param1.setCurrentValues(vals1);
Fields fields = new Fields();
fields.add(param1);
ParameterFieldDiscreteValue val2 = new ParameterFieldDiscreteValue();
val2.setValue(fromdate);
Values vals2 = new Values();
vals2.add(val2);
ParameterField param2 = new ParameterField();
param2.setName("Date Range from");
param2.setReportName("");
param2.setCurrentValues(vals2);
fields.add(param2);
ParameterFieldDiscreteValue val3 = new ParameterFieldDiscreteValue();
val3.setValue(todate);
Values vals3 = new Values();
vals3.add(val3);
ParameterField param3 = new ParameterField();
param3.setName("Date Range To");
param3.setReportName("");
param3.setCurrentValues(vals3);
fields.add(param3);
oCrystalReportViewer.setEnableParameterPrompt(false);
oCrystalReportViewer.setParameterFields(fields);
oCrystalReportViewer.processHttpRequest(request, response,getServletConfig().getServletContext(), null);
oCrystalReportViewer.dispose();
In the Tomcat log this is what I get
- JRCAgent3 received request: refreshData
- JRCAgent3 attempting to acquire license
- JRCAgent3 successfully acquired license
- JRCAgent3 releasing license
- JRCAgent3 received request: getPromptConnInfos
- JRCAgent3 received request: compoundRequest
- JRCAgent3 received request: setSQLLogonInfoRequest
- JRCAgent3 received request: setSQLLogonInfoRequest
- JRCAgent3 received request: fetchReportPageRequest
- JRCAgent3 attempting to acquire license
- JRCAgent3 successfully acquired license
- Logon: Connecting to database using local JNDI server ...
- Connection Opened null
- Connection opened (Connection: databaseType=JDBC serverName=reports_dsn.dsn state=open databaseDriverName=crdb_odbc.dll).
- Report parameters is not valid
- Report parameters is changed
- Handling report parameters changes
- Validating report parameters
- com.crystaldecisions.reports.dataengine.l: Some parameters are missing values
- The report requires parameter values that need to be supplied by the client before further processing
com.crystaldecisions.reports.dataengine.l: Some parameters are missing values
at com.crystaldecisions.reports.dataengine.j.a(Unknown Source)
at com.crystaldecisions.reports.dataengine.a9.a(Unknown Source)
Can anybody tell me why I am getting this error??
Any help will be appreciated.The problem may be that you are setting your report date parameters as a string when you pass the value to the report. If the JRC does not recognize the parameter value as the correct type, it will throw the error you see when trying to pass them to the report.
If they are a date type or a date time type in the report, they must be set as such using the Java Calendar object.
Below is an example of how one would pass a date parameter to a report:
//DATE VALUE PARAMETER.
Calendar calendar = Calendar.getInstance();
calendar.clear();
calendar.set(2004, 1, 17);
Date dateParamVal = calendar.getTime();
pfieldDate.setName("dateParam");
pfieldDVDate.setValue(dateParamVal);
//Add the parameter field values to the Values collection object.
vals5.add(pfieldDVDate);
//Set the current Values collection for each parameter field.
pfieldDate.setCurrentValues(vals5);
//Add each parameter field to the Fields collection.
//The Fields object is now ready to be used with the viewer.
parameterFields.add(pfieldDate);
//DATE-TIME VALUE PARAMETER.
Calendar calendar2 = Calendar.getInstance();
calendar2.clear();
calendar2.set(2002, 5, 12, 8, 23, 15);
Date dateTimeParamVal = calendar2.getTime();
pfieldDateTime.setName("dateTimeParam");
pfieldDVDateTime.setValue(dateTimeParamVal);
//Add the parameter field values to the Values collection object.
vals6.add(pfieldDVDateTime);
//Set the current Values collection for each parameter field.
pfieldDateTime.setCurrentValues(vals6);
//Add each parameter field to the Fields collection.
//The Fields object is now ready to be used with the viewer.
parameterFields.add(pfieldDateTime);
//TIME VALUE PARAMETER.
Calendar calendar3 = Calendar.getInstance();
calendar3.clear();
calendar3.set(2002, 5, 12, 13, 44, 59);
Date timeParamVal = calendar3.getTime();
pfieldTime.setName("timeParam");
pfieldDVTime.setValue(timeParamVal);
//Add the parameter field values to the Values collection object.
vals7.add(pfieldDVTime);
//Set the current Values collection for each parameter field.
pfieldTime.setCurrentValues(vals7);
//Add each parameter field to the Fields collection.
//The Fields object is now ready to be used with the viewer.
parameterFields.add(pfieldTime);
Edited by: Merry Enns on Aug 5, 2008 8:11 PM -
When combine multiple PDFs into one, some letters are missing and display wrong letter
Hi all. I get a problem with combine multiple PDFs into a single PDF document. There are some PDF documents and they are working fine to open each document separately. But after I use Adobe Acrobat 8 Standard to combine them into one, some letters are missing and some display wrong letter (e.g. "forums" display "fo ums"). Our company has Adobe Acrobat 8 Standard, Adobe Acrobat 7 Professional and Standard. But all of them have some problem. Does anyone have idea for that? Please help me! Thanks very much!
I have a similar situation, but my PDFs look fine in Acrobat Pro 8,Acrobat Reader 8, and Apple preview, but are missing letters in Acrobat Pro 7. I think it stems from the files being combined all having the same font, but each having a unique subset stored in the respective files, but with the same name (and ID?), and when they are combined, the character sets are getting hosed somehow.
-
my apps are suddenly stop working periovously it was working very well but one day it stop i have run sfc/scannow to even try to to systen restore but there is no restore point & even i try to restore to factory setting but it showing some file are
missing even I update it to windows 8.1 update 1 but still same thing not even single app is working
in sfc/s014-04-13 13:14:03, Info CSI 000004cf [SR] Beginning Verify and Repair transaction
2014-04-13 13:14:12, Info CSI 000004d1 [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version =
6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-04-13 13:14:19, Info CSI 000004d3 [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version =
6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-04-13 13:14:19, Info CSI 000004d4 [SR] This component was referenced by [l:186{93}]"Microsoft-Windows-Printer-Drivers-Package~31bf3856ad364e35~amd64~~6.3.9600.16384.INF_prncacla"
2014-04-13 13:14:27, Info CSI 000004d5 [SR] Verify completcannow detail I get this resultand this the dism report
DISM report and It is showing that cammand cannot perform because of i/o devices error
2014-04-14 00:54:14, Info DISM PID=1208 TID=2820 Temporarily setting the scratch directory. This may be overridden by user later. - CDISMManager::FinalConstruct
2014-04-14 00:54:14, Info DISM PID=1208 TID=2820 Scratch directory set to 'C:\Users\R0027~1.JSA\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2014-04-14 00:54:14, Info DISM PID=1208 TID=2820 DismCore.dll version: 6.3.9600.16384 - CDISMManager::FinalConstruct
2014-04-14 00:54:14, Info DISM PID=1208 TID=2820 Scratch directory set to 'C:\$SysReset\Temp'. - CDISMManager::put_ScratchDir
2014-04-14 00:56:26, Info DISM PID=6888 TID=6828 Temporarily setting the scratch directory. This may be overridden by user later. - CDISMManager::FinalConstruct
2014-04-14 00:56:26, Info DISM PID=6888 TID=6828 Scratch directory set to 'C:\Users\R0027~1.JSA\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2014-04-14 00:56:26, Info DISM PID=6888 TID=6828 DismCore.dll version: 6.3.9600.16384 - CDISMManager::FinalConstruct
2014-04-14 00:56:26, Info DISM PID=6888 TID=6828 Scratch directory set to 'C:\$SysReset\Temp'. - CDISMManager::put_ScratchDir
2014-04-14 02:41:53, Info DISM PID=1068 TID=4108 Temporarily setting the scratch directory. This may be overridden by user later. - CDISMManager::FinalConstruct
2014-04-14 02:41:53, Info DISM PID=1068 TID=4108 Scratch directory set to 'C:\Users\R0027~1.JSA\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2014-04-14 02:41:53, Info DISM PID=1068 TID=4108 DismCore.dll version: 6.3.9600.17031 - CDISMManager::FinalConstruct
2014-04-14 02:41:53, Info DISM PID=1068 TID=4108 Scratch directory set to 'C:\$SysReset\Temp'. - CDISMManager::put_ScratchDir -
2 DRIVERS ARE MISSING - BOTH PLUG AND PLAY
I HAVE A HP PAVILION DV7 NOTEBOOK PC - MODEL - LM726AV - SERIAL - [Edited for Personal Information]. I UNINSTALLED NIS (NORTON)
BY MISTAKE. SINCE THEN 2 DRIVERS ARE MISSING.
1. BHD64RVX. 2. SYMANTEC IRON DRIVER. WHEN I TRIED TO REINSTALL NIS THE C URSOR IS FROZEN. I HAVE TO FORCE SHUT MY L.T.. PLS. HELP. THX. KRIS.
This question was solved.
View Solution.Thank you for visiting the HP Support Forums. I'm sorry to inform you that your post has needed some editing to remove personal information. From our Rules of Participation:
Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
Thank you
- I worked for HP.
Maybe you are looking for
-
Did iCloud just fry my iMac?!?
Maybe just coincidence, but right after doing all the iCloud and 10.7.2 upgrades and syncing, my iMac has shut down and won't restart! Won't power up at all! Anyone else have this problem?
-
Problems with Relation for char field (Forms 9i)
hi, people I have 2 DataBlocks. Every block has the same table of the database as a source. I create the relation between this two blocks. I use the primary key as a Join Condition. Primary key is the Char(10) field. All works OK until the value of t
-
Time Stamps on Email are 1 hour off after updating to 10.4.6
There appears to be a problem with time stamps on Emails after updating to Mac OS 10.4.6. I am using Entourage 11.2.1 and sending to a Microsoft's Exchange 2003 Server with SP1. If a 10.4.6 Mac sends to a 10.4.5 Mac, the time is wrong. If a 10.4.5 Ma
-
Session expired error after migration 11.1.1.1
We are taking a lots of session expired error after migrating our projects from 11.1.1.1. to the 11.1.1.0 How can we control session parameters in Jdev 11.1.1.1 and Web logic 10.1.3.1 ? Thanks.
-
Hi! Mein iPad2 geht nicht mehr richtig. Die Apps starten nicht mehr, lediglich der Bildschirm zuckt kurz schwarz. Aber ein "Numbers" oder "Pages" verweigert ebenso den Dienst, wie fast alle anderen Apps. Habt Ihr einen Tipp, welcher dieses Problem lö