Satellite A100-192 (PSAA9E) FN+F8 key not working after updating BT driver

I've just download the update for the Bluetooth driver "blt-mon-20071009150856" and install the "BtMon2Inst_v212" driver on my A100-192 (PSAA9E). after the installation of "Toshiba Bluetooth 4" driver the BT works fine.
BUT I can't use the wireless key (FN+F8) anymore to switch between Bluetooth and the Wireless device. I can disable/enable them only from the control panel or the ConfigFree utility.
Any idea how to bring the FN key back to life?
tnx.

>I have just check a strange thing - when the WLAN switch is off, if I press the FN+F8 it >DOES respond and telling me that "Wireless communication is disabled, Please turn on >the wireless communication switch" all the other FN keys works.
Described issue is definitely not strange. It is logic that you can not switch between WLAN/BT if the hardware is disabled. This function is the same for years and the same happen on all older notebooks.
I have two notebooks and both with WLAN/BT and if the WLAN driver and BT stack are preinstalled properly there should not be any problems. If the WLAN switch is set to ON you should be able to use both devices. Check also options in ConfigFree

Similar Messages

  • Keyboard delete and caps lock keys not working after update

    Shortly after a windows update two keys, delete and caps lock do not work. I have tried the following
    1. system restore..it says it cannot restore as a file is missing. I have used this function before without any problem.
    2. Update key board driver (standard PS/2)..it says latest version is installed.
    3. Uninstall and reinstall.
    4. Reset using the remove batteryt hold down power key option.
    The caps lock and delete does not work in Notepad or MS Word.
    It seems unlikely that the two keys themselves are damaged as it is unlikely that they would both fail at the same time and the problem after the windows undate is suspicious.
    I am using Windows 7 Home premium on a 64 bit HP G62.
    help appreciated as ever
    thanks
    matyiii

    matyiii wrote:
    Thanks I am beginning to suspect the same thing. I will try keyboard replacement as a last resort.....no fun to buy a new key board and have the problem persist...
    regards
    Matyiii
    Here's another test...since your laptop has USB ports get or borrow a USB keyboard and try it and if all those keys work and test then the results would mean your laptop keyboard has stop functioning as least you narrow done the problem.
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • Shift key not working after update Indesign CC

    I just updated Indesign CC and now the shift key does not do it's normal duty. Constraining propportions, making straight lines etc. How do i fix this?

    I enden up doing eveything : removing presets - turning off plug-ins  again and then did a restart on the computer (for the third time) and this time it worked. Don't really know exactly what the issue was but atleast it's fixed. Thanx!

  • Satellite A100-590 PSAA9E freezes on Toshiba welcome screen after BIOS update

    Hi.
    Yesterday I did a BIOS update on my Satellite A100-590 PSAA9E-03Z00QGR with the appropriate flash:
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?service=EU&selCategory =2&selFamily=2&selSeries=153&selProduct=624&langua ge=17&selOS=10&selType=all&yearupload=&monthupload =&dayupload=&useDate=null&mode=userMachines&search =&action=search&macId=&country=all&selectedLanguag e=17&type=all&page=1&ID=58477&OSID=-1&driverLanguage=42
    bios-20070709111839.zip
    After the flashing procedure the machine rebooted automatically, but unfortunately it now keeps hanging at the Thoshiba welcome screen. Also pressing F2 or F12 won't change anything. It seems like the BIOS is corrupt.
    I saw, that in the BIOS package are delivered two flash files (s10gm590.rom and s10pm590.rom). But just executing the SanAntonion10 BIOS590MP.exe a .vbs script is started that decides automatically chooses and loads a flash file. Maybe it chose the wrong one?
    What shall I do now? Is there a way to restore the BIOS, or do I have to send my notebook in?
    Thanks in advance
    MAT

    > Satellite A100-590 PSAA9E freezes on Toshiba welcome screen after BIOS update
    What to say Marc. It looks like you have used a wrong BIOS version or you have updated the BIOS in wrong way.
    You could try to access the BIOS and try to set the settings to default.
    Dont forget to save the settings if you will exit the BIOS.
    But if this procedure does not help, you will have to contact the ASP in your country.
    Possibly the guys will try to flash the BIOS again with other special version.
    Good luck
    Greetings

  • Some keybaord keys not working after suspect virus on Tecra A

    Apostrophe, delete, semicolon and end keys not working after a suspected virus attack. I found record of the same problem on the net but apparently this guy fixed his problem after he found scroll lock or num lock on.
    This is not the case here but there is something going on with numlock - register shows 2 and not 0. change to 0 but when reboot back to 2 again.
    Suspect changed back by bios. I thought i couldnt get to bios because DEL key not working but found ESC works.
    Tried to reset default values for bios but then cannot save and exit as this required the END key to work.
    I was running XP at the time of the (suspected) attack and could not rectify the problem so put the computer back to the OEM status which i hoped would help - it did not, same problem so rather than install all the software on the computer again with XP i upgraded to Windows7 - fresh install.
    Still keys do not work - it was a real pain to start with as my computer was set up to ctl+alt+del to log in and i had to do this with on screen keyboard - XP - this also showed that numlock was on before and after windows boot.
    The reason i suspect a virus - my wife was watching one of her tv shows on line from home country (another toshiba laptop) and i needed to use that laptop for something else so i asked her to use mine - later on we turned the laptops off and in the morning turned tham back on again, the other laptop with AVG virus protection flagged several hits and this one with (FAMOUS and completely up to date) Norton flagged nothing - once i got into it using on screen keyboard.
    Problems with this computer was found after scanning with a different antivirus.
    Anyway - i am left with 4 keys that do not work on my keyboard (actually they did work after i logged into the computer for the first time but i had to hold them in for a long time - and then next time i rebooted, not work at all and havent ever since)
    Any assistance here would be greatly appreciated, i have been working on this all weekend with no joy at all.
    Thanks in advance.

    Thanks Xardas,
    I have essentially done both - tried Toshiba OEM status found on a small partition of the toshi hard drive - no good - then did a fresh install of Windows 7 - still no good
    You know - as cunning as it sounds - i cannot reload the default settings in BIOS as it requires the END key to work so i can Save & Exit - all i can do is Exit Without Save - i sort of feel snookered at the moment.
    Toshiba got back to me today and said that i have tried everything they would have (yeah for sure) and to take my machine into a service centre for a hardware check - yeah right on boys!
    Check out this guys post below found on Kioskea.net - getting close to a year ago...
    ms ml - Nov 10, 2009 12:52am GMT
    Hi there, I was hoping that you might be able to help me with the problem that I seem to be having with my Toshiba Satellite Laptop Keyboard too. For a few days now I havent been able to use a few of the keys on my keyboard, including (1) delete (the backspace key is still working though), (2) colon/semicolon, (3) apostrophe/quotation marks and (4) end (the home and PgUp and PgDn keys are still working though). Any suggestions?
    Identical to my problem....obviously this guy had the same problem as well...see below - same thread.
    yab - Feb 9, 2010 4:47am GMT
    hi did you ever figure this out? i have the same exact problem...
    However, i was not able to solve my problem the way this guy did - my scroll lock is not activated - it seems to work ok (on and off) i tested it using Excel to move around the cells.
    yab ms ml - Feb 9, 2010 7:57am GMT
    Nevermind. For me it was scroll lock. My apostrophe, semicolon, and delete keys are alive and working again. I hope you have the same easy fix.
    Incidently - never hear from the first guy again - probably ended up being his scroll lock.
    all sugestions welcome - sorry my smily face has no eyes -) guess why!

  • 7 u j m keys not working after 10.8.1 upgrade, late 2008 aluminum Macbook

    That's all, these keys do not work after update/upgrade today. They were working fine right before i did the update and are not working now. If I hit the M ket a few times i do get some garbage. Help?

    Thanks, but still the same. It boot normally only if there isn't any usb device attach to the computer. I'm using usb mouse instead of bluetooth mouse and it happens not to boot normally like usual.
    The technician said it would be okay if any usb devices attach to the computer during the boot apparently it won't boot normally.
    Any alternative sir?

  • "F11 System Recovery" during boot does not work after Cloning hard drive.

    Problem: “F11 System Recovery” during boot does not work after Cloning hard drive.
    HP Envy m6-1125dx UEFI Notebook Computer with GPT hard drive.
    Original Seagate Hard Disk GPT 700GB with Window 8.0_64 upgraded to Windows 8.1_64
    Startup Menu (F11 System Menu works properly) only on original hard drive.
    Following obtained from Disk Management & diskpart in Command Prompt.
                                     GPT Disk <700GB>
    Partition 1 WINRE NTFS Primary 235MB/400MB [Recovery]
    Partition 2 EFI System FAT32 (LBA) Primary 108MB/260MB [System]
    Partition 3 (NONE) Unformatted Primary 128MB/128MB [Reserve]
    Partition 4 Main NTFS Primary 90GB/195GB [Primary “C”]
    Partition 5 (NONE) NTFS Primary 372MB/450MB [Recovery]
    Partition 6 Data NTFS Primary 7GB/475GB [Primary “E”]
    Partition 7 NTFS Primary 26MB/350MB [Recovery]
    Partition 8 Recovery NTFS Primary 24GB/26GB [Recovery “D”]
    I have Cloned the original hard drive to a new HGST 1TB Hard Drive using four different methods (sector by sector):
    Acronis True Image 2015
    Acronis Backup for PC
    AOMEI Backupper Professional
    Macrium Reflect
    Each time the cloning process completes successfully and has the same original partition arrangement. The computer works properly except when trying to use the “F11 System Menu” key during boot. It gives the following error message:
    “Recovery
    Your PC needs to be repaired
    A required device isn’t connected or can’t be accessed.
    Error code: 0xc0000225
    You need to use the recovery tools on your installation media. If you don’t have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer. “
    Any suggestions why the F11 System Recovery does not work during boot and how to fix the problem would be appreciated. I have does various disk checking and file checking on both the original and new hard drive with no errors.
    Thank you in advanced.

    Hi,
    How did you clone the HDD ? One-for-one or different method ?
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • F5 is not working after update of windows 8.

    f5 is not working after update of windows 8 in my laptop. Rest of the function keys are working.
    my laptop details are
           Product Name:    HP Pavilion 15-e008tu Notebook PC  

    Hello prem23,
    What did the F5 key do before? According to your manual in the Action Keys list (page 32-33), that key wasn't tied to anything unless its just for page refresh.
    If a Windows update breaks something, the best way I know to correct the problem is to uninstall that update.
    OR
    You can revert Windows back to an earlier state before the update with a Restore Point provided you didn't turn off that feature. If for some reason it is turned off, you will not be able to revert to that point as one was not created.
    After the restore, only install one windows update at a time until you find the culprit and uninstall it. This way you have the other updates installed. YES this can be a long process.
     http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c03327545&cc=us&dlc=en&lc=en

  • My new iPad sound is not working after updating to ios 6.1

    My new iPad sound not working after updating to ios 6.1. Headphones are working fine. I tried all the troubleshoot. can anyone know the answer, plz share with me

    Hi,
    I have exactly the same issue as everyone above. I only get sound through the slider on the ringtone in settings and through my headphones. I do not get any sound anywhere else at all.
    I Have tried:
    - Updating to iOS 6.1.3
    -re starting the device
    -checking that the device is not muted. My slider switch is set to mute rather than lock and is unmuted.
    -going into general settings and reset all settings
    -the device reset several times (waiting until I saw the all important apple logo)
    -removing the last few apps I installed.
    Nothing at all has worked, please help!
    New iPadiPad

  • Iphone 4 personal Hotspot not working after update to IOS 7.1 India BSNL cellular

    Iphone 4 personal Hotspot not working after update to IOS 7.1 India BSNL cellular

    BSNL is not a supported carrier. Personal Hotspot requires carrier support and provisioning of the account to enable it. iOS 7.1 disabled the ability to manually configure Personal Hotspot on unsupported carriers.

  • HT1688 My Hot Spot does not work after update to 6.0.1.  Service is with ATT.  Apple says problem is with ATT, ATT says problem is with Apple.  Anyone else having this problem?

    My Hot Spot does not work after update to 6.0.1.  Any suggestions?

    Ok, I had the same issue, my phone is unlocked(iphone 5 with 6.1.3). So I went to the apple store and had it replaced. it worked good for a day and started doing the same thing. When the apple tech replaced my phone, he transfered my screen protector to the new one.
    so I thought it was my sim card, I put in my sisters sim card from a different carrier and it did the same, so then I was like let me take off the screen protector, and that was it.
    so guys, if you have a screen protector on your phone and it's doing "low signal", "No Service", "Searching", "Full bars cycle" then take off the screen protector. so far my phone is working normal.

  • Click to activate does not work after update

    Click to activate plugin does not work after updating to version 23.0.1

    hello Kamullia, if you have set click-to-play to true in about:config you can now go to the ''addons-manager > plugins'' section and set the permissions individually for each plugin type.

  • WiFi iPhone 4S does not work after update iOS 6.0

    WiFi iPhone 4S does not work after update iOS 6.0

    This sounds more like a hardware issue.
    Have you checked that the dock connector port is not dirty?

  • 3G is not working after updating to iOS 6.1

    My 3G connection is not working after updating to iOS 6.1. I have tried all possible solutions like resetting the network, restarting the phone etc.
    With this kind of bugs in every update, Apple will no more be THE Apple.
    There are bugs which have not been fixed even in the subsequent updates. SMSs going blank being one of them.
    Miss you Sir Jobs.....

    I have since managed to sort mine out - when the phone was updated it wiped out the network settings. 
    I was able to reset them by manually putting the information in:
    Settings - General - Cellular - Cellular Data Network and then I put in the correct details for APN, username and Password in the relevant sections and now it works OK.
    Hopefully it will work for others too

  • Problem with new version 4.3.2 apps not working " after update to the new version "

    Problem with new version 4.3.2 apps not working " after update to the new version "
    i was in 4.3.1 then i do the update , but now after update i face this problem , so what i Supposed to do ?!!

    Hi There
    Had the same problem as you. App would terminate when launched.
    Solution to working You Tube app:
    -Go to playstore
    - Uninstall app (it doesn't remove the app, only removes the update)
    - "Et Voila", working again.
    This doesn't correct the problem, it's just a workaround for you to be able to use youtube app again.
    Hope it helped.
    Best Regards

Maybe you are looking for